GOST 12.3.005-75
ГОСТ 12.3.005-75
|
|
Painting works
Система стандартов безопасности труда. Работы окрасочные. Общие требования безопасности
Status: Effective - Introduced for the first time
The standard applies to painting work carried out with the use of paints and varnishes according to GOST 9825 and establishes general safety requirements for the preparation and execution of these works. The standard does not apply to painting work in the construction and repair of buildings and structures.
Стандарт распространяется на окрасочные работы, осуществляемые с применением лакокрасочных материалов по ГОСТ 9825 и устанавливает общие требования безопасности при подготовке и выполнении этих работ. Стандарт не распространяется на окрасочные работы при строительстве и ремонте зданий и сооружений.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstandart of the USSR,
8/19/1975
SKU: RUSS17561
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
13 Environmental protection, protection of people from environmental exposure. Security »
Construction (Max) »
Standards »
Other state standards used in construction »
87 Paint and varnish industry »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
III Occupational safety requirements for production equipment and processes »
2 Safety requirements for certain types of work »
2.3 Safety requirements of production processes »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
III Occupational safety requirements for production equipment and processes »
1 General occupational safety requirements »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.100 Safety of professional activity. Industrial hygiene »
National standards »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.100 Safety of professional activity. Industrial hygiene »
ISO classifier »
87 PAINT AND VARNISHING INDUSTRY »
87.020 Paint manufacturing processes »
National standards »
87 PAINT AND VARNISHING INDUSTRY »
87.020 Paint manufacturing processes »
National Standards for KGS (State Standards Classification) »
Latest edition »
T General technical and organizational and methodological standards »
T5 Documentation System »
T58 System of standards infield of nature conservation and improvement of use of natural resources, labor safety, scientific organization of labor »
National Standards for OKSTU »
SYSTEMS OF GENERAL TECHNICAL AND ORGANIZATIONAL-METHODOLOGICAL STANDARDS »
Occupational safety standards system (SSBT). Scientific organization of labor. Safety precautions. Sanitation and occupational health »
The Document References:
GOST 12.0.004-90: Organization of training for labor safety. General rules
GOST 12.1.001-89: Occupational safety standards system. Ultrasound. General safety requirements
GOST 12.1.003-83: Noise. General safety requirements
GOST 12.1.004-91: Fire safety. General requirements
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.1.007-76: Noxious substances. Classification and general safety requirements
GOST 12.1.010-76: Explosion safety. General requirements
GOST 12.1.012-2004: Occupational safety stаndards system. Vibration safety. General requirements
GOST 12.1.012-90: SSBT. Occupational Safety Standards System. Vibrational safety. General requirements
GOST 12.1.018-93: Fire and explosion safety of static electricity. General requirements.
GOST 12.1.019-79: Occupational safety standards system. Electric safety. General requirements and nomenclature of kinds of protection
GOST 12.1.045-84: Occupational safety standards system. Electrostatic fields. Tolerance levels and methods of control at working places
GOST 12.2.003-91: Industrial equipment. General safety requirements
GOST 12.2.032-78: Operators location in a silting position. General ergonomic requirements
GOST 12.2.033-78: Operators location in a standing position General ergonomic requirements
GOST 12.3.002-75: Occupational safety standards system. Manufacturing processes. General safety requirements
GOST 12.3.020-80: Occupational safety standards system. Transporting process of loads in all fields of national economy. General requirements safety
GOST 12.4.009-83: Fire-fighting equipment for protection of units. Basic types. Location and maintenance
GOST 12.4.021-75: Ventilation systems. General requirements
GOST 12.4.026-76: Signal colors and safety signs
GOST 1510-84: Petroleum and petroleum products. Marking, packing, transportation and storage
GOST 17.2.3.02-78: Regulations for establishing permissible emissions of noxious pollutants from industrial enterprises
GOST 21889-76: Man-machine system. Operator's arm-chair. General ergonomic requirements
GOST 3134-78: White spirit
GOST 9.402-2004: Unified system of corrosion and ageing protection. Paint coatings. Metal surface preparation for painting
GOST 9736-91: Electric apparatus of direct transformation for measuring non -electric values. General technical requirements and test methods
GOST 9825-73: Paint materials. Terms, definitions and designations
GOST 9980.5-86: Paint materials. Transportation and storage
GOST R 12.4.026-2001: Occupational safety standards system. Safety colors, safety signs and signal marking. Purpose and rules of application. General technical requirements and characteristics. Test methods
The Document is Referenced By:
GOST 1003-73: Liquid naphthenic driers. Specifications
GOST 10144-74: Enamels ХV-124 and ХV-125. Specification
GOST 10144-89: Enamels XB-124Specifications
GOST 10277-90: Putties. Specifications
GOST 10503-71: Oil paints, ready for use. Specifications
GOST 10760-76: Electrical insulating varnish ВЛ-941. Specifications
GOST 10772-78: Antipenetration water-based washes
GOST 10982-75: Write enamel ЭП-148 for refrigerators and other electrodomestic devices. Specifications
GOST 11004-84: Principal ventilation mine blowers
GOST 12.3.027-2004: Foundry work. Safety requirements
GOST 12.3.027-81: Occupational safety standards system. Foundry work. Safety requirements
GOST 12.3.042-88: Occupational safety standards system. Woodworking manufacture. General safety requirements
GOST 12294-66: Electrical insulating impregnation varnish ФЛ-98. Specifications
GOST 12549-2003: Passenger cars of 1520 mm gauge main-line railways. Painting. Specifications
GOST 12549-80: Passenger cars of mainline railways track 1520(1524) mm gauge. Painting. Technical requirements
GOST 12707-77: Wash primers. Specifications
GOST 12708-77: Solvent PФГ for wash primers. Specifications
GOST 13354-91: Gated wooden patterns. Specifications
GOST 1347-77: Varnish БТ-783. Specifications
GOST 14147-80: Varnish ФЛ-559. Specifications
GOST 14923-78: Enamels ПФ-223. Specifications
GOST 15030-78: Varnish KФ-965. Specifications
GOST 15865-70: Insulating varnish MЛ-92. Specifications
GOST 15907-70: Varnishes ПФ-170 and ПФ-171. Specifications
GOST 15943-80: Electrical insulating enamel ЭП-91. Specifications
GOST 16302-79: Primer ФЛ-086. Specifications
GOST 16508-70: Insulating silicon varnishes. Specifications
GOST 18099-78: Enamels ML-152. Specifications
GOST 18187-72: Solvents of РЭ type for electrocoating. Specifications
GOST 18188-72: Solvents of grades 645, 646, 647, 648 for paint materials. Specifications
GOST 18335-83: Enamel НЦ-184. Specifications
GOST 18374-79: Enamels XB-110 and XB-113. Specifications
GOST 18620-86: Electrotechnical articles
GOST 19024-79: Enamels AC-182. Specifications
GOST 190-78: Drying oil
GOST 19214-80: Water dispersion paints for interior works. Specifications
GOST 20223-74: Spray guns for pneumatic spraying. General specifications
GOST 20481-80: Enamels MЛ-1110. Specifications
GOST 20824-81: Varnish ЭП-730. Specifications
GOST 20833-75: Water-dispersion paints for exterior works. Specifications
GOST 21227-93: Enamels ПФ-218. Specifications
GOST 21824-76: Enamels Xc-119 And Xc-119e Specifications
GOST 22133-86: Paint and varnish coatings of metal-cutting, press-forging, foundry and wood-working equipment
GOST 22369-77: Enamels ЭП-567. Specifications
GOST 22438-85: Enamels ЭП-525. Specifications
GOST 22564-77: Enamels KO-84 and KO-859. Specifications
GOST 22896-77: Paint coatings for electric locomotives of 1520 mm gauge main line railways. Specifications
GOST 22947-78: Paint coatings for diesel locomotives of 1520 mm gauge main line railways. Specifications
GOST 23122-78: Enamels KO-811 and KO-811K. Specifications
GOST 23123-78: Silvery enamel KO-83. Specifications
GOST 23143-78: Enamels ЭП-773. Specifications
GOST 23143-83: Enamels ЭП-773. Specifications
GOST 23171-78: Enamel AK-512. Specifications
GOST 23343-78: Primer ГФ-0119. Specifications
GOST 23438-79: Varnishes of type ПЭ-232, ПЭ-250, ПЭ-250М, ПЭ-250ПМ. Specifications
GOST 23494-79: Primer XC-059, enamels XC-759, varnish XC-724. Specifications
GOST 23599-79: Enamels type ЭП-255 and ЭП-275. Specifications
GOST 23626-79: Emali HV-714. Tehnicheskie usloviya
GOST 23760-79: Enamels MЧ-145. Specifications
GOST 23832-79: Varnishes AK-113 and AK-113Ф. Specifications
GOST 23846-79: Refrigerator cores for main railways of 1520 (1524) mm gauge. Paint coatings. Specifications
GOST 24466-80: System of agricultural equipment maintenance and repairing. Machines and equipment for husbandry and animal food production. Maintenance regulations
GOST 24595-81: Primer B-MЛ-0143. Specifications
GOST 24709-2022: Enamels EP-140. Specifications
GOST 24709-81: Enamels ЭП-140. Specifications
GOST 24784-81: Enamels ПФ-188. Specifications
GOST 25129-82: Primer GF-031. Specifications
GOST 25515-82: Enamels НЦ-256. Specifications
GOST 25718-83: Primers AK-069 and AK-070. Specifications
GOST 25812-83: Steel pipe mains. General requirements for corrosion protection
GOST 26093-84: Ceramic insulators. Test methods
GOST 26182-84: Non-destructive testing. Fluorescent method of leak testing
GOST 26501-85: Marine ship hulls. General requirements for electrochemical protection
GOST 28196-89: Water-dispersion paints
GOST 28302-89: Thermal sprayed protective coatings from zinc and aluminium metallic construction. General requirements for a typical technological process
GOST 28379-89: Putties ЭП-0010 and ЭП-0020. Specifications
GOST 28426-90: Thermo diffusion strengthening and protection of metal products. General requirements for technological process
GOST 28613-90: Paint coatings of bicycles, motor cycles, scooters, motor bicycles. General requirements and methods of control
GOST 28970-91: Polymer protective coatings for insulation, localization, deactivation, improving, radioactivity situation in radiation protected rooms and box-like premises. Technological requirements
GOST 30246-2016: Rolled thin-walled metal sheet with protective and decorative paintwork for building structures. Specification
GOST 30246-94: Continuously rolled sheet steel with paint coating for Building
GOST 30884-2003: Ready-mixed oil paints. General specifications
GOST 31089-2003: Household solvents (diluents) for paint coating materials. General specifications
GOST 31093-2003: Paints and varnishes for furniture. General specifications
GOST 312-79: Varnish БТ-5100. Specifications
GOST 31365-2008: Paint coatings electrolocomotives and diesellocomotives of 1520 mm gauge mainline railways. Specifications
GOST 31384-2008: Structural concrete protection against corrosion. General requirements
GOST 31384-2017: Protection of concrete and reinforced concrete structures against corrosion. General technical requirements
GOST 31445-2012: Steel and cast iron tubes and pipes with protective coatings. Technical requirements
GOST 31448-2012: Steel pipes with defensive covering for main gas and oil pipelines. Specifications
GOST 31537-2012: Wheelset assembly for locomotives and motor-powered units using shrink fit method. Typical technological process
GOST 32753-2014: General use highways. Colored Anti-skid surface. Technical requirements
GOST 32829-2014: Automobile roads of general use. Road marking materials. Methods of testing
GOST 32830-2014: Automobile roads of general use. Road marking materials. Technical requirements
GOST 32872-2014: Automobile roads of general use. Bituminous sealants. Technical requirements
GOST 33025-2014: Automobile roads of general use. Rumble strips. Technical requirements
GOST 33290-2015: Paint materials used in building. General specifications
GOST 33354-2015: Paint materials being in contact with food products. General specifications
GOST 34077-2017: Hydrodynamic transmission for the railway rolling stock. Specifications
GOST 482-77: Zink oxide oil paste. Specifications
GOST 4976-83: Furniture lacquers НЦ-218, НЦ-222, НЦ-243 and НЦ-223. Specifications
GOST 5406-84: Enamels НЦ-25. Specifications
GOST 5470-75: Lacquers of ПФ-283 and ГФ-166 types. Specifications
GOST 5631-79: Lacquer BT-577 and paint BT-177. Specifications
GOST 5971-78: Enamels for instruments. Specifications
GOST 6244-70: Electrical insulating impregnating varnishes БТ-987, БТ-988. Specifications
GOST 6465-76: Enamels PF-115. Specifications
GOST 64-77: Enamels ГФ-230 BЭ. Specifications
GOST 6586-77: Black paste (oil base) MA-015. Specifications
GOST 6631-74: Enamels НЦ-132. Specifications
GOST 6745-79: Enamel ГФ-1426. Specifications
GOST 6993-79: Enamels HV-1100. Specification
GOST 7313-75: Enamels ХВ-785 and lacquer XB-784. Specifications
GOST 7409-2009: Freight cars. Requirements to paint coatings
GOST 7409-2018: Freight cars. Requirements to paint coatings and corrosion protection and methods of their control
GOST 7409-90: Main line freight cars for 1520 mm gauge. Specifications for the development of paint coating technologies
GOST 7462-73: Enamels НЦ-5123. Specifications
GOST 7751-2009: Agriculture machinery. Regulations of storage
GOST 7827-74: Solvents of grades P-4, P-4A, P-5, P-5A, P-12 for paint materials. Specifications
GOST 7931-76: Natural drying oil
GOST 8018-70: Electrical insulating impregnating varnish ГФ-95. Specifications
GOST 8292-85: Oil and paste color paints
GOST 8832-76: Paintwork materials. Methods for formation of paint coating for testing
GOST 9.074-77: Unified corrosion and ageing protection system. Coatings for paintwork intended for use in areas with moderate climate. General technical requirements and methods of accelerated testing
GOST 9.083-78: Unified system of corrosion and ageing protection. Paint coatings. Accelerated test methods for durability in liquid corrosive mediums
GOST 9.401-2018: Unified system of corrosion and ageing protection. Paint coatings. General requirements and methods of accelerated tests on resistance to the influence of climatic factors
GOST 9.401-79: Unified system of protection against corrosion. Coatings for paintwork intended for use in areas with tropical climate. General technical requirements and methods of accelerated testing
GOST 9.401-89: Unified corrosion and ageing protection system. Coatings for paintwork intended for use in areas with tropical climate. General requirements and methods of accelerated testing
GOST 9.401-91: Unified system of corrosion and ageing protection. Paint coatings. General requirements and methods of accelerated tests on resistance to the action of climatic factors.
GOST 9.402-2004: Unified system of corrosion and ageing protection. Paint coatings. Metal surface preparation for painting
GOST 9.402-80: Metal surface preparation for painting
GOST 9.403-2022: Unified system of protection against corrosion and aging (USPCS). Paint and varnish coatings. Test methods for resistance to static action of liquids
GOST 9.403-80: Unified system of corrosion and ageing protection. Paint coatings. Test methods for resistance to liquid static effect
GOST 9.405-83: Unified system of corrosion and ageing protection. Paint coatings. Method for determination of hot drying conditions
GOST 9.406-84: Unified system of corrosion and ageing protection. Organic-silicate coatings. Technical requirements and methods of tests
GOST 9.408-86: Unified system of corrosion and ageing protection. Paint coatings. Accelerated corrosion test for resistance in storage conditions
GOST 9.410-88: Unified system of corrosion and ageing protection. Powder polymeric coatings. Typical technological processes
GOST 9.602-2005: Unified system of corrosion and ageing protection. Underground constructions. General requirements for corrosion protection
GOST 9.602-89: Constructions, underground. General requirements for corrosion protection
GOST 9078-84: Flat pallets
GOST 9109-81: Primers ФЛ-03k and ФЛ-03Ж. Specifications
GOST 9151-75: Enamels of types ГФ-92. Specifications
GOST 9198-83: Enamels of types НЦ-11 and НЦ-11А. Specifications
GOST 926-82: Enamels ПФ-133. Specifications
GOST 9355-81: Primer HS-010. Enamel HS-710. Lacquer HS-76. Specification
GOST 9570-2016: Box and pestpallets. General specifications
GOST 9570-84: Box and post pallets
GOST 9640-85: Enamels ЭП-51. Specifications
GOST 9754-76: Enamels MЛ-12 type. Specifications
GOST R 50.05.06-2018: Conformity assessment system for the use of nuclear energy. Conformity assessment in the form of examination. Unified procedures. Magnetic particles examination
GOST R 51037-97: Protective polymer coatings for insulation, localization, localization dust suppression and deactivation. General technical requirements
GOST R 51164-98: Steel pipe mains. General requirements for corrosion protection
GOST R 51691-2000: Paint materials. Enamels. General specifications
GOST R 51691-2008: Paint materials. Enamels. General specifications
GOST R 51693-2000: Anticorrosion primers. General specifications
GOST R 51759-2001: Hydrodynamic transmission for the railway rolling stock. General specifications
GOST R 52020-2003: Water dispersible paint materials. General specifications
GOST R 52146-2003: Cold rolled and cold rolled hot-galvanized sheet with polymer coating, prepainted by the continuous coil-coating process. Specifications
GOST R 52491-2005: Coating materials, used in building. General specifications
GOST R 52568-2006: Steel pipes with defensive covering for main gas and oil pipelines. Specifications
GOST R 52575-2006: General use highways. Road marking materials. Technical requirements
GOST R 53191-2008: Wheelset assembly for locomotives and motor-powered units using shrink fit method. Typical technological process
GOST R 53202-2008: Paint materials being in contact with food products. General specifications
GOST R 53370-2009: Removable protective polymeric covering for radiation protective rooms and box-like premises. Improvement of radioactivity situation. Technological requirements
GOST R 53384-2009: Steel and cast iron tubes and pipes with protective coatings. Technical requirements
GOST R 53627-2009: Fine-layered polymer coating for roadway of bridges. Specifications
GOST R 54301-2011: Cold-rolled electrolyze zinc sheet with polymer coating, repainted by the continuous coil-coating process. Specifications
GOST R 54317-2011: Launching and technical complexes of space-rocket complexes. Safety requirements
GOST R 54893-2012: Passenger cars on locomotive traction and motor-cars. Lacquer and antidischarge coating reguirements.
GOST R 56204-2014: Steam and hot-water stationary boilers. Steel structures. General operating specification
GOST R 56512-2015: Non-destructive testing. Method of magnetic particle testing. Standard technological processes
GOST R 56963-2016: Locomotives. Lacquer and antidischarge coating requirements and methods of their control
GOST R 57212-2016: Electromagnetic compatibility of technical equipment. Radar absorbing polymer paint coatings. General specifications
GOST R 57410-2017: Unified system of corrosion and ageing protection. Corrosion protection of wares from non-ferrous metal alloys by diffusion treatment with zinc. General requirements for flow process
GOST R 57411-2017: Unified system of corrosion and ageing protection. Corrosion protection of parts made of cast iron or steels by diffusion processing of zinc. General requirements to flow process
GOST R 57419-2017: Unified system of corrosion and ageing protection. Corrosion protection of parts made of super high and high-strength steels by diffusion treatment with zinc. General requirements for flow process
GOST R 57797-2017: Hydraulic jack-pullers. General technical requirements
GOST R 58892-2020: Primer compositions for facade thermal insulation composite systems with external plaster layers. General specifications
GOST R 58893-2020: Polyurethane-based adhesive compositions for fixing the thermal insulation layer in facade thermal insulation composite systems with external plaster layers. Specifications
GOST R 59952-2021: Paint and varnish materials. Technical specifications. General requirements for design and execution
GOST R 70087-2022: Water-dispersion paints for facade thermal insulation composite systems with exterior plaster layers. Technical specifications
GOST R 9.404-2022: Unified system of protection against corrosion and aging (USPCS). Protective organic coatings. Coating systems based on polyethylene powder compositions. General specifications
IM 4-12-95: Automation systems. Handbook of materials. Part 1. Basic materials
M61722: Design Manual for Power Equipment Operating at Voltage Under 1000 V in Explosion-Hazardous Areas Within Industrial Occupancies
M788-1082: Classification for Explosion Hazardous Areas in National and International Codes and Standards
Manual: Manual for impulse and low consumption fire extinguishing systems
Manual for MGSN 2.09-03: Corrosion protection of concrete and reinforced concrete structures of transport facilities
Manual for SNiP 11-01-95: The manual on the initial requirements for the development of design documentation for equipment of individual production (to SNiP 11-01-95)
Manual for SNiP 11-01-95: A collection of explanations of certain provisions and the contents of paragraphs of the Instructions on the procedure for the development, coordination, approval and preparation of project documents for the construction of enterprises, buildings and structures of SNiP 11-01-95 (Questions and Answers)
Manual for SNiP 11-01-95: A guide to SNiP 11-01-95 on the development of a section of project documentation "Organization and working conditions of workers. Production and enterprise management"
Manual for SNiP 11-01-95: Guide to SNiP 11-01-95 on the development of the section of project documentation "Environmental Protection"
Manual for SNiP 3.05.01-85: Manual for the production and acceptance of work when installing ventilation and air conditioning systems
MU 34-70-106-85: Procedural Guidelines for Preservation of Standby Equipment of Stationary Electric Power Generating Stations
ODM 218.2.001-2009: Recommendations for the design and construction of culverts of metal corrugated structures on public roads, taking into account regional conditions (road-climatic zones)
ODM 218.2.036-2013: Guidelines for the design, repair, maintenance and operation of ferries and floating bridges
ODM 218.2.057-2015: Recommendations for use on bridges for drainage trays made of polymer composite materials
ODM 218.2.059-2015: Recommendations for use on bridges, viaducts and tunnels of pedestrian decking (pavements) made of composite materials
ODM 218.2.063-2015: Recommendations for the use of deep-mixing technology to strengthen the weak soils of the road bed
ODM 218.2.087-2017: Recommendations for the design and construction of culverts of spiral-wavy metal corrugated pipes
ODM 218.3.045-2015: Recommendations on the construction of seamless sprayed bridge waterproofing from composite materials on reinforced concrete and steel orthotropic slabs of span structures of bridge structures, as well as on other building structures made of steel and rei
ODM 218.3.046-2015: Recommendations about technology of repair of water throughput pipes with use of composite materials
ODM 218.3.061-2015: Recommendations on the use of composite structures and materials with flammability parameters "NG" for transport infrastructure facilities
ODM 218.3.089-2019: Guidelines for the experimental use of prestressing reinforcement made of high-strength composite materials for reinforcing reinforced concrete bridge structures
ODM 218.3.095-2017: Corrosion protection of concrete and reinforced concrete structures of transport facilities
ODM 218.4.002-2009: Recommendations for protection against corrosion of structures used on the roads of the Russian Federation bridges, fences and road signs
ODM 218.8.008-2017: Guidelines for the use of treatment facilities made of polymer composite materials in the road sector
ONTP 01-85/Minjelektrotehprom: All-Union norms for the technological design of electrical repair shops (departments) of engineering, instrument-making and metalworking enterprises
ONTP 01-86/Minavtotrans RSFSR: All-Union norms for technological design of automobile transport enterprises
ONTP 01-91: All-Union norms for technological design of automobile transport enterprises
ONTP 02-85: National Engineering Design Standards for Lumbering Facilities
ONTP 03-86: National Engineering Design Standards for Machine-Building, Instrument-Building, and Metalworking Facilities. Paint Shops
ONTP 04-85: All-Union norms for technological design of timber transshipment enterprises
ONTP 08-87: All-Union norms for the technological design of engineering, instrument-making and metal-working enterprises. Workshops for the repair of pipelines, sanitary appliances and heat and power equipment
ONTP 09-93: Standards for the technological design of engineering, instrument-making and metal-working enterprises. Mechanical repair shops
ONTP 10-99: Classification of buildings and premises of enterprises by explosion and fire hazards. Fire safety requirements
OST 105-642-78: Pain works. General safety requirements.
OST 107.12.028-2002: Occupational safety standards system. Flammable, combustible, chemically hazardous and harmful substances. Safety requirements for use, storage and transportation
OST 108.030.30-79: Stationary structural steel boilers. General specifications.
OST 108.030.40-79: Pipe elements of hear surfaces, connecting pipes with boiler, land-type steam boiler headers. General specifications.
OST 108.033.01-86: mechanical stokers. Technical conditions.
OST 108.838.10-80: Remote cyclones for low- and middle pressure boilers. General specifications.
OST 24.207.01-90: Pipeline fittings. Casting from cast iron and colour alloys. General specifications.
OST 26.260.18-2004: Process modules for oil and gas industry. General technical specifications
OST 26-01-136-81: Assembling units of steel pipelines on pressure over 9,81 to 98,1 MPa (over 100 to 1000 kgf/cm2) of complete technological lines. General specifications.
OST 26-01-49-82: Assembling units and pipeline details for working pressure of 32 MPa (320 kgf/cm2). General specifications.
OST 26-01-900-79: Copper vessels and devices. General technical specifications.
OST 26-04-280-93: Pipeline fittings of cryogenic equipment products. General specifications.
OST 35-14-82: Occupational safety standards system. Construction of highways. Concrete coatings. Safety requirements at works performance.
OST 35-15-82: Technological processes. Waterproofing of concrete roof panels with mastic compounds in the factory.
OST 36-100.3.13-85: Labour safety standard system. Processing equipment installation. General safety requirements.
OST 36-62-81: Hoisting equipment. General technical requirements.
OST 48-41-91: Engineering products of non-ferrous metallurgy. General Specifications.
OST 95 10439-2002: Equipment for radioactive environments. General technical requirements. Acceptance. Maintenance and repair.
PB 03-381-00: Regulations of installation of vertical cylindrical steel reservoirs (steel scroll tanks) for petroleum and petroleum products
PB 11-242-98: Foundry Safety Requirements
PI 1.2.315-89: Production of glazing parts from organic glasses
PNST 66-2015: Nanomodified antibacterial acrylic paint. Specifications
POT R M-017-2001: Inter-Industry Occupational Safety and Health Regulations for Painting Operations
POT R O 13153-ZhDRM-946-03: Industry rules on labor protection during factory repair of locomotives and freight cars
POT R O 29-001-93: Labor protection regulations for printing companies
POT R O-00-97: Occupational Safety and Health Requirements in the Pulp and Paper and Rosin Industry
POT R O-14000-001-98: Rules on labor protection at enterprises and organizations of mechanical engineering
POT R O-29-002-94: Occupational Safety Rules for Publishers
POT R O-29-003-95: Occupational Safety Rules for Bookstores
POT R O-32-CV-400-96: Labor protection rules for the maintenance and repair of freight cars and refrigerated rolling stock
POT R O-32-TsT-668-99: Rules for labor protection during maintenance and current repair of traction rolling stock and cranes on the railway
POT R O-78-001-96: Rules on labor protection in units of the state fire service of the Ministry of Internal Affairs of Russia
POT R O-97300-11-97: Rules for labor protection in the repair and maintenance of agricultural machinery
POT RO-13153-TsL-923-02: Industry rules for labor protection in the passenger sector of the federal railway transport
POT RZhD 4100612-CTR-062-2015: Temporary rules on labor protection during maintenance and current repair of prototypes of the TEM19 gas locomotive and the GT1h gas turbine locomotive
POT RZhD-4100612-TsP-TsDRP-022-2013: Rules for labor protection, environmental, industrial and fire safety during maintenance and repair of infrastructure facilities of the railway complex of JSC Russian Railways
PPB 01-93*: Fire Safety Rules in the Russian Federation
PPB AS-95: Fire safety regulations for the operation of nuclear power plants
PPBO-157-90: Fire Safety Regulations in the Timber Industry
PUE: Electrical Installation Rules (PUE). Chapter 1.1 General (Seventh Edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.2 Electricity supply and electrical networks (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.7 Grounding and Electrical Safety Precautions (Seven Edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.9 Insulation of electrical installations (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.6 Electric Welding Machines (Seven Edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.10. Electrolysis Plants and Plating Plants (Seventh Edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.8. Acceptance Test Standards (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 4.1. Switchgears up to 1 kV AC and up to 1.5 kV DC (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.1. General part (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.2. Electricity supply and electrical networks (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.3. Selection of conductors by heating, economic current density and by corona conditions (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.4. Selection of electrical devices and conductors for short circuit conditions (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.5. Electricity metering (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.6. Electrical Measurements (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.7. Grounding and Electrical Safety Precautions (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 2.1. Electrical Wiring (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 2.2. Busducts up to 35 kV (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 2.3. Cable lines with voltage up to 220 kV (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 2.4. Overhead power lines with voltage up to 1 kV (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 2.5. Overhead power lines with voltage above 1 kV (Beginning) (with Amendments and additions) (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 3.1. Protection of electrical networks with voltage up to 1 kV (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 3.2. Relay Protection (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 3.3. Automation and telemechanics (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 3.4. Secondary Circuits (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 4.2. Switchgears and substations with voltages above 1 kV (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 4.3. Converter substations and installations (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 4.4. Battery Units (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 5.1. Electrical machine rooms (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 5.2. Generators and Synchronous Compensators (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 5.3. Electric motors and their switching devices (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 5.4. Crane Electrical Equipment (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 5.5. Elevator Electrical Equipment (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 5.6. Condensing Units (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.1. General part (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.1. Electrical equipment of residential, public, administrative and domestic buildings (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.2. Interior lighting (seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.3. Outdoor lighting (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.4. Advertising Lighting (Seventh Edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.5. Lighting fixtures, installation devices (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.2. Electrical installations of entertainment enterprises, clubs and sports facilities (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.3. Electrical Installations in Hazardous Areas (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.4. Electrical Installations in Fire Hazardous Zones (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.5. Electrothermal Plants (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.6. Electric welding machines (sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.7. Peat electrical installations (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 2.5. Overhead power lines with voltages above 1 kV (End) (Sixth edition)
PUE: Electrical Installation Rules (PUE). Applications
PUE: Electrical Installation Rules (PUE). Chapter 6.6. Lighting devices and wiring devices (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.1. General part (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.2. Interior lighting (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.3. Outdoor Lighting (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.4. Advertising Lighting (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.5. Lighting fixtures, installation devices (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.1. Electrical Equipment for Residential and Public Buildings (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.2. Electrical equipment for entertainment enterprises, clubs and sports facilities (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 2.4. Overhead power lines with voltage up to 1 kV (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 2.5. Overhead power lines with voltage above 1 kV (Seventh edition) (with Amendment)
PUE: Electrical Installation Rules (PUE). Chapter 4.1. Switchgears up to 1 kV AC and up to 1.5 kV DC (Seventh Edition)
PUE: Electrical Installation Rules (PUE). Chapter 4.2. Switchgears and substations with voltages above 1 kV (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.8. Acceptance test standards (Seventh edition)
RD 02-01297858-00: Instructions for external insulation of shaped pipeline fittings and valve units with protective polyurethane coating of COPON HYCOTE type, produced by Company 165 E. WOOD, England.
RD 1300-01297858-04-00: Instructions for applying an external protective combination coating based on insulating materials СHEMP-ТЭСHU. Firms E. WOOD, England and "PEPUS" of the firm "Komplast", Russia in sections of underwater crossings of oil and gas products
RD 153-34.0-04.185-2003: Machines and equipment for construction, technical re-equipment and repair of energy facilities. Requirements for design, materials, manufacturing, acceptance and testing
RD 153-34.0-20.518-2003: Standard instructions on protection of heat supply system pipelines against external corrosion
RD 24.207.01-90: Piping fittings. Water-flap average life time dependence on specific pressure on the sealing surface
RD 302-07-16-91: General purpose pipeline valves. Paint coatings. General technical conditions
RD 31.31.41-86: Support Facilities for Loading/Offloading Operations. Design Standards
RD 31.31.54-92: The list of buildings, premises and facilities of maritime transport with the type and class of explosion hazard zones. Minmorflot, Soyuemorniiproekt. 1992
RD 31.52.17-86: Recommendations for artificial heating when painting ships in docks
RD 31.83.04-89: Labour safety rules in companies of the Ministry of Navy of the USSR.
RD 3-1297858-02: Instructions for external insulation with epoxy-polyurethane coating “UP-1000/FRUCS 1000A” in factory and field conditions, for valves, shaped fittings and separate pipeline sections.
RD 34.20.518-95: Standard Guidelines on External Corrosion Protection of Piped Heat Distribution Systems
RD 3661-01297858-02-01: Instructions for complex corrosion protection of storage tanks for petroleum and petroleum products materials company "Ameron", USA
RD 36-62-00: Hoisting equipment. General technical requirements.
RD 39-0147103-328-86: Process Guidelines for Application of Polymer Protective Coatings on the Interior Surface of Field Water Pipes Used for Transport of a Medium Containing Sulfur (Up to 100 mg/liter)
RD 39-132-94: Regulations for Operation, Inspection, Repair and Rejection of the Field Pipelines 1994
RD 39-30-1093-84: Methodology for the accelerated assessment of the service life of polymer coatings to protect oilfield equipment from corrosion
RD 39-3-387-80: Guidelines on Selection and Application of Paints/Coatings and Coating Systems for Interior Insulation of Piping for Field Water Flooding Systems
RD 413160-02-01297858-03: Corrosion protection rules for stock-tank oil vessels and for dynamic and technological oil settling vessels
RD GM-01-02: Guidance Document for Corrosion Protection of Mechanical Equipment and Special Steel Structures of Hydraulic Structures
RDI 26-15-80: Instructions for making inner vessels of isothermal tanks for liquefied carbon dioxide
RM 4-223-89: Industrial Automation Systems. Execution Requirements for Electrical Installations for Automation Systems for Explosion Hazardous Areas
RMD 40-20-2013 Sankt-Peterburg: Designing and installation pipelines for water supply and sewage systems in Saint-Petersburg
RMD 40-20-2016 Sankt-Peterburg: Installation of water supply and drainage networks in St. Petersburg
RSN 40-81: Instructions for use of organosilicate compositions for corrosion protection of metal and other building structures, process equipment and decoration finishes of the building materials and facades of buildings
RST RSFSR 687-83: Cylinders. Repair and technical certification. Rules of repair and examination
Rules 00-97: Rules for Occupational Safety and Health in the Pulp and Paper and Forestry Industries (final)
SP 229.1325800.2014: Reinforced concrete structures of underground and utility systems. Protection against corrosion
SP 28.13330.2012: Corrosion protection of buildings structures. Updated living edition of SNiP 2.03.11-85
SP 363.1325800.2017: Translucent coating and lights of buildings and structures. Desing rules
SP 5183-90: Sanitary rules for foundry production (factories, workshops, sites)
SP 72.13330.2016: Protection of buildings, facilities and structures against corrosion
ST RK 1863-2008: Automobiles, buses and motorcycles of urgent services. Colours diagrams, identification symbols, inscriptions, special light and sound signals. General requirements]
ST RK 2066-2010: Motor roads of public use. Road marking materials. Specification
ST TsKBA 018-2007: Pipe fittings. Heat treatment of blanks (parts) of titanium and titanium alloys. Typical process
ST TsKBA 050-2008: Pipe fittings. Castings from cast iron. Technical requirements
ST TsKBA 051-2008: Pipe fittings. Castings from non-ferrous alloys. Technical requirements
ST TsKBA 079-2010: General purpose pipeline valves. Paint coatings. General technical conditions
ST TsKBA 099-2011: Pipe fittings. Repairs. Organization of repair and general repair manual
STB 1520-2008: Materials for the horizontal marking of roads. Technical conditions
STO-SA-03-002-2009: Rules for the design, manufacture and installation of vertical cylindrical steel tanks for oil and oil products
TSN 52-302-2003: Corrosion Protection of Concrete and Reinforced Concrete Structures of Transport Facilities
TU 102-199-78: Therapeutic and prophylactic unit for hot dry baths
TU 102-236-80: Panels of volume blocks of type OB and boxes of type UB
TU 102-360-85: Aluminum aluminum masts for radio relay communication type MAP
TU 1390-001-86695843-08: Steel pipes with a diameter of 57-1420 mm with an external two-layer and three-layer polyethylene coating
TU 1390-004-86695843-2010: Electrowelded steel pipes with a diameter of up to 1,420 mm with an external anticorrosive polyethylene coating for the construction of trunk pipelines
TU 1390-005-86695843-2010: Steel pipes with outer anti-corrosion polyethylene coating for gas pipelines
TU 1390-007-86695843-2010: Electrowelded steel pipes with a diameter of up to 1,420 mm with an external anti-corrosion polyethylene coating for the construction of field and main oil pipelines
TU 1390-008-86695843-2011: Steel pipes with internal smoothing coating for gas pipelines
TU 1390-010-86695843-2011: Steel pipes and pipeline components welded with an internal anti-corrosion coating based on a paint material with high dry residue
TU 14-3R-67-2003: Electrowelded steel pipes with a diameter of up to 1,420 mm with an external anti-corrosion polyethylene coating for the construction of trunk pipelines. Technical conditions
TU 2310-001-83568382-2008: Composition for the treatment of concrete surfaces "Monolith-20M"
TU 2311-042-21743165-2005: Varnish "Yarly" V-PL-1120. Technical conditions
TU 2312-075-21743165-2005: Enamel "YARLI" V-MA-1232. Technical conditions
TU 34-38-20140-94: Valves of gas pipelines TPP. General technical conditions for major repairs
TU 34-38-20365-94: Power valves. General technical conditions for major repairs
TU 6-10-1052-75: Enamel VL-515 red-brown
TU 6-10-1117-85: Primer EP-057 Protector
TU 6-10-1270-87: Varnish BT-5101
TU 6-10-741-79: PF-167 enamel of various colors
TU 6-10-866-85: Lucky VL-725, VL-725 G and enamel VL-725 aluminum
VSN 176-78: Guidelines for the Design and Installation of Corrugated Metal Pipe Culverts
VSN 214-82: Collected volume of instructions on rust-proofing
VSN 345-86: Use of Epoxy-Shale Coatings for Waterproofing and Corrosion Protection of Steel Piping and Steel and Reinforced Concrete Structures of Industrial Occupancies and Sewage System Facilities
VSN 446-84: Guidelines for Use of Paints and Coatings for Factory-Applied Corrosion Protection of Structural Steel
Customers Who Viewed This Item Also Viewed:
 |
Petroleum products. Method for measurement of viscosity by automatic capillar viscosimeter
Language: English |
Greases. Method for determination of ultimate strength and thermostrengthening
Language: English |
Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads
Language: English |
Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
Language: English |
Pipe fittings. Ball valves made of brass. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.