GOST 9378-93
ГОСТ 9378-93
|
|
Roughness comparison specimens
Образцы шероховатости поверхности (сравнения)
Status: Effective - Supersedes. IUS 10-1994
The standard applies to samples of surface roughness (comparison), intended for comparison visually and by touch with the surfaces of products obtained by machining, polishing, electroerosion, shot blasting and sandblasting.
Стандарт распространяется на образцы шероховатости поверхности (сравнения), предназначенные для сравнения визуально и на ощупь с поверхностями изделий, полученными обработкой резанием, полированием, электроэрозионной, дробеструйной и пескоструйной обработкой.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Committee of the Russian Federation for Standardization, Metrology and Certification,
2/7/1996
SKU: RUSS17739
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
17 Metrology and measurements. Physical phenomena »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
3 Activities of testing laboratories »
3.2 Technical equipment of testing laboratories »
3.2.2 Measuring instruments and test equipment »
3.2.2.6 Instruments, tools and devices for linear, angular, profile and spatial measurements »
ISO classifier »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.040 Linear and angular measurements »
17.040.20 Surface properties »
National standards »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.040 Linear and angular measurements »
17.040.20 Surface properties »
National Standards for KGS (State Standards Classification) »
Latest edition »
P Measuring devices. Automation and computing facilities »
P5 Instruments, tools and devices for linear, angular, profile and spatial measurements »
P52 Instruments and tools for controlling roughness, shape and location of surfaces »
National Standards for OKSTU »
SYSTEMS OF GENERAL TECHNICAL AND ORGANIZATIONAL-METHODOLOGICAL STANDARDS »
Tolerances and landings. Surface cleanliness »
As a Replacement Of:
GOST 9378-75: Surface roughness comparison specimens. Technical requirements
The Document References:
GOST 13762-86: Measuring means for linear and angular measurements. Marking, packing, transporting and storage
GOST 2.601-95: Operational documents
GOST 2789-73: Surface roughness. Parameters and characteristics
GOST 9378-75: Surface roughness comparison specimens. Technical requirements
MI 1850-88: State system for ensuring uniformity of measurements. Samples of surface roughness (comparison). Method of verification
The Document is Referenced By:
GOST 10047-62: High speed steel cutting tools. Specifications
GOST 10083-81: Taper reamers with taper shank
GOST 10304-80: Rivets
GOST 10708-82: Pendulum impact machines
GOST 10791-2011: All-rolled wheels. Specifications
GOST 11018-2011: Traction railway stock wheelsets of 1520 mm gauge railways. General specifications
GOST 11291-81: Carbide and hss tipped woodcutting disk grooving cutters
GOST 11737-93: Hexagon socket screw keys. Specifications
GOST 11871-88: Slotted round nuts, product grade A. Specifications
GOST 12248-2010: Soils. Laboratory methods for determining the strength and strain characteristics
GOST 12248-96: Soils. Laboratory methods for determining the strength and strain characteristics
GOST 12393-77: Fittings for overhead system of electric railways. General specifications
GOST 1336-77: Thread milling cutters. Specifications
GOST 13877-80: Sucker rods and couplings
GOST 13877-96: Sucker rods and sucker rod couplings. Specifications
GOST 13932-80: Combined arbor-type circular mills for woodcutting
GOST 14803-85: Rivets (high precision). General specifications
GOST 14952-75: Combined centre drills. Specifications
GOST 14953-80: Taper countersinks
GOST 1523-81: Straight reamers
GOST 15763-2005: Threaded and flange pipe connections for PN to 63 MPa (to 630 kgf/sq sm). General specifications
GOST 15987-91: Wooden bodied planes
GOST 16463-2016: Solid carbide keyway cutters. Specifications
GOST 16722-71: Shanks for dies of sheet pressing. Technical requirements
GOST 1677-75: Solid counterbores and high steel inserted blade counterbores. Technical requirements
GOST 1695-80: Solid shell-type face mills, side mills and slot mills
GOST 17006-80: Diamond cylinder wheels
GOST 17024-2015: End mills. Specification
GOST 17024-82: End mills
GOST 17199-88: Fitter’s screwdrivers
GOST 17327-95: Bread baking forms
GOST 17438-72: Pliers
GOST 17439-72: Adjustable pliers
GOST 1759.0-87: Bolts, screws, studs and nuts. Specifications.
GOST 18064-2016: Solid carbide boring tools with steel shank. Specifications
GOST 18064-72: Solid carbide boring tools with steel shank. Specifications
GOST 18123-82: Washers
GOST 19126-2007: Medical metallic instruments. General specifications
GOST 19316-98: Centrifugal moulds. Specifications
GOST 19330-2013: Masts (poles) for overhead contact line supports of railways. Specifications
GOST 19410-74: Metal core boxes. Specifications
GOST 19437-81: Cylindrical aluminium ingots. Specifications
GOST 19853-74: Lubricating plugs. Specifications
GOST 2021-90: Ship's steel manholes. Specifications
GOST 20698-75: Twist drills for hard to machine materials. Specifications
GOST 21643-2022: Medical staplers. General technical conditions
GOST 22685-89: Moulds for making control specimens of concrete. Specifications
GOST 22749-77: Form-relieved milling cutters
GOST 23747-88: Doors of aluminium alloys. Specifications
GOST 24360-2016: Shell and mills with inserted carbide teeth. Specifications
GOST 24741-2016: Joint for connection of crane rails to steel crane girders. Specifications
GOST 25088-98: Ship's doors. Specifications
GOST 25779-90: Toys. General safety requirements and control methods
GOST 26215-84: Hand-held wood-saws
GOST 26596-2016: Face milling cutters with mechanically clamped indexable carbide inserts. Specifications
GOST 26596-91: Non-adjustable milling cutters
GOST 26613-2016: Lathe tools with mechanically clamped changeable indexable inserts. Specifications
GOST 26665-97: Metal bodies planes. Specification
GOST 2679-2014: Slitting and cutting cutters. Specifications.
GOST 2679-93: Metal slitting and cutting-off saws
GOST 26862-86: Rins. General specifications
GOST 26969-86: Standard orifice plates for flow meters. Specifications
GOST 27358-87: Press moulds for manufacturing of plastic items
GOST 27724-88: Drills with mechanical fixation of replaceable polyhedral plates
GOST 28241-89: Hand wise. Specification.
GOST 28281-89: Side milling cutter for cutting of sprocket teeth for driving roller and sleeve-type chains
GOST 28433-90: Retrievers
GOST 28434-90: Overhead travelling stacker cranes
GOST 28436-90: End mills with mechanically clamped insrtr tips
GOST 28438-90: Disk milling cutters with mechanically clamped many-sided hard-alloy inserts
GOST 28487-2018: Thread shouldered connections with tool-joint thread of drill string elements. General technical requirements
GOST 28719-90: Shell-type helical-flute cylindrical face milling cutters with replaceable carbide inserts
GOST 28777-2016: Furniture. Children's beds. Test methods
GOST 28950-91: Drawing instruments. General technical requirements and test methods
GOST 29092-91: Cylindrical milling cutters
GOST 30456-2021: Metal products. Steel pipes, rolled steel plates and coils. Falling load impact test method
GOST 30629-2011: Materials and products facing of rocks. Test methods
GOST 30629-99: Cladding materials and products made of natural stone. Test methods
GOST 30803-2014: Transmission tooth gears of the traction railway stock. Specifications
GOST 31.0101.01-89: Hand wheels, rotating levers, handles, and knobs
GOST 31.1066.03-97: Central arbors for exact operations
GOST 31.1066.04-97: Attachments for metal-cutting tools. Cam arbors. General specifications
GOST 31.111.42-83: Parts and subunits of modular work tools for metal-cutting machines
GOST 31.2031.02-91: Readjusted collapsible devices for part assembly under welding
GOST 31.211.42-93: Elements and assembly units of detachable fixtures for assembly and welding
GOST 31537-2012: Wheelset assembly for locomotives and motor-powered units using shrink fit method. Typical technological process
GOST 32309-2013: Casting utensils of aluminium alloys. General specification
GOST 32309-2019: Dishes without non-stick coating cast from aluminum alloys. General specifications
GOST 32405-2013: Solid hardmetal end mills. Specifications
GOST 32583-2013: Stainless steel table and kitchen cutlery. General specifications
GOST 32623-2014: Automatic tensioning devices of overhead contact line of railway. General specifications
GOST 33078-2014: Automobile roads of general use. Methods for measuring the adhesion of a coated car wheel
GOST 33187-2014: Disk springs for rail joints. Specifications
GOST 33200-2014: Axles for wheelsets of railway rolling stock. General specifications
GOST 33435-2015: Control, monitoring and safety means of railway rolling stock. Safety requirements and control methods
GOST 33529-2015: Band saws with cutting elements, welded stellate. Specification
GOST 33532-2015: Saws frame and tare with cutting elements, welded with stellate, for vertical sawmills. Specification
GOST 33535-2015: Connections and crossings of railway tracks. Specifications
GOST 33758-2016: Pipes for use as casing or tubing and couplings for them. Basic parameters and inspection of thread connections. General technical requirements
GOST 33797-2016: Cross beams of rigid portals for overhead contact line of railway transport. General specifications
GOST 34117-2017: Cookware and tableware made of corrosion-resistant steel for children and teenagers. Technical conditions
GOST 34202-2017: Carbide burrs Technical conditions
GOST 34295-2017: Shaped charge. Specifications
GOST 34296-2017: High-explosive torpedoes. Specifications
GOST 34297-2017: Cumulative pipe cutters. Specifications
GOST 34385-2018: Axle-boxes and adapters for wheelsets of freight wagon bogies. General specifications
GOST 3449-84: Taps. Specifications
GOST 34525-2019: Stainless steel sinks. Technical conditions
GOST 34854-2022: Calibers for connections with tapered threads of casing, tubing, drilling and pipeline pipes. Methods of measuring geometric parameters
GOST 3608-78: Rings for ring spinning and ring doubling frames. Specifications
GOST 4045-75: Hand-operated bench vice
GOST 4047-82: Rim saws for metal cutting
GOST 4229-94: Colter knives. Specifications
GOST 4230-93: Garden knives
GOST 4491-2016: Cast centers of wheels for railway rolling stock. General specifications
GOST 4752-79: Copper cylinder wire
GOST 4835-2013: Wheelsets for freight and passenger car. Technical specifications
GOST 5286-2022: Screw-in steel pipe clamps for drill pipes. General technical requirements
GOST 538-2001: Locks and building hardware. General specifications
GOST 538-2014: Locks and building hardware. General specifications
GOST 538-88: Lock and building hardware
GOST 5547-93: Engineer's and lineman's pliers. Specifications
GOST 5688-2015: Tools with carbide tips. Specifications
GOST 5688-61: Tools with carbide tips. Specifications
GOST 5756-81: Carbide tipped twist drills
GOST 5808-77: Half-side and side-and-face milling cutters with inserted carbide blades. Techical specifications
GOST 6396-78: Carbide-tipped keyway milling cutters. Specifications
GOST 6737-80: Drawing frames for cotton and chemical fibers
GOST 7075-80: Manual Traveling Underrunning Cranes Specifications
GOST 7210-75: Hand-held metal-cutting shears
GOST 7213-72: Center punches
GOST 7236-93: Flat-nose pliers. Specifications
GOST 7283-93: Round nose pliers. Specifications
GOST 7328-2001: Weights. General specifications
GOST 7370-2015: Railway frogs. Specifications
GOST 7599-82: Machine-tools, metal-working
GOST 7890-93: Travelling single girder suspended cranes. Specifications
GOST 8.247-2004: State system for ensuring the uniformity of measurements. Sounding sticks for oil product level measuring in horizontal tanks. Calibration methods
GOST 8.393-2010: State system for ensuring the uniformity of measurements. Optical Quadrants. Verification procedure
GOST 8.411-81: State system for ensuring the uniformity of measurements. Lever micrometres. Rules and procedure of verification
GOST 8.453-82: State system for ensuring the uniformity of measurements. Balance for static weighting. Methods and means for verification
GOST 8034-76: Small spiral drills with diameter from 0,1 to 1,5 mm and thickened cylindrical tails. Specifications
GOST 8543-71: Slotting relieved milling cutters. Specifications
GOST 9140-2015: Slot drills with cylindrical, Morse taper and 7:24 taper shanks. Specifications
GOST 9140-78: Keyway cutters. Specifications
GOST 9193-77: Warping machines Technical conditions
GOST 9305-2014: Profile convex, concave milling and corner rounding cutters. Specifications
GOST 9305-93: Convex and concave form half-round milling cutters and corner rounding cutters
GOST 9324-2015: Worm-type complete fine milling cutters for cylindrical gears with involute profile. Specification
GOST 9509-74: Scales and dosimeters. Knife-edges and bearings of steel. General requirements
GOST 980-80: Flat ring saws for wood sawing
GOST OIML R 111-1-2009: State system for ensuring the uniformity of measurement. Weights of accuracy classes E1, E2, F1, F2, M1, M1-2, M2, M2-3 and M3. Part 1 Metrological and technical requirements.
GOST R 50.05.09-2018: Conformity assessment system in the field of atomic energy use. Conformity assessment in the form of control. Unified techniques. Capillary control
GOST R 50300-92: Turning tools with indexable inserts of superhard materials. Specifications
GOST R 50753-95: Cylindrical helical compression (extension) springs made of special steels and alloy. General specifications
GOST R 50864-96: Tool-joint tapered thread for drill string elements. Profile, dimensions, technical requirements
GOST R 51161-2002: Sucker rods, mouth stocks and couplings for them. Specifications
GOST R 51161-98: Glass reinforced plastic sucker rods. Specifications
GOST R 51162-2019: Dishes without non-stick coating cast from aluminum alloys. General specifications
GOST R 51162-98: Casting aluminium utensils. General specifications
GOST R 51555-99: Toys. General safety requirements and methods of tests. Mechanical and physical properties
GOST R 51687-2000: Stainless steel table and kitchen cutlery. General specifications
GOST R 52419-2005: Carbide tipped shell-type milling cutters for machining wood materials and plastics. Specifications
GOST R 52589-2006: Carbide tipped end milling cutters for machining wood materials and plastics. Specifications and safety requirements
GOST R 52590-2006: Superhard tipped end milling cutters for machining wood materials and plastics. Specifications and safety requirements
GOST R 52780-2007: Hardmetal burrs. Specifications
GOST R 52786-2007: Hinge and pliers tools. Safety requirements and methods of test
GOST R 53003-2008: Slot drills with cylindrical, Morse taper and 7:24 taper shanks. Specifications
GOST R 53004-2008: T-slot cutters. Specifications
GOST R 53191-2008: Wheelset assembly for locomotives and motor-powered units using shrink fit method. Typical technological process
GOST R 53365-2009: Pipes for use as casing or tubing and couplings for them. Basic parameters and inspection of thread connections. General technical requirements
GOST R 53412-2009: Woodruff keyseat cutters. Specifications
GOST R 53443-2009: Motor vehicles. Piston pins of automobile engines. General technical requirements and methods of tests
GOST R 53664-2009: High-strength cheese-head and conical bolts for bridge building. Nuts and washers for them. Specifications
GOST R 53906-2010: Toys. General safety requirements and methods of tests. Mechanical and physical properties
GOST R 53923-2010: Diamond and cubic boron nitride (elbor) grinding wheels. Specifications
GOST R 53925-2010: Pliers and nippers. General technical requirements, methods of control, tests
GOST R 53926-2010: End milling cutters with shell-type inserted blades for woodcutting. General specifications
GOST R 53927-2010: Shell-type inserted blade circular cutterbloks for woodcutting. General specifications
GOST R 53935-2010: Screwdrivers for fitting and assembling for recessed screws and wood screws. General technical requirements, methods of control and tests
GOST R 54156-2010: Table utensils made from stainless steel for children and teenagers. Specifications
GOST R 54270-2010: Masts (Poles) for overhead contact line supports of railways. Specifications
GOST R 54488-2011: Adjustable wrenches. Specifications
GOST R 54489-2011: Circular saws for cutting logs machines and automatic lines. General technical requirements
GOST R 54490-2011: Superhard tipped circular saws for machining wood materials and plastics. General specifications
GOST R 54560-2011: Fiberglass reinforced thermosetting plastic pipes and parts of pipelines. Specifications
GOST R 54560-2015: Fibre reinforced thermosetting plastic pipes and parts of pipelines. Specifications
GOST R 54561-2011: Hygienic coatings of containers used for food products transportation and storage. General technical requirements
GOST R 54798-2011: Control, monitoring and safety means of railway rolling stock. Safety requirements and control methods
GOST R 55068-2012: Glass-fibre and basalt-fibre reinforced epoxy plastic pipes and parts of pipelines. Specifications
GOST R 55075-2012: Sections of pipelines derived from composite materials intended for installation and rehabilitation of public water and wastewater systems. Specifications
GOST R 55186-2012: Cross beams of rigid portals for overhead contact line of railway transport. General specifications
GOST R 55432-2013: Turn blades for machining wood materials and plastics. Technical requirements
GOST R 55498-2013: Rolled wheel centres for railway rolling stock. Technical specifications
GOST R 55777-2013: Shape charges. Technical conditions
GOST R 55779-2013: Cases of cumulative punches. Technical conditions
GOST R 55780-2013: Packer explosive. Technical conditions
GOST R 55781-2013: Means of delivering cement. Technical conditions
GOST R 55782-2013: Means of initiation and transmission of detonation. Technical conditions
GOST R 55783-2013: High-explosive torpedoes. Technical conditions
GOST R 55784-2013: Cutters cumulative. Technical conditions
GOST R 56064-2014: Safety of attractions. Capital repair of attractions. Procedure
GOST R 56207-2014: Slabs and tiles of engineered stone on the basis of natural quartz. Specifications
GOST R 57054-2016: Mining equipment. Tubing cast iron. Sets of tubing rings. General specifications
GOST R 57942-2017: Polymer composite sheet piles. General technical requirements and test methods
GOST R 57981-2017: Hexagon socket screw keys. Specifications
GOST R 58432-2019: Laser hardening of mechanical engineering parts. Technological process
GOST R 58612-2019: Composite wheels of a railway rolling stock. Assembly process specifications
GOST R 70532-2022: Cutters with tungsten carbide inserts for machining T-slots. Specifications
GOST R 70533-2022: Key cutters equipped with tungsten carbide plates. Specifications
GOST R 70595-2022: Shipboard fittings. General specifications
GOST R 8.671-2009: State system for ensuring the uniformity of measurements. In process gauges of linear parameters. Verification methods
GOST R 8.677-2009: State system for ensuring the uniformity of measurements. Cylindrical thread gauges. Verification procedure
I 23 SD-80*: Instructions for flaw detection of pipe bends made of pearlite steel
MI 1585-86: Guidelines. GSE. Device type 2URI. Method of verification
MI 1601-87: Methodical instructions. GCI micrometer gauge for verification of sentry type indicators. PMI type. Verification procedure
MI 1673-87: State system for ensuring uniformity of measurements. Stakes and supports for gage heads. Methods of control
MI 1937-88: Gauges for taper connections. Methods of control
MI 2006-89: State system for ensuring uniformity of measurements. Depth gauge indicators. Verification procedure
MI 2007-89: State system for ensuring uniformity of measurements. Testing and marking plates. Method of verification
MI 2024-89: State system for ensuring uniformity of measurements. Metal measuring rulers. Method of verification
MI 2029-89: Calibration and marking prisms with one prismatic recess and grip. Methods of control
MI 2031-89: Calibration and marking iron prisms. Methods of control
MI 2066-90: Sets of accessories to plane-parallel end measures of length
MI 2077-90: Micrometers with inserts
MI 2087-90: Recommendation. State system for ensuring uniformity of measurements. Micrometers desktop with a dial reading device. Method of verification
MI 2131-90: Goniometers with nonius
MI 2190-92: State system for ensuring uniformity of measurements. Shtangenreysmasy. Method of verification
MI 2192-92: State system for ensuring uniformity of measurements. Indicators of the watch type with a division value of 0.01 mm. Method of verification
MI 2196-92: Depth gauges
MI 2585-2000: State system for ensuring uniformity of measurements. Diaphragm measuring piping. Primary calibration technique
MI 2638-2001: State system for ensuring uniformity of measurements. Chamber and tubeless diaphragms installed in flanged connections of measuring pipelines. Dimensional control methods for the primary and periodic calibration of measuring systems with restricting devices
MI 2673-2001: State system for ensuring uniformity of measurements. Standard and general purpose mass measures. Method of testing on the reference scales and comparators of the firm "Mettler-Toledo GmbH"
MI 524-2010: State system for ensuring uniformity of measurements. Shtangenzubomery with vernier SHZN-18, SHZN-40. Method of verification
MI 524-89: Recommendation. GSE. Stangenzubomery with nonius. Types of SHZN-18, SHZN-40. Method of verification
MP 001-06-2012: Micrometers MK, ML, MT, MZ. Verification Method
MP 114-233-2018: GSI. Special flat angle measures
MU 0898-00.001: Methods of conducting non-destructive testing of hooks of lifting and transport equipment (automobile, tractor, trailer cranes and crane beams)
MU 29-86: Application at the enterprises of the industry GOST 2789-73 "Surface roughness. Parameters and characteristics" and GOST 2.309-73 "Designation of surface roughness"
NPB 159-97*: Fire fighting equipment. Fire monitors combined. General technical requirements. Test methods
OST 108.004.10-86: Quality control program of nuclear energetics products.
OST 108.030.124-85: Details and prefabricated units made of pearlitic steels for pipelines with environment pressure P>2.2 MPa (22 kg/cm2) in nuclear power plants. General Specifications.
OST 24.125.60-89: Details and prefabricated units of steam and hot water in thermal power plants. General Specifications.
OST 26-02-1015-85: Tube fastening to tube sheets.
OST 32.146-2000: Devices of railway automation, telemechanics and telecommunications. General specification requirements
PR 32 TsSh 001-2001: Rules for metrology. Methodical instructions. Metrological support of control patterns for linear parameters of sorting slide retarders
RD 16.407-2000: Explosionproof electrical apparatus. Repair
RD 27.05.01-2017: Guidance document for the repair and maintenance of wheelsets with axleboxes for freight cars of 1520 (1524) mm track gauge main railways
RD 34.10.130-96: Instructions for visual and measuring control.
RD 34.17.415-96: Instructions for ultrasonic inspection of power equipment fasteners.
RD 34.30.507-92: Procedural Guidelines for the Prevention of Corrosion Damage to Disk and Blade Apparatus of Steam Turbines in Phase Transition Zone
RD EO 0198-2000: Maintenance and repair of NP systems and equipment. Assembly of flange connections. General technical requirements
ST SSFZhT TsL-TsT 146-2003: Cast wheel centers for rolling stock of 1520 mm gauge railways. Typical methods of control of the macrostructure
ST TsKBA 030-2006: Pipe fittings. Springs helical cylindrical. General technical conditions
ST TsKBA 084-2010: Elements of pipelines. Parts and assembly units of titanium alloys for nuclear power plant pipelines. General technical conditions
ST TsKBA 099-2011: Pipe fittings. Repairs. Organization of repair and general repair manual
STB 813-93: Scissors. General specifications
TU 1310-043-38948552-2017: Hot-deformed seamless tubes mechanically machined from corrosion-resistant steel 08X18H10T
TU 14-3R-197-2001: Seamless pipes made of corrosion-resistant steel with high surface quality. Technical conditions
TU 3113-028-00220302-01: Heaters of steam and water-to-water for heating networks of heating and hot water systems. Technical conditions
TU 3612-023-00220302-01: Shell-and-tube heat exchangers with a floating head, shell-and-tube with U-tubes and tube bundles for them
TU 3612-024-00220302-02: Shell and tube heat exchangers with fixed tube sheets and shell and tube with temperature compensator on the shell
TU 3612-100-00220302-2005: Shell and tube heat exchangers, tube bundles for them and heat exchangers "pipe in pipe". General technical conditions
TU 36-1395905-015-95: A set of structures of buildings of arched type. Technical conditions
TU 3644-006-00220302-99: Shell-and-tube heat exchangers for special purposes. Refrigeration evaporators and condensers
TU 95.349-2000: Longitudinal electric-welded pipes from steel grades 08X18H10T, 12X18H10T for atomic electric and thermal stations. Technical specifications
Customers Who Viewed This Item Also Viewed:
 |
State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure
Language: English |
Petroleum products. Method for measurement of viscosity by automatic capillar viscosimeter
Language: English |
Greases. Method for determination of ultimate strength and thermostrengthening
Language: English |
Electric heating devices for heating rolling stock railways. Safety requirements and test methods
Language: English |
Ice cream. General technical requirements
Language: English |
Pipe fittings. Ball valves made of brass. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.