imgalt

SNiP 2.04.12-86

СНиП 2.04.12-86

Steel pipelines strength analysis

Расчет на прочность стальных трубопроводов

Status: Not effective. Updated version of SP 33.13330.2012 Strength calculation for steel pipelines

These standards apply to steel pipelines for various purposes with a nominal diameter of up to 1,400 mm inclusive, intended for the transportation of liquid and gaseous media with pressures up to 10 MPa (100 kgf

Настоящие нормы распространяются на стальные трубопроводы различного назначения условным диаметром до 1400 мм включ., предназначенные для транспортирования жидких и газообразных сред давлением до 10 МПа (100 кгс/см2) и температурой от минус 70 до плюс 450 град. С включительно, и устанавливают требования к расчету их на прочность

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Gosstroy of the USSR (State Committee of the Council of Ministers of the USSR for Construction), 4/7/1986

SKU: RUSS17787

Price: $279.00

imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Regulations » Documents System of normative documents in construction » 3. Normative documents on urban planning, buildings and constructions » K.34 Main and field pipelines »

Welding regulations » Welding work »

Welding regulations » Main materials »

Welding regulations » Pipelines »

Welding regulations » Metal structures »

Welding regulations » Welding materials »

Welding regulations » Admission Testing »

Welding regulations » Documentation »

Welding regulations » Welding work » Dusting »

Welding regulations » Main materials » Steel, cast iron »

Welding regulations » Welding materials » Fluxes »

Welding regulations » Welding materials » Gases »

ISO classifier » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.040 Pipelines and their components » 23.040.10 Cast iron and steel pipes »


As a Replacement Of:

SN 373-67: Instructions on the calculation of steel pipelines for various purposes

The Document References:

GOST 10705-80: Electrically welded steel tubes. Specifications

GOST 10706-76: Electrically welded steel line-weld tubes. Technical requirements

GOST 10707-80: Steel cold shaped electrically welded tubes technical conditions

GOST 11068-81: Electric-welded pipes from corrosion-resistant steel

GOST 12.1.005-88: General sanitary requirements for working zone air

GOST 12.1.007-76: Noxious substances. Classification and general safety requirements

GOST 17374-83: Seamless welded steel pipeline components for Pn £ 10 MPa (£ 100 kgf/cm2). Types and main parameters

GOST 17380-83: Seamless welded steel pipeline components for Pn £ 10 MPa (£ 100 kgf/cm2). Specifications

GOST 20295-85: Welded steel pipes for gas and oil pipelines. Technical specifications

GOST 550-75: Seamless steel tubes for petroleum processing and petrochemical industry. Specifications

GOST 8696-74: General-purpose electrically welded spiral seam steel pipes. Specifications

GOST 8731-74: Seamless hot-deformed steel pipes. Specifications

GOST 8732-78: Seamless hot-deformed steel pipes. Range of sizes

GOST 8733-74: Cold-formed and heat-formed seamless steel pipes. Technical requirements

GOST 8734-75: Seamless steel tubes cold deformed. Range

GOST 9940-81: Seamless hot-deformed tubes made from corrosion-resistant steel

GOST 9941-81: Seamless cold- and warm-deformed tubes made from corrosion-resistant steel

PB 03-75-94: Rules for arrangement and safe operation of steam and hot water piping

SN 373-67: Instructions on the calculation of steel pipelines for various purposes

The Document is Referenced By:

GOST R 53672-2009: Pipeline valves. General safety requirements

GOST R 56028-2014: Fire engineering. Automatic gas-powder fire extinguishing systems. General technical requirements. Test methods

GOST R 70519-2022: Tailings ponds of hydrometallurgical plants of uranium mining enterprises. Design standards

Letter 48836-DV/08: On current codes of practice that prohibit the use of used pipes

MDS 11-4.99: Methodical recommendations for the examining of feasibility studies (of the projects) for construction of production enterprises, buildings and structures

MDS 40-2.2000: Design Manual for Self-Contained Utility Systems (Water Supply, Sewerage, Piped Heat Supply and Ventilation, Gas Supply, and Electricity Supply Systems) for Single-Dwelling and Multiple-Dwelling Residential Occupancies

MDS 80-8.2000: Recommended Practice for Development of Technical Part of Bidding Documentation and Bidder Offer

Order 1112: On Amending Order No. 687 of the Federal Agency for Technical Regulation and Metrology of April 2, 2020

Order 1653: On amending the order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687

Order 2079: List of documents in the field of standardization, the application of which on a voluntary basis to ensure compliance with the requirements of the Federal Law of December 30, 2009 № 384-FZ "Technical Regulations on the Safety of Buildings and Structures

RD 03-141-97: On the approval and put into operation of instructional guidelines for the organization of supervision for maintenance of safe operation of hydraulic structures (hs) on enterprises and objects controlled by gosgortekhnadzor authorities

RD 03-29-93: Instructional Guidelines For Engineering Certification of Steam and Hot-Water Boilers, Pressure Vessels, Steam and Hot-Water Pipelines

RD 12-331-99: Ordinance on Industrial Safety Conformity Assessment at Gas Supply Facilities

RD 12-411-01: Guidelines for Operating Condition Diagnostics of Underground Steel Gas Lines

RD 153-34.1-30.106-00: Rules for technical operation of gas-handling facilities for gas-turbine and combined-cycle units at thermal power plants

RD 153-39.1-059-00: Technique of technical diagnostics of gas control points

RD 153-39.4-056-00: Main crude pipeline. Operations rules.

RD 34.30.106-95: Guidelines for the design of gas supply system with the addition of natural gas up to 0.5 MPa for gas turbine and combined cycle thermal power plants of RAO "UES of Russia", 08/24/95

RD 34.44.102-97: Guidance on the design of farms for liquid fuel for gas turbine and combined cycle power plants of TPP RAO "UES of Russia", 08/25/97

RM 4-266-93: Embedded devices in pipelines and equipment for installation of instruments and automation equipment. Guide to the choice of means of strengthening holes

RTM 38.001-94: Guidelines for the calculation of strength and vibration of technologically steel pipe.

SA-03-003-07: Stressing and vibration calculation of steel industrial pipelines.

SO 34.03.355-2005: Methodological instructions for ensuring fire and explosion safety during operating power gas turbine electric power units.

SP 33.13330.2012: Steel pipelines strength analysis

SP 41-104-2000: Design of independent heat supply sources

SP 42-102-2004: Design and construction of gas pipelines from metal pipes. To replace SP 42-102-96

SP 42-102-96: Code of practice for the use of steel pipes for the construction of gas supply systems

SP 66.13330.2011: Designing, building of pressure head networks of water supply and water removal with application of high-strength pipes from pigiron with spherical graphite

STP 09-04-02(001-STP/A): Calculations for the strength and vibration of steel process pipelines

TR 129-02: Technical recommendations for the construction of heat and water supply networks of steel pipes with polyurethane foam insulation in underground channel and ground gaskets

TSN 40-303-2003: Trenchless Installation of Utility Lines Using Microtunneling Complexes and Rehabilitation of Pipelines Using Special Equipment

TSN 41-304-2002: Apartment heating systems from gas-fired boilers. Smolensk region

TSN 41-310-2004: Apartment heating systems from gas-fired heat generators. Kursk region

TU 576431-009-01297858-99: Pipeline elements with polyurethane foam insulation. Technical conditions

VRD 39-1.8-055-2002: Standard design specification for compressor stations (CS), booster compressor stations (BCS) and compressor stations of underground gas storage facilities (CS UGSF)

VSN 07/02/34 Russian Defense Ministry: Design of fuel depots of the Ministry of Defense of the Russian Federation

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English
Price: $745.00
imgalt
Unified system for design documentation. Types and sets of design documentation
Language: English
Price: $139.00
imgalt
Loads and impacts
Language: English
Price: $306.00
imgalt
High strength rolled steel. General specification
Language: English
Price: $289.00
imgalt
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English
Price: $349.00
imgalt
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English
Price: $414.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!