GOST 28570-90

ГОСТ 28570-90

Concretes. Methods of strength evaluation on cores drilled from structures

Бетоны Методы определения прочности по образцам, отобранным из конструкций

Status: Valid - In exchange for 09/01/2019

This standard applies to all types of concrete according to GOST 25192 and establishes methods for determining their strength in precast and monolithic concrete and reinforced concrete structures and products. The standard should be applied, as a rule, in the inspection and expert testing of the strength of concrete in the structures of existing and reconstructed buildings and structures.

Настоящий стандарт распространяется на бетоны всех видов по ГОСТ 25192 и устанавливает методы определения их прочности в сборных и монолитных бетонных и железобетонных конструкциях и изделиях. Стандарт следует применять, как правило, при инспекционных и экспертных испытаниях прочности бетона в конструкциях действующих и реконструируемых зданий и сооружений

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 11

Approved: USSR State Building Committee, 5/24/1990

SKU: RUSS17506

Price: $105.93

English keywords: concrete; concrete products;

The Product is Contained in the Following Classifiers:

Construction (Max) » Regulations » Documents System of normative documents in construction » 6. Regulatory documents for building materials and products » k.62 Concretes and mortars »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 2 Tests for external factors » 2.3 Testing of products in construction »

ISO classifier » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.100 Building Materials » 91.100.30 Concrete and concrete products »

National standards » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.100 Building Materials » 91.100.30 Concrete and concrete products »

National Standards for KGS (State Standards Classification) » Latest edition » Zh Construction and building materials » Zh1 Construction materials » Zh19 Test methods. Packaging. Marking »

The Document is Replaced With:

GOST 28570-2019: Concrete Methods for determining the strength of samples taken from structures

The Document References:

GOST 10110-87: Circles diamond

GOST 10178-85: Portland cement and portland blastfurnace slag cement. Specifications

GOST 10180-90: Concretes. Methods for strength determination using reference specimens

GOST 10587-84: Uncured epoxy resins. Specifications

GOST 11108-70: Hard-metals bits for core exploratory drilling in medium hard. Specifications

GOST 12.1.005-88: General sanitary requirements for working zone air

GOST 12730.1-78: Concretes. Methods of determination of density

GOST 127-76: Specifications For Industrial Sulfur

GOST 16115-88: Diamond segment cut-off wheels of 1a1rss/c1 and1a1rss/c2 forms

GOST 18105-86: Concretes. Rules for the strength control

GOST 22266-76: Sulphate resisting cements. Specifications

GOST 22266-94: Sulphate-resistant cements. Specifications

GOST 24555-81: The state system of testing the production. The procedure of verification of testing equipment. General principle

GOST 24638-85: Annular diamond drills for reinforced concrete constructions

GOST 25192-82: Concretes. Classification and general technical requirements

GOST 26433.1-89: System of ensuring geometrical parameters accuracy in construction. Rules of measurement. Prefabricated elements

GOST 8.326-89: State system for ensuring the uniformity of measurements. Metrological certification measuring instruments

GOST 8736-85: Sand for construction work. Technical requirements

GOST 8736-93: Sand for construction works. Specifications

GOST 9077-82: Ground pulverized quartz. General specifications

GOST R 8.568-97: State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles

TU 2-037-391-85: Diamond end mills with removable segments

TU 2-037-624-88: Diamond ring drills, type C2-3

TU 34-13-10500-82: Installation for cutting concrete URB-175

TU 34-13-10910-85: Installation for concrete cutting URB-300

TU 6-02-594-85: Polyethylenepolyamine technical

The Document is Referenced By:

GOST 10060.3-95: Concretes. Dilatometric rapid method for the determination of frost-resistance

GOST 10060.4-95: Concretes. Structure-mechanical rapid method for the determination of frost-resistance

GOST 10060-2012: Concretes. Methods for the determination of frost-resistance

GOST 10180-2012: Concretes. Methods for strength determination using reference specimens

GOST 10180-90: Concretes. Methods for strength determination using reference specimens

GOST 12730.5-2018: Concrete Methods for determining water resistance

GOST 17608-2017: The concrete paving slabs. Specifications

GOST 17608-91: Footway concrete slabs. Specifications

GOST 17624-2012: Concrete. Ultrasonic method of strength determination

GOST 18105-2010: Concretes. Rules of control and norm of an assessment of quality.

GOST 18105-2018: Concrete Rules for control and strength assessment

GOST 19222-84: Arbolit and its products. General specifications

GOST 19570-2018: Panels made of autoclaved aerated concrete for floors of residential and public buildings. Technical specifications

GOST 22690-2015: Concretes. Determination of strength by mechanical methods of non-destructive testing

GOST 25697-2018: Reinforced concrete slabs for balconies and loggias. General specifications

GOST 25820-2000: Lightweight aggregates concretes. Specifications

GOST 25820-2014: Lightweight aggregates concretes. Specifications

GOST 26633-2012: Heavy-weight and sand concretes. Specifications

GOST 26633-2015: Heavy-weight and sand concretes. Specifications

GOST 26633-91: Heavy-weight and sand concretes. Specifications

GOST 27005-2014: Light-weight and cellular concretes. Rules for control and assessment density

GOST 28840-90: Machines for tension, compression and bending tests of materials

GOST 29167-91: Concrete. The determination methods of fracture toughness characteristics

GOST 31356-2007: Dry building cement binder mixes. Test methods

GOST 31357-2007: Dry bulding cement binder mixes. General specifications

GOST 31358-2007: Dry building flooring cement binder mixes. Specifications

GOST 31914-2012: High-strength heavy-weight and fine-grane concrete for situ-casting structures. Rules for control and quality assessment

GOST 32803-2014: Self-stressing concrete. General specifications

GOST 6665-91: Concrete and Reinforced Concrete Curbs. Specifications

GOST 6927-2018: Сoncrete slabs for wall facing. Technical requirements

GOST 7473-94: Ready-mixed concrete. Specifications

GOST 8829-2018: Prefabricated reinforced concrete and concrete products. Load test methods. Rules for evaluating strength, stiffness and crack resistance

GOST R 42.4.01-2014: Civil defence. Civil defence constructions. Test methods

GOST R 53231-2008: Concretes. Rules for control and assessment of strength

GOST R 55567-2013: The order of the organization and conducting technical engineering studies on researches on objects of cultural heritage. Monuments of history and culture. General requirements

GOST R 55908-2013: Floors. Method of the covering slipperiness evaluation

GOST R 56731-2015: Anchors for use in concrete. Test methods

GOST R 58277-2018: Dry mixes for building on cement binder. Test methods

GOST R 58336-2018: Anchor angles. Test methods

Manual for MGSN 2.07-01: Inspection and monitoring during the construction and reconstruction of buildings and underground structures

Manual for MGSN 2.09-03: Corrosion protection of concrete and reinforced concrete structures of transport facilities

MDS 11-17.2004: Rules for the inspection of buildings, structures and complexes for liturgical and auxiliary purposes

MDS 12-23.2006: Temporary recommendations on the technology and organization of construction of multifunctional high-rise buildings and building complexes in Moscow

MDS 13-20.2004: Comprehensive methods for the inspection and energy audit of reconstructed buildings. Design Guide

MDS 13-24.2010: Recommendations on the rules of geotechnical support of high-rise construction and adjacent space

MI 2489-98: Recommended Practice. National Measurement Standards. Cement Materials. Method for Accelerated Determination of Freeze-Thaw Resistance of Concrete (Grout) According to Structural Mechanical Characteristics

MI 2625-2000: Recommended Practice. National Measurement Standards. Cement Materials. Accelerated Method for Measuring Water Impermeability

MRDS 02-08: Manual on scientific and technical support and monitoring of buildings and structures under construction, including long-span, high-altitude and unique

ODM 218.2.035-2013: Recommendations for the use of fly ash in concrete foundations of roads

ODM 218.2.044-2014: Recommendations for the performance of instrument and instrumental measurements in assessing the technical condition of bridge structures on highways

ODM 218.2.078-2016: Guidelines for the selection of the structure for strengthening the slopes of the road bed of public roads

ODM 218.3.008-2011: Recommendations for monitoring and inspection of retaining walls and retaining structures on landslide roads

ODM 218.3.012-2011: Cements for concrete coatings and road foundations

ODM 218.3.015-2011: Guidelines for the construction of cement concrete pavements in sliding forms

ODM 218.3.027-2013: Recommendations for the use of fabric composite materials in the repair of reinforced concrete structures of bridge structures

ODM 218.3.028-2013: Guidelines for the repair and maintenance of cement concrete pavements of roads

ODM 218.3.037-2014: Recommendations for monitoring the strength of cement concrete pavements and foundations of roads by sample

ODM 218.3.060-2015: Guidelines for the repair of pavements consisting of cement concrete pavements, covered with asphalt concrete pavements, on public roads

ODM 218.3.077-2016: Guidelines for justifying the parameters of design and technology in the repair of asphalt concrete pavements with layers of cement concrete

ODM 218.4.001-2008: Guidelines for the organization of inspection and testing of bridge structures on highways

ODM 218.4.002-2008: Guidelines for monitoring the status of existing bridge structures

ODM 218.4.026-2016: Recommendations for determining the carrying capacity of operated bridges on public roads. Concrete and reinforced concrete structures

OSN-APK Designing the integrated protection of reinforced concrete structures of industrial agricultural buildings and structures from the effects of corrosive environments

P 76-2000: Handbook for the design of concrete compositions for wear-resistant facings of hydraulic structures

RD 03-380-00: Guidelines for Inspection of Spherical Tanks and Gas Holders for Storage of Liquefied Gases Under Pressure

RD 03-410-01: Instructions on the procedure of comprehensive engineering certification of cryogenic tanks for liquefied gases

RD 03-420-01: Guidelines for Inspection of Reinforced Concrete Tanks for Petroleum and Petroleum Products

RD EO Methods for assessing the technical condition and residual life of building structures of nuclear power plants

Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope

RMD 32-18-2012 Sankt-Peterburg: Recommendations for the use of paving in the paving of residential and public business areas

RMD 32-18-2016 St. Petersburg: Recommendations for the use of paving in the construction of pavements for residential and public and business buildings

RTM 17-01-2002: Guiding technical materials on the design and use of steel-fiber-concrete building structures

RTM 17-02-2003: Guiding technical materials on the design and manufacture of steel-fiber-concrete structures on fiber, cut from sheet

RTM 17-03-2005: Guiding technical materials on the design, manufacture and use of steel fiber concrete structures on steel wire fiber

RTM 5-05-2009: Guiding technical materials for the design, manufacture and use of steel fiber concrete structures on the fiber of thin steel wire

SDA 24-2008: Rules for assessment (certification) of testing laboratories personnel

SDOS-04-2009: Construction control. Methodology for conducting construction control during construction, reconstruction, overhaul of capital construction facilities

SNiP 52-01-2003: Concrete and ferroconcrete structures. Principal rules

SO 34.21.343-2005: Rules for assessing the physicomechanical characteristics of concrete in hydraulic structures in use

SP 130.13330.2018: Production of prefabricated reinforced concrete structures and products

SP 13-102-2003: Rules of inspection of bearing structures of buildings and facilities

SP 164.1325800.2014: Strengthening of reinforced concrete structures by FRP composites. Rules for design

SP 291.1325800.2017: Armed grouted structures. Rules of architectural design

SP 329.1325800.2017: Buildings and structures. Rules of inspection after the fire

SP 349.1325800.2017: Concrete and reinforced concrete structures. Rules of structural reinforcement and repair

SP 37.13330.2012: Industrial transport

SP 394.1325800.2018: Buildings and complexes are high-rise. Terms of Use

SP 412.1325800.2018: The construction of foundations of high-rise buildings and structures. Work Rules

SP 435.1325800.2018: Monolithic concrete and reinforced concrete structures. Rules for the production and acceptance of work

SP 474.1325800.2019: Metro Rules for the inspection and monitoring of building structures of underground structures

SP 63.13330.2012: Concrete and reinforced concrete structures. General provisions.

SP 63.13330.2018: Concrete and reinforced concrete structures. Key Points

SP 70.13330.2012: Bearing and enclosing structures. Updated living edition of SNiP 3.03.01-87

SP 72.13330.2016: Protection of buildings, facilities and structures against corrosion

SP 78.13330.2012: Automobile roads

SP 79.13330.2012: Bridges and culverts. Rules of examination and test

STB 1538-2013: Technical means of traffic management. Bumps. General specifications

ST-NP SRO SSK-03-2013: Rules for monitoring and assessing the strength of concrete in monolithic structures

STO 95 12005-2017: Objects of use of atomic energy. Concrete work in the construction of the protective shell of the reactor installation of nuclear power plants. Basic requirements and quality control organization

Supplement to SP 63.13330: Toolkit. Calculation of reinforced concrete structures without prestressed reinforcement

TR 165-05: Technical recommendations on the establishment of durability (service life) of building materials and products

TR 166-04: Technical recommendations for quality assurance of concrete and mortar mixes and prevention of concrete corrosion in reinforced concrete structures

TR 182-08: Technical recommendations on scientific and technical support and monitoring of the construction of long-span, high-altitude and other unique buildings and structures

TSN 13-311-01: Inspection and assessment of the technical condition of buildings and structures

TU 5745-001-01386160-001: Dispersed concrete mixes-reinforced with steel fiber milled from slab

TU 5851-008-01388383-2002: Reinforced concrete beams with frame fittings for the superstructure of road bridges and overpasses with a length of 12, 15 and 18 m. Specifications

TU 5859-002-59565714-2012: Concrete protective flexible universal slabs

VSN 56-97: Design and Basic Principles for Technology for Production of Fiber Reinforced Concrete Structures

VSP 02.01.32/Russian Defense Ministry: Rules for the production and acceptance of work in the construction of aerodromes of the Armed Forces of the Russian Federation

VSP 32-02-03 MO RF: Rules for the production and acceptance of work in the repair of rigid airfield pavements

Customers Who Viewed This Item Also Viewed:

Steel structures
Language: English
Price: $297.00
Concrete with polysterene aggregates. Specifications
Language: English
Price: $308.76
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
Guidance on the selection of precautionary statements for the labelling in accordance with GOST 31340-2013
Language: English
Price: $301.95
Billet of rotor shafts and rings of turbine generators
Language: English
Price: $1,487.33
Vessels and apparatus. Norms and methods of strength calculation. Calculation of cylindrical and conical shells, convex and flat bottoms and covers
Language: English
Price: $287.10
Seismic building design code
Language: English
Price: $594.00
Aviation fuel for gas turbine engines JET A-1 (Jet A-1). Specifications
Language: English
Price: $150.66
On the approval of federal norms and rules in the field of industrial safety "General explosion safety rules for explosive and fire hazardous chemical, petrochemical and oil refining industries"
Language: English
Price: $819.95
Noxious substances. Classification and general safety requirements
Language: English
Price: $32.67
Safety valves of stream and hot-water boilers. Technical requirements
Language: English
Price: $57.42
Steam and hot-water boilers
Language: English
Price: $47.52
System of ensuring of geometrical parameters accuracy in construction. Manufacturing and assembling tolerances
Language: English
Price: $233.64
Manufacturing and quality control of steel structures for construction
Language: English
Price: $183.15
Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
Language: English
Price: $173.25
Rules of Electrical Installations Design (Russian Electrical Code). 7th Edition. All sections and exhibits
Language: English
Price: $478.76
Steel structures
Language: English
Price: $594.00
Buildings and structures foundations
Language: English
Price: $495.00
Pile foundations
Language: English
Price: $519.75
Basic norms of interchangeability. General tolerances. Limit deviations for linear and angular dimensions without tolerance indications
Language: English
Price: $37.62


RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!