SNiP II-26-76
СНиП II-26-76
|
|
Roofing
Kровли
Status: The document is not up to date. The updated version of SP 17.13330.2011 Roofs is in force
Standards must be observed when designing roofs made of rolled, mastic materials and asbestos-cement corrugated sheets for buildings and structures for various purposes.
Нормы необходимо соблюдать при проектировании кровель из рулонных, мастичных материалов и из асбестоцементных волнистых листов для зданий и сооружений различного назначения
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstroy of the USSR (State Committee of the Council of Ministers of the USSR for Construction),
12/31/1976
SKU: RUSS17791
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
3. Normative documents on urban planning, buildings and constructions »
k.31 Residential, public and industrial buildings and structures »
Technical Supervision »
Section I. Technological, construction, energy supervision and environmental protection regarding limitation of negative anthropogenic impact »
IV. Regulatory legal acts and regulations »
4. Security of capital construction objects »
4.1. Federal State Construction Supervision »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.060 Construction elements »
91.060.20 Roofs »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.120 Protection of buildings, inside and out »
91.120.30 Steam and water resistance »
As a Replacement Of:
SN 394-74: Instructions for the design of roll and mastic roofing of buildings and structures of industrial enterprises
The Document References:
GOST 10174-72: Polyurethane-foam doors and windows seal strips
GOST 10296-71: Insulation
GOST 10354-73: Polyethylene film
GOST 103-76: Hot-rolled steel strip. Dimensions
GOST 10832-74: Expanded pearlite sand and crushed stone
GOST 10834-64: Liquid, hydrophobizing GKZh-94
GOST 10923-76: Ruberoid. Specifications
GOST 10999-76: Roofing and waterproofing paper-based tar material. Specification
GOST 1144-70: Half-round head wood screws. Dimensions
GOST 12865-67: Expanded vermiculits.
GOST 15123-69: Simazine - 50% wetting powder
GOST 15588-70: Plates heat-insulating from polystyrene foam
GOST 15879-70: Glass ruberoid. Specifications
GOST 16136-70: Heat-insulating products of expanded perlite on bituminous binder
GOST 16233-77: Asbestos-cement corrugated sheets of unified profile and details for them
GOST 19345-73: Gravel
GOST 20430-75: Asbestos-cement wavy sheets of medium profile and parts for them
GOST 20916-75: Slabs heat-insulating of foam on the basis of resole phenol-formaldehyde resins
GOST 21500-76: Products of perlite-phosphor-gel, heat-insulating
GOST 2217-76: Connecting pressure heads for fire fighting equipment. Specification
GOST 2697-75: Roofing asphalt felt. Technical requirements
GOST 2871-75: Sodium fluoride, technical. Specification
GOST 2889-67: Bitumen roofing mastic (hot)
GOST 30244-94: Building materials. Methods for combustibility test
GOST 3580-67: Soot-based roofing mastic (hot)
GOST 378-76: Asbestos-cement corrugated sheets of ordinary prfile and details for them
GOST 4029-63: Round roofing felt nails. Construction and dimensions
GOST 4030-63: Roofing nails. Construction and dimensions
GOST 4795-68: Concrete for hydraulic engineering. Technical requirements
GOST 4800-59: Concrete for hydraulic engineering. Test methods for concrete
GOST 5631-70: Lacquer BT-577 and paint BT-177
GOST 5742-76: Cellular concrete thermoinsulating boards
GOST 7118-54: Continuously galvanized sheet steel
GOST 7313-75: Enamels ХВ-785 and lacquer XB-784. Specifications
GOST 7415-74: Bituminous asbestos paper
GOST 7623-75: Outdoor drainage pipes
GOST 7741-66: Slabs, reinforced, made from cellular concrete for coatings of industrial buildings. Technical requirements
GOST 8075-56: Thin roofing coated and pickled steel sheet. Range
GOST 8268-74: Gravel for construction work
GOST 8423-75: Asbestos-cement wavy sheets of strong profile and parts for them
GOST 87-66: Sodium silicofluoride technical
GOST 8928-70: Portland cement fiberboard plates
GOST 9573-72: Slabs and mats heat-insulated from mineral wool on synthetic binder
GOST 9759-71: Claydite gravel
GOST 9870-61: Zinc-coated nail wire for asbestos cement roofing
GOST R 51032-97: Building materials spread flame test method
SN 394-74: Instructions for the design of roll and mastic roofing of buildings and structures of industrial enterprises
TU 480-1-145-91: Perlite Thermal Insulating Slabs
The Document is Referenced By:
GOST 10923-93: Ruberoid. Specifications
GOST 15588-86: Polystyrene foam boards. Specifications
GOST 2889-80: Bitumen hot mastic for roofing. Technical requirements
Manual: Manual for impulse and low consumption fire extinguishing systems
Manual for SNiP 21-01-97: Fire Prevention
Manual for SNiP II-23-81*: Steel Structural Engineering Tutorial
Manual for SNiP II-23-81*: Manual on the design of steel structures of overhead power lines (VL) power transmission towers and outdoor switchgears (outdoor switchgear) of substations with voltages above 1 kV
Manual for SNiP II-23-81*: Strength Design Guide for Steel Structures
MDS 11-3.99: Recommended Practice for Conformity Assessment of Feasibility Studies (Projects) for Construction of Nonindustrial Facilities
MDS 11-4.99: Methodical recommendations for the examining of feasibility studies (of the projects) for construction of production enterprises, buildings and structures
MDS 12-23.2006: Temporary recommendations on the technology and organization of construction of multifunctional high-rise buildings and building complexes in Moscow
MDS 12-36.2007: HL Hutterer & Lechner GmbH (Austria) HL Hoods Roofing Guidelines
MDS 12-54.2010: Guidelines for use in roofs and waterproofing of polymer materials
MDS 13-20.2004: Comprehensive methods for the inspection and energy audit of reconstructed buildings. Design Guide
MDS 31-8.2002: Recommended Practice for the Design and Installation of Skylights for Natural Illumination of Rooms
MDS 80-8.2000: Recommended Practice for Development of Technical Part of Bidding Documentation and Bidder Offer
NPB 114-2002: Fire protection of nuclear power plants. Design standards
Order 1112: On Amending Order No. 687 of the Federal Agency for Technical Regulation and Metrology of April 2, 2020
Order 2079: List of documents in the field of standardization, the application of which on a voluntary basis to ensure compliance with the requirements of the Federal Law of December 30, 2009 № 384-FZ "Technical Regulations on the Safety of Buildings and Structures
OSN-APK 2.10.22.001-04: Instructions for the use of local insulation materials in the construction of livestock buildings
POT R O 97300-12-97: Labor protection regulations in the beer and non-alcoholic food industry
POT R O-97300-04-95: Rules for labor protection during storage and processing of fruits and vegetables
RD 153-34.0-21.601-98: Model Guidelines for Operation of Process Buildings and Structures of Electric Power Facilities. Part II, Sections 1, 2
RD 153-34.1-03.357-00: Recommended Practice for Improving Fire Safety of Roll Roofing on Main Buildings of In-Service Thermal Power Stations
RD 34.21.363-95: Procedural Guidelines for Inspection of Production Buildings and Structures at Thermal Power Plants Under Rehabilitation
RD EO 0007-93: Standard instruction manual for operation of industrial buildings and structures of nuclear power plants. Part 1. Organization of operation, repairs and maintenance. Volume 1, 2
Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope
RMD 31-03-2008 Sankt-Peterburg: Recommendations for the design of buildings of hotel enterprises, motels and campgrounds in St. Petersburg
SO 002-02495342-2005: Roofs of buildings and structures. Design and construction. Standard of organization
SO 153-34.03.357-2003: Recommendations for improving fire safety roofing coatings of the main buildings of operating thermal power plants
SP 31-105-2002: Design and construction of energy-efficient single-family houses with wooden frame
SP 31-116-2006: Design and installation of roofing of copper sheet
TR 113-01: Guide to Good Practice for Installation of Roofing Made of Built-up Roll Materials Using the Infrared Method
TR 12279-TI.2004: Thermal insulation products "Thermo" in enclosing structures of buildings and structures. Recommendations for use with technical solutions album
TR 143-03: Technical recommendations for the installation of lining layers of plastic films for pitched roofs
TR 163-04: Technical recommendations on the installation of pitched roofs using new materials (metal sheets and soft tile)
TR 183-07: Technical recommendations for roofing with the use of roll roofing material Shungomast
TR 187-07: Technical recommendations on roofing and waterproofing with the use of new waterproofing materials Filizol-Breeze and Filizol-NG
TR 198-08: Technical recommendations for flat roofing of residential, public and industrial buildings using rolled bitumen, bitumen-polymer and polymer materials
TR 94.02-99: Standard Procedure for Operational Quality Control of Construction, Installation, and Military Construction Work During Construction of Buildings and Structures. 02: Construction of Foundation Beds and Foundations
TR 94.07-99: Standard Procedure for Operational Quality Control of Construction, Installation, and Military Construction Work During Construction of Buildings and Structures. 07: Roofing Installation
TR 95.05-99: Standard Procedure for Construction and Installation Practices for Erection of Buildings and Structures. 05: Installation of Roll and Tile Roofing
TSN 20-303-2006: Protection of building structures, buildings and structures from aggressive chemical and biological environmental influences. St. Petersburg
TSN 30-307-2002: Design Standards for Integrated Site Improvements and Amenities in the City of Moscow
VNTP 12-92 KD: Interim Engineering Design Standards for Facilities for Production of Canned Foods for Child Nutrition
VNTP-88: Departmental norms of technological design of washing and steaming stations
VSN 18-95: Guidelines for Using Polymer, Bitumen Polymer, and Roll Waterproofing Materials for Installation of New Roofing and Repair of Existing Roofing of Residential, Public, and Factory and Industrial Occupancies
VSN 197-83: Guidelines for the Installation of Butadiene Polymer Roll Roofing for Residential Occupancies of Series П 3/17
VSN 37-96: Guidelines for Installation of Foundations on a Natural Bed for Construction of High-Rise Residential Occupancies
VSN 59-97: Guidelines for Installation of Shaped Roofing Products on Roofs
VSN 61-89(r): Rehabilitation and Renovation of Residential Occupancies. Design Standards
VSN 76-78/Minpromstroj SSSR: Instructions for the preparation and use of bitumen-free mastics for gluing roll materials (MB-X-75)
|
Customers Who Viewed This Item Also Viewed:
 |
Dependability in technics. Dependability management. Analysis techniques for reliability. General principles
Language: English |
Tobacco and tobacco product. Determination of phosphor organic pesticides. Thin layer chromatographic method
Language: English |
Tobacco and tobacco product. Determination of chloro-organic pesticides. Thin layer chromatographic method
Language: English |
Oil. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.