GOST 9923-80
ГОСТ 9923-80
|
|
Manual fire barrel. Specifications
Ствол пожарный ручной. Технические условия.
Status: Valid - Only in the Russian Federation
The standard applies to a manual fire barrel mounted on the end of a hose line and intended to form a compact or sprayed jet of water, as well as to block the flow of water. The standard establishes requirements for a manual fire barrel made for the needs of the national economy and export.
Стандарт распространяется на ручной пожарный ствол, устанавливаемый на конце рукавной линии и предназначенный для формирования компактной или распыленной струи воды, а также для перекрытия потока воды. Стандарт устанавливает требования к ручному пожарному стволу, изготовленному для нужд народного хозяйства и экспорта.
Choose Language:
Format: Electronic (pdf/doc)
Approved: USSR State Committee for Standards,
3/10/1980
SKU: RUSS17502
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
13 Environmental protection, protection of people from environmental exposure. Security »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
IV Fire safety »
3 Fire safety equipment »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.220 Fire protection »
13.220.10 Fire fighting »
National standards »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.220 Fire protection »
13.220.10 Fire fighting »
National Standards for KGS (State Standards Classification) »
Latest edition »
G Machines, equipment and tools »
G8 Machinery and equipment of universal application »
G88 Fire fighting vehicles, equipment and inventory »
National Standards for OKSTU »
CONSTRUCTION, ROAD AND UTILITY ENGINEERING PRODUCTS »
Fire fighting equipment »
The Document is Replaced With:
GOST 9923-2021: Fire fighting equipment. Hand fire barrels. General technical requirements. Test methods
As a Replacement Of:
GOST 9923-67: Fire hose nozzles
The Document References:
GOST 10144-89: Enamels XB-124Specifications
GOST 10354-82: Polyethylene film Specifications
GOST 12.2.003-91: Industrial equipment. General safety requirements
GOST 12.2.037-78: Fire engineering. Safety requirements
GOST 12.4.026-76: Signal colors and safety signs
GOST 13837-79: General purpose dynamometers
GOST 14192-77: Marking of cargoes
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 15152-69: Unified system of corrosion and ageing protection. Industrial rubber products for tropics. General requirements
GOST 16093-81: Basic norms of interchangebility. Metric screw thread. Tolerances. Clearance fits
GOST 16272-79: Technical plasticized polyvinylchloride film. Specifications
GOST 16338-85: Low-pressure polyethylene. Specifications
GOST 166-89: Vernier callipers. Specifications
GOST 17759-72: Threaded plug-gauges with full form of thread of diameters from 52 to 100 mm. Design and basic dimensions
GOST 17762-72: Threaded plug-gauges with incomplete form of thread of diameters from 105 to 300 mm. Design and basic dimensions
GOST 17763-72: Threaded plug-gauges with full form of thread of diameters from 1 to 100 mm. Design and basic dimensions
GOST 17764-72: Threaded ring-gauges with incomplete form of thread of diameters from 2 to 100 mm. Design and basic dimensions
GOST 17765-72: Threaded ring-gauges with full-form of thread of diameters from 105 to 300 mm. Design and basic dimensions
GOST 17766-72: Threaded ring-gauges with incomplete form of thread of diameters from 105 to 300 mm. Design and basic dimensions
GOST 18925-73: Screw plug-gauges with full form gaging members for pipe cylindrical threads from 1 3/4 'up to 3 3/4' nominal diameter. Construction and basic sizes
GOST 18926-73: Screw plug-gauges with truncated form gaging members for pipe cylindrical thread from 1 3/4'up to 3 3/4' nominal diameter. Construction and basic sizes
GOST 18929-73: Full form screw ring-gauges for pipe cylindrical threads from 1/16' up to 3 3/4' nominal diameter. Construction and basic sizes
GOST 18930-73: Truncated form screw ring-gauges for pipe cylindrical threads from 1/16' up to 3 3/4' nominal diameter. Construction and basic sizes
GOST 2.601-68: Unified system for design documentation. Exploitative documents
GOST 24634-81: Wooden boxes for export products. General specifications
GOST 24705-81: Basic norms of interchangeability. Metric screw thread. Basic dimensions
GOST 2601-84: Welding of metals. Terms and definitions of basic concepts
GOST 2789-73: Surface roughness. Parameters and characteristics
GOST 2991-85: Wooden uncollapsible cases for weights up to 500 kg. General specifications
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 4366-76: Grease synthetic solidol. Specifications
GOST 481-80: Compressed asbestos fibre sheets and gaskets from it. Specifications
GOST 515-77: Bitumized and tarred packaging paper
GOST 6357-81: Basic norms of interchangeability pipe cylindrical thread
GOST 6557-89: Rubber rings for connection fitting. Specifications
GOST 8828-89: Base paper and two-layer waterproof packaging paper
GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements
GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations
GOST 9.104-79: Unified system corrosion of corrosion and ageing protection. Paint coatings. Croups of operation conditions
GOST 9.302-88: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Control methods
GOST 9.306-85: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Symbols
GOST 9347-74: Board for gaskets and gaskets cut of it. Specifications
GOST 9378-75: Surface roughness comparison specimens. Technical requirements
GOST 9569-79: Paraffin paper
GOST R 1.9-95: State system for standardization of Russian Federation. Procedure of production and service marking by accordance mark to state standards
The Document is Referenced By:
GOST R 50862-2005: Safes and strong rooms. Requirements and methods of tests for resistance to burglary and fire
GOST R 50862-96: Safes and strong rooms. Requirements and methods of test for resistance to burglary and fire
Indication G-822u: Standards for equipping facilities and rolling stock of federal railway transport with primary fire extinguishing means
NPB 151-96: Complete set of fire crane. General technical requirements. Test Methods
PND F 13.1.47-04: Methods for measuring the mass fraction of manganese in dust samples of industrial emissions by the photometric method
RD EO 1.1.2.09.0772-2008: Methods of assessing the technical condition and resource characteristics of systems and means of fire protection of nuclear power units
RD EO 1.1.2.09.0772-2012: Methods of assessing the technical condition and resource characteristics of systems and fire protection ?a nuclear power plants
Customers Who Viewed This Item Also Viewed:
 |
Unified system for design documentation. Types and sets of design documentation
Language: English |
Loads and impacts
Language: English |
Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads
Language: English |
Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.