GOST 24244-80
ГОСТ 24244-80
|
|
Cold-rolled soft thin sheet steel for enameled utensils
Прокат тонколистовой холоднокатаный из малоуглеродистой стали для эмалированной посуды
Status: Not effective - Superseded. Registration information 996-st dated 11/14/2018 (official site of Rosstandart)
The standard applies to cold rolled sheets of low carbon steel with a thickness of 0.5 to 2.5 mm, intended for the manufacture of enamelware.
Стандарт распространяется на тонколистовой холоднокатаный прокат из низкоуглеродистой стали толщиной от 0,5 до 2,5 мм, предназначенный для изготовления эмалированной посуды.
Choose Language:
Format: Electronic (pdf/doc)
Approved: USSR State Committee for Standards,
6/18/1980
SKU: RUSS17839
The Product is Contained in the Following Classifiers:
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.12 Testing and control of products of metallurgical industry »
4.12.4 Iron and steel products »
ISO classifier »
77 METALLURGY »
77.140 Iron and steel products »
77.140.50 Steel sheet products and semi-finished products »
National standards »
77 METALLURGY »
77.140 Iron and steel products »
77.140.50 Steel sheet products and semi-finished products »
National Standards for KGS (State Standards Classification) »
Latest edition »
V Metals and metal products »
V3 Steel quality and high quality (quality stock) »
V33 Sheets and Stripes »
National Standards for OKSTU »
FINISHED ROLLED STEELS (INCLUDING BILL FOR EXPORT) »
Thin-sheet steel with a thickness of 1 to 1.8 mm »
The Document is Replaced With:
GOST 24244-2018: Сold rolled low carbon steel sheet for enameling. Specifications
The Document References:
GOST 1050-74: High-grade constructional carbon steel
GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications
GOST 10510-80: Metals. Erikson test method for sheets and strips extrusion
GOST 11701-84: Metals. Methods of tensile testing of thin sheets and strips
GOST 14019-80: Metals. Methods of bend tests
GOST 14192-77: Marking of cargoes
GOST 14192-96: Cargo marking
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 16523-70: Rolled sheets from carbon quality and ordinary steel for general purposes. Specification
GOST 16523-97: Rolled sheets from quality and ordinary carbon steel for general purposes. Specifications
GOST 19851-74: Ribbon from carbon cold-rolled cut steel
GOST 19904-74: Cold-rolled sheet. Range
GOST 19904-90: Cold-rolled steel sheets. Dimensions
GOST 22536.0-77: Carbon steel and unalloyed cast iron. General requirements for methods of analysis
GOST 22536.0-87: Carbon steel and unalloyed cast iron. General requirements for methods of analysis
GOST 22536.10-77: Carbon steel and unalloyed cast iron. Methods for determining aluminum content
GOST 22536.10-88: Carbon steel and unalloyed cast iron. Methods for determination of alluminium
GOST 22536.1-77: Carbon steel and unalloyed cast iron. Methods for determining the content of total carbon and graphite
GOST 22536.1-88: Carbon steel and unalloyed cast iron. Methods for determination of general carbon and graphite
GOST 22536.2-77: Carbon steel and unalloyed cast iron. Sulphur content determination method
GOST 22536.2-87: Carbon steel and unalloyed cast iron. Methods for the determination of sulfur
GOST 22536.3-77: Carbon steel and unalloyed cast iron. Method for the determination of phosphorus content
GOST 22536.3-88: Carbon steel and unalloyed cast iron. Methods for determination of phosphorus
GOST 22536.4-77: Carbon steel and unalloyed cast iron. Method for the determination of silicon content
GOST 22536.4-88: Carbon steel and unalloyed cast iron. Methods for determination of silicon
GOST 22536.5-77: Carbon steel and unalloyed cast iron. Methods for determination of content
GOST 22536.5-87: Carbon steel and unalloyed cast iron. Methods for determination of manganese
GOST 22536.6-77: Carbon steel and unalloyed cast iron. Method for determination of arsenic content
GOST 22536.6-88: Carbon steel and unalloyed cast iron. Methods for determination of arsenic
GOST 22536.7-77: Carbon steel and unalloyed cast iron. Methods for determination of chromium content
GOST 22536.7-88: Carbon steel and unalloyed cast iron. Methods for determination of chromium
GOST 22536.8-77: Carbon steel and unalloyed cast iron. Methods of the determination of capper content
GOST 22536.8-87: Carbon steel and unalloyed cast iron. Methods for determination of copper
GOST 22536.9-77: Carbon steel and unalloyed cast iron. Methods for determination of nickel content
GOST 22536.9-88: Carbon steel and unalloyed cast iron. Methods for determination of nickel
GOST 24405-80: Silicate enamels (frits). Specifications
GOST 2789-73: Surface roughness. Parameters and characteristics
GOST 3560-73: Sealing tepe
GOST 380-71: Common quality carbon steel. Grades
GOST 380-94: Normal quality carbon steel
GOST 515-77: Bitumized and tarred packaging paper
GOST 5639-82: Steel and alloys. Methods for detection and determination of grain size
GOST 5640-68: Steel. Metallographic method for determination of microstructure of sheets and bands
GOST 7564-73: Steel. General rules of samples, blanks and test pieces for mechanical and technological tests
GOST 7564-97: Rolled products general rules of samples, rough specimens and test pieces selection for mechanical and technological testing
GOST 7565-81: Iron, steel and alloys. Sampling for determination of chemical composition
GOST 7566-81: Rolled stock and products for further treatment
GOST 7566-94: Metal products
GOST 8828-75: Two-layer packaging paper. General specifications
GOST 8828-89: Base paper and two-layer waterproof packaging paper
GOST 9045-80: Low carbon cold-rolled quality steel sheets for cold stamping. Specifications
GOST 9045-93: Cold-rolled thin sheets of low-carbon steel for cold stamping. Specifications
The Document is Referenced By:
GOST 23695-79: Enamelled steel sanitary appliances. General technical requirements
GOST 24788-2001: Enameled steel kitchen utensils. General specifications
GOST 24788-2018: Enamelled steel kitchen utensils. General specifications
GOST 24788-81: Enameled steel kitchen utensils.
GOST 30466-98: Household kitchen appliances with external warmth supply. Safety requirements and test methods
GOST 34101-2017: Posuda stal'naya emalirovannaya dlya detej i podrostkov. Tehnicheskie usloviya
GOST R 52223-2004: Steel enamelled ovenware with anti-burn coating. Specifications
GOST R 54155-2010: Enamelled steel kitchen utensils for children and teenagers. Specifications
Customers Who Viewed This Item Also Viewed:
|
Limit dimension deviation from 0,1 to 10000 mm and surface shape and arrangement allowances, not specified on drawings.
Language: English |
Rules of development, coordination, approval and composition of technical and economic assessment for construction
Language: English |
Mineral fertilizers. Method for determination of dynamic strength and attrition
Language: English |
Diesel fuel EURO. Specifications
Language: English |
Inch thread with a profile angle of 55 degrees
Language: English |
Vessels and apparatus. Norms and methods of strength calculation. General requirements
Language: English |
Norms of structural design of nuclear power plants with reactors of different types
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.