GOST 2695-83
ГОСТ 2695-83
|
|
Sawn timber of leaf-bearing species
Пиломатериалы лиственных пород
Status: Effective - Supersedes. The limitation of the effectiveness period has been lifted: Protocol No. 3-93 of the IGU dated 03.03.93 (IUS 5-6-1993)
The standard applies to sawn hardwood intended for use in the national economy. The standard does not apply to aviation lumber.
Стандарт распространяется на пиломатериалы лиственных пород, предназначенные для использования в народном хозяйстве. Стандарт не распространяется на авиационные пиломатериалы.
Choose Language:
Format: Electronic (pdf/doc)
Approved: USSR State Committee for Standards,
3/30/1983
SKU: RUSS17406
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
79 Wood processing technology »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.6 Testing and control of wood products »
4.6.1 Sawmill products »
ISO classifier »
79 WOOD PROCESSING TECHNOLOGY »
79.040 Wood, saw logs, sawn timber »
National standards »
79 WOOD PROCESSING TECHNOLOGY »
79.040 Wood, saw logs, sawn timber »
National Standards for KGS (State Standards Classification) »
Latest edition »
To Timber. Wood products. Cellulose. Paper, cardboard »
K2 Lumber and wood products »
K21 Lumber »
As a Replacement Of:
GOST 2695-71: Sawn timber of leaf-bearing species
The Document References:
GOST 10950-78: Sawn timber and semi-manufactures. Antiseptic methods of immersion
GOST 16369-96: Sawn timber transportation packages. Sizes
GOST 18288-87: Manufacture of sawn timber. Terms and definitions
GOST 19041-85: Transportation packages and multi-packages of sawn timber. Packaging, marking, transportation and storage
GOST 2140-81: Visible defects, of wood. Classification, terms and definitions, methods of measurement
GOST 24454-80: Sawn timbers of coniferous species
GOST 6564-84: Lumbers and blanks
GOST 6782.2-75: Lumber from hardwood
GOST 7016-82: Products of wood and wooden materials. Parameters of surface roughness
GOST 7319-80: Sawn timber and blanks of broad-leaved species. Atmospheric drying and storage
The Document is Referenced By:
GOST 10028-81: Glass capillary viscosimeters. Specifications
GOST 10198-91: Wooden boxes for weights of mass over 200 up to 20000 kg. General specifications
GOST 10316-78: Foil coated paper-based laminate and glass-cloth-base laminate. Specifications
GOST 10350-81: Wooden cases for light industry produce. Specifications
GOST 10403-80: Constructional steel trowels. Technical requirements
GOST 10597-87: Painting brishes. Specifications
GOST 10778-83: Spatulos. Specifications
GOST 11002-80: Wooden cases reinforced with wire. General specifications
GOST 11042-90: Construction steel hammers. Specifications
GOST 11127-78: Wooden drums for wire ropes. Specifications
GOST 11142-78: Plate boxes for personal defense means. Specifications
GOST 11214-2003: Windows of wood with glass. Specifications
GOST 112-78: Meteorological glass thermometers
GOST 11354-93: Returnable cases of wood and wood materials for food-stuffs and agricultural products. Specifications
GOST 11402-75: Blacksmith's hand and hammer tools. Chamfered nose sledge hammers. Design and dimensions
GOST 1142-90: Horse-driven load carriages. Specifications
GOST 11775-74: Moulding mallets. Design
GOST 11784-74: Rectangular finishing trowels. Design
GOST 12.2.012-75: Occupational safety standards system. Devices to ensure the safety of works. General requirements
GOST 12.4.091-80: Plastic miner's helmets
GOST 12.4.128-83: Safety helmets
GOST 12082-82: Roof boarding for consignments up to 500 kg. General specifications
GOST 12803-76: Steel connections. Specification
GOST 13276-79: Overhead line hardware. General specifications
GOST 13354-91: Gated wooden patterns. Specifications
GOST 13715-78: Glued boards. Specifications
GOST 13762-86: Measuring means for linear and angular measurements. Marking, packing, transporting and storage
GOST 1400-91: Handles for builder's axes. Specifications
GOST 14225-83: Wooden cases
GOST 14918-80: Continuously galvanized sheet steel. Technical conditions.
GOST 15623-84: Wooden cases for tools and accessories. Specifications
GOST 15987-91: Wooden bodied planes
GOST 16148-79: Wooden boxes for rolling bearings. Specifications
GOST 16511-86: Wooden boxes for electrical equipment. Specifications
GOST 16714-71: Non-mechanized hand fire instruments. Specifications
GOST 17041-77: Rulers for drawing instruments. Specifications
GOST 17151-2019: Utensils made of sheet aluminum. General specifications
GOST 17151-81: Cooking utensils made
GOST 17199-88: Fitter’s screwdrivers
GOST 17435-72: Drawing rulers. Specifications
GOST 1757-76: Hoes. Specification
GOST 17812-72: Multi-use wooden cases for vegetables and fruits. Specifications
GOST 18051-83: Wooden containers for heat-insulating materials and products
GOST 18088-83: Metal-cutting, diamond, wood-cutting and fitter's tools. Packing, marking, transportation fitter and auxiliary
GOST 1824-88: Elements and assembly units of upper wooden construction of bridging parks. General specifications
GOST 18343-80: Pallets for bricks and hollow clay tiles
GOST 18481-81: Glass hydrometers and cylinders. General specifications
GOST 18573-86: Wooden boxes for the production of chemical industry
GOST 18578-89: Builders axes. Specifications
GOST 18617-83: Wooden cases for hardware. Specifications
GOST 18711-96: Tent wooden members and assembly units. General specifications
GOST 18954-73: Gas sampling and storage glass apparatus and tubes (pipettes). Specifications
GOST 18975-86: Knife for finishing works. Specification
GOST 19596-87: Spades
GOST 19597-94: Garden rakes
GOST 19598-95: Lawn-and-garden hoes, grub-axes and cultivators
GOST 19822-88: Industrial container. Specifications
GOST 20131-80: Pattern plates
GOST 20463-75: Wooden cases reinforced with wire for vegetables and fruit. Specifications
GOST 20740-75: Beehives. Specifications
GOST 21133-75: Specialized box pallets for potatoes, vegetables, fruits, melons and gourds. Specification
GOST 21133-87: Specialized box pallets for potatoes, vegetables, fruits, melons and gourds
GOST 21399-75: Transport packs of non-ferrous metal pigs, cathodes and ingots. General requirements
GOST 22322-77: Linings for item packaging in wooden packing. General specifications
GOST 22831-77: Flat timber pallets gross weight 3,2 t, dimensions 1200x1600 and 1200x1800 mm. Specifications
GOST 22999-88: Portable hand-driven sprayers
GOST 2310-77: Steel bench hammers
GOST 23190-2018: Book-selling furniture. General specifications
GOST 23190-78: Bookselling furniture. General requirements
GOST 23478-79: Form for monolithic concrete and reinforced concrete structures erection. Classification and general technical requirements
GOST 23707-95: Small tools for tillage
GOST 23833-95: Commercial refrigeration equipment
GOST 23848-79: Motion-picture projectors for 16, 35 and 70 mm films. Marking, packing, transportation and storage
GOST 24634-81: Wooden boxes for export products. General specifications
GOST 24699-2002: Windows of wood with glass and glassing units. Specifications
GOST 24700-99: Windows of wood with glassing units. Specifications
GOST 25097-2002: Windows from wood and aluminium. Specifications
GOST 25782-90: Derbies, floats, semifloats. Specifications
GOST 26.006-79: Uniform system of standardization in instrument making. Measuring and automation devices. Marking, packing
GOST 26215-84: Hand-held wood-saws
GOST 26363-84: Power generating sets and mobile electric power stations with internal combustion engines. Rules of marking, parking, transportation and storage
GOST 26381-84: Disposable flat pallets general specifications
GOST 26584-85: Motorcycle helmets
GOST 26598-2018: Containers and means of packaging in building. General specifications
GOST 26598-85: Containers and means of packaging in building industry
GOST 26665-97: Metal bodies planes. Specification
GOST 26823-86: A summer garden cottage. General specifications
GOST 27002-86: Cooking utensils from corrosion-resistant steel
GOST 27840-2022: Packaging for parcels and packages. General technical conditions
GOST 27840-93: Containers for postal packages and parcels
GOST 28012-89: Demountable travelling stage. Specifications
GOST 28638-90: Bristle brush articles for household use. General specifications
GOST 2991-85: Wooden uncollapsible cases for weights up to 500 kg. General specifications
GOST 30091-93: Woodworking machines. Circular rip saws. Basic parameters. Standards of accuracy
GOST 30694-2021: Fire helmets. General technical requirements. Test methods
GOST 30734-2000: Roof wooden window blocks. Specifications
GOST 30972-2002: Glue wood billets and details for windows and doors. Specifications
GOST 3191-82: Railway cars of 1520 mm track gauge. Parts of wood and wooden materials. General specifications
GOST 3191-93: Railway cars of 1520 mm track gauge. Parts of wood and wooden materials. General specifications
GOST 32309-2013: Casting utensils of aluminium alloys. General specification
GOST 32309-2019: Dishes without non-stick coating cast from aluminum alloys. General specifications
GOST 3251-91: Rubber fabric oil-cloth lining
GOST 32583-2013: Stainless steel table and kitchen cutlery. General specifications
GOST 33757-2016: Flat wooden pallets. Specification
GOST 34117-2017: Cookware and tableware made of corrosion-resistant steel for children and teenagers. Technical conditions
GOST 34329-2017: Formworks. General specifications
GOST 34378-2018: Translucent enclosing structures. Windows and doors. Installation work execution, check and demands for results of works
GOST 34914-2022: Windows for industrial buildings. General technical conditions
GOST 4153-93: Pruning shears
GOST 4156-93: Pruning saws
GOST 4229-94: Colter knives. Specifications
GOST 4230-93: Garden knives
GOST 4295-80: Boxes made of boards for sheet glass
GOST 475-2016: Door Blocks wooden and combined. General specifications
GOST 4981-87: Wooden joists. Specifications
GOST 5151-79: Wooden drums for electrical cables and wires. Specifications
GOST 5959-80: Uncollapsable wooden sheet material boxes for weights to 200 kg mass. General specifications
GOST 6532-77: Band saws for sawing of wood. Specifications
GOST 6658-75: Products of paper and cardboard
GOST 7286-81: Wooden T-squares. Specifications
GOST 7319-2019: Lumber and hardwood blanks. Atmospheric drying and storage
GOST 7319-80: Sawn timber and blanks of broad-leaved species. Atmospheric drying and storage
GOST 7328-2001: Weights. General specifications
GOST 7328-82: General-purpose and reference mass gages
GOST 7566-2018: Metal product. Rules of acceptance, marking, packing, transportation and storage
GOST 7897-83: Blanks of hardwood timber
GOST 7945-86: Scoops for finishing works. Specifications
GOST 9.510-93: Unified system of corrosion and ageing protection. Aluminium and aluminium alloys semifinished products. General requirements for temporary anticorrosive protection, packing, transportation and storage
GOST 9078-84: Flat pallets
GOST 9338-2022: Plywood drums. Technical specifications
GOST 9338-80: Plywood drums. Specifications
GOST 9396-88: Boxes wooden reusable
GOST 9533-81: Trowels, tuck pointing tools. Specifications
GOST 9570-2016: Box and pestpallets. General specifications
GOST 9570-84: Box and post pallets
GOST 9574-2018: Gypsum сoncrete panels for partitions. Specifications
GOST 9574-80: Gypsum concrete panels for partitions. Specifications
GOST 9574-90: Gypsum concrete panels for partitions. Specifications
GOST 968-68: Sawn timbers (bars and boards) for aircraft
GOST 980-80: Flat ring saws for wood sawing
GOST 9933-75: Absolute pressure gauges and u-tubes combined pressure vacuum gauges
GOST R 51015-97: Blades for household and special use. General specifications
GOST R 51016-97: Sets of carbon steel and aluminium alloys. General specifications
GOST R 51162-2019: Dishes without non-stick coating cast from aluminum alloys. General specifications
GOST R 51162-98: Casting aluminium utensils. General specifications
GOST R 51687-2000: Stainless steel table and kitchen cutlery. General specifications
GOST R 52085-2003: Formworks. General specifications
GOST R 52116-2003: Utensils of cast-iron. General specifications
GOST R 52751-2007: Steel-fibro-concrete slabs for bridge spans. Specifications
GOST R 54156-2010: Table utensils made from stainless steel for children and teenagers. Specifications
GOST R 54577-2011: Modified wood. Specifications
GOST R 54912-2012: Modified wood for bear of slide. Specifications
GOST R 55760-2013: Generating sets driven by internal combustion engines. Rules of marking, packing, transportation and storage
GOST R 56071-2014: Products and billets of wood and wood materials for cultural and household use. Specifications
GOST R 56674-2015: Casting of aluminium alloys and solid stamping of sheet aluminium cookware with non-stick coating. General specifications
GOST R 56674-2018: Casting cookware of aluminum alloys with non-stick coating. General specifications
GOST R 58211-2018: Adhesives for floor coverings. General specifications
GOST R 58392-2019: Household services. Services in the manufacture of coffins for burial and cremation. General technical requirements
GOST R 58459-2019: Wooden structures. Determination of normative and calculated values of the mechanical properties of wood and materials based on it
GOST R 58515-2019: Trowel, shovels and cuts. Technical conditions
GOST R 58516-2019: Paint brushes and brushes. Technical conditions
GOST R 58518-2019: Steel construction hammers. Technical conditions
GOST R 58519-2019: Rules, graters and graters. Technical conditions
GOST R 58699-2019: Wood-aluminum window blocks. Technical conditions
GOST R 58700-2019: Wooden windows and balcony doors for low-rise residential buildings. Types, Design and Dimensions
GOST R 58755-2019: Mobile scaffolds, collapsible. Technical specifications
Manual: Manual for impulse and low consumption fire extinguishing systems
Manual for SNiP 3.04.01-87: Recommendations on the arrangement of floors (in development of SNiP 3.04.01-87 "Insulating and finishing coatings")
ONTP 02-86: National Engineering Design Standards for Machine-Building, Instrument-Building, and Metalworking Facilities. Woodworking Shops
ONTP 02-94: Sectoral norms of technological design of enterprises in the automotive industry. Woodworking shops (sites)
OST 13-15-79: Cutting boards for foods. Specifications
OST 13-158-83: Wooden returnable and reusable furniture container. Technical specifications.
OST 13-160-86: Corrugated cardboard boxes for furniture. Specifications
OST 13-39-80: Products of cultural and community purpose, for kitchen and household use of wood and wood materials. General specification
OST 24.013.20-90: Forged steel rollers for cold rolling of metals. Specifications.
OST 24.070.01-86: Products of mining machinery. General technical requirements.
OST 34-13-876-86: Hardwood lumber. Technical conditions (restriction GOST 2695-83)
OST 48-41-91: Engineering products of non-ferrous metallurgy. General Specifications.
POT R O 97300-01-95: Labor protection rules in the production of crop products
POT R O-13153-TsSh-877-02: Industry rules for labor protection during maintenance and repair of signaling, centralization and blocking devices on federal railway transport
POT R O-97300-11-97: Rules for labor protection in the repair and maintenance of agricultural machinery
R 547-84: Manual on the technology and organization of transportation, loading, unloading and storage of pipes of small diameters (100 - 500 mm) in the construction of gas pipelines
RD 31.83.04-89: Labour safety rules in companies of the Ministry of Navy of the USSR.
RD 32-CSR-110/34-03: Guidance document. Labor protection during the operation of buildings and structures and the repair and construction work at railway facilities
RD 34.03.204: Safety rules when working with tools and accessories
RD 34.10.354-88: Transformers Consumption of materials for repair
RD 34.46.605: Transformers at Voltage of 110-1150 kV, with Power of 80 MVxA and Above
Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope
Resolution 2128: On the procedure for determining the characteristics of timber and timber accounting
RMD 23-16-2012 Sankt-Peterburg: Recommendations for energy efficiency in residential and public buildings
RST RSFSR 161-88: Cooper products. General technical conditions
RST RSFSR 508-75: Electric Guitar. General technical requirements
RST RSFSR 516-88: Eaves metal. Technical conditions
RST RSFSR 580-77: Bows. General technical conditions
RST RSFSR 656-81: Apparatus for processing vegetables and fruits. Technical conditions
RST RSFSR 746-88: One-sided carriages. General technical conditions
RST RSFSR 91-78: Percussion musical instruments. General technical requirements
SNiP 2.02.05-87: Foundations of dynamic load machines
SNiP II-B.7-70: Foundations of machines with dynamic loads
SP 23-101-2000: Design of thermal performance of buildings
SP 23-101-2004: Design of thermal protection of buildings
SP 26.13330.2012: Foundations for machines with dynamic loads
SP 299.1325800.2017: Ventilation systems of highway tunnels. Design rules
SP 35.13330.2011: Bridges and pipes. Updated living edition of SNiP 2.05.03-84
SP 64.13330.2011: Wooden structures.
TU 102-162-78: Weighers prefabricated reinforced concrete belt type UBP
TU 102-190-78: Aluminum frame panels for walls of heated industrial buildings
TU 102-236-80: Panels of volume blocks of type OB and boxes of type UB
TU 102-237-85: Mobile buildings (inventory) of the block of the "Watch" system. Group specifications
TU 102-46-75: Weights prefabricated cantilever type UKS
TU 13-3225000-009-89: Soft reusable inventory container for furniture. Technical conditions
TU 13-533-83: Non-separable plank laths for furniture packing. Technical conditions
TU 26-01-949-85: The devices gummed with the mechanical mixing device of volume 1; 2; 3.2; 6.3; 10 and 16 m3
TU 5361-002-39430024-07: Hardwood boards
TU 5369-004-54965805-05: Wooden glued blanks and details for interior decoration
TU 5369-005-54965805-05: Sets of parts and products wooden for collapsible saunas
TU OP 13-0255095-29-91: The box is economic. Technical conditions
TU OP 13-0255095-88: Snow shovel. Technical conditions
VSN 136-78/Mintransstroj: Instructions for the design of auxiliary structures and devices for the construction of bridges
VSN 212-85: Guidelines for Acceptance, Stockpiling, Storage, and Transportation of Main Building Materials and Products at Outfitting Depots and Outfitting Departments of Construction Organizations Administered by Glavmosstroy
VSN 39-87: Ordinance for Planned Preventive Maintenance and Operation of Production Equipment at Construction Industry Companies Administered by the USSR Gosagprom. Part 1
VSN 462-85: Use of Cast Polyurethane Foam for Thermal Insulation of Piping and Equipment
VSN 9-94: Flooring Guidelines for Residential and Public Buildings
Customers Who Viewed This Item Also Viewed:
 |
Petroleum products. Method for measurement of viscosity by automatic capillar viscosimeter
Language: English |
Greases. Method for determination of ultimate strength and thermostrengthening
Language: English |
Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads
Language: English |
Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
Language: English |
Pipe fittings. Ball valves made of brass. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.