GOST 30412-96
ГОСТ 30412-96
|
|
Road roads and airfields. Methods for measuring base irregularities and coatings
Дороги автомобильные и аэродромы. Методы измерений неровностей оснований и покрытий
Status: Not effective - Canceled in the Russian Federation. Registration information 370-st dated 05/22/2016 (the official website of Rosstandart); IUS 10-2016
The standard applies to methods for measuring surface irregularities and surfaces of roads, streets in cities and rural settlements, as well as airfields during the period of their construction and operation.
Стандарт распространяется на методы измерений неровностей поверхности оснований и покрытий автомобильных дорог, улиц в городах и сельских поселениях, а также аэродромов в период их строительства и эксплуатации
Choose Language:
Format: Electronic (pdf/doc)
Approved: Ministry of Construction of Russia,
8/5/1996
SKU: RUSS17857
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
3. Normative documents on urban planning, buildings and constructions »
K.32 Transport facilities »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
014/2011 TR CU. Road safety »
Regulations and standards (to TR TS 014/2011) »
ISO classifier »
93 CIVIL CONSTRUCTION »
93.080 Road construction »
93.080.20 Road construction materials »
National standards »
93 CIVIL CONSTRUCTION »
93.080 Road construction »
93.080.20 Road construction materials »
ISO classifier »
93 CIVIL CONSTRUCTION »
93.080 Road construction »
93.080.99 Road construction, other aspects »
National standards »
93 CIVIL CONSTRUCTION »
93.080 Road construction »
93.080.99 Road construction, other aspects »
ISO classifier »
93 CIVIL CONSTRUCTION »
93.120 Airport construction »
National standards »
93 CIVIL CONSTRUCTION »
93.120 Airport construction »
National Standards for KGS (State Standards Classification) »
Latest edition »
Zh Construction and building materials »
Zh8 Road, bridge and railway construction »
Zh81 Road construction »
The Document References:
GOST 10528-90: Geodetic levels
GOST 20993-75: Pneumatic tyres radial and diagonal for motor-cars. Basis parameters and dimensions
GOST 24555-81: The state system of testing the production. The procedure of verification of testing equipment. General principle
SNiP 3.06.03-85: Automobile roads
SNiP 32-03-96: Aerodromes
The Document is Referenced By:
GOST 32758-2014: Public roads. Temporary technical means of traffic management. Specifications and rules for use
GOST 32825-2014: Automobile roads of general use. Pavements. Methods of measurement of the geometric dimensions of damages
GOST 33025-2014: Automobile roads of general use. Rumble strips. Technical requirements
GOST 33101-2014: Automobile roads of general use. Road coating. Measuring flatness
GOST R 50597-2017: Automobile roads and streets. The requirements to the level of maintenance satisfied the traffic safety. Methods of testing
GOST R 52767-2007: Automobile roads of the general use. Road facilities. Methods for determination of parameters
GOST R 56925-2016: Automobile roads and airfields. Uneveness measurement methods for base courses and pavements
Manual: Manual for impulse and low consumption fire extinguishing systems
ODM 218.11.001-2015: Methodical recommendations about the accounting of increase in dynamic influence of loading in process of accumulation of roughnesses and to determination of coefficient of dynamism depending on a flatness indicator
ODM 218.2.017-2011: Guidelines Design, construction and operation of roads with low traffic
ODM 218.3.004-2010: Guidelines for the thermal profiling of asphalt concrete pavements
ODM 218.3.005-2010: Methods for Calculating Toll for Passage via Tollroads and Road Facilities. Procedure for Levy and Review of Toll- Determination of Consumer Demand
ODM 218.3.028-2013: Guidelines for the repair and maintenance of cement concrete pavements of roads
ODM 218.3.041-2014: Guidelines for the reinforcement of asphalt concrete pavement layers with steel nets
ODM 218.3.060-2015: Guidelines for the repair of pavements consisting of cement concrete pavements, covered with asphalt concrete pavements, on public roads
ODM 218.3.090-2017: Guidelines for assessing the economic efficiency, technology and quality of work when maintaining public roads with asphalt concrete pavement under compacted snow cover, taking into account operating conditions
ODM 218.4.005-2010: Recommendations for the safety of traffic on highways
ODM 218.6.027-2017: Guidelines for Traffic Control and Safety Barriers at Road Construction Sites
ODN 218.0.006-2002: Requirements on Diagnostics and Assessment of the Condition of Roads and Highways
ODN 218.3.039-2003: Reinforcement of Road and Highway Shoulders
Order 2079: List of documents in the field of standardization, the application of which on a voluntary basis to ensure compliance with the requirements of the Federal Law of December 30, 2009 № 384-FZ "Technical Regulations on the Safety of Buildings and Structures
SDA 24-2008: Rules for assessment (certification) of testing laboratories personnel
SNiP 32-03-96: Aerodromes
SP 121.13330.2012: Aerodromes
SP 312.1325800.2017: Internal roads of rural settlements. Service regulation
SP 34.13330.2012: Automobile roads. Updated living edition of SNIP 2.05.02-85
SP 78.13330.2012: Automobile roads
STB 1291-2007: Highways and streets. Requirements for the operational state, which is permissible under the road safety terms
STB 1538-2013: Technical means of traffic management. Bumps. General specifications
TR 134-03: Technical recommendations for the installation and commissioning of pavements, taking into account the requirements of international standards for evenness
VSP 02.01.32/Russian Defense Ministry: Rules for the production and acceptance of work in the construction of aerodromes of the Armed Forces of the Russian Federation
VSP 32-02-03 MO RF: Rules for the production and acceptance of work in the repair of rigid airfield pavements
Customers Who Viewed This Item Also Viewed:
|
Liquid lubricating and plastic materials. Method of test for lubricating properties on four ball machine
Language: English |
Armour clothes. Classification and general technical requirements
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Food products. Methods for detection and quantity determination of coliformes
Language: English |
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English |
Hotels design
Language: English |
Railroad rails. General specifications
Language: English |
Potassium chloride
Language: English |
Controllers acting without
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.