imgalt

GOST 28203-89

ГОСТ 28203-89

Basic environmental testing procedures. Part 2. Tests. Test Fc and guidance: Vibration ( sinusoidal )

Основные методы испытаний на воздействие внешних факторов. Часть 2. Испытания. Испытание Fс и руководство: Вибрация (синусоидальная)

Status: Effective - Introduced for the first time. IUS 12-1989

This standard establishes the basic test methods for external factors.

Настоящий стандарт устанавливает основные методы испытаний на воздействие внешних факторов

Choose Language: 
Format: Electronic (pdf/doc)

Approved: USSR State Committee for Standards, 8/15/1989

SKU: RUSS17776

Price: $574.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 19 Tests »

Standards for pipe fittings (TPA) » 11. Piping valves (TPA) tests » 11.3 Additional test procedures » 11.3.2 Seismic and vibration resistance tests, noise measurement »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 2 Tests for external factors » 2.1 General requirements for tests on external factors »

ISO classifier » 19 TESTS » 19.040 Climatic tests »

National standards » 19 TESTS » 19.040 Climatic tests »

ISO classifier » 31 ELECTRONICS » 31.020 Electronic components in general »

National standards » 31 ELECTRONICS » 31.020 Electronic components in general »

National Standards for KGS (State Standards Classification) » Latest edition » E Electronic engineering, electronics and communications » E2 Elements of electronic equipment » E29 Test methods. Packaging. Marking »

National Standards for OKSTU » ELECTRONIC EQUIPMENT PRODUCTS. CONDENSERS »

National Standards for OKSTU » ELECTRONIC EQUIPMENT PRODUCTS. SEMICONDUCTOR DEVICES AND INTEGRAL MICROCIRCUITS »

National Standards for OKSTU » ELECTRONIC PRODUCTS, EXCEPT RESISTORS, CAPACITORS, SEMICONDUCTOR DEVICES AND INTEGRAL MICROCIRCUITS »


The Document References:

GOST 28198-89: Basic environmental testing. Part 1. General and quidance

GOST 28220-89: Basic environmental testing procedures. Part 2. Tests. Test Fd: Random vibration wide band. General requirements

GOST 28221-89: Basic environmental testing procedures. Part 2. Tests. Test Fda: Wide band random vibration. High reproducibility

GOST 28222-89: Basic environmental testing procedures. Part 2. Tests. Test Fdb: Random vibration wide band. Reproducibility medium

GOST 28223-89: Basic environmental testing procedures. Part 2. Tests. Test Fdc: Random vibration, wide band. Reproducibility low

GOST 28231-89: Basic environmental testing procedures. Part 2. Tests. Mounting of components, equipment and other articles for dynamic tests including shock (Ea), bump (Eb), vibration (Fc and Fd) and steady-state acceleration (Ga) and guidance

The Document is Referenced By:

GOST 14014-91: Digital instruments and measuring transducers of voltage, current and resistance

GOST 16019-2001: Equipment for land mobile radio communication. Requirements for mechanical and environmental resistance and test methods

GOST 28198-89: Basic environmental testing. Part 1. General and quidance

GOST 28219-89: Basic environmental testing procedures. Part 2. Tests. Guidance on change of temperature tests

GOST 28220-89: Basic environmental testing procedures. Part 2. Tests. Test Fd: Random vibration wide band. General requirements

GOST 28221-89: Basic environmental testing procedures. Part 2. Tests. Test Fda: Wide band random vibration. High reproducibility

GOST 28222-89: Basic environmental testing procedures. Part 2. Tests. Test Fdb: Random vibration wide band. Reproducibility medium

GOST 28231-89: Basic environmental testing procedures. Part 2. Tests. Mounting of components, equipment and other articles for dynamic tests including shock (Ea), bump (Eb), vibration (Fc and Fd) and steady-state acceleration (Ga) and guidance

GOST 28232-89: Basic environmental testing procedures. Part 2. Tests. Guidance on the application of the tests of IEC publication 68 to simulate the effects of storage

GOST 28578-90: Semiconductor devices. Mechanical and climatic test methods

GOST 28608-90: Fixed resistors for use in electronic equipment. Part 1. General specification

GOST 28811-90: Electromechanical switches for use in electronic equipment. Sectional specification for lever (toggle) switches

GOST 28896-91: Fixed capacitors for use in electronic equipment. Part 1. General specifications

GOST 30011.5.1-2012: Low-voltage switchgear and control gear. Part 5-1. Control circuit devices and switching elements. Section 1. Electromechanical control circuit devices

GOST 30012.1-2002: Direct acting indicating analogue electrical measuring instruments and their accessories. Part 1. Definitions and general requirements common to all parts

GOST 30012.1-93: Direct acting indicating analogue electrical measuring instruments and their accessories. Part 1. Definitions and general requirements common to all parts

GOST 30206-94: Alternating current static watt-hour meters for active energy ( accuracy classes 0,2 S and 0,5 S)

GOST 30207-94: Alternating current static watt-hour meters for active energy (accuracy classes 1 and 2)

GOST 30546.2-98: Seismic stability tests for machines, instruments and other industrial products. General guidance and test methods

GOST 30852.14-2002: Electrical apparatus for explosive gas atmospheres. Part 15. Type of protection n

GOST 30852.8-2002: Explosionproof electrical apparatus. Part 7. Type of protection e

GOST 31610.7-2012: Electrical apparatus for explosive gas atmospheres. Part 7. Increased safety «e»

GOST 31817.1.1-2012: Alarm systems. Part 1. General requirements. Section 1. General

GOST 31818.11-2012: Electricity metering equipment (а.с). Particular General requirements. Tests and test conditions. Part 11. Meters for electric energy

GOST 32321-2013: Alarms guarding surface shock-contact glass break detectors for use in buildings. General requirements and test methods

GOST 33787-2016: Railway application. Rolling stock equipment. Shock and vibration

GOST 33787-2019: Equipment of railway rolling stock. Shock and vibration test

GOST 33897-2016: Railway telecommunications. Safety requirement control methods

GOST 33966.1-2016: Escalators and moving walks. Safety requirements for construction and installation

GOST 33966.1-2020: Escalators and passenger conveyors. Part 1. Safety requirements for device and installation

GOST 34005-2016: Motor vehicles. Digital tachographs. Technical requirements and test methods

GOST 34005-2022: Automotive vehicles. Digital tachographs. Technical requirements and test methods

GOST 34024-2016: Safe locks. Requirements and methods of tests for resistance to unauthorized opening

GOST 34025-2016: Alarms guarding surface sonic glass break detectors for use in buildings. General technical requirements and test methods

GOST EN 1760-1-2004: Safety of machinery. Pressure sensitive protective devices. Part 1. General principles for the design and testing of pressure sensitive mats and pressure sensitive floors

GOST IEC 60127-6-2013: Miniature fuses. Part 6. Fuse-holders for miniature fuse-links

GOST IEC 60252-1-2011: AC motor capacitors. Part 1. General. Performance, testing and rating. Safety requirements. Guidance for installation and operation

GOST IEC 60252-2-2011: AC motor capacitors. Part 2. Motor start capacitors

GOST IEC 60838-2-2-2013: Miscellaneous lamp holders. Part 2-2. Particular requirements. Connectors for LED-modules

GOST IEC 60947-1-2014: Low-voltage distribution and control equipment. Part 1. General rules

GOST IEC 60947-1-2017: Low-voltage distribution and control equipment. Part 1. General rules

GOST IEC 60947-5-1-2014: Low-voltage switchgear and controlgear. Part 5-1. Control circuit devices and switching elements. Electromechanical control circuit devices

GOST IEC 60947-5-5-2017: Low-voltage distribution and control equipment. Part 5-5. Devices and switching elements of control circuits. Electrical emergency stop devices with mechanical locking function

GOST IEC 61020-1-2016: Electromechanical switches for use in electrical and electronic equipment. Part 1. Generic specification

GOST IEC 61037-2011: Electricity metering. Tariff and load control. Particular requirements for electronic ripple control receivers

GOST IEC 61038-2011: Electricity metering. Tariff and load control. Particular requirements for time switches

GOST IEC 61204-2013: Low-voltage d.c. power supply sources Operating characteristics

GOST IEC 61243-3-2014: Live working. Voltage detectors. Part 3: Two-pole low-voltage type

GOST IEC 61496-1-2016: Safety of machinery. Electro-sensitive protective equipment. Part 1. General requirements and tests

GOST IEC 61558-1-2012: Safety of power transformers, power supplies, reactors and similar products. Part 1. General requirements and tests

GOST IEC 61810-7-2013: Electromechanical elementary relays. Part 7. Test and measurement procedures

GOST IEC 61812-1-2013: Specified time relays for industrial use. Part 1. Requirements and tests

GOST IEC 62052-21-2014: Electricity metering equipment (a.c.). General requirements, tests and test conditions. Part 21. Tariff and load control equipment

GOST ISO 9919-2011: Medical electrical equipment. Particular requirements for the basic safety and essential performance of pulse oximeters

GOST R 42.3.03-2015: Civil defence. Technical means of public notification. Test methods

GOST R 42.3.04-2015: Civil defence. Technical means of communication. Test methods

GOST R 50030.5.1-2005: Low-voltage switchgear and controlgear. Part 5. Control circuit devices and switching elements. Section 1. Electromechanical control circuit devices

GOST R 50030.5.5-2011: Low-voltage switchgear and control gear. Part 5-5. Control circuit devices and switching elements. Electrical emergency stop devices with mechanical latching function

GOST R 50030.5.8-2013: Low-voltage switchgear and control gear. Part 5-8. Control circuit devices and switching elements. Three-position enabling switches

GOST R 50319-92: Electromechanical switches for use in electronic equipment. Sectional specification for in-line package switches

GOST R 50320-92: Electromechanical switches for use in electronic equipment. Sectional specification for pushbutton switches

GOST R 50321-92: Electromechanical switches for use in electronic equipment. Sectional specification for sensitive switches

GOST R 50679-94: Photography. Cameras. Automatic controls of exposure

GOST R 50736-95: Antenna-feeder devices of systems of land mobile radiocommunication. Types, basic parameters, technical requirements and methods of measurements

GOST R 50775-95: Alarm systems. Part 1. General requirements. Section 1. General

GOST R 50777-95: Alarm systems. Part 2. Requirements for intruder alarm systems. Section 6. Passive infra-red detectors for use in buildings and open sites

GOST R 51053-2012: Locks high security. Requirements and tests for according to their resistance to unauthorized opening

GOST R 51089-97: Control, indicating receiving and operating equipment. General technical requirements. Test methods

GOST R 51186-98: Alarm sonic passive glass break detectors for use in buildings. General technical requirements and methods of tests

GOST R 51330.14-99: Electrical apparatus for explosive gas atmospheres. Part 15. N type protection.

GOST R 51330.8-99: Explosionproof electrical apparatus. Part 7. Type e protection.

GOST R 51841-2001: Programmable controllers. General technical requirements and test methods

GOST R 52161.2.25-2007: Safety of household and similar electrical appliances. Part 2.25. Particular requirements for microwave ovens, including combination microwave ovens

GOST R 52161.2.29-2007: Safety of household and similar electrical appliances. Part 2.29. Particular requirements for battery chargers

GOST R 52219-2004: Automatic control systems for gas burners and gas burning appliances. General technical requirements and test methods

GOST R 52320-2005: Electricity metering equipment (а.с). General requirements. Tests and test conditions. Part 11. Meters for electric energy

GOST R 52350.7-2005: Electrical apparatus for explosive gas atmospheres. Part 7. Increased safety 'e'

GOST R 52434-2005: Active infra-red detectors. General technical requirements and test methods

GOST R 52435-2005: Technical means of intruder alarm systems. Classification. General technical requirements and test methods

GOST R 52650-2006: Combined microwave infra-red intrusion detectors for rooms. General technical requirements and test methods

GOST R 52651-2006: Microwave intrusion detectors for perimeters. General technical requirements and test methods

GOST R 52651-2022: Linear radio-wave intrusion detectors for perimeters. General technical requirements and test methods

GOST R 52933-2008: Capacitance intrusion detectors for rooms. General technical requirements and test methods

GOST R 53325-2009: Fire techniques. Means of fire automatics. The general technical requirements. Test methods

GOST R 53325-2012: Fire techniques. Means of fire automatics. General technical requirements and test methods

GOST R 53560-2009: Intruder alarm systems. Power supply units. Classification. General technical requirements. Test methods

GOST R 53702-2009: Alarms guarding surface vibration detectors for blocking of structures and safes. General technical requirements and test methods

GOST R 53705-2009: Complex security systems. Stationary metal detectors for apartments. General technical requirements. Test methods

GOST R 54126-2010: Warning devices for intruder alarm systems. Classification. General technical requirements and test methods

GOST R 54364-2011: Low-voltage power supply devices, d.c. output. Performance characteristics

GOST R 54434-2011: Railway application. Rolling stock equipment. Shock and vibration

GOST R 54455-2011: Alarm systems. Environmental test methods

GOST R 54765-2011: Escalators and moving walks. Safety requirements for construction and installation

GOST R 54832-2011: Alarms are guarding point magnetic contact. General requirements and test methods

GOST R 54958-2012: Railway telecommunications. Safety requirement control methods

GOST R 55149-2012: Fire techniques. Individual fire alarm devices. General technical requirements and test methods

GOST R 55150-2012: Combined passive infrared ultrasonic intrusion detectors for use in buildings. General technical requirements and test methods

GOST R 55207-2012: Gas/air controls for gas burners and gas burning appliances. Part 2. Electronic types

GOST R 56292-2014: Block-signalling cables. General specification

GOST R 57229-2016: Photovoltaic systems. Solar trackers. General specifications

GOST R 57552-2017: Fire techniques. Multi-criteria fire detectors. General technical requirements and test methods

GOST R 57903-2017: Photovoltaic systems. Stand-alone pumping systems for water supply. Performance determination. Selection and verification

GOST R 58006-2017: Counter of the number of opening for safes, value repository, wrapping doors. Technical requirements and test methods

GOST R 70302-2022: Low voltage systems. Cable systems. Optical couplings. General requirements

GOST R IEC 1007-96: Transformers and inductors for use in electronic and telecommunication equipment. Measuring methods and test procedures

GOST R IEC 127-6-99: Miniature fuses. Part 6. Fuse-holders for miniature cartridge fuse-links

GOST R IEC 491-95: Safety requirements for electronic flash apparatus for photographic purposes

GOST R IEC 60065-2005: Audio, video and similar electronic apparatus. Safety requirements

GOST R IEC 60079-7-2012: Explosive atmospheres. Part 7. Equipment. Protection by increased safety «e»

GOST R IEC 60086-4-2009: Primary batteries. Part 4. Safety of lithium batteries

GOST R IEC 60086-5-2009: Primary batteries. Part 5. Safety of batteries with aqueous electrolyte

GOST R IEC 60122-1-2009: Quartz crystal units of assessed quality. Part 1. Generic specification

GOST R IEC 60252-1-2005: AC motor capacitors. Part 1. General. Performance, testing and rating. Safety requirements. Guide for installation and operation

GOST R IEC 60384-1-2003: Fixed capacitors for use in electronic equipment. Part 1. General specifications

GOST R IEC 60945-2007: Maritime navigation and radiocommunication equipment and systems. General requirements. Methods of testing and required test results

GOST R IEC 61037-2001: Electricity metering. Tariff and load control. Particular requirements for electronic ripple control receivers

GOST R IEC 61038-2001: Electricity metering. Tariff and load control. Particular requirements for time switches

GOST R IEC 61587-1-2013: Mechanical structures for electronic equipment. Tests for IEC 60917 and IEC 60297. Part 1. Climatic, mechanical tests and safety aspects for cabinets, racks, subracks and chassis

GOST R IEC 61587-2-2015: Mechanical structures for electronic equipment. Tests for IEC 60917 and IEC 60297. Part 2. Seismic tests for cabinets

GOST R IEC 61959-2007: Secondary cells and batteries containing alkaline or other non-acid electrolytes. Mechanical tests for sealed portable secondary cells and batteries

GOST R IEC 61969-1-2013: Mechanical structures for electronic equipment. Outdoor enclosures. Design guidelines

GOST R IEC 61969-3-2015: Mechanical structures for electronic equipment. Outdoor enclosures. Part 3. The environmental demands concern, testing and safety

GOST R IEC 62281-2007: Safety of primary and secondary lithium cells and batteries during transport

GOST R ISO 10651.3-99: Lung ventilators. Part 3. Particular requirements for emergency and transport ventilators

NPB 58-97: Address fire alarm systems. General technical requirements. Test methods

NPB 65-97: Optical and Electronic Optical detectors. General Technical Requirement. Testing Procedure

NPB 66-97: Self-contained fire detectors. General technical requirements. Test methods

NPB 72-98: Flame detectors. General Technical Requirements. Test Methods

NPB 76-98: Fire detectors. General technical requirements. Test methods

NPB 77-98: Fire alarm systems and evacuation management. General technical requirements and test methods

OST 32.146-2000: Devices of railway automation, telemechanics and telecommunications. General specification requirements

PNST 49-2015: Hydraulic turbines governing system. Guide to specification

ST CKBA 125-2020: Pipe fittings. Types of control and testing

ST RK GOST R 52320-2009: AC electricity metering equipment. General requirements for testing and testing conditions. Part 11. Meters for electric energy

STB GOST R 52320-2007: Equipment for measurement of alternating current of electrical power. General requirements. Tests and test conditions. Part 11. Electrical power recorders

STB IEC 60065-2004: Audio, video and similar electronic equipment. Safety requirements

STB IEC 60838-2-2-2010: Lamp cartridges of different types. Part 2-2. Additional requirements. Connecting devices for modules with light-emitting diodes

STB IEC 61131-2-2010: Programmable controllers. Part 2. Requirements to equipment and tests

STB IEC 61558-1-2007: Safety of power transformers, power sources, electric reactors and similar appliances. Part 1. General requirements and test methods

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Heating, Ventilation and Air Conditioning (HVAC)
Language: English
Price: $430.00
imgalt
Technical regulations of Customs Union. On safety of rolling stock
Language: English
Price: $181.30
imgalt
Goat whole drinking milk. Specifications
Language: English
Price: $168.00
imgalt
Loads and impacts
Language: English
Price: $306.00
imgalt
Seamless steel pipes for steam boilers and pipelines
Language: English
Price: $581.17
imgalt
Conformity assessment system in the field of atomic energy use. Conformity assessment in the form of control. Unified techniques. Capillary control
Language: English
Price: $226.00
imgalt
Conformity assessment system in the field of atomic energy use. Conformity assessment in the form of control. Unified techniques. Visual and measuring control
Language: English
Price: $348.00
imgalt
Pipe fittings. Passport. Rules for development and design
Language: English
Price: $254.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!