GOST 13646-68
ГОСТ 13646-68
|
|
Glass mercury thermometers designed for precise measurements
Термометры стеклянные ртутные для точных измерений
Status: Effective. The limitation of effectiveness has been lifted: Decree of the State Standard No. 1328 of 10/07/92
The standard applies to glass mercury thermometers with a uniform scale, designed for accurate temperature measurements from 0 to plus 500 ° C, manufactured for the needs of the national economy and for export.
Стандарт распространяется на стеклянные ртутные термометры с равноделенной шкалой, предназначенной для точных измерений температуры от 0 до плюс 500 °С, изготовляемых для нужд народного хозяйства и для экспорта.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstandart of the USSR,
4/17/1968
SKU: RUSS17569
The Product is Contained in the Following Classifiers:
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
3 Activities of testing laboratories »
3.2 Technical equipment of testing laboratories »
3.2.2 Measuring instruments and test equipment »
3.2.2.3 Temperature measuring instruments »
ISO classifier »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.200 Thermodynamics and Temperature Measurements »
17.200.20 Temperature measuring instruments »
National standards »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.200 Thermodynamics and Temperature Measurements »
17.200.20 Temperature measuring instruments »
National Standards for KGS (State Standards Classification) »
Latest edition »
P Measuring devices. Automation and computing facilities »
P2 Temperature measuring instruments »
П21 Glass mercury medical and meteorological Thermometers »
National Standards for OKSTU »
GENERAL PURPOSE INSTRUMENTS AND AUTOMATION »
Instruments for measuring and regulating temperature »
National Standards for OKSTU »
SPECIAL PURPOSE INSTRUMENTS AND AUTOMATION »
Devices and apparatus made of glass, quartz and porcelain »
As a Replacement Of:
GOST 5.1851-73: Mercury glass thermometers for precise measurements of types TP-1, TP-II, TP-III, TP-IV. Quality requirements for certified products
The Document References:
GOST 10.65-72: Wooden boxes for products supplied for export. General specifications
GOST 1224-71: Thermometer glass. Marks
GOST 13216-74: SSI and automation devices. Reliability. General technical requirements and test methods
GOST 13756-75: SSI and automation devices. General requirements when delivering for export
GOST 14192-77: Marking of cargoes
GOST 16511-77: Wooden boxes for electrical equipment. Specification
GOST 166-73: Vernier callipers. Types. The main parameters. Technical requirements
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 4658-73: Mercury. Specifications
GOST 5244-73: Wood chips
GOST 6.37-79: UDS. System of documentation in foreign Trade. Shipping documentation
GOST 7329-74: Chemical laboratory and electrovacuum glassware. Polarizable and optical method of path-length difference measuring
GOST 7594-75: Magnifying glasses, folding, pocket
GOST 8.001-71: State system of ensuring the unity of measurements. Rules for conducting the state tests of measuring means
GOST 8.157-75: State system for ensuring the uniformity of measurements. The temperature practical scales
GOST 891-75: Paper and board for textile spools and tapers. Specifications
The Document is Referenced By:
FR 1.39.2007.03221: Biological control methods. Method of determining the toxicity of water and water extracts from the soil, sewage sludge, waste from mortality and changes in fertility of ceriodaphnias
FR 1.39.2007.03222: Biological control methods. Methodology for determining the toxicity of water and water extracts from soils, sewage sludge, waste by mortality and changes in the fertility of daphnia
FR 1.39.2007.03223: Biological control methods. Methods for determining the toxicity of water, water extracts from the soil, sewage sludge and waste by changing the level of chlorophyll fluorescence and the number of algae cells
GOST 10181-2000: Concrete Mixtures Test method
GOST 10181-2014: Concrete mixtures. Methods of testing
GOST 10598-82: Air-water coolers for diesels and gas engines with supercharging
GOST 11363-91: Technical dimethyl-terephthalate. Specifications
GOST 12.3.018-79: Occupational safety standards system. Ventilation system. Aerodynamical test methods
GOST 12.4.265-2014: Occupational safety standards system. Personal protective means for works with radioactive substances and materials for their making. Testing method and evaluation of decontamination ratio
GOST 12.4.269-2014: Occupational safety standards system. Personal protective means for works with radioactive substances and materials for their making. Testing method of solutions decontaminating ability
GOST 13211-80: Shell and tube water-oil and water-water type coolers of diesels engines and gas engines. General specifications
GOST 13938.13-93: Copper. Methods of determination of oxygen
GOST 147-95: Solid mineral fuel. Determination of the highest combustion heat and calculation of the lowest combustion heat
GOST 15934.1-91: Copper concentrates. Methods for determination of copper content
GOST 17614-2018: Technical tellurium. Technical requirements
GOST 1791-2014: Wire of nickel and copper-nickel alloys for extending wires for the thermoelectric converters. Specifications.
GOST 1791-67: Wire from nickel and copper-nickel alloys for extension leads to the thermoelectric transducers.
GOST 20910-2019: Concrete is heat-resistant. Technical specifications
GOST 20910-90: Refractory concretes. Specifications
GOST 21216-2014: Clay raw materials. Test methods
GOST 21261-91: Oil products. Method for the determination of gross calorific value and calculation of net calorific value
GOST 23268.12-78: Drinking medicinal, medicinal-table and natural-table mineral waters. Method of determination of permanganate oxidation
GOST 23268.14-78: Drinking medicinal, medicinal-table and natural-table mineral waters. Methods of determination of arsenic ions
GOST 24160-2014: Peat. Methods for determination of water capacity and water absorption
GOST 26449.0-85: Stationary distillation desalting units. General requirements for chemical analysis methods at saline water desalination
GOST 26602.1-99: Windows and doors. Methods of determination of resistance of thermal transmission
GOST 26602-85: Windows. Methods of determination of thermal resistance
GOST 30157.0-95: Textile fabrics. Methods of measures changes determination after wet treatments and chemical cleaning. General
GOST 30559-98: Alumina, nonmetallurgical. Specifications
GOST 31280-2004: Furs and fur products. Harmful substances. Methods of detection and determination of free formaldehyde and washed out chrome (VI) and common chrome contents
GOST 31383-2008: Protection against corrosion of concrete and reinforced concrete constructions. Test methods
GOST 31509-2012: Medical elastic manufactured articles for the fixation and compression. General technical requirements. Test methods
GOST 31626-2012: Plaster of Paris for medical use. General technical requirements. Test methods
GOST 31775-2012: Wax raw material. Specifications
GOST 32037-2013: Non-alcoholic and low-alcoholic beverages, kvases. Method for determination of carbon dioxide
GOST 32038-2012: Beer. Method for determination of carbon dioxide
GOST 32078-2013: Dressed fur and sheepskins. Method of determining shrinkage temperature
GOST 32221-2013: Copper concentrates. Methods of analysis
GOST 32729-2014: Automobile roads of general use. The method of measuring elastic deflection to determine the strength of non-rigid pavement
GOST 33-2000: Petroleum products. Transparent and opaque liquids. Determination of kinematic viscosity and calculation of dynamic viscosity
GOST 33-2016: Petroleum and petroleum products. Transparent and opaque liquids. Determination of kinematic and dynamic viscosity
GOST 33389-2015: Public roads. Deicing materials. Test methods
GOST 33768-2015: Method for determination of kinematic viscosity and calculation of the dynamic viscosity of transparent and opaque liquids
GOST 33-82: Petroleum products. Method for determination of kinematic viscosity and calculation of dynamic viscosity
GOST 34379-2018: Translucent enclosing structures. Rules of inspection of technical conditions under natural conditions
GOST 3625-84: Milk and milk products. Methods for determination of density
GOST 3639-79: Water-alcohol solutions. Methods for the determination of the ethyl alcohol content
GOST 444-2016: Flotation sulphur pyrite. Specifications
GOST 6912.1-93: Alumina. Specifications
GOST 7194-81: Fresh potatoes. Acceptance rules and methods of quality determination
GOST 8.122-99: State system for ensuring the uniformity of measurements. Rotameters. Methods of verification
GOST 8.212-84: State system for ensuring the uniformity of measurements. Measures of electromotive force. Standard cells. Calibration methods and facilities
GOST 8.237-77: State system for ensuring the uniformity of measurements. Measuring resistance coil. Methods and means of verification
GOST 8.250-77: State system for ensuring the uniformity of measurements. Thermometers glass medical maximum. Verification methods and means
GOST 8.279-78: State system for ensuring the uniformity of measurements. Glass liquid working thermometers. Calibration methods
GOST 8.290-2013: State system for ensuring the uniformity of measurements. BU-type viscometers. Verification procedure
GOST 8.292-2013: State system for ensuring the uniformity of measurements. Laboratory conductometers of liquid. Verification procedure
GOST 8.292-84: State system for ensuring the uniformity of measurements. The laboratory conductometers of liquid. Methods of verification
GOST 8.317-78: State system for ensuring the uniformity of measurements. Standard glass mercury thermometers. Methods and means of calibration
GOST 8.400-2013: State system for ensuring the uniformity of measurements. Standard metallic gauges. Verification procedure
GOST 8.528-85: State system for ensuring the uniformity of measurements. Second class reference line gauges and fifth accuracy class working line gauges. Verification procedure
GOST R 50151-92: Alumina. Specifications
GOST R 51219-98: Manufactured articles medical elasticity for the fixation and compression. General technical requirements. Test methods
GOST R 51812-2001: Furs and fur products. Harmful substances. Methods of detection and determination of free formaldehyde and water wash-out chromium (VI) and common chromium content
GOST R 52162-2003: Plaster of pairs for medical use. General technical requirements. Test methods
GOST R 52174-2003: Biological safety. Raw and food-stuffs. Method for the identification of genetically modified organisms (GMO) of plant origin by using biological microchip
GOST R 52616-2006: Live vaccine against anthrax of animals from strain 55-VNIIVV & M. Specifications
GOST R 52804-2007: Protection against corrosion of concrete and reinforced concrete constructions. Test methods
GOST R 52959-2008: Dressed fur and sheepskins. Method of determining the shrinkage temperature
GOST R 53407-2009: Wax raw material. Specifications
GOST R 53498-2009: Plaster type dressing. General technical requirements. Test methods
GOST R 53498-2019: Medical products of a plaster type. General technical requirements. Test methods
GOST R 54354-2011: Meat and meat products. General requirements and methods of microbiological testing
GOST R 54591-2011: Leather and fur. Method of chromium (VI) content determination
GOST R 54758-2011: Milk and milk products. Methods for determination of density
GOST R 54861-2011: Windows and external doors. Methods for determination of thermal transmission resistance
GOST R 55970-2014: Iodized food additives. General specifications
GOST R 56139-2014: Functional foods. Methods for detection and enumeration of probiotic microorganisms
GOST R 56201-2014: Functional food products. Methods for the determination of bifidogenic properties
GOST R 57989-2017: Specialized food products. Methods for the detection of foodborne pathogens based on polymerase chain reaction
GOST R 58236-2018: Medical elastic manufactured articles for the compression. General technical requirements. Test methods
GOST R 58236-2020: Medical elastic compression products. General technical requirements. Test methods
GOST R 59715-2022: Self-compacting concrete mixtures. Test methods
GOST R 8.581-2001: State system for ensuring the uniformity of measurements. Air-heat installations for measuring moisture of cereals and cereal products. Verification procedure
GOST R 8.664-2009: State system for ensuring the uniformity of measurements. BU-type viscometers. Methods of calibration
GOST R 8.682-2009: State system for ensuring the uniformity of measurements. Standard metallic gauges. Methods of verification
GOST R 8.709-2010: State system for ensuring the uniformity of measurements. The laboratory conductometers of liquid. Methods of verification
GOST R 8.722-2010: State system for ensuring the uniformity of measurements. Conductometric liquid analyses. Verification procedure
GOST R 8.877-2014: The state system of measurement assurance. Measures of electromotive force (standard cells) and measures of direct electrical voltage. Methods of verification
IM 14-7-2004: Automation. Instruments for measuring and regulating temperature. Part 2. Thermometers, alarms, indicators, frames, temperature relays, devices are different. Nomenclature directory
MI 1289-86: Guidelines. GSE. Calibration fluids for calibration of viscometers. Metrological certification
MI 1748-87: State system for ensuring uniformity of measurements. Capillary glass viscometers. Method of verification
MI 1983-89: Recommendation. GSE. Air temperature sensor (DTV3), water (DTV)
MI 2391-97: State system for ensuring uniformity of measurements. Flow viscometer of the firm "Sol-Trohn Caressers" (England). Method of verification
MI 2948-2005: Wet gas generators reference dynamic type "Spring". Method of verification
MI 3001-2006: Recommendation. State system for ensuring uniformity of measurements. Fluid density and viscosity converters in-line models 7827 and 7829 from Solartron Mobrey Limited. Dynamic mode calibration technique
MI 3028-2007: Recommendation. State system for ensuring uniformity of measurements. Viscometers of the Solartron mobrey limited firm. Graduation Method
MI 3029-2007: State system for ensuring uniformity of measurements. Viscometers of the firm "Sol-Mon Money Limited". Method of verification
MI 3302-2010: Recommendation. State system for ensuring uniformity of measurements. Fluid density and viscosity converters measuring models 7827 and 7829. Calibration method
MI 88-76: Application of GOST 8.050-73
MU 1.1.3545-18: Methods for the accelerated determination of Campylobacter bacteria in food products and evaluation of their antibiotic resistance
MU 2.3.2.1830-04: Microbiological and molecular genetic evaluation of food products obtained using genetically modified microorganisms
MU 2.3.2.2789-10: Guidelines for the sanitary-epidemiological assessment of the safety and functional potential of probiotic microorganisms used for food production
MU 4.2.2723-10: Laboratory diagnosis of salmonellosis. Detection of Salmonella in food and environmental samples
MU 5916-91: Guidelines for measuring the concentration of carbon disulfide and carbon dioxide in the air of the working area by the luminescent method
MUK 4.1.1619-03: Photometric measurement of mass concentrations of beta-galactosidase in the air of the working area
MUK 4.1.1624-03: Photometric measurement of mass concentrations of beta-glucanase in the air of the working area
MUK 4.1.1642-03: Photometric measurement of mass concentrations of endo-1, 3b-xylanase (xylanase) in the air of the working area
MUK 4.2.1122-02: Organization of control and methods for detection of LisTeria monosyTogenes bacteria in food products
MUK 4.2.1903-04: Food products. Method for the identification of genetically modified sources (GMI) of plant origin using a biological microchip
MUK 4.2.1955-05: Method for detection and determination of bacteria of the genus Salmonella and Listeria monocytogenes based on DNA-RNA hybridization analysis
MUK 4.2.2217-07: Detection of Legionella pneumophila bacteria in environmental objects
MUK 4.2.2321-08: Methods for the determination of Campylobacter spp. In foodstuffs
MUK 4.2.2428-08: Method for the determination of bacteria Cronobacter spp. (Enterobacter sakazakij) in foods for young children
MUK 4.2.2872-11: Methods for identifying and identifying pathogenic bacteria that cause infectious diseases with food by transmission in PCR-based food products with hybridization-fluorescence detection. Methodical instructions
MUK 4.2.3143-13: Determination of the antibiotic activity of enzymes of microbial (bacterial and fungal) origin for use in the food industry
MUK 4.2.577-96: Methods of microbiological control of products for children, clinical nutrition and their components
MUK 4.2.992-00: E. coli O157: H7 Methods for Isolation and Identification of Enterohemorrhagic E. coli
MUK 4.2.999-00: Determining the amount of bifidobacteria in fermented milk products
NPB 167-97*: Fire rescue rope. General technical requirements. Test methods
PND F 12.16.1-10: Methodical recommendations. Determination of temperature, odor, color (color) and transparency in wastewater, including treated wastewater, stormwater and melted snow.
PND F 13.1.30-02: Quantitative chemical analysis of atmospheric air and air emissions. Methods for chromatographic measurement of turpentine mass concentration in industrial emissions from industries related to its individual production and use using a universal disposable sampler
PND F 13.1.31-02: Quantitative chemical analysis of atmospheric air and air emissions. Methods for measuring the mass concentration of chromium hexavalent in industrial emissions of electroplating, metallurgical and chemical production by the photometric method
PND F 13.1.32-02: Quantitative chemical analysis of atmospheric air and air emissions. Gas chromatography method for measuring the mass concentration of esters (ethyl acetate, propyl acetate, butyl acetate, ethyl butyrate, isoamylacetate) in industrial emissions using a universal disposable sampler
PND F 13.1.33-2002: Quantitative chemical analysis of atmospheric air and air emissions. Methods of measuring the mass concentration of ammonia in industrial emissions into the atmosphere by the photometric method
PND F 13.1.42-2003: Quantitative chemical analysis of atmospheric air and air emissions. Methods of measuring the mass concentration of hydrogen chloride in industrial emissions into the atmosphere by the turbidimetric method
PND F 13.1.45-03: Quantitative chemical analysis of atmospheric air and air emissions. Methods for measuring the mass concentration of hydrogen fluoride in industrial emissions by the photometric method
PND F 13.1.46-04: Quantitative chemical analysis of atmospheric air and air emissions. Methods for measuring the mass concentration of sulfuric acid, vapor and aerosols of sulfur trioxide (in terms of sulfuric acid) in industrial emission samples using the turbidimetric method
PND F 13.1.69-09: Method for measuring the mass concentration of hydrofluoric acid salts in terms of fluoride ion in industrial emissions into the atmosphere by the photometric method
PND F 13.1.75-2013: Methods of measuring the mass concentration of sulfuric acid aerosol and soluble sulfates in industrial emissions into the atmosphere by the turbidimetric method
PND F 14.1:2.206-04: Quantitative chemical analysis of water. Methods for measuring the mass concentration of total nitrogen in natural and waste waters by the titrimetric method
PND F T 14.1:2:3:4.11-04: Toxicological control methods. Methods for determining the integral toxicity of surface, including sea, groundwater, drinking water, wastewater, water extracts of soil, waste, sewage sludge by changing the intensity of bacterial bioluminescence using the
R 50.2.041-2004: State system for ensuring uniformity of measurements. Areometers glass. Method of verification
R 50.2.046-2005: State system for ensuring uniformity of measurements. Capillary glass viscometers imported. Method of verification
R 50.2.049-2005: State system for ensuring uniformity of measurements. Medical monitors. Method of verification
RD 153-34.1-11.320-00: Natural Gas. Methods for Measurement of Quality Ratings of Gaseous Fuel Supplied to Thermal Power Stations
RD 153-34.1-43.204-2001: Petroleum-Based and Fireresistant Turbine Oils. Quantitative Method for the Determination of Anticorrosion Properties
RD 31.21.29-85: Test procedure for marine diesel power plants under operating conditions
RD 39-3-944-83: Standard provision for a laboratory that performs oil analyzes during acceptance operations and produced water
RD 50-366-82: Methodological instructions. Falling sphere Geppler viscometer. Methods and means of verification.
RD 50-443-83: Guidelines. Application of GOST 8.395-80 "GSI. Normal measurement conditions during calibration. General requirements"
RD 52.24.446-2008: The mass concentration of Cr (VI) in waters. Measurement technique of photometric method with diphenylcarbazide.
RD 52.24.504-2010: Mass concentration of fats in the waters. Measurement Technique by IR-Photometric Method
RD 52.24.522-2009: Mass concentration of total chromium in the waters. The method of measurement using photometric method with diphenylcarbazide
RD BGEI 37-01: Metrological support. The list of instruments and equipment of the calibration laboratory for cartographic work
RT 07-2011: Means for the adjustment of measuring instruments of hydrometeorological designation
ST RK 1279-2013: Highways and airfields. Methods for determining the roughness of the road surface and friction coefficient for the vehicle wheels to the road surface
ST RK 1798-2008: Electrical cables and wires. Fire hazard indices. Testing methods
ST RK 1884-1-2009: Water Quality. Detection and calculation of fecal streptococcus. Part 1. Miniaturized method (the most probable numbers) by inoculation in liquid medium
STB 1566-2005: Roads automobile. Test methods
STB 1929-2009: Wine products and wine-making raw materials. Method for determination of the volume fraction of ethyl alcohol
STB 1930-2009: Wine products and wine-making raw materials. Method for determination of the mass concentration of volatile acids
STB 1933-2009: Wine products and wine-making raw materials. Method for relative density determination
STB 2158-2011: Construction. Device bridges and pipes. The nomenclature of controlled quality indicators. Quality control of work
STB GOST R 52174-2005: Biological safety. Raw materials and food products. Method of identification of genetically modified sources (GMS) of plant origin with application of biological microchip
TU 24-09-613-84: Electric overhead traveling cranes with a lifting capacity of 5 tons of lightweight construction with electric hoist
TU U 29.4-30482268.002-2001: Check valves, flame arresters and shut-off valves, as well as their combinations for gas-flame treatment of metals types KO, OB, OT
|
Customers Who Viewed This Item Also Viewed:
 |
Limit dimension deviation from 0,1 to 10000 mm and surface shape and arrangement allowances, not specified on drawings.
Language: English |
Vessels and apparatus. Norms and methods of strength calculation. General requirements
Language: English |
Norms of structural design of nuclear power plants with reactors of different types
Language: English |
Mineral fertilizers. Method for determination of dynamic strength and attrition
Language: English |
Diesel fuel EURO. Specifications
Language: English |
Inch thread with a profile angle of 55 degrees
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
