GOST 11214-2003
ГОСТ 11214-2003
|
|
Windows of wood with glass. Specifications
Блоки оконные деревянные с листовым остеклением. Технические условия
Status: Effective
This standard applies to wooden window and balcony door frames with sheet glazing for buildings and structures for various purposes. The scope of specific types of products is set depending on the operating conditions in accordance with the applicable building codes, taking into account the requirements of GOST 23166 and this standard. The standard does not apply to products for special purposes in terms of additional requirements for fire safety, protection against hacking, etc.
Настоящий стандарт распространяется на деревянные оконные и балконные дверные блоки с листовым остеклением для зданий и сооружений различного назначения. Область применения конкретных типов изделий устанавливают в зависимости от условий эксплуатации в соответствии с действующими строительными нормами с учетом требований ГОСТ 23166 и настоящего стандарта. Стандарт не распространяется на изделия специального назначения в части дополнительных требований к пожаробезопасности, защиты от взлома и др
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstroy of Russia,
6/20/2003
SKU: RUSS17532
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
5. Regulatory documents for building structures and products »
k.56 Windows, doors, gates and their appliances »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.060 Construction elements »
91.060.50 Doors and windows »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.060 Construction elements »
91.060.50 Doors and windows »
National Standards for KGS (State Standards Classification) »
Latest edition »
Zh Construction and building materials »
Zh3 Building structures and parts »
Zh32 Wooden structures and parts »
As a Replacement Of:
GOST 11214-86: Wooden windows and balcony doors for dwellings and public buildings
GOST 16289-86: Wooden windows and balcony doors of triple glazing for dwelling and public buildings. Types, construction and dimensions
The Document References:
GOST 1.0-92: State System for Standardization of Russian Federation. Basic principles
GOST 111-2001: Flat glass. Specifications
GOST 111-90: Polished glass. Specifications
GOST 11214-86: Wooden windows and balcony doors for dwellings and public buildings
GOST 15140-78: Paintwork materials. Methods for determination of adhesion
GOST 15612-85: Products of wood and wooden materials. Methods for determining surface roughness parameters
GOST 15613.1-84: Glued massive wood. Methods for determination of glued joint of ultimate strength while shearing palong grain
GOST 15613.4-78: Glued massive wood. Methods for determining the ultimate strength of serrate glued joints in static bending
GOST 16289-86: Wooden windows and balcony doors of triple glazing for dwelling and public buildings. Types, construction and dimensions
GOST 16588-91: Sawn products and wooden details. Methods for determining moisture content
GOST 166-89: Vernier callipers. Specifications
GOST 17005-82: Wooden laminated structures. Methods to determinate water-stability of adhesive joints
GOST 2140-81: Visible defects, of wood. Classification, terms and definitions, methods of measurement
GOST 22233-2001: Aluminium alloy extruded sections for translucent envelopes. General specifications
GOST 23166-99: Windows. General specifications
GOST 24033-80: Windows and balcony doors of wood. Methods of mechanical tests
GOST 24404-80: Product of woods and wooden materials. Coatings of lacquers and paints. Classification and designations
GOST 24700-99: Windows of wood with glassing units. Specifications
GOST 26433.0-85: System of ensuring geometrical parameters accuracy in construction. Rules of measurement. General
GOST 26433.1-89: System of ensuring geometrical parameters accuracy in construction. Rules of measurement. Prefabricated elements
GOST 26602.1-99: Windows and doors. Methods of determination of resistance of thermal transmission
GOST 26602.2-99: Windows and doors. Methods of determination of air and water transmission
GOST 26602.3-99: Windows and doors. Method of measurement of sound insulation
GOST 26602.4-99: Windows and doors. Method of determination of total light transmittance
GOST 26602.5-2001: Windows and doors. Methods of determination of resistance to wind load
GOST 2695-83: Sawn timber of leaf-bearing species
GOST 3069-80: Two lay rope type ЛК-О construction 6x7 (1+6)+1 o.с. Dimensions
GOST 30698-2000: Glass tempered for building. Specifications
GOST 30733-2000: Hard coat low emissivity glass. Specifications
GOST 30778-2001: Rubber compression-types for windows and doors. Specifications
GOST 30971-2002: Erection to joints of window assemblies adjoined to wall openings. General specifications
GOST 30972-2002: Glue wood billets and details for windows and doors. Specifications
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 538-2001: Locks and building hardware. General specifications
GOST 538-88: Lock and building hardware
GOST 7.67-94: System of standards on information librarianship and publishing. Codes of names of countries
GOST 7016-82: Products of wood and wooden materials. Parameters of surface roughness
GOST 7502-98: Measuring metal tapes. Specifications
GOST 7897-83: Blanks of hardwood timber
GOST 8486-86: Coniferous sawn timber. Specifications
GOST 9.031-74: Unified system of corrosion and ageing protection. Anode-oxide coatings for semifinished products made out of aluminium and alloys. General requirements and methods of control
GOST 9.301-86: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. General requirements
GOST 9416-83: Building levels. Technical requirements
GOST 9685-61: Coniferous timber blanks
The Document is Referenced By:
GOST 11024-2012: Concrete and reinforced concrete panels for external walls of residential and civil buildings. General specifications
GOST 11024-84: Concrete and reinforced concrete panels for external walls of residential and civil buildings. General specifications
GOST 11118-2009: Autoclaved aerated concrete panels for external walls of buildings. Specifications
GOST 18128-2018: Timber framed asbestos cement exterior wall panels supplied with insulation. Specifications
GOST 18128-82: Timber framed asbestos cement exterior wall panels supplied with insulation. Specifications
GOST 24594-81: Wall panels and blocks of brick and ceramic stones. General specifications
GOST 31310-2005: Wall three-layer reinforced concrete panels with energy-efficient insulation. General specifications
GOST 31310-2015: Wall three-layer reinforced concrete panels with energy-efficient insulation. General specifications
GOST 34914-2022: Windows for industrial buildings. General technical conditions
GOST R 58700-2019: Wooden windows and balcony doors for low-rise residential buildings. Types, Design and Dimensions
Letter 20-02-6/9299-SL: On the development and application of indices of changes in the estimated cost of construction to the territorial and federal estimated standards at the level of the constituent entities of the Russian Federation
Manual for MR 23-345-2008: Standards of the energy passport and the section "Energy Efficiency" for residential, public and mixed buildings (manual to MP 23-345-2008)
RD 34.09.210: Procedural Guidelines for Standardization of Heat Consumption for Heating and Ventilating of Process Buildings of Thermal Power Stations
Resolution 2425: On approval of the single list of products subject to mandatory certification and the single list of products subject to declaration of conformity, amending the decree of the Government of the Russian Federation of December 31, 2020 N 2467 and repealing certain acts of the Government of the Russian Federation
SP 23-104-2004: Assessment of the noise in the design, construction and operation of subway
SP 338.1325800.2018: High-speed railways noise protection. Design and construction regulations
SP 353.1325800.2017: Noise protection of metro units. Regulations for designing, construction and operation
SP 507.1325800.2021: Buildings and premises of weapons, ammunition and special means for the needs of the penal system. Design Rules
TSN JeO 98: Territorial building codes for energy supply of new and reconstructed buildings and structures using autonomous and centralized heat supply systems. Moscow region
|
Customers Who Viewed This Item Also Viewed:
 |
Square steel tubes. Range
Language: English |
Design norms for antiseismic atomic power stations
Language: English |
Federal norms and rules in the field of the use of atomic energy. Valves for nuclear power plants. General technical requirements
Language: English |
Electric locomotives. General technical requirements
Language: English |
Pipeline valves. Leakage rates of valves
Language: English |
Federal Standards and Rules in the Field of Atomic Energy Use
Language: English |
Locomotive and motor rolling stock. Requirements of fire safety
Language: English |
Railway rolling stock. Methods for monitoring the performance of fire alarm and fire extinguishing systems
Language: English |
Oil. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
