imgalt

GOST 14963-78

ГОСТ 14963-78

Doped steel spring wire

1.5. Проволока групп а, б, в, г должна изготовляться диаметром 1.0-14.0 мм, проволока групп е, н-диаметром 0,5-14,0 мм

Status: Effective - Supersedes. The limitation of the effectiveness period has been lifted: Protocol No. 7-95 of the IGU dated 01.03.95 (IUS 11-1995)

The standard applies to steel alloyed round wire with a special surface finish and without a special surface finish, intended for the manufacture of springs that are subjected to heat treatment (quenching and tempering) after winding.

Стандарт распространяется на стальную легированную проволоку круглого сечения со специальной отделкой поверхности и без специальной отделки поверхности, предназначенную для изготовления пружин, подвергающихся после навивки термической обработке (закалке и отпуску).

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Gosstandart of the USSR, 6/26/1978

SKU: RUSS17582

Price: $134.00



imgalt

The Product is Contained in the Following Classifiers:

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.12 Testing and control of products of metallurgical industry » 4.12.4 Iron and steel products »

ISO classifier » 77 METALLURGY » 77.140 Iron and steel products » 77.140.65 Steel wire, wire ropes and link chains »

National standards » 77 METALLURGY » 77.140 Iron and steel products » 77.140.65 Steel wire, wire ropes and link chains »

National Standards for KGS (State Standards Classification) » Latest edition » V Metals and metal products » V7 Wire and Wire Products » V73 Alloy Steel Wire »

National Standards for OKSTU » METAL PRODUCTS FOR INDUSTRIAL PURPOSE (HARDWARE) » Steel wire from carbon and alloy steel grades »


As a Replacement Of:

GOST 14963-69: Alloyed steel spring wire

The Document References:

GOST 10354-82: Polyethylene film Specifications

GOST 10396-84: Crepe cable paper

GOST 10446-80: Wire. Tensile test method

GOST 10447-93: Wire. Wrapping. Test method

GOST 12344-2003: Alloyed and high-alloyed steels. Methods for determination of carbon

GOST 12344-88: Alloyed and high-alloyed steels. Methods of carbon determination

GOST 12345-2001: Alloyed and high-alloyed steels. Methods of sulphur determination

GOST 12345-88: Alloyed and high-alloyed steels. Methods of sulphur determination

GOST 12346-78: Alloyed and high-alloyed steels. Methods of silicon determination

GOST 12347-77: Alloyed and high-alloyed steels. Methods for determination of phosphorus

GOST 12348-78: Alloyed and high-alloyed steels. Methods of manganese determination

GOST 12349-83: Alloyed and high-alloyed steels. Methods for determination of tungsten

GOST 12350-78: Alloyed and high-alloyed steels. Methods of chromium determination

GOST 12351-2003: Alloyed and highalloyed steels. Methods for determination of vanadium

GOST 12351-81: Steels alloyed and highalloyed. Methods for the determination of vanadium

GOST 12352-81: Steels alloyed and highalloyed. Methods for the determination of nickel

GOST 12355-78: Alloyed and high-alloyed steels. Methods of copper determination

GOST 14192-96: Cargo marking

GOST 14955-77: Quality round steel with a special surface finish

GOST 14959-79: Spring carbon and alloy steel bars. Specifications

GOST 15102-75: Universal metallic closed container of nominal gross mass 5,0 tn. Specifications

GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence

GOST 16272-79: Technical plasticized polyvinylchloride film. Specifications

GOST 1763-68: Steel. Methods for determination of decarbonised layer depth

GOST 18617-83: Wooden cases for hardware. Specifications

GOST 20435-75: Universal metallic closed container of nominal gross mass 3,0 tn. Specifications

GOST 21650-76: Means of fastening tared and break bulk cargoes in the loads units. General requirements

GOST 22225-76: Containers multipurpose gross weight 0,625 and 1,25 t. Specifications

GOST 24597-81: Unitized tared and piece goods cargoes. Main parameters and dimensions

GOST 2789-73: Surface roughness. Parameters and characteristics

GOST 8273-75: Packing paper

GOST 8828-89: Base paper and two-layer waterproof packaging paper

GOST 9569-79: Paraffin paper

The Document is Referenced By:

GOST 13764-86: Cylindrical helical compression (tension) springs made of round steel. Classification

GOST 13768-86: Cylindrical helical compression (tension) springs of I class 3 category made of round steel. Main parameters of coils

GOST 13772-86: Cylindrical helical compression (tension) springs of II class and 3 category made of round steel. Main parameters of coils

GOST 13775-86: Cylindrical helical compression springs of III class and of 2 category made of round steel. Main parameters of coils

GOST 16245-70: Chill moulds. Spring pushers. Construction and dimensions

GOST 16339-70: Support holders for a 250 and 500 kg force rolling heads. Construction and dimensions

GOST 18176-79: Furniture of packing cases. Specifications

GOST 25797-83: Products of lock and hardware for the focal elements of enclosing structures made of aluminum alloys. General specifications

GOST 26510-85: Tools for cold-forming machines. 4Th station dies. Construction and dimensions

GOST 33260-2015: Pipeline valves. Мetals used in pipeline valves production. Basic requirements for choice of materials

GOST R 53811-2010: Automobile engines. Valve springs. Technical requirements and test methods

GOST R 55509-2013: Pipeline valves. Metals used in pipeline valves production. Basic requirements for choice of materials

Manual for SNiP II-23-81*: Manual on the design of steel structures of overhead power lines (VL) power transmission towers and outdoor switchgears (outdoor switchgear) of substations with voltages above 1 kV

Manual for SNiP II-23-81*: Strength Design Guide for Steel Structures

Manual for SNiP II-23-81*: Steel Structural Engineering Tutorial

OST 26-07-2027-80: Symbols of materials in the design documentation.

OST 34-13-922-86: Cylindrical, coil springs, of compression and tension of I class, 3 category, made of round section steel. The main parameters of coils (limitation GOST 13768-68)

OST 34-13-923-86: Cylindrical, coil springs, of compression of I class, 4 category, made of round section steel. The main parameters of coils (limitation GOST 13769-68)

OST 34-13-926-86: Cylindrical, coil springs, of compression and tension of II class, 3 category, made of round section steel. The main parameters of coils (limitation GOST 13772-68)

OST 34-13-929-86: Cylindrical, coil springs, of compression of III class, 2 category, made of round section steel. The main parameters of coils (limitation GOST 13775-68)

OST 3-98-80: Constructional and spring refining steel. Technical requirements.

ST TsKBA 030-2006: Pipe fittings. Springs helical cylindrical. General technical conditions

ST TsKBA 052-2008: Pipe fittings. Requirements for materials of fittings used for hydrogen sulfide environments

ST TsKBA 070-2009: Pipe fittings. Symbol of materials in the design documentation

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Industrial process measurement and control equipment. Reliability. General requirements and test methods
Language: English
Price: $201.00
imgalt
Gauged corrosion-resistant, heat-resistant and high-temperature steel shape
Language: English
Price: $398.00
imgalt
System for ensuring the reliability and safety of construction sites. Loads and impacts. design standards
Language: English
Price: $98.48
imgalt
Heating, ventilation and air conditioning. Fire Safety Requirements
Language: English
Price: $295.00
imgalt
Reliability of atomic power stations and their equipment. General statements and reliability index nomenclature
Language: English
Price: $299.00
imgalt
Electromagnetic compatibility of technical equipment. Technical equipment for nuclear power plants. Requirement and test methods
Language: English
Price: $282.00
imgalt
Billets made of corrosion-resistant steels of 12Х18Н9Т, 12Х18Н10Т, 08Х18Н10Т, 10Х17Н13М2Т, 12Х18Н12Т and 03Х21Н32М3Б types.
Language: English
Price: $96.00
imgalt
Dependability in technics. Terms and definitions
Language: English
Price: $233.00
imgalt
System of products development and launching into manufacture. Technical assignment. Requirements to contents and form of presentation
Language: English
Price: $542.00
imgalt
Reliability in technology. Composition and general rules for setting reliability requirements
Language: English
Price: $205.00
imgalt
Rails of types P38 and P42. Technical conditions
Language: English
Price: $109.00
imgalt
Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications
Language: English
Price: $282.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!