Status: Effective - Supersedes. The limitation of effectiveness has been lifted: Resolution of the State Standard No. 1434 of 10.21.92
The standard establishes methods of quality control and the scope of their application when detecting defects in welded joints of metals and alloys, made by welding methods given in GOST 19521-74.
Стандарт устанавливает методы контроля качества и область их применения при обнаружении дефектов сварных соединений металлов и сплавов, выполненных способами сварки, приведенными в ГОСТ 19521-74.
Format: Electronic (pdf/doc)
Page Count: 12
Approved: USSR State Committee for Standards,
The Product is Contained in the Following Classifiers:
Construction (Max) »
Other state standards used in construction »
25 Mechanical Engineering »
Welding regulations »
Welding work »
Welding regulations »
Welding staff »
Welding regulations »
Welding regulations »
Non-destructive control »
Welding regulations »
Heat treatment »
Welding regulations »
Welding regulations »
Welding work »
Welding regulations »
Welding materials »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
005/2011 TR CU. O packaging safety »
Norms and standards (to TR TS 005/2011) »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
038/2016 TR EAEU. About safety of rides »
Regulations and standards (to 038/2016 TR EAEC) »
ISO classifier »
25 MECHANICAL ENGINEERING »
25.160 Welding, brazing and hard soldering »
25.160.40 Welds and welding »
National standards »
25 MECHANICAL ENGINEERING »
25.160 Welding, brazing and hard soldering »
25.160.40 Welds and welding »
National Standards for KGS (State Standards Classification) »
Latest edition »
V Metals and metal products »
V0 General rules and regulations on metallurgy »
V09 Test methods. Packaging. Marking »
As a Replacement Of:
GOST 3242-69: Seams of welded connections. Methods of quality control
GOST 3248-46: Metals. Creep test method
The Document References:
GOST 14782-86: Nondestructive testing. Welded joints. Ultrasonic methods
GOST 18442-80: Non-destructive testing. Capillary methods. General requirements
GOST 19521-74: Welding of metals
GOST 20426-82: Radiation methods of defectoscopy
GOST 21104-75: Non-destructive testing. Ferrosonde method
GOST 21105-87: Non-destructive testing. Method of magnetic particle testing
GOST 7512-82: Nondestructive testing. Welded joints. Radiography method
The Document is Referenced By:
GOST 10512-78: Magnetic and electromagnetic separators. Specification
GOST 10580-74: Foundry equipment. General specifications
GOST 10674-82: Tank cars of 1520 mm gauge main-line railways. General specifications
GOST 10674-97: Tank Car of 1520 mm gauge mainline railways. General technical conditions
GOST 10935-97: Box-cars for 1520 mm gauge main line railways. General specifications
GOST 11004-84: Principal ventilation mine blowers
GOST 12367-85: Tube mills of grinding units. General technical specifications
GOST 12393-77: Fittings for overhead system of electric railways. General specifications
GOST 12893-2005: Single-seated, double-seated and cage control valves. General specifications
GOST 13524-68: Wheels with solid types for railless transport. Specifications
GOST 13531-74: Concrete placers for precast reinforced concrete factories
GOST 13547-2015: Pipeline valves. Butterfly wicket valves. General specifications
GOST 13716-73: Slinging arrangements for vessels and apparatus. Specifications
GOST 13950-91: Welded and folded steel barrels
GOST 13981-77: Forms for reinforced concrete pressure pipes made by vibrohydropressed method. Specifications
GOST 13981-87: Forms for reinforced concrete pressure pipes made by vibrohydropressed method. Specifications
GOST 14110-80: Reusable semirigid slings. Specifications
GOST 14110-97: Reusable semi rigid slings
GOST 14116-85: Vessels attaching rigs. Election lugs. Technical requirements
GOST 1561-75: Air reservoirs for railway car automatic brakes. Specifications
GOST 15850-84: Mine parachutes for cages
GOST 15851-84: Suspension devices for mine cages
GOST 15860-84: Steel welded cylinders for liquefied hydrocarbon gases at pressure up to 1.6 MPa.
GOST 16024-79: Cryogenic vessels. Specification
GOST 16140-77: Collapsible racks. Specifications
GOST 17366-80: Welded thick-walled steel barrels for chemical products
GOST 17441-84: Electrical contact connections. Acceptance and methods of tests
GOST 18103-84: Installations for manufacturing reinforced concrete three-dimensional elements of sanitary engineering cabins and lift shafts. Specifications
GOST 18104-81: Forms of steel for the manufacture of reinforced concrete centrifuged non-pressure pipes. Specification
GOST 18176-79: Furniture of packing cases. Specifications
GOST 18343-80: Pallets for bricks and hollow clay tiles
GOST 18896-73: Steel thick-walled drums for chemical products. Specifications
GOST 19330-2013: Masts (poles) for overhead contact line supports of railways. Specifications
GOST 19667-74: Special-purpose group container of gross mass 5,0 th for piece-goods
GOST 19668-74: Specific purpose container of gross mass 5 (7) t for dry bulk
GOST 19740-74: Vertical centrifugal pumps
GOST 19822-88: Industrial container. Specifications
GOST 2021-90: Ship's steel manholes. Specifications
GOST 20260-80: General-purpose containers
GOST 20426-82: Radiation methods of defectoscopy
GOST 20692-2003: Roller bits. Specifications
GOST 21028-75: Jigs for machining holes of moulding boxes and pattern plates. Specifications
GOST 21029-75: Aluminum barrels for chemical products
GOST 21133-87: Specialized box pallets for potatoes, vegetables, fruits, melons and gourds
GOST 21253-75: Automatic filling and metering-and-filling machines
GOST 21345-2005: Ball, lifting-plug and cylindrical cocks for nominal pressure at most PN 250. General specifications
GOST 21561-2017: Automobile tanks for hydrocarbon gas transportation at pressure up to 1,8 MPa. Technical requirements and test methods
GOST 21561-76: Automobile tanks for liquefied hydrocarbon gas transportation at pressure up to 1,8 MPa. General specifications
GOST 21807-76: Concrete mixture conveying buckets to 2 cub m volume. General specifications
GOST 22045-89: Overhead travelling single-beam cranes. Specifications
GOST 22130-2018: Steel piping details. Movable supports and hangers. Specifications
GOST 22130-86: Steel Pipeline Parts
Movable supports and suspensions
GOST 22133-86: Paint and varnish coatings of metal-cutting, press-forging, foundry and wood-working equipment
GOST 22584-88: Rope electric hoists. Specifications
GOST 22584-96: Electric rope hoists
GOST 22685-89: Moulds for making control specimens of concrete. Specifications
GOST 22845-2018: Lifts. Electric lifts. Installation, starting-up and adjustment works. The rules of the organization and manufacture of works, performance control and requiremens to results of works
GOST 22845-85: Electrical passenger and freight elevators
GOST 22956-83: Chain slings, mechanized, for securing cargo on vehicles. Specification
GOST 23074-85: Fertilizer placers for liquid organic fertilizers
GOST 23092-78: Sectional pallet box for topographical maps. Specifications
GOST 23200-78: Pleasure row boats and motor boats. General requirements when delivering for export
GOST 23476-79: Tramway and trolleybus overhead trolley wire supporting devices. General specifications
GOST 23987-80: Canal excavators. Test methods
GOST 24140-80: Pipe-line fastening parts. Cramps and clamps. Specifications
GOST 24145-80: Domestic containers for bread. General specifications
GOST 24258-88: Different types of scaffolding. General specifications
GOST 24599-87: Rope grab buckets for bulk cargoes
GOST 24752-81: Trolley bus bars of voltage up to 1 000 v
GOST 25088-81: Ship's doors. Specifications
GOST 25136-82: Pipe-line connections. Leak tightness test methods
GOST 25781-83: Steel moulds for reinforced concrete members. Specifications
GOST 26155-84: Barrels from corrosion-resistant steel
GOST 26256-84: Loading chutes for trash ducts of the floors of residential and public buildings. Specification
GOST 26257-84: Permanent containers for trash ducts of the floors of residential and public buildings. Specification
GOST 26294-84: Normal and high precision renewable jig bushes. Design and dimensions
GOST 26314-84: Stationary ship's ladders. Specifications
GOST 26314-98: Stationary ship's ladders. Specifications
GOST 26346-84: Lighting buses for the ac voltage up to 660 v
GOST 26582-85: Food (manufacturing) industry machines and equipment
GOST 26598-2018: Containers and means of packaging in building. General specifications
GOST 26598-85: Containers and means of packaging in building industry
GOST 26756-2016: Furniture for trade enterprises. General technical conditions
GOST 26756-85: Furniture for trade enterprises. General specifications
GOST 26804-2012: Metal road safety barriers. Specifications
GOST 27321-2018: Demountable tubular scaffold for constructional works. Specifications
GOST 27321-87: Demountable tubular scaffold for construction works. Specification.
GOST 2744-79: Line accessories. Acceptance rules and methods of tests
GOST 27584-88: Electric overhead travelling cranes and gantry cranes. General specifications
GOST 27614-2016: Cement carriers. General specifications
GOST 27614-93: Cement carriers
GOST 27636-95: Stone extraction and processing equipment
GOST 27962-88: Industrial equipment
GOST 29065-91: Tanks for milk
GOST 30176-95: Portable gas-turbine compressor stations of general purpose. General technical requirements
GOST 30243.1-97: Open hopper wagons of 1520 mm gauge for the loose materials. General specifications
GOST 30243.3-99: Covered hopper wagons for loose materials of 1520 mm gauge. General specifications
GOST 30245-2003: Steel bent closed welded square and rectangular section for building constructions. Specifications
GOST 30245-94: Roll-formed steel welded closed square or rectangular sections designed for use in steel structures
GOST 30430-96: Arc welding of structural cast irons. Requirements for technological process
GOST 30482-97: Electroslag welding of steels. Requirements for technological process
GOST 30540-97: The equipment for manufacture of products from cellular autoclaved concrete. General specifications and control methods
GOST 30646-99: Central conditioners of general use. General specifications.
GOST 30765-2001: Metal transport packagings. General specifications
GOST 30766-2001: Tins for chemical products. General specifications
GOST 30767-2002: Gas lift well use equipment. Safety requirements and test methods
GOST 30768-2001: Control head oil field equipment. Test methods
GOST 30776-2002: Oil field mobile pumping units. General specifications
GOST 31294-2005: Direct-acting safety valves. General specifications
GOST 31385-2008: Vertical cylindrical steel tanks for oil and oil-products. General specifications
GOST 31385-2016: Vertical cylindrical steel tanks for oil and oil-products. General specifications
GOST 31521-2012: Food рrocessing machinery. Сutting machines for meat. Specifications
GOST 31522-2012: Food processing machinery. Dough and pastry brakes. Specifications
GOST 31523-2012: Food processing machinery. Dough mixers. Specifications
GOST 31524-2012: Food processing machinery. Moulders. Specifications
GOST 31525-2012: Food processing machinery. Band saw machines. Specifications
GOST 31526-2012: Food processing machinery. Circular saw machines. Specifications
GOST 31527-2012: Food processing machinery. Intermediate provers. Specifications
GOST 31937-2011: Buildings and constructions. Rules of inspection and of the technical condition
GOST 32020-2012: Elastomeric bearings for bridge building. Specifications
GOST 32309-2013: Casting utensils of aluminium alloys. General specification
GOST 32503-2013: Petroleum and natural gas industries. Drilling and production equipment. Subsurface barrier valves and related equipment. General technical requirements
GOST 32504-2013: Petroleum and natural gas industries. Downhole equipment. Sand screens liquid centrifugal separators. General technical requirements
GOST 32623-2014: Automatic tensioning devices of overhead contact line of railway. General specifications
GOST 32949-2014: Automobile roads of general use. Supports of stationary electric lighting. Control methods
GOST 33172-2014: Electric chain hoists. Safety requirements.
GOST 33423-2015: Pipeline valves. Swing and lift check valves. General specifications
GOST 33435-2015: Control, monitoring and safety means of railway rolling stock. Safety requirements and control methods
GOST 33547-2015: Automobile transport facilities. Air bottles. Requirements and test methods
GOST 33683-2015: Polymer composite constructions of covered hopper wagons of 1520 mm gauge for bulk materials. Specifications
GOST 33684-2015: Polymer composite roofs for covered freight cars of 1520 mm gaugemain line railways. Specifications
GOST 33752-2017: Steel welded cylinders for liquefied hydrocarbon gas, used as motor fuel on automotive vehicle. Specifications
GOST 33797-2016: Cross beams of rigid portals for overhead contact line of railway transport. General specifications
GOST 33810-2016: Metal barrels for food liquids. Specifications
GOST 33976-2016: Welded joints in steel structures of railway rolling stock. Requirements for design, implementation and quality control
GOST 34016-2016: Cranes. Load-lifting attachment. Safety requirements
GOST 34196-2017: Electrolyzers for the production of aluminum. General technical conditions
GOST 34293-2017: Pipeline valves. Metal ball valves for petroleum, petrochemical and allied industries. General specifications
GOST 34347-2017: Steel welded vessels and apparatus. General technical conditions
GOST 34377-2018: Lifts. Hydraulic lifts. Installation, starting-up and adjustment works. The rules of the organization and manufacture of works, performance control and requirement to results of works
GOST 34473-2018: Pipe fittings. Cranes spherical steel all-welded for water thermal networks. General technical conditions
GOST 3849-78: Accessories for vertical cylindrical strorace tank for pertoleum products. Cast iron joints for swing tube
GOST 4624-70: Equipment for horizontal tanks for petroleum products. Ventilating tip
GOST 4626-79: Equipment for horizontal tanks for petroleum products. Valve inlet. Specification
GOST 5037-97: Metal cans for milk and dairy products
GOST 5044-79: Thin-walled steel drums for chemical products
GOST 5332-75: Rollers and spacings of roll tables of rolling mills. General specifications
GOST 5464-75: Pontoons of pressure floating mud pipelines and pipelines. General specifications
GOST 5761-2005: Valves for nominal pressure at most PN 250. General specifications
GOST 5762-2002: Pipeline industrial valves. Gate valves PN<=250. General specifications
GOST 5799-78: Flasks for paints and varnishes. Specifications
GOST 6619-75: Single and double horned lamellar hooks. Specifications
GOST 6625-85: Mine local ventilating fans
GOST 7075-80: Manual Traveling Underrunning Cranes Specifications
GOST 7623-84: Outdoor drainage pipes. Specification
GOST 8054-81: Metal propellers. General specifications
GOST 8777-80: Tight and slack wooden barrels
GOST 9078-84: Flat pallets
GOST 9218-2015: Automotive vehicles for transportation of food liquids. Requirements and test methods
GOST 9218-86: Tanks for food liquids mounted on vehicles
GOST 9570-2016: Box and pestpallets. General specifications
GOST 9570-84: Box and post pallets
GOST 9690-71: Lanyard stoppers
GOST R 50599-93: Welded steel vessels and apparatus under high pressure. Non-destructive control while the manufacturing and operating
GOST R 50803-2008: Food processing machinery. Tanks for cooling and storage of milk in milk-trade farms and reception stations. Technical requirements and safety parameters
GOST R 51155-2017: Line accessories. Acceptance rules and test methods
GOST R 51155-98: Line accessories. Acceptance rules and methods of tests
GOST R 51223-98: Equipment for bank protection. Sluices for transfer of values. General specifications
GOST R 51224-98: Equipment for bank protection. Doors and manholes. General specifications
GOST R 51365-2009: Petroleum and natural gas industries. Drilling and production equipment. Wellhead and Christmas tree equipment. General specifications
GOST R 51365-99: Control head oil field equipment. General specifications
GOST R 51659-2000: Tank cars of 1520 mm gauge main line railways. General specifications
GOST R 51721-2001: Installation for thermal utilization of wastes. General test methods
GOST R 51876-2002: Series 1 freight containers. Technical requirements and test methods. Part 1. General purpose containers
GOST R 51876-2008: Series 1 freight containers. Technical requirements and test methods. Part 1. General-purpose containers
GOST R 52018-2003: Shaft sinking hoppets. Specifications
GOST R 52212-2004: Shooting-galleries. Armoured protection and technical resistance to burglary. General technical requirements
GOST R 52220-2004: Monorail transport system electrical rolling stock. General safety requirements
GOST R 52232-2004: Light rail cars. General specifications
GOST R 52264-2004: Pressure diving chambers. General specifications
GOST R 52267-2004: Metal barrels for food liquids. Specifications
GOST R 52400-2005: Air reservoirs for railway brakes. General specifications
GOST R 52437-2005: Equipment for bank protection. Deposit and personal safes. General specifications
GOST R 52502-2005: Venetian blinds-rollets. General specifications
GOST R 52502-2012: Venetian metals blinds-rollets. Specifications
GOST R 52630-2006: Steel welded vessels and apparatus. General specifications
GOST R 52630-2012: Steel welded vessels and apparatus. General specifications.
GOST R 52664-2010: Welded pipe sheet piles. Specifications
GOST R 52910-2008: Vertical cylindrical steel tanks for oil and oil-products. General specifications
GOST R 53140-2008: Food processing machinery. Intermediate provers. Specifications
GOST R 53192-2014: Welded joints in steel structures of railway rolling stock. Requirements for design, production and quality control
GOST R 53473-2009: Food processing machinery. Moulders Specifications
GOST R 53474-2009: Food processing machinery. Band saw machines. Specifications
GOST R 53475-2009: Food processing machinery. Circular saw machines. Specifications
GOST R 53476-2009: Food processing machinery. Cutting machines for meat. Specifications
GOST R 53477-2009: Food processing machinery. Dough and pastry brakes. Specifications
GOST R 53478-2009: Food processing machinery. Dough mixers. Specifications
GOST R 53629-2009: Sheet piles of steel cold-formed sections. Specifications
GOST R 53671-2009: Pipeline valves. Swing and lift check valves. General specifications
GOST R 53673-2009: Pipeline valves. Butterfly wicket valves. General specifications
GOST R 53682-2009: Fired heaters for refineries. General technical requirements
GOST R 53778-2010: Buildings and constructions. Rules of inspection and monitoring of the technical condition. General requirements
GOST R 53895-2010: Food processing machinery. Mincing machines. Safety and hygiene requirements
GOST R 53896-2010: Food processing machinery. Pasta processing dryers and coolers. Safety and hygiene requirements
GOST R 53942-2010: Food processing machinery. Clipping machines. Safety and hygiene requirements
GOST R 54387-2011: Food processing machinery. Dеrinding, skinning and membrane removal machines. Safety and hygiene requirements
GOST R 54388-2011: Food processing machinery. Pie and tart machines. Safety and hygiene requirements
GOST R 54423-2011: Food processing machinery. Food processors and blenders. Safety and hygiene requirements
GOST R 54574-2011: Steel drums for paint materials. Specifications
GOST R 54784-2011: Testing agricultural tractors and machines. Methods for estimation of technical parameters
GOST R 54798-2011: Control, monitoring and safety means of railway rolling stock. Safety requirements and control methods
GOST R 54892-2012: Installation of air separation plants and other cryogenic equipment. General provisions
GOST R 55085-2012: Cylinders steel welded on pressure 1,6 MPа for liquefied hydrocarbon gas, used as motor fuel on car transport facility. Specifications
GOST R 55186-2012: Cross beams of rigid portals for overhead contact line of railway transport. General specifications
GOST R 55525-2017: Storage systems. Adjustable pallet racking. General specifications
GOST R 55601-2013: Heat exchanger apparatuses and air cooling apparatuses. Tube expanding in tube-sheets. General technical requirements
GOST R 55622-2013: Complex security systems. Hydraulic gun carriage trunks with Remote control. General technical requirements
GOST R 56204-2014: Steam and hot-water stationary boilers. Steel structures. General operating specification
GOST R 56622-2015: Removable insulating towers for operation on the railway contact network. Specifications
GOST R 57208-2016: Tunnels and subways. Rules of inspection and elimination of defects and damages under operation
GOST R 57381-2017: Storage systems. Hand loaded steel static shelving. General specifications
GOST R 57471-2017: Explosion-proof metal works. General technical requirements and test methods
GOST R 57736-2017: Mining equpment. Mine auxiliary fans. General specifications
GOST R 58037-2017: Safe boxes. Specifications
GOST R 58088-2018: Mining equipment. Mine parachutes for cages. Specifications
GOST R 58089-2018: Mining equipment. Suspension gears for mine cages. General specifications
GOST R 58115-2018: Converter transformers for voltages from 6 to 110 kV for railway traction substations. General specifications
GOST R 58174-2018: Basket trolleys. Specifications
ITNJe-93: Instruction on technical supervision and operation of pressure vessels not covered by the Rules of Gosgortechnadzor
MDS 12-22.2005: Recommendations for the application in the construction industry of the requirements of regulatory legal and other regulatory acts containing state regulatory labor protection requirements
MDS 12-25.2006: Scaffolding. Installation, calculation, and operation
MDS 12-58.2011: Scaffolding. Manufacturing, installation, operation
MDS 13-20.2004: Comprehensive methods for the inspection and energy audit of reconstructed buildings. Design Guide
MDS 53-2.2004: Diagnostics of welded steel structures
MI 2638-2001: State system for ensuring uniformity of measurements. Chamber and tubeless diaphragms installed in flanged connections of measuring pipelines. Dimensional control methods for the primary and periodic calibration of measuring systems with restricting devices
MRDS 02-08: Manual on scientific and technical support and monitoring of buildings and structures under construction, including long-span, high-altitude and unique
NPB 188-2000: Fire aerial ladder. General technical requirements. Test methods
NPB 197-2001: Fire elevators. General technical requirements. Test methods
NPB 314-2003: Firefoam elevators. General technical requirements. Test methods
ODM 218.2.044-2014: Recommendations for the performance of instrument and instrumental measurements in assessing the technical condition of bridge structures on highways
OST 108.030.30-79: Stationary structural steel boilers. General specifications.
OST 108.033.01-86: mechanical stokers. Technical conditions.
OST 20-1-74: Steel fencing for stairs, balconies and roofs. General technical requirements.
OST 24.030.10: Vessels and apparatus for water treatment plants. General technical conditions
OST 24.050.34-84: Wagon steel structures design and production. Specifications.
OST 24.125.60-89: Details and prefabricated units of steam and hot water in thermal power plants. General Specifications.
OST 24.191.08-81: Hook crane suspensions. Design and dimensions.
OST 24.200.02-91: Assembling units of steel pipelines on nominal pressure<=10 MPa (100 kgf/cm2) of complete technological lines. General specifications.
OST 24.201.03-90: Steel high-pressure vessels and devices. General technical requirements.
OST 24.940.01-90: Welded steel structures. General technical requirements.
OST 26.260.14-2001: Pressure-operated vessels and devices. Leak check techniques.
OST 26.260.18-2004: Process modules for oil and gas industry. General technical specifications
OST 26.260.480-2003: Two-ply steel vessels and devices. Welding and weld deposition.
OST 26.260.758-2003: Metal structures. General technical requirements.
OST 26-01-1434-87: Welding of steel technological pipelines on nominal pressure over 10 to 100 MPa (over 100 to 1000 kgf/cm2). Technical requirements.
OST 26-01-147-89: Drying devices with rotating drums. General technical requirements.Printing telegraph and terminals for document electric communication. Methods of printed character parameter measurement.
OST 26-01-1512-76: Axial lens compensators for PN <= 2,5 MPa (25 kgf / cm2). Technical requirements
OST 26-01-151-82: Steel welded vessels and devices for low-temperature gas separations. Technical requirements, acceptance regulations and testing methods.
OST 26-04-1222-75: Products of cryogenic engineering. General technical requirements and standards.
OST 26-11-14-88: Pressure-operated vessels and devices. Gas and liquid leak check methods.
OST 26-18-5-88: Technological units of gas and oil industry. General technical requirements.
OST 26-291-94: Steel welded vessels and devices. General technical requirements.
OST 32.100-87: Ultrasonic inspection of welds of welded joints of bridges, locomotives and cars
OST 32.146-2000: Devices of railway automation, telemechanics and telecommunications. General specification requirements
OST 34-38-446-84: Specifications for complete overhaul. Rules of construction, structure and presentation. The procedure for coordination, approval and registration.
OST 34-72-645-83: Steel structures of pylons with voltage of 0.38-35 kV. General Specifications.
OST 36-145-88: Steel technological pipelines for pressure Ру up to 10 MPa. Fluxing automatic arc welding. Typical technological process.
OST 36-146-88: Bearings for steel industrial pipelines for P 10 MPa. Specifications.
OST 36-58-81: Steel building structures. Welding. Basic requirements.
OST 36-60-81: Welding at installation of steel building constructions. Main provisions.
OST 36-62-81: Hoisting equipment. General technical requirements.
OST 36-76-83: Non-destructive testing. Welded joints of pipelines and structures. Colour method.
OST 36-79-83: Steel process pipes of carbon and low alloy steels Pi up to 10 MPa (100 kgs/cm2). Semi-automatic welding with consumable electrode in carbon dioxide. Typical process.
OST 48-41-91: Engineering products of non-ferrous metallurgy. General Specifications.
OST 95 227-92: Non-standardized products of general machine-building applications. General technical requirements.
PB 03-384-00: Rules for design, manufacture and acceptance of steel welded vessels and apparatus
PB 10-77-94: Installation and Safe Operation Requirements for Escalators
PNAE G-10-032-92: Requirements for welding seal element control of nuclear plant confining safety systems
PNST 248-2017: On-board cryogenic tanks for locomotives on liquefied natural gas. General specifications
R 50-54-37-88: Recommendations. Calculations and tests of strength. Methods of mechanical testing of metals. Test method for corrosion cracking with a constant rate of deformation
R Gazprom: Temporary technical requirements for equipment for opening pipelines
RD 03-380-00: Guidelines for Inspection of Spherical Tanks and Gas Holders for Storage of Liquefied Gases Under Pressure
RD 03-410-01: Instructions on the procedure of comprehensive engineering certification of cryogenic tanks for liquefied gases
RD 11-288-99: Method for determining the technical condition of the blast-furnace and air heater housings
RD 153-112-017-97: Instructions for the diagnosis and assessment of residual life of vertical steel tanks
RD 153-34.0-04.185-2003: Machines and equipment for construction, technical re-equipment and repair of energy facilities. Requirements for design, materials, manufacturing, acceptance and testing
RD 153-34.1-21.530-99: Procedural Guidelines for Inspection of Structural Elements of Process Buildings and Structures of Thermal Power Stations. Part 2: Metal Structures
RD 153-34.2-31.604-2002: Recommendations on technological issues of repair and reconstruction of the chambers of impellers of hydraulic units in order to increase their operational reliability
RD 22-207-88: Lifting machines. General requirements and production standards
RD 24.020.11-93: Welded joints of stationary steam, gas and hydraulic turbines. Testing rules and quality evaluation standards.
RD 24.942.02-90: Electroslag welding of chemical and petroequipment from low-alloyed and heat-resistant steels
RD 26.260.010-2002: The leading document on standardization. The list of standard documentation on standardization on the cells and devices working under pressure.
RD 26.260.010-97: List of Regulatory Documents on Standardization for Pressure Vessels and Apparatus
RD 26.260.225-2001: Bodies of cylindrical vessels and devices. Technology, quality assurance
RD 26-02-77-88: Columnar devices. Installation of plates. Technology, equipment, accessories
RD 26-02-80-2004: The leading document. Welded coils for pipe furnaces. Requirements to design, production and delivery.
RD 26-17-78-87: Pulsed-arc welding of chemical oil equipment from stainless steels with a consumable electrode in argon
RD 26-8-87: Welding of cold-resistant low-alloyed steels used in structures operated at low temperatures
RD 31.1.02-04: Rules of technical operation of lifting and transport equipment of sea trading ports
RD 31.44.01-97: Rules of technical operation of lifting and transport equipment of sea trading ports
RD 31.46.05-87: Typical test program for experimental and serial cable-type grabs
RD 34 02.028-2007: Technical rules. Mechanical equipment and special steel structures for hydraulic structures. Manufacturing, installation and acceptance.
RD 34.17.427-89: Procedural Guidelines. Nondestructive Testing at Thermal Power Stations. General Requirements
RD 34.27.201: Technical Requirements for the Fabrication, Installation, and Corrosion Protection of Ash Collector with Venturi Tube Type MV
RD 34.27.202: Guidelines for Installation of Electric Filters Type UG
RD 34.39.201: Guidelines for Installation of Steam and Water Piping Systems in Thermal Power Stations
RD 34.40.601-97: Procedural Guidelines for Inspection of Hot Water Storage Tanks
RD 36-62-00: Hoisting equipment. General technical requirements.
RD 3689-001-00220302/31-2004: Radiant pipes and components for reaction pipe furnaces. Requirements for design, production and delivery.
RD 3689-002-00220302/31-2008: Welding of radiant tubes and their elements for reaction tube furnaces. Main provisions
RD 38.13.004-86: Operation and repairs of process pipelines operating under pressure up to 10.0 MPa (100 kgf/cm2)
RD 39-0147014-535-87: Instructions for welding at installation and repair of pipelines and critical metal structures in organizations and enterprises of the Ministry of oil and gas industry.
RD 39-132-94: Regulations for Operation, Inspection, Repair and Rejection of the Field Pipelines 1994
RD 50:48:0075.03.05: Recommendations for the design and safe operation of elevated crane tracks
RD 51-553-94: Instructions for technical certification of gas accumulators GSS-1-1-10,0-25U-001 during the operation of gas filling stations of gas compressor stations (AGNKS)
RD RTM 26-07-246-80: Design, manufacturing and control regulations for steel pipeline fittings welded joints.
RD RTM 38.14.006-86: Method for determining the service life of the coils of catalytic reforming furnaces that have worked out the project resource
RDI 38.18.016-94: Instructions for ultrasonic control of welded joints for technological equipment.
RDI 38.18.019-95: Instructions for capillary testing of parts for production equipment, weld joints and overlays.
Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope
RST RSFSR 45-86: Sledge for children. Technical conditions
RST RSFSR 655-81: Ice screws fishing. General technical conditions
RST RSFSR 698-83: Ovens made of sheet steel. Technical conditions
RTM 26-07-133-93: Pipeline fittings. Welding and a building-up of details from titanic alloys. Technical requirements and quality control.
SNiP 3.03.01-87: Bearing and enclosing structures
SNiP 3.05.05-84: Processing equipment and process pipelines
SP 70.13330.2012: Bearing and enclosing structures. Updated living edition of SNiP 3.03.01-87
SP 79.13330.2012: Bridges and culverts. Rules of examination and test
ST RK 1358-2005: Pressure vessels. Requirements for welding steels
ST RK 1450-2005: Non-destructive testing. Weld joints of railway bridges, locomotives and cars. Ultrasonic methods
ST TsKBA 006-2003: Pipe fittings. Cryogenic fittings. General technical conditions
ST TsKBA 045-2009: Pipe fittings. Welding and surfacing of parts made of titanium and titanium alloys. Technical requirements and quality control
ST TsKBA 089-2010: Pipe fittings. Welding defects castings. Technical requirements
STB 1026-2008: Section metal railing for bridges and overpasses. Technical conditions
STB GOST R 51659-2001: Railroad tankers of mainline railways of 1520 mm gauge. General specifications
TR 182-08: Technical recommendations on scientific and technical support and monitoring of the construction of long-span, high-altitude and other unique buildings and structures
TU 102-199-78: Therapeutic and prophylactic unit for hot dry baths
TU 102-237-85: Mobile buildings (inventory) of the block of the "Watch" system. Group specifications
TU 102-314-81: Boxing unified for production and auxiliary buildings of land objects of the oil and gas industry
TU 102-360-85: Aluminum aluminum masts for radio relay communication type MAP
TU 102-377-84: A set of elements for mobile (inventory) collapsible buildings of the structural construction system SKZ-M. Group specifications
TU 102-390-85: Vibrational low-frequency platforms with spatial oscillations of the HSV type
TU 102-425-86: A set of structures for the building of crane (crane) with structures frame production span of 12 and 18M
TU 102-529-89: Mobile buildings (inventory) of the block-containers of the panel construction of the Neftegazstroy system
TU 102-533-89: A set of structures on a building without a crane with arched span of 12, 15 and 18 m
TU 22-3193-75: Cell air filters of type FN, FNR, FNP, FNP. Technical conditions
TU 26-05-108-88: Acetylene mobile generators of continuous action with a capacity of up to 3 m3
TU 34-38-20201-94: Stationary steam boilers. Piping within the boiler. General technical conditions for major repairs
TU 36.26.11.01-06-92: Windows and bindings of light emitting lamps. Technical conditions
TU 36-1199-81: Slatted welded floor type "Visp". Technical conditions
TU 36-1395905-015-95: A set of structures of buildings of arched type. Technical conditions
TU 36-2009-77: Steel structures of steel vertical cylindrical tanks with a capacity from 100 to 20,000 m3 for the storage of oil and oil products. Technical conditions
TU 36-2287-80: Bent closed welded square and rectangular profiles
VMU 50:48:0075-02-02: Platform buffers. General requirements for design, construction and operation
VSN 362-87: Disinfections and Etching of Pipelines
VSN 39-87: Ordinance for Planned Preventive Maintenance and Operation of Production Equipment at Construction Industry Companies Administered by the USSR Gosagprom. Part 1
GOST 12393-2019: Rail contact network fittings linear. General specifications
GOST 23858-2019: Welded butt joints of reinforced concrete structures. Ultrasonic methods of quality control. Acceptance rules
GOST 34058-2017: Internal buildings and structures utilities. Mounting and start-up adaptive control of air-conditioning evaporative and condensing units. General technical requirements
GOST R 58362-2019: The main pipeline transport of oil and oil products. Automation and telemechanization of technological equipment. Key Points, Terms and Definitions
GOST R 58619-2019: The main pipeline transport of oil and oil products. Tank equipment. Pontoons. General specifications
GOST R 58684-2019: Fireproof ship doors. General specifications
GOST R 58702-2019: Guides Safety Requirements and Test Methods
GOST R 58720-2019: Carts, side frames, nadressorny beams and connecting special freight-type cars. General specifications
GOST R 58753-2019: Cargo rope slings for construction. Technical specifications
GOST R 58863-2020: Production tables. Metal workbenches. General specifications
GOST R 58864-2020: Tool cabinets made of metal. General specifications
GOST R 58934-2020: Plants for the manufacture of reinforced concrete volume blocks of sanitary cabins and elevator shafts. Specifications
GOST R 58935-2020: Forms for the manufacture of reinforced concrete vibrohydropressed pressure pipes. Specifications
ITN 93: Instructions for technical supervision, methods of audit and rejection of tube furnaces, tanks, vessels and apparatuses of oil refining and petrochemical industries
Manual for SNiP III-18-75: A manual on quality control methods for welded joints of metal structures and pipelines performed in construction
MU 2002-2002: Methodology for examining the technical condition of cabinet elevators for drill and casing KM type and cast elevators for casing EN type to determine the possibility of their further operation
MU 9001.00.001: Diagnostic technique for Romanian fountain fittings that have worked out their standard service life
OTU 3-01: Vessels and apparatuses. General specifications for the repair of buildings
POT R O-00-97: Occupational Safety and Health Requirements in the Pulp and Paper and Rosin Industry
RD 059/01-2019: Instructions for welding and surfacing during the repair of freight cars (with Amendment No. 1)
RD 31.44.06-89: Low loader semi-trailers. Repair Specifications
RD 31.55.03.07-86: Restoration of cast-iron diesel pistons D100 surfacing. Typical Processes
RD 50:48:0075.02.05: Platform buffers. Recommendations for design, construction and operation
RD ROSEK-003-97: Hoisting machines. Magnetic particle control. Key Points
RD ROSEK-01-002-96: Hoisting machines. Metal structures. Radiation control. Key Points
RSN 342-86: Technology for reinforcing building structures in reconstructed enterprises
RTM 24-85: Information index of state, republican and industry standards, technical specifications for materials and products used in the design of furnaces and dryers
SDOS-04-2009: Construction control. Methodology for conducting construction control during construction, reconstruction, overhaul of capital construction facilities
SP 411.1325800.2018: Pipelines trunk and field for oil and gas. Tests before the delivery of constructed facilities
STO-SA-03-002-2009: Rules for the design, manufacture and installation of vertical cylindrical steel tanks for oil and oil products
TU 102-459-88: PR531 separator piston
Customers Who Viewed This Item Also Viewed:
Electromagnetic compatibility of technical equipment. Immunity of equipment for general lighting purposes to electromagnetic disturbance. Requirements and test methods
Еlectromagnetic compatibility of technical equipment. Harmonic current emissions (equipment input current <= 16 A per phase). Limits and test methods
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
Pipeline valves. General safety requirements
Еlectromagnetic compatibility of technical equipment. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems. Equipment with rated current <= 16 A and not subject to conditional connection. Limits and test methods
Obosnovanie bezopasnosti oborudovaniya. Rekomendatsii po podgotovke
Steel welded vessels and apparatus. General technical conditions
Conformity assessment system for the use of nuclear energy. Personnel in the non-destructive and destructive testing of metal. Requirements and qualification procedure Дата введения в действие 15.03.2018
State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
Unified system of corrosion and ageing protection. Paint coatings. Groups of operation conditions
Atom stations. Equipment, instruments, means of monitoring and control systems. General technical requirements
System of design documents for construction. Basic requirements for design and working documentation
Reinforcing rolled products for reinforced concrete constructions. Specifications
Passenger cars on locomotive traction. Requirements for structural strength and dynamic qualities
Non-destructive Testing. Welded Joints. Ultrasonic Methods
Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements
Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
Pipeline valves. Leakage rates of valves
Compilation and execution of safety data sheet of chemical products
Supports for Cylindrical and Conical Upright Apparatus. Types and Basic Parameters
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.