imgalt

GOST 14098-91

ГОСТ 14098-91

Welded joints of reinforcement and inserts for reinforced concrete structures. Types, constructions and dimensions

Соединения сварные арматуры и закладных изделий железобетонных конструкций. Типы, конструкции и размеры

Status: Not effective - Superseded. Information on the registration of 1374-st dated 10/22/2014 (the official website of FSUE "Standartinform") (IUS 7-2015)

The standard applies to welded joints of rod reinforcement and reinforcing wire with a diameter of 3 mm and more, welded joints of rod reinforcement with steel with a thickness of 4 to 30 mm, made in the manufacture of reinforcement and embedded products of reinforced concrete structures, as well as during installation of prefabricated structures and the construction of monolithic reinforced concrete structures. The standard establishes the types, design and dimensions of the specified welded joints performed by resistance and arc welding. The standard does not apply to welded joints of embedded products that do not have reinforcing steel anchor rods

Стандарт распространяется на сварные соединения стержневой арматуры и арматурной проволоки диаметром 3 мм и более, сварные соединения стержневой арматуры с прокатом толщиной от 4 до 30 мм, выполняемые при изготовлении арматурных и закладных изделий железобетонных конструкций, а также при монтаже сборных и возведении монолитных железобетонных конструкций. Стандарт устанавливает типы, конструкцию и размеры указанных сварных соединений, выполняемых контактной и дуговой сваркой. Стандарт не распространяется на сварные соединения закладных изделий, не имеющих анкерных стержней из арматурной стали

Choose Language: 
Format: Electronic (pdf/doc)

Approved: USSR State Committee for Construction and Investment, 11/28/1991

SKU: RUSS17898

Price: $669.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Regulations » Documents System of normative documents in construction » 5. Regulatory documents for building structures and products » k.52 Reinforced concrete and concrete structures »

Welding regulations » Welding work »

Welding regulations » Main materials »

Welding regulations » Metal structures »

Welding regulations » Welding materials »

Welding regulations » Documentation »

Welding regulations » Defects »

Welding regulations » Assembly devices »

Welding regulations » Welding work » Manual welding »

Welding regulations » Welding work » Mechanized welding »

Welding regulations » Main materials » Steel, cast iron »

Welding regulations » Welding materials » Wire »

Welding regulations » Welding materials » Fluxes »

Welding regulations » Welding materials » Gases »

ISO classifier » 25 MECHANICAL ENGINEERING » 25.160 Welding, brazing and hard soldering » 25.160.40 Welds and welding »

National standards » 25 MECHANICAL ENGINEERING » 25.160 Welding, brazing and hard soldering » 25.160.40 Welds and welding »

ISO classifier » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.080 Structures of buildings » 91.080.40 Concrete structures »

National standards » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.080 Structures of buildings » 91.080.40 Concrete structures »

ISO classifier » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.190 Fittings for buildings »

National standards » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.190 Fittings for buildings »

National Standards for KGS (State Standards Classification) » Latest edition » Zh Construction and building materials » Zh3 Building structures and parts » Zh33 Stone, brick, concrete and reinforced concrete structures and parts »

National Standards for OKSTU » REINFORCED CONCRETE STRUCTURES AND PARTS (INCLUDING REINFORCED CONCRETE CONCRETE PRODUCTS) » Reinforcement for structures. Forms and equipment for the production of structures »


The Document is Replaced With:

GOST 14098-2014: Welded joints of reinforcement and inserts for reinforced concrete structures. Types, constructions and dimensions

As a Replacement Of:

GOST 14098-85: Welded joints of reinforcement and inserts for reinforced concrete structures. Types, construction and dimensions

The Document References:

GOST 5264-80: Manual arc welding. Welding joints. Main types, design elements and dimensions

GOST 10884-81: Heat strengthened steel bars of periodical section for concrete reinforcement. Technical requirements

GOST 10884-94: Thermomechanically hardened steel bars for reinforced concrete constructions. Specifications

GOST 10922-90: Welded reinforcing products and inserts, welded joints of reinforcement and inserts for reinforced concrete structures. General specifications

GOST 14098-85: Welded joints of reinforcement and inserts for reinforced concrete structures. Types, construction and dimensions

GOST 2601-84: Welding of metals. Terms and definitions of basic concepts

GOST 5781-82: Hot-rolled steel for reinforcement of ferroconcrete structures. Specifications

GOST 8713-79: Flux welding. Welded joints. Maih types design elements and dimensions

The Document is Referenced By:

GOST 10884-94: Thermomechanically hardened steel bars for reinforced concrete constructions. Specifications

GOST 10922-2012: Welded reinforcing products and inserts, welded, lap and mechanical joints for reinforced concrete structures. General specifications

GOST 10922-90: Welded reinforcing products and inserts, welded joints of reinforcement and inserts for reinforced concrete structures. General specifications

GOST 11118-2009: Autoclaved aerated concrete panels for external walls of buildings. Specifications

GOST 14098-2014: Welded joints of reinforcement and inserts for reinforced concrete structures. Types, constructions and dimensions

GOST 19804.5-83: Reinforced concrete round hole piles and pile-shells. Structure and dimensions

GOST 19804.6-83: Reinforced-concrete round hole built-up piles and tubular piles. Structure and dimensions

GOST 19804.7-83: Two-console reinforced concrete pile-pillars for agricultural buildings. Construction and dimensions

GOST 21.501-2011: System of design documents for construction. Rules for execution of the working documentation of architectural and construction solutions

GOST 21.501-93: System of design documents for construction. Rules for execution of architectural and construction working drawings

GOST 21924.3-84: Reinforced concrete slabs for pavements of city roads. Structure fittings products. Structure and dimensions

GOST 23279-2012: Welded reinforcing meshes for reinforced concrete structures and products. General specifications.

GOST 23279-85: Welded reinforcing meshes for reinforced concrete structures and products. General specifications

GOST 25912.4-91: Structure fittings and mountings products of reinforced concrete slabs for aerodrome pavement. Construction

GOST 28042-89: Reinforced concrete roofing for enterprises buildings. Specifications

GOST 32020-2012: Elastomeric bearings for bridge building. Specifications

GOST 6665-91: Concrete and Reinforced Concrete Curbs. Specifications

GOST 8478-81: Welded meshes for reinforced concrete structures. Specifications

GOST 8484-82: Reinforced concrete window stools for production buildings. Design and dimensions

GOST 9561-2016: Reinforced concrete multihollow panels for floors in buildings. Specifications

GOST R 52544-2006: Weldable deformed reinforcing rolled products of A500C and B500C classes for reinforcement of concrete constructions. Specifications

Manual: Manual for impulse and low consumption fire extinguishing systems

Manual for MGSN 2.07-01: Inspection and monitoring during the construction and reconstruction of buildings and underground structures

MDS 12-23.2006: Temporary recommendations on the technology and organization of construction of multifunctional high-rise buildings and building complexes in Moscow

MDS 12-5.2000: Gosgortekhnadzor of Russia Employee's Manual for Quality Control of Construction and Installation Work

MDS 12-65.2014: Project production work. Concreting of reinforced concrete structures of a building (structure) using concrete pumps

MDS 12-7.2000: Guidelines On Procedure for State Supervision for Compliance with Construction Standards and Codes during Construction and Installation Activities at Industrial Facilities

MRDS 02-08: Manual on scientific and technical support and monitoring of buildings and structures under construction, including long-span, high-altitude and unique

ODM 218.4.002-2008: Guidelines for monitoring the status of existing bridge structures

ODM 218.4.003-2009: Recommendations for joining metal beams with a monolithic slab by means of continuous comb stops in steel concrete bridges

OST 32.72-97: Reinforced concrete slabs without ballast bridge bed for metal superstructures of railway bridges. General specifications

PNST 309-2018: Roads are public. Bridges and pipes road. Technical requirements

R 8-76/NIIZhB: Recommendations for ultrasonic testing of reinforcement welds of reinforced concrete structures

RD 03-495-02: Procedures for the qualification test of welders and welding work specialists

RMD 31-04-2008 Sankt-Peterburg: Recommendations for construction of residential and public high-rise buildings

RTM 393-94: Technical Guides for welding and quality control of the joints of reinforcement and embedded items of concrete elements

RTM 5-05-2009: Guiding technical materials for the design, manufacture and use of steel fiber concrete structures on the fiber of thin steel wire

RTM 75-95: Process Guidelines for Factory Production of Prefabricated Prestressed Reinforced Concrete Structures -

Rules on the Selection of Pressure Vessels and Equipment: Instruction on the selection of pressure vessels and devices operating under pressure of 100 kgf/cm2 and overpressure protection, Ministry of Petroleum Energy

SN 393-78: Instructions for welding of reinforcement joints and embedded parts of reinforced concrete structures

SNiP 3.09.01-85: Precast reinforced concrete structure and work-piece production

SNiP 52-01-2003: Concrete and ferroconcrete structures. Principal rules

SP 120.13330.2012: Subway systems

SP 12-106-2004: Rules for the examination of the knowledge of welding production personnel for admission to welding work in the construction industry, building materials industry and housing and communal complex

SP 13-102-2003: Rules of inspection of bearing structures of buildings and facilities

SP 14.13330.2011: Construction in seismic regions.

SP 14.13330.2014: Construction in seismic regions SNIP II-7-81 (revision SP 14.13330.2011)

SP 14.13330.2018: Seismic building design code

SP 27.13330.2011: Concrete and Reinforced Concrete Structures intended for the Service in Elevated and High Temperatures

SP 32-101-95: Design and installation of the foundations of bridges in areas with permafrost

SP 32-105-2004: Subways

SP 35.13330.2011: Bridges and pipes. Updated living edition of SNiP 2.05.03-84

SP 50-102-2003: Design and construction of soil bases and foundations for buildings and structures

SP 52-101-2003: Concrete and reinforced concrete structures without prestressing

SP 52-101-2003, Reference Materials: Manual for the design of concrete and reinforced concrete structures made ​​of heavy concrete without prestressing reinforcement

SP 52-102-2004: Pre-stressed concrete structures

SP 52-104-2006: Steel fibre reineorced concrete structures

SP 52-110-2009: Concrete and reinforced concrete structures subjected to technological high and high temperatures

SP 52-117-2008*: Reinforced concrete spatial structures of coatings and floors. Part I. Calculation methods and design

SP 63.13330.2012: Concrete and reinforced concrete structures. General provisions.

SP 70.13330.2012: Bearing and enclosing structures. Updated living edition of SNiP 3.03.01-87

ST RK 1855-2008: Bridgeworks and culverts on motor roads. Concrete drive piles for bridge piers. General specification

ST RK 1858-2008: Bridgeworks and culverts on motor roads. Requirements at designing of concrete and reinforced concrete structures

STA 25.03.02-2004: Combined security system

Supplement to SP 63.13330: Toolkit. Calculation of reinforced concrete structures without prestressed reinforcement

TR 162-04: Technical recommendations on the use of reinforced concrete pipes with an inner plastic sheath

TR 182-08: Technical recommendations on scientific and technical support and monitoring of the construction of long-span, high-altitude and other unique buildings and structures

TR 50-180-06: Technical recommendations for the design and installation of pile foundations using discharge-pulse technology for high-rise buildings

TR 94.03.2-99: Standard Procedure for Operational Quality Control of Construction, Installation, and Military Construction Work During Construction of Buildings and Structures. 03.2: Construction of Super-Structures Made from Precast Reinforced Concrete Elements

TR 94-2003: Crop loops of precast concrete and reinforced concrete structures, design, calculation and testing. Technical recommendations

TU 5851-008-01388383-2002: Reinforced concrete beams with frame fittings for the superstructure of road bridges and overpasses with a length of 12, 15 and 18 m. Specifications

TU 5853-001-04000633-2006: Adjustable tip manholes. Technical conditions

VSN 48-93: Installation Manual for Cast-In-Place Concrete and Reinforced Concrete Tunnel Lining for Transportation Tunnels

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Controllers acting without
Language: English
Price: $151.00
imgalt
Building materials. Methods for combustibility test
Language: English
Price: $162.00
imgalt
Building materials spread flame test method
Language: English
Price: $147.00
imgalt
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English
Price: $283.00
imgalt
Clear sheet glass. Specifications
Language: English
Price: $250.00
imgalt
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English
Price: $139.00
imgalt
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $549.00
imgalt
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English
Price: $700.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!