SNiP 52-01-2003
СНиП 52-01-2003
|
|
Concrete and ferroconcrete structures. Principal rules
Бетонные и железобетонные конструкции
Status: Not effective. The updated version of SP 63.13330.2012 is in force. Concrete and reinforced concrete structures. Key Points
The rules and regulations apply to all types of concrete and reinforced concrete structures used in industrial, civil, transport, hydraulic and other areas of construction, made of all types of concrete and reinforcement and subjected to any kinds of effects.
Нормы и правила распространяются на все типы бетонных и железобетонных конструкций, применяемых в промышленном, гражданском, транспортном, гидротехническом и других областях строительства, изготавливаемых из всех видов бетона и арматуры и подвергаемых любым видам воздействий
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstroy of Russia,
6/30/2003
SKU: RUSS17531
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
5. Regulatory documents for building structures and products »
k.52 Reinforced concrete and concrete structures »
Welding regulations »
Welding work »
Welding regulations »
Main materials »
Welding regulations »
Metal structures »
Welding regulations »
Welding materials »
Welding regulations »
Documentation »
Welding regulations »
Mechanical Testing »
Welding regulations »
Defects »
Welding regulations »
Welding work »
Dusting »
Welding regulations »
Main materials »
Steel, cast iron »
Welding regulations »
Welding materials »
Gases »
Technical Supervision »
Section I. Technological, construction, energy supervision and environmental protection regarding limitation of negative anthropogenic impact »
IV. Regulatory legal acts and regulations »
4. Security of capital construction objects »
4.1. Federal State Construction Supervision »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.080 Structures of buildings »
91.080.40 Concrete structures »
The Document References:
GOST 10060.0-95: Methods for the determination of frost-resistance. General requirements
GOST 10180-90: Concretes. Methods for strength determination using reference specimens
GOST 10181-2000: Concrete Mixtures Test method
GOST 10884-94: Thermomechanically hardened steel bars for reinforced concrete constructions. Specifications
GOST 10922-90: Welded reinforcing products and inserts, welded joints of reinforcement and inserts for reinforced concrete structures. General specifications
GOST 12730.0-78: Concretes. General requirements for methods of determination of density, moisture content, water absorptions porosity and watertightness
GOST 12730.1-78: Concretes. Methods of determination of density
GOST 12730.5-84: Concretes. Methods for determination of water tightness
GOST 13015.0-83: Prefabricated concrete and reinforced concrete constructions and products. General technical requirements
GOST 13015.1-81: Prefabricated concrete and reinforced concrete constructions and products. Acceptance
GOST 14098-91: Welded joints of reinforcement and inserts for reinforced concrete structures. Types, constructions and dimensions
GOST 17624-87: Concrete. Ultrasonic method of strength determination
GOST 17625-83: Reinforced concrete structures and units. Radioactive method of determination of concrete protective covering thickness, reinforcement dimensions and arrangement
GOST 18105-86: Concretes. Rules for the strength control
GOST 20910-90: Refractory concretes. Specifications
GOST 22690-88: Concretes. Determination of strength by mechanical methods of nondestructive testing
GOST 22904-93: Reinforced concrete structures. Magnetic method for determining the thickness of the protective layer of concrete and the location of reinforcement
GOST 23478-79: Form for monolithic concrete and reinforced concrete structures erection. Classification and general technical requirements
GOST 23732-79: Water for concretes and mortars. Specifications
GOST 23858-79: Welded joints butt and T-formed of reinforcement steel bars. Ultrasonic methods of quality inspection. Acceptability requirements
GOST 24211-2003: Additives for concretes and mortars. General specifications
GOST 24211-91: Concrete additives. General technical requirements
GOST 25192-82: Concretes. Classification and general technical requirements
GOST 25214-82: Dense silicate concrete. Technical requirements
GOST 25246-82: Chemically resistant concretes. Specifications
GOST 25485-89: Cellular concretes. Specifications
GOST 25781-83: Steel moulds for reinforced concrete members. Specifications
GOST 25820-2000: Lightweight aggregates concretes. Specifications
GOST 25820-83: Lightweight concrete. Specifications
GOST 26633-91: Heavy-weight and sand concretes. Specifications
GOST 27005-86: Light-weight and cellular concretes. Rules of average density control
GOST 27006-86: Concretes. Rules for mix proportioning
GOST 27751-88: Reliability of the constructions and the foundations. Principal rules of the calculations
GOST 28570-90: Concretes. Methods of strength evaluation on cores drilled from structures
GOST 30515-97: Cements General specifications
GOST 4.212-80: Product-quality index system. Building. Concretes. Nomenclature of indices
GOST 4.250-79: Construction. Concrete and reinforced concrete products and structures
GOST 5781-82: Hot-rolled steel for reinforcement of ferroconcrete structures. Specifications
GOST 6727-80: Cold-drawn low-carbon steel wire for reinforced concrete. Specifications
GOST 7473-94: Ready-mixed concrete. Specifications
GOST 8267-93: Crushed stone and gravel of solid rocks for construction works. Specifications
GOST 8736-93: Sand for construction works. Specifications
GOST 8829-94: Reinforced concrete and prefabricated concrete building products. Loading test methods. Assesment of strength, rigidity and crack resistance
GOST R 51263-99: Concrete with polysterene aggregates. Specifications
SNiP 12-01-2004: Organization of construction
SNiP 2.03.11-85: Corrosion protection of buildings structures
SNiP 2.06.06-85: Concrete and reinforced concrete dams
SNiP 23-02-2003: Buildings Heat Insulation
SNiP 3.03.01-87: Bearing and enclosing structures
SNiP 32-04-97: Railway and highway tunnels
SNiP 33-01-2003: Hydraulic engineering constructions. Basic principles of designing
The Document is Referenced By:
GOST 12504-2015: Concrete and reinforced concrete panels for internal walls of residential and civil buildings. General specifications
GOST 19330-2013: Masts (poles) for overhead contact line supports of railways. Specifications
GOST 26633-91: Heavy-weight and sand concretes. Specifications
GOST 31384-2008: Structural concrete protection against corrosion. General requirements
GOST 31937-2011: Buildings and constructions. Rules of inspection and of the technical condition
GOST 32942-2022: Prestressed reinforced concrete beams for switches. General specifications
GOST 33329-2015: Acoustical barriers for railway transport. Technical requirements
GOST 6482-2011: Ferroconcrete nonpressure pipes. Technical specifications.
GOST R 52751-2007: Steel-fibro-concrete slabs for bridge spans. Specifications
GOST R 53778-2010: Buildings and constructions. Rules of inspection and monitoring of the technical condition. General requirements
GOST R 54523-2011: Port hydraulic structures. Rules of inspection and monitoring of the technical condition
GOST R 54931-2012: Acoustical barriers for railway transport. Technical requirements
GOST R 55567-2013: The order of the organization and conducting technical engineering studies on researches on objects of cultural heritage. Monuments of history and culture. General requirements
GOST R 56400-2015: Petroleum and natural gas industries. Design and operation of offshore terminals of liquefied natural gas. General requirements
GOST R 58341.12-2022: Structures of Buildings and Structures of Nuclear Power Plants. Accounting of actually worked out and estimation of residual resource
GOST R 70344-2022: Translucent enclosing structures. Works on the construction of skylights. General requirements for the manufacture and control of works
GOST R 70447-2022: Reinforced Concrete Structures with Looped Joints of Reinforcement for Nuclear Power Facilities. Design and calculation requirements
GOST R 70521-2022: Reinforced Concrete Products for Silos of Elevators and Grain Processing Enterprises. General technical conditions
Manual: Manual for impulse and low consumption fire extinguishing systems
Manual for MGSN 2.07-01: Inspection and monitoring during the construction and reconstruction of buildings and underground structures
Manual for SP 52-117-2008*: Manual for the design of reinforced concrete spatial structures of coatings and floors
Manual for SP 63.13330.2012: Manual for the calculation of concrete and reinforced concrete structures on a computer
MDK 2-04.2004: Methodological manual for the maintenance and repair of housing
MDS 12-23.2006: Temporary recommendations on the technology and organization of construction of multifunctional high-rise buildings and building complexes in Moscow
MDS 13-24.2010: Recommendations on the rules of geotechnical support of high-rise construction and adjacent space
MDS 20-2.2008: Temporary recommendations for the safety of large-span structures from avalanche-like (progressive) collapse under accidental effects
MDS 50-1.2007: Design and construction of foundations, foundations and underground parts of multifunctional high-rise buildings and building complexes
MGSN 4.19-2005: Temporary norms and standards for design of multifunctional high-rise buildings and buildings complexes in Moscow. Part 2. (Part 1 is sold separately as MGSN 4.19-05)
MRDS 02-08: Manual on scientific and technical support and monitoring of buildings and structures under construction, including long-span, high-altitude and unique
MRR 3.2.69.02-12: The collection of basic prices for design work for the construction of the metro in the city of Moscow, carried out with the involvement of the budget of the city of Moscow
MRR 3.2.69-09: Collection of basic prices for design work for the construction of the metro in the city of Moscow
ODM 218.2.002-2008: Recommendations for the design and installation of polymer bridge bearing parts
ODM 218.2.014-2011: Guidelines for the use of steel-fiber-concrete in the repair of bridge structures
ODM 218.2.026-2012: Design and calculation guidelines for pile-anchor structures of highways
ODM 218.2.035-2013: Recommendations for the use of fly ash in concrete foundations of roads
ODM 218.2.074-2016: Guidelines for the use of structural composite anchors for the device of transverse and longitudinal expansion joints instead of steel anchor rods in hard type coatings
ODM 218.2.075-2016: Guidelines for the use of structural composite grids and gratings instead of steel when used to strengthen the arches of tunnels and retaining walls by the method of gunning
ODM 218.3.008-2011: Recommendations for monitoring and inspection of retaining walls and retaining structures on landslide roads
ODM 218.3.012-2011: Cements for concrete coatings and road foundations
Order 1112: On Amending Order No. 687 of the Federal Agency for Technical Regulation and Metrology of April 2, 2020
Order 1653: On amending the order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687
Order 2079: List of documents in the field of standardization, the application of which on a voluntary basis to ensure compliance with the requirements of the Federal Law of December 30, 2009 № 384-FZ "Technical Regulations on the Safety of Buildings and Structures
RD 03-380-00: Guidelines for Inspection of Spherical Tanks and Gas Holders for Storage of Liquefied Gases Under Pressure
RD 03-410-01: Instructions on the procedure of comprehensive engineering certification of cryogenic tanks for liquefied gases
RD 03-420-01: Guidelines for Inspection of Reinforced Concrete Tanks for Petroleum and Petroleum Products
RD 10-117-95: Requirements for Installation and Safe Operation of Rail Tracks of Gantry Cranes
RD 10-138-97: Thorough Inspection of Rail Crane Tracks of Hoisting Machinery. Part 1: General Provisions. Procedural Guidelines
RD EO 1.1.2.05.0696-2006: Guidelines for the construction and commissioning of the foundations of turbine units of nuclear power plants
Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope
RMD 31-04-2008 Sankt-Peterburg: Recommendations for construction of residential and public high-rise buildings
RMD 52-01-2006 Sankt-Peterburg: Design and construction of enclosing structures of residential and public buildings using cellular concrete in St. Petersburg. Part I
RMD 52-02-2007 Sankt-Peterburg: Design and construction of enclosing structures of residential and public buildings using cellular concrete in St. Petersburg. Part II
RTM 17-01-2002: Guiding technical materials on the design and use of steel-fiber-concrete building structures
RTM 17-02-2003: Guiding technical materials on the design and manufacture of steel-fiber-concrete structures on fiber, cut from sheet
RTM 17-03-2005: Guiding technical materials on the design, manufacture and use of steel fiber concrete structures on steel wire fiber
RTM 5-05-2009: Guiding technical materials for the design, manufacture and use of steel fiber concrete structures on the fiber of thin steel wire
SDOS-04-2009: Construction control. Methodology for conducting construction control during construction, reconstruction, overhaul of capital construction facilities
SP 102.13330.2012: Hydraulic tunnels
SP 120.13330.2012: Subway systems
SP 14.13330.2011: Construction in seismic regions.
SP 22.13330.2011: Buildings and structures foundations
SP 27.13330.2011: Concrete and Reinforced Concrete Structures intended for the Service in Elevated and High Temperatures
SP 31-114-2004: Rules for the design of residential and public buildings for the construction in seismic areas
SP 32-105-2004: Subways
SP 50-101-2004: Design and construction of soil bases and foundations for buildings and structures
SP 50-102-2003: Design and construction of soil bases and foundations for buildings and structures
SP 52-101-2003: Concrete and reinforced concrete structures without prestressing
SP 52-102-2004: Pre-stressed concrete structures
SP 52-103-2007: Reinforced concrete monolithic building structures
SP 52-104-2006: Steel fibre reineorced concrete structures
SP 52-105-2009: Reinforced concrete structures in cold climates and on permafrost soils. (In the development of SNiP 52-01-2003 and SNiP 2.02.04-88)
SP 52-110-2009: Concrete and reinforced concrete structures subjected to technological high and high temperatures
SP 52-117-2008*: Reinforced concrete spatial structures of coatings and floors. Part I. Calculation methods and design
SP 66.13330.2011: Designing, building of pressure head networks of water supply and water removal with application of high-strength pipes from pigiron with spherical graphite
SP 91.13330.2012: Underground mine workings
SP 98.13330.2012: Tram and trolleybus lines
STO DOKTOR BETON 68686983-003-2011: Dry building mixtures trade mark "ДОКТОР БЕТОН®" for waterproofing and repair concrete construction. Technologies execution and methods estimation of quality
TR 172-05: Technical recommendations for the construction of urban roads with curved side stones
TR 182-08: Technical recommendations on scientific and technical support and monitoring of the construction of long-span, high-altitude and other unique buildings and structures
TR 192-08: Technical recommendations on the construction of foundations for intra-quarter roads, incl. under adverse hydrogeological conditions, the presence of underground utilities, trenches, pits
TR 206-09: Technical recommendations on the design and production of works on the installation of walling pits in the cramped conditions of the existing urban development in Moscow
TR 50-180-06: Technical recommendations for the design and installation of pile foundations using discharge-pulse technology for high-rise buildings
TSN 20-303-2006: Protection of building structures, buildings and structures from aggressive chemical and biological environmental influences. St. Petersburg
TSN 31-332-2006: Residential and public high-rise buildings
TSN 50-302-2004: Designing the foundations of buildings and structures in St. Petersburg
TSN 50-306-2005: Foundations and foundations of increased bearing capacity. Rostov region
Customers Who Viewed This Item Also Viewed:
|
Building materials. Methods for combustibility test
Language: English |
Building materials spread flame test method
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Clear sheet glass. Specifications
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.