GOST R 50571.21-2000
ГОСТ Р 50571.21-2000
|
|
Electrical installations of buildings. Part 5. Selection and erection of electrical equipment. Section 548. Earthing arrangements and equipotential bolding for information technology installations
Электроустановки зданий. Часть 5. Выбор и монтаж электрооборудования. Раздел 548. Заземляющие устройства и системы уравнивания электрических потенциалов в электроустановках, содержащих оборудование обработки информации
Status: Not effective - Superseded. IUS 2-2013
This standard applies to electrical installations of buildings used in all sectors of the country's economy, regardless of ownership and forms of ownership, and establishes requirements for the selection and installation of electrical equipment, in particular for the design and installation of grounding devices, equalization systems and equalization of electrical potentials in electrical installations containing information processing equipment interconnected for data exchange, as well as other electrical equipment that is sensitive to interference
Настоящий стандарт распространяется на электроустановки зданий, применяемые во всех отраслях экономики страны, независимо от принадлежности и форм собственности, и устанавливает требования по выбору и монтажу электрооборудования, в частности к выбору конструкции и монтажу заземляющих устройств, систем уравнивания и выравнивания электрических потенциалов в электроустановках, содержащих оборудование обработки информации, соединенное между собой для обмена данными, а также другое электрооборудование, чувствительное к помехам
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstandart of Russia,
12/18/2000
SKU: RUSS17909
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
29 Electrical Engineering »
Construction (Max) »
Standards »
Other state standards used in construction »
91 Building materials and construction »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
III Occupational safety requirements for production equipment and processes »
2 Safety requirements for certain types of work »
2.10 Operation of electrical installations, electrical equipment and power tools »
ISO classifier »
29 ELECTRICAL ENGINEERING »
29.120 Electrical fittings »
29.120.50 Fuses and other protective devices in case of overload »
National standards »
29 ELECTRICAL ENGINEERING »
29.120 Electrical fittings »
29.120.50 Fuses and other protective devices in case of overload »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.140 Installations in buildings »
91.140.50 Power supply systems »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.140 Installations in buildings »
91.140.50 Power supply systems »
National Standards for KGS (State Standards Classification) »
Latest edition »
E Power and electrical equipment »
E0 General rules and regulations for electrical and heat engineering »
E07 Occupational Safety »
National Standards for KGS (State Standards Classification) »
Latest edition »
E Power and electrical equipment »
E0 General rules and regulations for electrical and heat engineering »
E08 Application and operation »
National Standards for OKSTU »
ELECTRICAL EQUIPMENT AND MATERIALS »
General rules and regulations »
National Standards for OKSTU »
ELECTRICAL EQUIPMENT AND MATERIALS »
High-voltage electrical equipment »
The Document is Replaced With:
GOST R 50571.5.54-2011: Low-voltage electrical installations. Part 5-54. Selection and erection of electrical equipment. Earthling arrangements, protective conductors and protective bonding conductors
The Document References:
GOST 30331.2-95: Electrical installations of buildings. Part 3. General characteristics
GOST 30331.3-95: Electrical installations of buildings. Part 4. Protection for safety. Protection against electric shock
GOST R 50571.10-96: Electrical installations of buildings. Part 5. Selection and erection of electrical equipment. Chapter 54. Earthing arrangements and protective conductors
GOST R 50571.1-2009: Low-voltage electrical installations. Part 1. Fundamental principles, assessment of general characteristics and definitions
GOST R 50571.14-96: Electrical installations of buildings. Part 7. Requirements for special installations or locations. Section 705. Electrical installations of agricultural and stock-breeding buildings
GOST R 50571.19-2000: Electrical installations of buildings. Part 4. Protection for safety. Chapter 44. Protection against overvoltages. Section 443. Protection against overvoltages of atmospheric origin or due to switching
GOST R 50571.20-2000: Electrical installations of buildings. Part 4. Protection for safety. Chapter 44. Protection against overvoltages. Section 444. Protection against electromagnetic interferences (EMI) in installations of buildings
GOST R 50571.22-2000: Electrical installations of buildings. Part 7. Requirements for special installations or locations. Section 707. Earthling requirements for the installation of data processing equipment
GOST R 50571.23-2000: Electrical installations of buildings. Part 7. Requirements for special installations or locations. Section 704. Construction and demolition site installations
GOST R 50571.2-94: Electrical installations of buildings. Part 3. General characteristics
GOST R 50571.3-2009: Low-voltage electrical installations. Part 4-41. Requirements for safety ensuring. Protection against electric shock
GOST R 50571-4-44-2011: Low-voltage electrical installations. Part 4-44. Safety requirements. Protection against voltage disturbances and electromagnetic disturbances
GOST R IEC 60950-2002: Safety of information technology equipment
The Document is Referenced By:
GOST IEC 62606-2016: Arc fault detection devices for household and similar use. General requirements
GOST R 12.1.009-2009: Occupational safety standards system. Electrical safety. Terms and definitions
GOST R 50571.20-2000: Electrical installations of buildings. Part 4. Protection for safety. Chapter 44. Protection against overvoltages. Section 444. Protection against electromagnetic interferences (EMI) in installations of buildings
GOST R IEC 60519-1-2005: Safety in electric heating equipment. Part 1. General requirements
GOST R IEC 60950-22-2009: Information technology equipment. Safety. Part 22. Equipment to be installed outdoors
Manual: Manual for impulse and low consumption fire extinguishing systems
TR 205-09: Technical recommendations on the design of anti-terrorism security systems and integrated security of high-rise and unique buildings
VSP 07.02.22 Russian Defense Ministry: Standards for the design, installation and operation of lightning protection of military infrastructure
|
Customers Who Viewed This Item Also Viewed:
 |
Liquids for aircrafts systems. Method for determination thermo oxidizing stability and corrosion activity
Language: English |
Plastics structured-wall pipes and their fittings for sewerage systems outside the buildings. Specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
