imgalt

GOST 6456-82

ГОСТ 6456-82

Abrasive paper

Шкурка шлифовальная бумажная

Status: Effective - Supersedes. The limitation of effectiveness has been lifted: Protocol No. 2-92 of the IGU dated 05.10.92 (IUS 2-1993)

The standard applies to paper sanding pads intended for abrasive processing of various materials without cooling or with the use of lubricating and cooling fluids based on oil, kerosene, white spirit.

Стандарт распространяется на бумажную шлифовальную шкурку, предназначенную для абразивной обработки различных материалов без охлаждения или с применением смазочно-охлаждающих жидкостей на основе масла, керосина, уайт-спирита.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: USSR State Committee for Standards, 2/18/1982

SKU: RUSS17717

Price: $217.00

English keywords: abrasives;

National keywords: абразивы;

imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 25 Mechanical Engineering »

ISO classifier » 25 MECHANICAL ENGINEERING » 25.100 Cutting tools » 25.100.70 Abrasives »

National standards » 25 MECHANICAL ENGINEERING » 25.100 Cutting tools » 25.100.70 Abrasives »

National Standards for KGS (State Standards Classification) » Latest edition » G Machines, equipment and tools » G2 Industrial tools and accessories » G25 Abrasive tools, diamond and abrasive materials »

National Standards for OKSTU » TOOL, TECHNOLOGICAL TOOLING, ABRASIVE MATERIALS » Flexible tool (sanding paper) on a paper basis »


As a Replacement Of:

GOST 6456-75: Abrasive paper

The Document References:

GOST 1.9-67: State System of Standardization. State Quality Mark. Form, dimensions and application rules

GOST 10127-75: Moisture-proof base paper for abrasive materials

GOST 12172-74: Phenol-polivinylacetyl adhesives. Specifications

GOST 13525.1-79: Fibre semimanufactures, paper and board. Tensile strength and elongation tests

GOST 14192-77: Marking of cargoes

GOST 17622-72: Industrial organic plastic. Specifications

GOST 18277-72: The basis of the abrasive paper. Specification

GOST 2228-81: Paper for bags

GOST 27595-88: Grinding materials and abrasive tools. Packing, marking, transportation and storage

GOST 3252-80: Hide glue. Specifications

GOST 3647-80: Abrasives. Grain sizing. Graininess and fractions. Test methods

GOST 426-77: Rubber. Method for the determination of abrasion resistance under slipping

GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications

GOST 6456-75: Abrasive paper

GOST 7502-80: Measuring metal tapes. Specifications

GOST 7502-89: Measuring metal tapes. Specifications

The Document is Referenced By:

GOST 10054-82: Water-resistant abrasive paper

GOST 10277-90: Putties. Specifications

GOST 10734-64: Lubricating oils containing additives. Method for determination of detergen potential

GOST 10760-76: Electrical insulating varnish ВЛ-941. Specifications

GOST 10851-94: Friction articles manufactured from retinax

GOST 11257-65: Mineral oils. Determination of the stability of energy oils using the static method

GOST 11529-2016: Polyvinylchloride materials for floors. Control methods

GOST 11529-86: PVC materials for floors. Methods of control

GOST 11629-2017: Plastics Method for determining the coefficient of friction

GOST 11629-75: Plastics. Method of test for coefficient of friction

GOST 1186-87: Hard coals. Method for determination of plastometric indices

GOST 12.4.242-2013: Occupational safety standards system. Additional protective footwear for works with radioactive and chemically toxic substances. General technical requirements and test methods

GOST 12251-77: Rubber. Method for the determination of abrasion resistance under rolling with slipping

GOST 12337-84: Motor oils for diesel engines

GOST 12439-79: Abrasive belts and rollers. Dimensions

GOST 12739-85: Knitted fabrics and garments. Method for the determination of abrasion resistance

GOST 13344-79: Waterproof abrasive cloth. Specifications

GOST 13726-78: Aluminium and aluminium alloys strips. Specifications

GOST 13726-97: Aluminium and aluminium alloys strips. Specifications

GOST 14056-77: Hard coals. Rapid method for the determination of dilatometer characteristics in IGI-DMetI apparatus

GOST 16412.9-91: Iron powder. Method of photoelectric spectral analysis of silicon, manganese and phosphorus

GOST 16914-71: Rubber multilayer linoleum-resin

GOST 17177-87: Heat insulating construction materials and products. Methods of control

GOST 17177-94: Thermal insulating materials and products for building application. Test methods.

GOST 17323-71: Engine fuel. Determination of mercaptan and hydrogen sulphide sulphur content by pontentiometric titration

GOST 18136-2017: Masla. Metod opredeleniya stabil'nosti protiv okisleniya

GOST 18136-72: Oils. Method for determination of oxidation stability in a universal apparatus

GOST 18326-87: Low-alloyed zinc sheets for one-stage and multistage etching. Specifications

GOST 18351-73: Magnesium alloy extruded rods. Specifications

GOST 18482-2018: Aluminium and aluminium alloy extruded tubes. Specifications

GOST 18482-79: Aluminium and aluminium alloy extruded pipes. Specifications

GOST 18597-73: Motor fuel. Corrosion testing under water condensation conditions

GOST 18895-97: Steel. Method of photoelectric spectral analysis

GOST 19024-79: Enamels AC-182. Specifications

GOST 19245-93: Perambulators. General specifications

GOST 19657-84: Magnesium alloy pressed profiles. Specifications

GOST 20354-74: Oils for aircraft gas-turbine engines. Method for determination of evaporation loss in evaporating cups

GOST 20458-2022: Grease Torsiol-55. Specifications

GOST 20458-89: Grease Torsiol-55. Specifications

GOST 20502-75: Oils and additives to them. Methods for determination of corrodibility

GOST 20681-75: Corrugated board. Method for determining the resistance to flat compression ( Flat crush test)

GOST 20683-75: End compression test of container board

GOST 20683-97: Container board. Method for determination of edgewise crush resistance (unwaxed edge method)

GOST 20811-75: Paintwork materials. Methods for coating abrasion test

GOST 20944-75: Liquids for aircrafts systems. Method for determination thermo oxidizing stability and corrosion activity

GOST 21443-75: Liquefied hydrocarbon gases for export

GOST 21488-76: Extruded bars of aluminium and aluminium alloys

GOST 21488-97: Pressed bars of aluminium and aluminium alloys. Specifications

GOST 21631-76: Sheets of aluminium and aluminium alloys. Specifications

GOST 22635-77: Magnesium sheets. Technical requirements

GOST 22776-77: Products, made of the abrasive paper

GOST 22985-90: Liquefied hydrocarbon gases. Method for determination of hydrogen sulphide and mercaptan

GOST 23.208-79: Ensuring of wear resistance of products. Wear resistance testing of materials by friction against loosely fixed abrasive particles

GOST 23175-78: Lubricating oils. Method for determination of motor properties and thermal-oxidative stability

GOST 23216-78: Electrotechnical products. Storage, transportation, temporary corrosion protection and packing. General requirements and test methods

GOST 23343-78: Primer ГФ-0119. Specifications

GOST 23438-79: Varnishes of type ПЭ-232, ПЭ-250, ПЭ-250М, ПЭ-250ПМ. Specifications

GOST 23652-79: Transmission oils

GOST 23797-79: Oil for aircraft gas turbine engines. Method for the determination of thermo oxidizing stability in oil volume

GOST 24691-89: Aerosol cans and valves. Method of determination of anticorrosive lining completeness

GOST 24784-81: Enamels ПФ-188. Specifications

GOST 25129-82: Primer GF-031. Specifications

GOST 2622-2016: Manometric tubes made of bronze БрОФ4-0,25 and brass Л63. Specifications

GOST 2622-75: Manometric tubes made of bronze БрОФ4-0,25 and brass Л63. Specifications

GOST 27265-87: Titanium and titanium-alloy filling wire

GOST 27325-87: Products and elements of wood and wooden materials. Method of determination of varnish-and-paint coating adhesion

GOST 27611-88: Cast iron. Photoelectrical special method of analysis

GOST 27809-88: Steel and cast iron. Methods of spectroorganic analysis

GOST 27809-95: Cast iron and steel. Methods of spectrographic analysis

GOST 27820-88: Elements, products of wood and wooden materials. Method for determining resistance to wear of protective and decorative coatings

GOST 27890-88: Decontaminable protective coatings (paints). Adhesion determination by normal pull-off method

GOST 28033-89: Steel. Method of X-ray-fluorescent analysis

GOST 28084-89: Low-freezing cooling liquids. General specifications.

GOST 28379-89: Putties ЭП-0010 and ЭП-0020. Specifications

GOST 2917-76: Oils and additives. Method of test for corrosion influence on metals

GOST 29316-92: Lining artificial leather. Method for determination of resistance to rubbing

GOST 2936-2016: Planc-oval scamless radiator tubes. Specifications

GOST 2936-75: Plane-oval seamless radiator tubes

GOST 30513-97: Abrasive and diamond tools. Test methods for safety

GOST 32683-2014: Edges material based paper impregnated with carbamide-formaldehyde resin. Specifications

GOST 32842-2014: Automobile roads of general use. Bituminous mastics. Test methods

GOST 32845-2014: Automobile roads of general use. Bituminous sealants. Test methods

GOST 33748-2016: Aluminium cans of deep drawing with easy open end. General specifications

GOST 33748-2023: Deep-drawn aluminum cans with easy-open lids. Specifications

GOST 344-85: Emery paper for testing the wearability of rubber

GOST 426-77: Rubber. Method for the determination of abrasion resistance under slipping

GOST 5009-82: Abrasive cloth. Specifications

GOST 5170-73: Repair kits for pneumatic tyres. Specifications

GOST 5734-76: Greases method for the determination of oxidation stability

GOST 5971-78: Enamels for instruments. Specifications

GOST 6321-92: Engine fuels. Method for copper strip test

GOST 8617-2018: Pressed sections of aluminium and aluminium alloys. Specifications

GOST 8617-81: Pressed sections out of aluminium and aluminium alloys. Specifications

GOST 8674-58: Petroleum products. Determination of fractional composition by evaporation method

GOST 8832-76: Paintwork materials. Methods for formation of paint coating for testing

GOST 9.019-74: Unified system of corrosion and ageing protection. Aluminium and magnesium alloys. Accelerated test methods for corrosion crocking

GOST 9.054-75: Unified system of corrosion and ageing protection. Anticorrosive oils, greases and inhibited film-forming petroleum compounds. Accelerated test methods of protective property

GOST 9.083-78: Unified system of corrosion and ageing protection. Paint coatings. Accelerated test methods for durability in liquid corrosive mediums

GOST 9.508-89: Unified system of corrosion and ageing protection. Means of temporary rust protection of metals. Method of protective ability evaluation under the action of hand sweat

GOST 9.602-2005: Unified system of corrosion and ageing protection. Underground constructions. General requirements for corrosion protection

GOST 9.602-2016: Unified system of corrosion and ageing protection. Underground constructions. General requirements for corrosion protection

GOST 9.602-89: Constructions, underground. General requirements for corrosion protection

GOST 9109-81: Primers ФЛ-03k and ФЛ-03Ж. Specifications

GOST 9506.7-74: Brushes for electrical machines. The method for determination of the commutator's characteristics

GOST 9590-76: Laminated paper decorative plastic. Specifications

GOST 9758-2012: Porous inorganic aggregates for construction work. Test methods

GOST 981-75: Mineral oils. Method for determination of oxidation stability

GOST 9972-74: Petroleum turbine oils with additives

GOST R 12.4.239-2007: Occupational safety standards system. Additional protective footwear for works with radioactive and chemically toxic substances. General technical requirements and test methods

GOST R 51104-97: Exported liquefied hydrocarbon gases from Russian region. Specifications

GOST R 51667-2000: Brushes for electrical machines. Methods for determination of the commutator characteristics

GOST R 51756-2001: Aluminium cans of deep drawing with easy open end. Specifications

GOST R 52146-2003: Cold rolled and cold rolled hot-galvanized sheet with polymer coating, prepainted by the continuous coil-coating process. Specifications

GOST R 53542-2009: Aviation engines and their components. Brazing of high-alloy steels in vacuum. General requirements for technological process

GOST R 54153-2010: Steel. Method of atomic emission spectral analysis

GOST R 54301-2011: Cold-rolled electrolyze zinc sheet with polymer coating, repainted by the continuous coil-coating process. Specifications

GOST R 55080-2012: Cast iron. Method of X-ray fluorescence (XRF) analysis

GOST R 55926-2013: Edges material based paper impregnated with carbamide-formaldehyde resin. Specifications

GOST R 56282-2014: Aluminum alloy extruded large solid sections. Specifications

GOST R 57048-2016: Polymer composites system for external reinforcement. Test method for determining pull-off strength from concrete substrate

GOST R 57207-2016: Polymer composites. Test method for shear properties of V-notched test samples

GOST R 57414-2017: Roofing and hydraulic-insulating flexible bituminous and polymeric (thermoplastic or elastomer) materials. Method for determination of hair resistance

GOST R ISO 7176-13-96: Wheelchairs. Methods of tests for determination of coefficient of friction of test surfaces

Manual for SNiP 3.05.01-85: Manual for the production and acceptance of work when installing ventilation and air conditioning systems

MU 34-70-106-85: Procedural Guidelines for Preservation of Standby Equipment of Stationary Electric Power Generating Stations

MVI 60-09: Methodology for measuring the anticorrosion characteristics of samples of mineral and flame-retardant (type OMTI) turbine oils

MVI 62-09: Methodology for measuring the mass fraction of sludge in samples of mineral energy oils

ODM 218.3.095-2017: Corrosion protection of concrete and reinforced concrete structures of transport facilities

OST 1 90113-86: Pressed sections of aluminium alloys. Specifications.

OST 1 92096-83: Cold worked seamless pipes of aluminium alloys. Specifications.

OST 37.002.1153-86: Typical technological process sealing isolation and braiding at the ends of electrical wires. Main provisions.

OST 92-9440-81: Conducting lacquer coating. Technical requirements and typical technological processes.

PI 1.2.315-89: Production of glazing parts from organic glasses

R 3112199-1094-03: Guidelines for the organization of operation of LPG vehicles running on liquefied petroleum gas

RD 153-34.0-45.510-98: Model Guidelines for Operation and Repair of Slip Rings and Brushes of Turbine Generators with Power of 63 MW and Above

RD 153-34.1-43.204-2001: Petroleum-Based and Fireresistant Turbine Oils. Quantitative Method for the Determination of Anticorrosion Properties

RD 153-34.1-43.212-2000: Fire and mineral turbine oils. Method for determining auto-ignition temperature

RD 153-39.4-091-01: Instructions for protection of urban underground pipelines from corrosion.

RD 24.200.04-90: Weld seams. Metallographic method of control of the base metal and welded joints of chemical oil equipment

RD 27.05.01-2017: Guidance document for the repair and maintenance of wheelsets with axleboxes for freight cars of 1520 (1524) mm track gauge main railways

RD 34.10.102-91: Specified Quantity Allowances for Means of Mechanization, Special Accessories, and Tools for Overhaul of Main Energy Equipment of Thermal Power Stations

RD 34.10.103: Industry-Specific Specified Quantity Allowance for Tools, Equipment, Materials, and Aids for Repair and Rehabilitation of Gas Cleaning Equipment of Thermal Electric Powers

RD 34.10.351: Specified Quantity Allowances for Materials for Repair of Turbine Generators

RD 34.17.425-86: Procedural Guidelines for X-Ray Detection of Macrodamage to Metal in Circulation Piping and Housing Equipment of Electric Power Generating Stations

RD 34.21.623-96: Procedural Guidelines for Inspection of Metal Structures of Fuel Supply Trestles

RD 34.35.514-85: Operating Instructions for Surge Protectors

RD 34.35.606: General Guide to Overhaul of Thermal Automation and Measuring Equipment

RD 34.35.619: Pressure Gauges, Vacuum Gauges, and Pressure-and-Vacuum Gauges Type MED, Interchangeable Spring-Loaded with Unified Electrical Output Signal. Guide to Overhaul

RD 52.24.515-2019: Mass concentration of carbon dioxide in water. Measurement procedure by titrimetric and calculation methods

RD 52.68-137-87: Unified industry norms for the consumption of materials and spare parts for the repair and operation of communications (telegraph and fax equipment)

RD 52.68-137-87: Unified industry norms for the consumption of materials and spare parts for the repair and operation of communications (telegraph and fax equipment)

RD 95 10366-89: Deactivating formulations. Methods for determining quality indicators

RD EO 0505-03: Instructions for metal styloscope

Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope

RK 34-38-025-87: Guide to Overhaul of Indicating Pressure Gauges for Precise Measurements Type MTI

STB GOST R 51756-2002: Aluminum banks of deep drawing with easy-to-open lids. Specifications

TU 1390-010-86695843-2011: Steel pipes and pipeline components welded with an internal anti-corrosion coating based on a paint material with high dry residue

TU 38.1011299-2006: IPM 10 aviation oil

TU 6-02-I-015-89: Silicone adhesive sealant Elastosil 137-182 heat-conducting

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Petroleum products. Method for measurement of viscosity by automatic capillar viscosimeter
Language: English
Price: $87.00
imgalt
Greases. Method for determination of ultimate strength and thermostrengthening
Language: English
Price: $71.00
imgalt
Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads
Language: English
Price: $311.00
imgalt
Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
Language: English
Price: $333.00
imgalt
Pipe fittings. Ball valves made of brass. General specifications
Language: English
Price: $398.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!