GOST 26633-91
ГОСТ 26633-91
|
|
Heavy-weight and sand concretes. Specifications
Бетоны тяжелые и мелкозернистые Технические условия
Status: Not effective - Superseded. Registration information 1975-st dated 12/27/2012 (official site of Rosstandart); see IUS 5-2014
This standard applies to structural heavy and fine-grained concretes used in all types of construction.
Настоящий стандарт распространяется на конструкционные тяжелые и мелкозернистые бетоны, применяемые во всех видах строительства
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstroy of the USSR (State Committee of the Council of Ministers of the USSR for Construction),
5/16/1991
SKU: RUSS17509
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
6. Regulatory documents for building materials and products »
k.62 Concretes and mortars »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
2 Tests for external factors »
2.3 Testing of products in construction »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.100 Building Materials »
91.100.30 Concrete and concrete products »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.100 Building Materials »
91.100.30 Concrete and concrete products »
National Standards for KGS (State Standards Classification) »
Latest edition »
Zh Construction and building materials »
Zh1 Construction materials »
Zh13 Concretes and mortars »
The Document is Replaced With:
GOST 26633-2012: Heavy-weight and sand concretes. Specifications
As a Replacement Of:
GOST 10268-80: Heavy concrete. Technical requirements for fillers
GOST 26633-85: Heavy-weight and sand concretes. Specifications
The Document References:
GOST 10060.0-95: Methods for the determination of frost-resistance. General requirements
GOST 10060.3-95: Concretes. Dilatometric rapid method for the determination of frost-resistance
GOST 10060.4-95: Concretes. Structure-mechanical rapid method for the determination of frost-resistance
GOST 10178-85: Portland cement and portland blastfurnace slag cement. Specifications
GOST 10180-90: Concretes. Methods for strength determination using reference specimens
GOST 10181.0-81: Concrete mixtures. General requirement to test methods
GOST 10181-2000: Concrete Mixtures Test method
GOST 12730.1-78: Concretes. Methods of determination of density
GOST 12730.2-78: Concretes. Method of determination of moisture content
GOST 12730.3-78: Concretes. Method of determination of water absorption
GOST 12730.4-78: Concretes. Methods of determination of porosity parameters
GOST 12730.5-84: Concretes. Methods for determination of water tightness
GOST 13015.1-81: Prefabricated concrete and reinforced concrete constructions and products. Acceptance
GOST 13087-81: Concretes. Method of abrasion test
GOST 17623-87: Concrete. Radioisotope method of average density determination
GOST 17624-87: Concrete. Ultrasonic method of strength determination
GOST 18105-86: Concretes. Rules for the strength control
GOST 21718-84: Building materials. Dielectric method of measurement of moisture
GOST 22266-94: Sulphate-resistant cements. Specifications
GOST 22690-88: Concretes. Determination of strength by mechanical methods of nondestructive testing
GOST 22783-77: Concretes. Method of accelerated determination of compressive strength
GOST 23422-87: Building materials. Neutron method of humidity measurement
GOST 23732-79: Water for concretes and mortars. Specifications
GOST 24211-91: Concrete additives. General technical requirements
GOST 24316-80: Concrete. Methods of the determination of exothermic neat in concrete
GOST 24452-80: Concretes. Methods of prismatic compressive strengths, modulus of elasticity and Poisson ratio determination
GOST 24544-81: Concretes. Methods for determining shrinkage and creep deformations
GOST 24545-81: Concretes. Methods of fatigue tests
GOST 25192-82: Concretes. Classification and general technical requirements
GOST 25592-91: Mixes of fly-ash and slag of thermal plants for concretes. Specifications
GOST 25818-91: Thermal plant fly-ashes for concretes. Specifications
GOST 26134-84: Concretes. Ultrasonic method of frost resistance determination
GOST 26644-85: Slag crushed stone and slag sand fly-ash for concrete. Specifications
GOST 27006-86: Concretes. Rules for mix proportioning
GOST 27677-88: Corrosion protection in construction. Concretes. General requirements for testing
GOST 28570-90: Concretes. Methods of strength evaluation on cores drilled from structures
GOST 29167-91: Concrete. The determination methods of fracture toughness characteristics
GOST 30108-94: Building materials and elements. Determination of specific activity of natural radioactive nuclei
GOST 30459-2003: Additives for concretes and mortars. Methods of determining the efficiency
GOST 30459-96: Concrete additives
GOST 30515-97: Cements General specifications
GOST 4.212-80: Product-quality index system. Building. Concretes. Nomenclature of indices
GOST 5578-94: Slag crushed stone and slag sand of ferrous and non-ferrous metallurgy for concretes. Specifications
GOST 7473-94: Ready-mixed concrete. Specifications
GOST 8267-93: Crushed stone and gravel of solid rocks for construction works. Specifications
GOST 8269.0-97: Mauntainous rock road-metal and gravel, industrial waste products for construction works. Methods of physical and mechanical tests
GOST 8269.1-97: Mauntainous rock road-metal and gravel, industrial waste products for construction works Methods clicmical analysis
GOST 8735-88: Sand for construction work. Testing methods
GOST 8736-93: Sand for construction works. Specifications
SNiP 2.03.11-85: Corrosion protection of buildings structures
SNiP 52-01-2003: Concrete and ferroconcrete structures. Principal rules
ST SEV 1406-78: Concrete and reinforced concrete structures. Basic provisions in design
ST SEV 4421-83: Corrosion protection in construction. Protective properties of concrete in relation to the steel reinforcement. Electrochemical test method
The Document is Referenced By:
GOST 10629-88: Prestressed reinforced concrete sleepers for 1520 mm gauge railways. Specifications
GOST 11024-2012: Concrete and reinforced concrete panels for external walls of residential and civil buildings. General specifications
GOST 11024-84: Concrete and reinforced concrete panels for external walls of residential and civil buildings. General specifications
GOST 12.4.128-83: Safety helmets
GOST 12586.0-83: Reinforced-concrete vibrohydropressed pressure pipes
GOST 12767-94: Reinforced concrete solid slabs for floors in lange-panel buildings. General specifications
GOST 13015-2003: Concrete and reinforced concrete products for construction. General technical requirements. Rules for acceptance, marking, transportation and storage
GOST 13015-2012: Concrete and reinforced concrete products for construction. General technical requirements. Rules for acceptance, marking, transportation and storage
GOST 16349-85: Cyclic mixers for building materials
GOST 17079-88: Reinforced concrete blocks for ventilation. Specifications
GOST 17538-82: Reinforced concrete constructions and products for lift shafts of residential buildings. Specifications
GOST 17608-91: Footway concrete slabs. Specifications
GOST 18979-90: Reinforced concrete columns for multi-storey buildings. Specifications
GOST 18980-90: Reinforced concrete collar beams for multi-storey buildings. Specifications
GOST 19330-2013: Masts (poles) for overhead contact line supports of railways. Specifications
GOST 19330-91: Centrifugal reinforced concrete posts for railway line equipment. Specifications
GOST 19330-99: Centrifugal reinforced concrete posts for railway overhead line equipment. Specifications
GOST 19804.2-79: Prestressed reinforced-concrete driven square piles. Structure and dimensions
GOST 19804.6-83: Reinforced-concrete round hole built-up piles and tubular piles. Structure and dimensions
GOST 19804-2012: Reinforced prefabricated concrete piles. Specifications
GOST 19804-91: Reinforced concrete piles. Specifications
GOST 20213-89: Reinforced concrete roof trusses. Specifications
GOST 20372-90: Reinforced concrete rafter and longitudinal beams. Specifications
GOST 21506-2013: Reinforced concrete ribbed floor slabs of 300 mm depth for buildings and structures. Specifications
GOST 21506-87: Reinforced concrete ribbed floor slabs of 300 mm depth for buildings and structures. Specifications
GOST 21924.0-84: Reinforced-Concrete Slabs for Urban Road Pavements. Specifications
GOST 22783-77: Concretes. Method of accelerated determination of compressive strength
GOST 25214-82: Dense silicate concrete. Technical requirements
GOST 25592-91: Mixes of fly-ash and slag of thermal plants for concretes. Specifications
GOST 25607-94: Crushed stone-gravel-sandy mixtures for road and airfield surfacing and bases. Specifications
GOST 25628-90: Reinforced concrete columns for single-storey industrial buildings. Specifications
GOST 25697-83: Reinforced concrete slabs for balconies and loggias. General specifications
GOST 25818-91: Thermal plant fly-ashes for concretes. Specifications
GOST 25912.0-91: Reinforced concrete slabs for aerodrome pavement
GOST 26633-2012: Heavy-weight and sand concretes. Specifications
GOST 26992-86: Reinforced purloins for roofing in industrial and agricultural buildings. Specifications
GOST 27108-86: Reinforced concrete framework structures for multi-storeyed industrial buildings with floors without beams. Specifications
GOST 27215-2013: Reinforced concrete ribbed floor slabs of 400 mm depth for industrial buildings. Specifications
GOST 27215-87: Reinforced concrete ribbed floor slabs of 400 mm depth for industrial buildings. Specifications
GOST 28042-2013: Reinforced concrete roofing slabs for industrial buildings. Specifications
GOST 28042-89: Reinforced concrete roofing for enterprises buildings. Specifications
GOST 28737-90: Reinforced concrete foundation beams for buildings walls of industrial and agricultural enterprises. Specifications
GOST 30459-2008: Admixtures for concretes and mortars. Determination and estimate of the efficiency
GOST 30740-2000: Sealing materials used in joints of aerodrome coats. General specifications
GOST 31310-2005: Wall three-layer reinforced concrete panels with energy-efficient insulation. General specifications
GOST 31356-2007: Dry building cement binder mixes. Test methods
GOST 31357-2007: Dry bulding cement binder mixes. General specifications
GOST 31384-2008: Structural concrete protection against corrosion. General requirements
GOST 31424-2010: Non-metallic construction materials from sifting of crusting solid stone in aggregate manufacturing. Specifications
GOST 31970-2012: Traffic control devices. Test methods of roadside barriers
GOST 31994-2013: Traffic control devices. Roadside barriers. General technical requirements
GOST 32209-2013: Reinforced for overhead contact line supports оf railways. Specifications
GOST 32499-2013: Reinforced concrete multihollow slabs for floors in buildings for span to 9 m stand moulding. Specifications
GOST 32871-2014: Automobile roads of general use. Pipes for road culvert. Technical requirements
GOST 33129-2014: Automobile roads of general use. Road restraint systems. Methods of testing
GOST 6482-88: Reinforced concrete non-pressure pipes
GOST 6665-91: Concrete and Reinforced Concrete Curbs. Specifications
GOST 7473-2010: Fresh concrete. Specifications
GOST 7473-94: Ready-mixed concrete. Specifications
GOST 8020-90: Concrete and reinforced concrete structures for sewage, water and gas supply pipeline manholes. Technical specifications.
GOST 9561-91: Reinforced concrete multihollow panels for floors in buildings. Specifications
GOST 9758-86: Non-organic porous aggregates for construction work
GOST 9818-85: Reinforced concrete flights of steps and stair landings. Specification
GOST R 50970-2011: Тгаffic contгol devices. Guide posts. General technical requirements. Application rules
GOST R 52607-2006: Traffic control devices. Roadside barriers. General technical requirements
GOST R 52721-2007: Traffic control devices. Test methods for roadside barriers
GOST R 52751-2007: Steel-fibro-concrete slabs for bridge spans. Specifications
GOST R 54270-2010: Masts (Poles) for overhead contact line supports of railways. Specifications
GOST R 54271-2010: Anchors for overhead and contact line supports of rail ways. Specifications
GOST R 54272-2010: Reinforced concrete foundations for overhead contact line supports of railways. Specifications
GOST R 54747-2011: Ferro-concrete cross ties for railways for 1520 mm gauge railways. General specifications
GOST R 55260.1.3-2012: Hydro power plants. Part 1-3. Hydroelectric power station hydraulic installations. Concrete construction and reinforced concrete construction. Safety requirements
GOST R 55397-2013: Reinforced bitumen sheets for waterproofing of bridge decks. Preparation of test samples
GOST R 55892-2013: Objects of low-tonnage liquefied natural gas production and consumption. General technical requirements
GOST R 57277-2016: Cashpoints and payment terminals. Means of technicals defense. Requirements and methods of test for resistance to separation and burglary
Manual: Manual for impulse and low consumption fire extinguishing systems
Manual for MGSN 2.09-03: Corrosion protection of concrete and reinforced concrete structures of transport facilities
MDS 12-23.2006: Temporary recommendations on the technology and organization of construction of multifunctional high-rise buildings and building complexes in Moscow
MDS 12-5.2000: Gosgortekhnadzor of Russia Employee's Manual for Quality Control of Construction and Installation Work
MDS 12-61.2012: The project for the production of works on the device of a rail track of a tower crane with a concrete beam BRP-62.8.3
MGSN 2.08-01: Corrosion Protection of Concrete and Reinforced Concrete Structures for Residential and Public Buildings
MGSN 5.02-99: Design of Urban Bridge Structures
MRDS 02-08: Manual on scientific and technical support and monitoring of buildings and structures under construction, including long-span, high-altitude and unique
ODM 218.2.002-2009: Guidelines for the use of modern materials in the mating pavement with the expansion joints of bridge structures
ODM 218.2.014-2011: Guidelines for the use of steel-fiber-concrete in the repair of bridge structures
ODM 218.2.016-2011: Guidelines for the design and installation of bored piles with increased bearing capacity along the ground
ODM 218.2.017-2011: Guidelines Design, construction and operation of roads with low traffic
ODM 218.2.025-2012: Expansion joints of automobile bridges
ODM 218.2.035-2013: Recommendations for the use of fly ash in concrete foundations of roads
ODM 218.2.074-2016: Guidelines for the use of structural composite anchors for the device of transverse and longitudinal expansion joints instead of steel anchor rods in hard type coatings
ODM 218.3.012-2011: Cements for concrete coatings and road foundations
ODM 218.3.015-2011: Guidelines for the construction of cement concrete pavements in sliding forms
ODM 218.3.028-2013: Guidelines for the repair and maintenance of cement concrete pavements of roads
ODM 218.3.030-2013: Method for calculating reinforced cement concrete pavements of roads and airfields on fortified bases
ODM 218.4.003-2009: Recommendations for joining metal beams with a monolithic slab by means of continuous comb stops in steel concrete bridges
OSN-APK 2.10.32.001-04: Instructions for the use of chemical additives in concrete and mortars for rural construction
OST 32.72-97: Reinforced concrete slabs without ballast bridge bed for metal superstructures of railway bridges. General specifications
OST 35-27.0-85: Reinforced concrete links of round and rectangular culverts under the railways and roads. Design and dimensions.
P 76-2000: Handbook for the design of concrete compositions for wear-resistant facings of hydraulic structures
RD 153-34.0-21.601-98: Model Guidelines for Operation of Process Buildings and Structures of Electric Power Facilities. Part II, Sections 1, 2
RD 153-39.4-078-01: Operation Requirements for Tanks on Trunk Petroleum Product Pipelines and at Petroleum Depots
RD 31.35.13-90: Instructions for repair of hydraulic structures in maritime transport. Minmorflot, Soyuzmorniiproekt, 1990
RD EO 1.1.2.05.0696-2006: Guidelines for the construction and commissioning of the foundations of turbine units of nuclear power plants
RD EO 1.1.2.05.0697-2006: Guide to the construction and commissioning of reinforced concrete tower cooling towers of nuclear power plants
Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope
RMD 23-16-2012 Sankt-Peterburg: Recommendations for energy efficiency in residential and public buildings
RMD 31-04-2008 Sankt-Peterburg: Recommendations for construction of residential and public high-rise buildings
RMD 52-12-2012 Sankt-Peterburg: Typical temporary concrete fences during work on the city’s road network
RTM 17-01-2002: Guiding technical materials on the design and use of steel-fiber-concrete building structures
RTM 17-02-2003: Guiding technical materials on the design and manufacture of steel-fiber-concrete structures on fiber, cut from sheet
RTM 17-03-2005: Guiding technical materials on the design, manufacture and use of steel fiber concrete structures on steel wire fiber
RTM 5-05-2009: Guiding technical materials for the design, manufacture and use of steel fiber concrete structures on the fiber of thin steel wire
RTM 75-95: Process Guidelines for Factory Production of Prefabricated Prestressed Reinforced Concrete Structures -
RU 1.2.1.14.001-2012: Guidance for the repair of concrete, reinforced concrete constructions and hydrotechnical constructions of nuclear power plant stations
SA 03-004-07: Calculation of the strength of vessels and apparatus
SNiP 3.07.02-87: Hydraulic engineering marine and river transport facilities
SNiP 32-03-96: Aerodromes
SNiP 52-01-2003: Concrete and ferroconcrete structures. Principal rules
SNiP 82-02-95: Federal (standard) element cement consumption rates at manufacture of concrete and reinforced concrete products and structures
SP 102.13330.2012: Hydraulic tunnels
SP 120.13330.2012: Subway systems
SP 121.13330.2012: Aerodromes
SP 122.13330.2012: Railway and highway tunnels
SP 23-101-2000: Design of thermal performance of buildings
SP 23-101-2004: Design of thermal protection of buildings
SP 24.13330.2011: Pile foundations
SP 28.13330.2012: Corrosion protection of buildings structures. Updated living edition of SNiP 2.03.11-85
SP 32-105-2004: Subways
SP 34.13330.2012: Automobile roads. Updated living edition of SNIP 2.05.02-85
SP 34-106-98: Underground storage of gas, oil and refined products. To replace VSN 51-5-85
SP 35.13330.2011: Bridges and pipes. Updated living edition of SNiP 2.05.03-84
SP 37.13330.2012: Industrial transport
SP 40.13330.2012: Concrete and reinforced concrete dams
SP 41.13330.2012: Concrete and reinforced concrete hydraulic structures
SP 43.13330.2012: Structures for industrial installations
SP 46.13330.2012: Bridges and pipes
SP 52-104-2006: Steel fibre reineorced concrete structures
SP 52-117-2008*: Reinforced concrete spatial structures of coatings and floors. Part I. Calculation methods and design
SP 63.13330.2012: Concrete and reinforced concrete structures. General provisions.
SP 70.13330.2012: Bearing and enclosing structures. Updated living edition of SNiP 3.03.01-87
SP 78.13330.2012: Automobile roads
SP 84.13330.2016: Tramways
SP 91.13330.2012: Underground mine workings
ST RK 1409-2005: Reinforced concrete road signs supports. Specification
ST RK 1411-2005: Intracompany motor roads of agricultural enterprises and organizations. Designing requirements
ST RK 1447-2005: Pre-stressed reinforced concrete sleepers for railway with gage 1520 mm. General specification
ST RK 1684-2007: Bridgeworks and culverts on motor roads. General designing requirements
ST RK 1855-2008: Bridgeworks and culverts on motor roads. Concrete drive piles for bridge piers. General specification
ST RK 1857-2008: Motor roads. Requirements at designing of supporting walls
ST RK 1858-2008: Bridgeworks and culverts on motor roads. Requirements at designing of concrete and reinforced concrete structures
ST RK 1859-2008: Bridgeworks and culverts on motor roads. Requirements for bridges washout protection on mountain rivers and sub-mountain rivers
STB 1081-97: Ferro-concrete sleepers, prestressed for 1520 mm gauge railways. Technical conditions
STB 1520-2008: Materials for the horizontal marking of roads. Technical conditions
ST-NP SRO SSK-03-2013: Rules for monitoring and assessing the strength of concrete in monolithic structures
STO DOKTOR BETON 68686983-001-2011: Dry building mixtures trade mark "ДОКТОР БЕТОН®" for waterproofing and repair concrete construction. Classification. Nomenclature of indicators. Technical requirements
TR 103-00: Guide to Good Practice for Constriction of Roads Using Asphalt Concrete
TR 134-03: Technical recommendations for the installation and commissioning of pavements, taking into account the requirements of international standards for evenness
TR 138-03: Technical recommendations on the use of rolled low cement concrete in pavement structures
TR 141-03: Technical recommendations on the construction technology of collector tunnels without secondary lining
TR 165-05: Technical recommendations on the establishment of durability (service life) of building materials and products
TR 166-04: Technical recommendations for quality assurance of concrete and mortar mixes and prevention of concrete corrosion in reinforced concrete structures
TR 172-05: Technical recommendations for the construction of urban roads with curved side stones
TR 182-08: Technical recommendations on scientific and technical support and monitoring of the construction of long-span, high-altitude and other unique buildings and structures
TR 192-08: Technical recommendations on the construction of foundations for intra-quarter roads, incl. under adverse hydrogeological conditions, the presence of underground utilities, trenches, pits
TR 210-09: Technical recommendations (manual) on the construction technology of underground collector tunnels of rectangular section with the use of tunnel boring complexes with all-section lining
TR 50-180-06: Technical recommendations for the design and installation of pile foundations using discharge-pulse technology for high-rise buildings
TSN 12-310-97 SO: Underground facilities
TSN 20-303-2006: Protection of building structures, buildings and structures from aggressive chemical and biological environmental influences. St. Petersburg
TSN 31-332-2006: Residential and public high-rise buildings
TSN 52-302-2003: Corrosion Protection of Concrete and Reinforced Concrete Structures of Transport Facilities
TU 102-264-81: Weighted reinforced concrete modular ring. UTK type for main pipelines
TU 102-300-81: Weights prefabricated reinforced concrete covering type UBO
TU 102-421-86: Concrete wading weights type 1 UBKM
TU 102-461-88: Garage reinforced concrete prefabricated box single and double row collective use
TU 102-465-88: Rack reinforced concrete vibrated CB 90-3.2 for supports VL 6 - 10 kV
TU 102-541-89: Garage assembly individual use of ash and slag concrete
TU 102-737-95: Concrete marsh weighting compounds wedge-shaped for pipes with a diameter of 426, 325, 219 (ZUBKm)
TU 102-738-95: Weighted reinforced concrete marsh wedge with a diameter of 530, 426, 525 with low steel reinforcement consumption (1 UBKm, 2 UBKm)
TU 102-84.3-87: Garage reinforced concrete prefabricated box with two floors for collective use
TU 218 RSFSR 620-90: Hard concrete mixes for the construction of cement concrete pavements and foundations of roads and airfields
TU 34-12-11410-89: Racks of reinforced concrete CB95-1, CB95-1-a, CB95-2, CB95-2-a
TU 5741-004-18576628-99: Stones concrete wall
TU 5745-001-01386160-001: Dispersed concrete mixes-reinforced with steel fiber milled from slab
TU 5831-001-54735376-2004: Specifications. Three-layer reinforced concrete panels with flexible fiberglass connections for exterior walls of Styrod system buildings
TU 5851-008-01388383-2002: Reinforced concrete beams with frame fittings for the superstructure of road bridges and overpasses with a length of 12, 15 and 18 m. Specifications
TU 5853-001-04000633-2006: Adjustable tip manholes. Technical conditions
TU 5859-002-59565714-2012: Concrete protective flexible universal slabs
TU 67-1003-88: Lattice arched beams prestressed with a span of 12 m
VNP 001-01: Industry-Specific Design Standards. Buildings for Territorial Main Administrations, National Banks, and Clearing Centers of the Russian Federation Central Bank
VSN 14-95: Guidelines for the Construction of Asphalt Concrete Road Pavements
VSN 16-95: Industry-Specific Building Code. Guidelines on the Use of Rolled Lean-Mix Concrete in Road Pavements
VSN 210-91: Design, construction and operation of anti-landing structures and devices
VSN 26-90: Design guidelines for engineering and construction of highway roads for oil and gas fields in West Siberia
VSN 46-96: Instruction on preparation and use of concrete with sodium nitrite additive in winter conditions
VSN 56-97: Design and Basic Principles for Technology for Production of Fiber Reinforced Concrete Structures
VSP 02.01.32/Russian Defense Ministry: Rules for the production and acceptance of work in the construction of aerodromes of the Armed Forces of the Russian Federation
VSP 103-97: Steel Fiber Reinforced Concrete Enclosures for Secure Spaces in Russian Federation Central Bank Facilities. Execution, Quality Control, and Acceptance Requirements
VSP 32-02-03 MO RF: Rules for the production and acceptance of work in the repair of rigid airfield pavements
VSP 32-03-04 MO RF: Instructions for the design of drainage and drainage systems on the airfields of airfields
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.