SNiP 31-03-2001
СНиП 31-03-2001
|
|
Production buildings
Производственные здания
Status: The document is not up to date. Updated version of SP 56.13330.2011 Production Buildings
Standards should be observed at all stages of building and operation of buildings and premises of the functional fire hazard class F5.1 (according to SNiP 21-01): production buildings, laboratory buildings, production and laboratory facilities and workshops, including those built into buildings of other functional fire hazards . The standards do not apply to buildings and premises for the production and storage of explosives and means of blasting, military purposes, underground structures, underground, mining
Нормы должны соблюдаться на всех этапах создания и эксплуатации зданий и помещений класса функциональной пожарной опасности Ф5.1 (по СНиП 21-01): производственные здания, лабораторные здания, производственные и лабораторные помещения и мастерские, в том числе встроенные в здания другой функциональной пожарной опасности. Нормы не распространяются на здания и помещения для производства и хранения взрывчатых веществ и средств взрывания, военного назначения, подземные сооружения метрополитенов, горных выработок
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstroy of Russia,
3/19/2001
SKU: RUSS17790
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
3. Normative documents on urban planning, buildings and constructions »
k.31 Residential, public and industrial buildings and structures »
Technical Supervision »
Section I. Technological, construction, energy supervision and environmental protection regarding limitation of negative anthropogenic impact »
IV. Regulatory legal acts and regulations »
4. Security of capital construction objects »
4.1. Federal State Construction Supervision »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.040 Construction »
91.040.20 Commercial and industrial buildings »
The Document References:
GOST 12.1.033-81: Occupational safety standards system. Fire safety. Terms and definitions.
GOST 12.4.026-76: Signal colors and safety signs
GOST 14202-69: Pipe-lines of industrial plants. Identification coloring, safety signs and marking screens
GOST 25957-83: Mobile buildings and constructions. Classification. Terms and definitions
NPB 104-95: Design of Public Fire Warning Systems in Buildings and Structures
NPB 105-95: Determination of Rooms and Buildings Categories on Explosion and Fire Hazard
NPB 110-96: The list of buildings, constructions, rooms and equipment subject to protection by automatic extinguishing and fire detection installation
NPB 110-99: The list of buildings, constructions, rooms and equipment subject to protection by automatic extinguishing units and automatic fire alarm
SNiP 31-04-2001: Storage buildings
ST SEV 383-87: Fire safety in construction. Terms and Definitions
The Document is Referenced By:
A231: Requirements for the construction part of working drawings of electrical rooms and cable structures of industrial enterprises
GOST 31829-2012: Ozonization equipment. Safety requirements
GOST 34914-2022: Windows for industrial buildings. General technical conditions
GOST R 53523-2009: Public catering. General requirements for prefabricate enterprises
GOST R 55004-2012: Renewable power engineering. Geothermal power plants. Base safety requirements
GOST R 55260.4.1-2013: Hydro power plants. Part 4-1. Hydroelectric power plants. The technological part hydroelectric power plants and pumped storage plants. General specifications
GOST R 70341-2022: Roofing works. Installation of roofs with a waterproofing layer of bituminous roll materials. Rules and control of work performance
GOST R 70343-2022: Roofing works. Installation of roofs with a waterproofing layer of mastic materials. Rules and control of work performance
GOST R 70517-2022: Hydrometallurgical plants of uranium mining enterprises. Norms of technological design
GOST R 70567-2022: Land reclamation systems and structures. Pumping stations on polder systems. Design standards
GOST R 8.932-2017: State system for ensuring the uniformity of measurements. Requirement to methodologies (to the methods) of measuring in area of uses of nuclear-power. Substantive provisions
M788-1076: Fire Safety Design Manual for Electrical Rooms and Cable Structures Within Industrial Occupancies
MDK 11-01.2002: Recommended Practice for Procedure for Burial and Cemetery Maintenance in the Russian Federation
MDS 12-11.2002: Procedures Manual for SNIP 12-03-2001 "Occupational Safety and Health in Construction. Part 1: General Requirements" for Occupational Safety and Health Training and Testing of Supervisors and Specialists in Construction
MDS 12-27.2006: Methodological manual for conducting labor protection training for executives and specialists of construction organizations
MDS 13-20.2004: Comprehensive methods for the inspection and energy audit of reconstructed buildings. Design Guide
MDS 31-10.2004: Recommendations on the planning and maintenance of buildings, structures and complexes for funeral purposes
MDS 31-13.2007: Design guidelines for the safety and comfort of industrial buildings
MDS 31-8.2002: Recommended Practice for the Design and Installation of Skylights for Natural Illumination of Rooms
MDS 35-11.2004: Development of environment for work activity of low-mobile groups of people at industrial enterprises
MDS 55-1.2005: Walls with insulation from expanded polystyrene and mineral wool boards with a finishing layer of thin-layer plaster. Materials for design and working drawings of nodes
MGSN 4.19-2005: Temporary norms and standards for design of multifunctional high-rise buildings and buildings complexes in Moscow. Part 2. (Part 1 is sold separately as MGSN 4.19-05)
MGSN 5.02-99: Design of Urban Bridge Structures
MI 3342-11: Recommendation. GSE. Requirements for testing laboratories that monitor the quality of oil
MRR 3.2.05.04-07: Collection of basic prices for work on the inspection and monitoring of the technical condition of building structures and engineering equipment of buildings and structures
MRR 3.2.05.05-09: The collection of basic prices for work on the inspection and monitoring of the technical condition of building structures and engineering equipment of buildings and structures, carried out with the assistance of the Moscow budget funds
MRR 3.2.05.06-12: The collection of basic prices for survey and monitoring of the technical condition of building structures and engineering equipment of buildings and structures, including metro facilities that fall into the zone of influence of construction sites, carrie
MRR 3.2.06.06-06: Collected volume of base prices for construction design works in the city of Moscow
MRR 3.2.06.07-10: Collection of base prices for design work for construction, carried out with the involvement of the budget of the city of Moscow
MRR 3.2.57-09: The collection of basic prices for design work for the construction of mechanized garages such as "bookcase", carried out with the involvement of the budget of the city of Moscow
NTP 10-12976-2000*: Norms of technological design of enterprises of the alcohol industry
NTP 10-12977-2000: Standards of technological design of enterprises of the alcoholic beverage industry
NTP-APK 1.10.04.003-03: Standards for technological design of equestrian complexes
NTP-APK 1.10.05.001-01: Engineering Design Standards for Poultry Raising Facilities
NTP-APK 1.10.07.001-02: Engineering Design Standards for Veterinary Facilities for Livestock Raising, Fur-Farming, Poultry-Raising Facilities and Farms
NTP-APK 1.10.07.002-02: Engineering Design Standards for Veterinary Facilities for Cities and Other Populated Areas
NTP-APK 1.10.07.003-02: Engineering Design Standards for Animal Artificial Insemination Stations
NTP-APK 1.10.10.001-02: Engineering Design Standards for Grain Seed Companies and Small-Capacity Grain Processing Facilities
NTP-APK 1.10.14.001-01: Standards for technological design of astrakhan preprocessing centers
NTP-APK 1.10.17.001-03: Standards for technological design of bases and warehouses for general-purpose enterprises for resource provision
NTP-APK 1.20.02.001-04: Standards for technological design of small confectionery production enterprises
NTP-APK 1.20.11.001-04: Standards of technological design of enterprises of the yeast industry
ONTP 05-95: Sectoral norms of technological design of enterprises in the automotive industry. Metal plating workshops
Order 1112: On Amending Order No. 687 of the Federal Agency for Technical Regulation and Metrology of April 2, 2020
Order 1653: On amending the order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687
Order 2079: List of documents in the field of standardization, the application of which on a voluntary basis to ensure compliance with the requirements of the Federal Law of December 30, 2009 № 384-FZ "Technical Regulations on the Safety of Buildings and Structures
OSN-APK 2.10.14.001-04: Standards for the design of administrative, household buildings and premises for livestock, animal and poultry farms and other agricultural facilities
OSN-APK 2.10.22.001-04: Instructions for the use of local insulation materials in the construction of livestock buildings
OST 26.260.18-2004: Process modules for oil and gas industry. General technical specifications
OST 92-9440-81: Conducting lacquer coating. Technical requirements and typical technological processes.
PB 11-401-01: Safety regulations for gas-handling facilities of metallurgic and coke-chemical industries and enterprises
POT R M-027-2003: Intersectoral rules on labor protection in road transport
POT R O 13153-ZhDRM-946-03: Industry rules on labor protection during factory repair of locomotives and freight cars
POT R O-001-2002: Rules on labor protection for printing organizations
POT R O-13153-TsSh-877-02: Industry rules for labor protection during maintenance and repair of signaling, centralization and blocking devices on federal railway transport
POT R O-32-CV-400-96: Labor protection rules for the maintenance and repair of freight cars and refrigerated rolling stock
POT RO-13153-TsL-923-02: Industry rules for labor protection in the passenger sector of the federal railway transport
POT RO-13153-TsM-933-03: Industry rules for labor protection in the economy of freight and commercial work on the federal railway transport
POT RZhD 4100612-CT-613-2015: Temporary rules on labor protection during the operation of prototypes of the TEM19 gas locomotive and the GT1h gas turbine locomotive
POT RZhD 4100612-CTR-062-2015: Temporary rules on labor protection during maintenance and current repair of prototypes of the TEM19 gas locomotive and the GT1h gas turbine locomotive
POT RZhD-4100612-TsT-025-2012: Rules for labor protection during operation of locomotives of Russian Railways
RD 32-CSR-110/34-03: Guidance document. Labor protection during the operation of buildings and structures and the repair and construction work at railway facilities
RD-APK 1.10.01.02-10: Guidelines for technological design of farms and cattle complexes
RD-APK 1.10.01.03-12: Guidelines for the technological design of farms and cattle farms (farms)
RD-APK 1.10.03.01-11: Guidelines for technological design of goat farms and complexes
RD-APK 1.10.03.02-12: Guidelines for the technological design of sheep facilities
RD-APK 1.10.07.01-12: Methodical recommendations on the technological design of veterinary facilities for livestock, animal, poultry and peasant (farmer) farms
RD-APK 1.10.07.06-08: Guidelines for the technological design of veterinary and sanitary utilization plants
Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope
RMG 128-2013: State system for ensuring the uniformity of measurements. Requirements for the creation of laboratories performing tests and measurements
RMG 94-2009: State system for ensuring the uniformity of measurements. Test laboratories performing of the quality control of oil at acceptance operations. Basic requirements
SNiP 12-03-2001: Labor safety in construction industry
SNiP 31-04-2001: Storage buildings
SNiP 31-06-2009: Public buildings and constructions
SNiP 32-02-2003: Subways
SNiP 35-01-2001: Buildings accessibility for disabled population
SNiP 41-01-2003: Heating, Ventilation and Air Conditioning (HVAC)
SNiP 42-01-2002: State committee of Russian Federation for construction and residential-utility complex (GOSSTROY OF Russia)
SO 002-02495342-2005: Roofs of buildings and structures. Design and construction. Standard of organization
SO 34.49.505-2003: Regulations for fire retardant coating for building constructions of buildings and facilities of power engineering enterprises
SP 118.13330.2011: Public buildings and works
SP 120.13330.2011: Subways
SP 31-112-2007: Athletic and sports halls. Part 3: Indoor ice arenas
SP 35-104-2001: Facilities and buildings with places of work for people with disabilities
SP 56.13330.2011: Industrial buildings
SP 98.13330.2012: Tram and trolleybus lines
TSN 31-323-2002: Underground constructions. In mining workings in the permafrost area
TSN 41-304-2002: Apartment heating systems from gas-fired boilers. Smolensk region
TSN 41-310-2004: Apartment heating systems from gas-fired heat generators. Kursk region
VNP-10041-2002: Departmental norms and rules for creating coastal fishing enterprises. Treatment facilities
VNTP 06-91: Departmental norms for the technological design of cement plants
VRD 39-1.8-055-2002: Standard design specification for compressor stations (CS), booster compressor stations (BCS) and compressor stations of underground gas storage facilities (CS UGSF)
VSN 07/02/34 Russian Defense Ministry: Design of fuel depots of the Ministry of Defense of the Russian Federation
VSN 13-2002: Instructions for the design of fire and explosion hazardous production of alcohol, alcoholic beverage and brandy enterprises of the food industry
|
Customers Who Viewed This Item Also Viewed:
 |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Unified system for design documentation. Types and sets of design documentation
Language: English |
Loads and impacts
Language: English |
High strength rolled steel. General specification
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
