imgalt

GOST 23279-85

ГОСТ 23279-85

Welded reinforcing meshes for reinforced concrete structures and products. General specifications

Сетки арматурные сварные для железобетонных конструкций и изделий Общие технические условия

Status: Not effective - Superseded. Registration information 1306-st dated 11.29.2012

The standard applies to welded flat and rolled meshes produced in the construction industry from reinforcing steel with diameters from 3 to 40 mm inclusive, with the location of the rods in two mutually perpendicular directions and intended for the reinforcement of precast and monolithic reinforced concrete structures and products.

Стандарт распространяется на сварные плоские и рулонные сетки, изготовляемые на предприятиях строительной индустрии из арматурной стали диаметрами от 3 до 40 мм включительно, с расположением стержней в двух взаимно перпендикулярных направлениях и предназначенные для армирования сборных и монолитных железобетонных конструкций и изделий.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Gosstroy of the USSR (State Committee of the Council of Ministers of the USSR for Construction), 11/28/1984

SKU: RUSS17378

Price: $151.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Regulations » Documents System of normative documents in construction » 5. Regulatory documents for building structures and products » k.52 Reinforced concrete and concrete structures »

Welding regulations » Welding work »

Welding regulations » Main materials »

Welding regulations » Metal structures »

Welding regulations » Documentation »

Welding regulations » Non-destructive control »

Welding regulations » Mechanical Testing »

Welding regulations » Main materials » Steel, cast iron »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.12 Testing and control of products of metallurgical industry » 4.12.4 Iron and steel products »

ISO classifier » 77 METALLURGY » 77.140 Iron and steel products » 77.140.65 Steel wire, wire ropes and link chains »

National standards » 77 METALLURGY » 77.140 Iron and steel products » 77.140.65 Steel wire, wire ropes and link chains »

ISO classifier » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.190 Fittings for buildings »

National standards » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.190 Fittings for buildings »

National Standards for KGS (State Standards Classification) » Latest edition » Zh Construction and building materials » Zh3 Building structures and parts » Zh33 Stone, brick, concrete and reinforced concrete structures and parts »

National Standards for OKSTU » METAL PRODUCTS FOR INDUSTRIAL PURPOSE (HARDWARE) » Steel welded reinforcing mesh »


The Document is Replaced With:

GOST 23279-2012: Welded reinforcing meshes for reinforced concrete structures and products. General specifications.

As a Replacement Of:

GOST 23279-78: Grids welded from rod reinforcement up to 40 mm in diameter. General specifications

The Document References:

GOST 10884-94: Thermomechanically hardened steel bars for reinforced concrete constructions. Specifications

GOST 10922-90: Welded reinforcing products and inserts, welded joints of reinforcement and inserts for reinforced concrete structures. General specifications

GOST 14098-91: Welded joints of reinforcement and inserts for reinforced concrete structures. Types, constructions and dimensions

GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications

GOST 5781-82: Hot-rolled steel for reinforcement of ferroconcrete structures. Specifications

GOST 6727-80: Cold-drawn low-carbon steel wire for reinforced concrete. Specifications

GOST 7502-98: Measuring metal tapes. Specifications

SN 393-78: Instructions for welding of reinforcement joints and embedded parts of reinforced concrete structures

The Document is Referenced By:

GOST 10922-2012: Welded reinforcing products and inserts, welded, lap and mechanical joints for reinforced concrete structures. General specifications

GOST 10922-90: Welded reinforcing products and inserts, welded joints of reinforcement and inserts for reinforced concrete structures. General specifications

GOST 11024-2012: Concrete and reinforced concrete panels for external walls of residential and civil buildings. General specifications

GOST 11118-2009: Autoclaved aerated concrete panels for external walls of buildings. Specifications

GOST 12504-80: Concrete and reinforced concrete panels for internal walls of residential and civil buildings. General specifications

GOST 13015-2003: Concrete and reinforced concrete products for construction. General technical requirements. Rules for acceptance, marking, transportation and storage

GOST 13015-2012: Concrete and reinforced concrete products for construction. General technical requirements. Rules for acceptance, marking, transportation and storage

GOST 17538-82: Reinforced concrete constructions and products for lift shafts of residential buildings. Specifications

GOST 18048-80: Reinforced concrete sanitary cabins. Specifications

GOST 19330-2013: Masts (poles) for overhead contact line supports of railways. Specifications

GOST 31310-2005: Wall three-layer reinforced concrete panels with energy-efficient insulation. General specifications

GOST 32209-2013: Reinforced for overhead contact line supports оf railways. Specifications

GOST 32488-2013: Exterior wall panels of claydite-concrete for residential and public buildings. Specificatiоns

GOST 32955-2014: Public roads. Trays for road drainage. Technical specifications

GOST 6665-91: Concrete and Reinforced Concrete Curbs. Specifications

GOST R 54270-2010: Masts (Poles) for overhead contact line supports of railways. Specifications

GOST R 54271-2010: Anchors for overhead and contact line supports of rail ways. Specifications

GOST R 54272-2010: Reinforced concrete foundations for overhead contact line supports of railways. Specifications

Manual: Manual for impulse and low consumption fire extinguishing systems

MDS 12-23.2006: Temporary recommendations on the technology and organization of construction of multifunctional high-rise buildings and building complexes in Moscow

MDS 12-65.2014: Project production work. Concreting of reinforced concrete structures of a building (structure) using concrete pumps

R 78.36.010-2000: Engineering and technical protection of non-telephone objects

R 78.36.032-2013: Engineering and technical fortification and equipment with technical means of protection of objects, apartments and MHIG, taken under centralized protection units of private security. Part 1

R 78.36.032-2014: Engineering and technical fortification and equipment with technical means of protection of objects, apartments and MHIG, taken under centralized protection units of private security. Part 2. Apartments and MHIG

RD 34.20.591-97: Procedural Guidelines for Preservation of Thermal Mechanical Equipment

RD 78.36.003-2002/MVD Rossii: Engineering and technical strength. Security equipment. Requirements and design standards for the protection of objects from criminal attacks

RD 78.36.006-2005: Choice and application of hardware of security and alarm systems and engineering safety measures for development of facilities

Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope

RTM 1.118-2-99: Recommendations for preventing the ascent of protective plastic tubes and for installing an access point during the construction of the FOL

RTM 393-94: Technical Guides for welding and quality control of the joints of reinforcement and embedded items of concrete elements

SNiP 2.03.01-84 Reference Manual: Reference manual on design of concrete and reinforced concrete structures made of heavy and light concrete without reinforcement prestressing

SNiP 3.06.04-91: Bridges and pipes

SP 35.13330.2011: Bridges and pipes. Updated living edition of SNiP 2.05.03-84

ST RK 1857-2008: Motor roads. Requirements at designing of supporting walls

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Unified system for design documentation. Types and sets of design documentation
Language: English
Price: $139.00
imgalt
Loads and impacts
Language: English
Price: $306.00
imgalt
Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads
Language: English
Price: $311.00
imgalt
Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
Language: English
Price: $333.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!