imgalt

GOST 1012-72

ГОСТ 1012-72

Aviation petrol

Бензины авиационные

Status: Not effective - Superseded. Information about the registration of 1861-st dated November 22, 2013 (the official website of Rosstandart); IUS 7-2014

The standard applies to direct-distillation gasoline, catalytic cracking and reforming with the addition of high-quality components, ethyl fluid and antioxidant.

Стандарт распространяется на авиационные бензины прямой перегонки, каталитического крекинга и реформинга с добавкой высококачественных компонентов, этиловой жидкости и антиокислителя.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: USSR State Committee for Standards, 1/6/1972

SKU: RUSS17941

Price: $132.00



imgalt

The Product is Contained in the Following Classifiers:

Evidence base (TR CU, Technical Regulation of the Customs Union) » 013/2011 TR CU. About requirements to automobile and aviation gasoline, diesel and marine fuel, jet fuel and fuel oil » Regulations and standards (to ТР ТС ТС 013/2011) »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.2 Testing and control of products of fuel and energy industry » 4.2.2 Oil, oil products and gas »

ISO classifier » 75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION » 75.160 Fuel » 75.160.20 Liquid fuel »

National standards » 75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION » 75.160 Fuel » 75.160.20 Liquid fuel »

National Standards for KGS (State Standards Classification) » Latest edition » B Oil products » B1 Liquid and gaseous fuel » B12 Carburetor fuel »


The Document is Replaced With:

GOST 1012-2013: Aviation petrols. Specifications

As a Replacement Of:

GOST 1012-54: Aviation petrols. Specifications

The Document References:

GOST 10652-73: Reagents. Dihydrate ethylenediaminetetraacetic acid disodium salt. Specifications

GOST 11362-96: Petroleum products and lubricants. Neutralization number. Potentiometric titration method

GOST 12.1.018-93: Fire and explosion safety of static electricity. General requirements.

GOST 12.4.011-89: Occupational safety standards system. Means of protection. General requirements and classification

GOST 12.4.103-83: Occupational safety standards system. Special protective clothes, personal means of hand and legs protections. Classification

GOST 12.4.111-82: Men's suits for protection against oil and products of oil processing

GOST 12.4.112-82: Women’s suites for protection from oil and oil products

GOST 13210-72: Benzenes. Determination of plumbum content by complexometric titration

GOST 1381-73: Hexamethylenetetramine for industrial use. Specifications

GOST 14261-77: Hydrochloric acid super pure. Specifications

GOST 14710-78: Petroleum toluene

GOST 1510-84: Petroleum and petroleum products. Marking, packing, transportation and storage

GOST 1567-97: Petroleum products. Motor gasoline and aviation fuels. Determination of gum content by jet evaporation method

GOST 1756-2000: Petroleum products. Determination of saturated vapours pressure

GOST 1770-74: Laboratory volumetric glassware. Cylinders, beakers, measuring flasks, test tubes. General specifications

GOST 18481-81: Glass hydrometers and cylinders. General specifications

GOST 19121-73: Petroleum Products Determination of sulphur content by lamp method

GOST 2070-82: Light petroleum products. Methods for determination of iodine numbers and content of unsaturated hydrocarbons

GOST 20924-75: Automobile and aviation gasoline. Method for determination of colour intensity

GOST 21261-91: Oil products. Method for the determination of gross calorific value and calculation of net calorific value

GOST 2177-99: Petroleum products. Methods for determination of distillation characteristics

GOST 24104-2001: Laboratory scales. General technical requirements

GOST 24104-88: General purpose and reference laboratory balances

GOST 2517-85: Crude oil and petroleum products. Methods of sampling

GOST 25336-82: Laboratory glassware and equipment. Basic parameters and dimensions

GOST 28498-90: Liquid-in-glass thermometers

GOST 28781-90: Petroleum and petroleum products. Method for determination of saturated vapours pressure by mechanical dispersing

GOST 28782-90: Ferroalloys. Experimental methods for checking the precision of sample division

GOST 28828-90: Benzenes. Method for determination of plumbum

GOST 3118-77: Reagents. Hydrochloric acid. Specifications

GOST 3338-68: Aviation gasolines. Method for determination of performance number by rich mixture

GOST 3900-85: Petroleum and petroleum products. Method for determination of density

GOST 4236-77: Reagents. Lead nitrate. Specifications

GOST 433-73: Rubber-insulated power cables. Specifications

GOST 443-76: Benzene-solvent for rubber industry. Technical requirements

GOST 5066-91: Motor fuels. Methods for determination of cloud, chilling and freezing points

GOST 511-82: Fuel for engines. Motor method for determination of octane number

GOST 5985-79: Petroleum products. Method for determination of acidity and acid number

GOST 6307-75: Petroleum products. Method of test for water-soluble acids and alkalies

GOST 6321-92: Engine fuels. Method for copper strip test

GOST 6667-75: Aviation gasoline. Period of stability method

GOST 6994-74: White petroleum products. Method for determination of aromatic hydrocarbons

GOST 7423-55: Aviation petrols. Determination of paraoxydiphenylamine content

GOST 8489-85: Motor fuel. Method for determination of existent gums (Budarov's)

GOST 8505-80: Nefras-C 50/170. Specifications

GOST R 51859-2002: Petroleum products. Determination of sulphur content by lamp method

GOST R 51947-2002: Petroleum and petroleum products. Determination of sulphur by method of energy-dispersive X-ray fluorescence spectrometry

GOST R 52946-2008: Petroleum products. Determination of knock characteristics of motor and aviation fuels. Motor method

GOST R EN ISO 3405-2007: Petroleum products. Method for determination of distillation characteristics at atmospheric pressure

The Document is Referenced By:

Application manual SP 12.13130.2009: The manual on the application of SP 12.13130.2009 "Definition of categories of premises, buildings and outdoor installations for explosion and fire hazard"

GKINP 15-236-91: Instructions for printing processes in kartoizdaniya

GKINP 43: Topographic Photo Maker Guide

GOST 10306-75: Lubricating oils. Method of evaporation loss in dynamic conditions

GOST 10362-76: Pressure hoses of vulcanized rubber with thread reinforcement and without end fitting. Specifications

GOST 1086-74: Silk insulating threads. Specifications

GOST 11066-74: Thermostable silicoorganic lacquers and enamels. Specifications

GOST 11122-84: Hinge oil BНИИ НП-25. Specifications

GOST 1121-75: Flat-parallel glass. Sets

GOST 12172-74: Phenol-polivinylacetyl adhesives. Specifications

GOST 12422-78: Silk technical fabrics. Test methods

GOST 13056.9-68: Seeds of forest tree and shrub species. The methods of the entomological control

GOST 13739-78: Immersion oil for microscopy. Technical requirements. Methods of testing

GOST 13835-73: Low-molecular thermal shock resistant synthetic rubber СКТН. Specifications

GOST 14028-63: Optical length gauges

GOST 14147-80: Varnish ФЛ-559. Specifications

GOST 14311-85: Steel cord

GOST 14338.4-82: Molybdenum. Methods for determination of nitrogen, oxygen and hydrogen

GOST 14339.4-82: Tungsten. Methods for the determination of nitrogen, oxygen, hydrogen

GOST 14839.5-69: Industrial explosives. Method for determination of paraffin content in dinaphtalite

GOST 16295-82: Packing anticorrosive paper. Specifications

GOST 17122-85: Diamond grinding heads

GOST 17332-71: Unified system of corrosion and ageing protection. Metals, alloys, metal and non-metal inorganic coatings. Test methods at climatic test stations

GOST 17432-72: Powder material M-MP alloy Forgings and Rods. Specifications

GOST 17601-90: Marine centrifugal separators. Acceptance and methods of tests

GOST 17745-90: Steels and alloys. Methods for determination of gases

GOST 20549-75: Vacuum diffusion welding of working elements of separating and shape forming dies. Typical technological process

GOST 20806-81: Oil filter paper. Specifications

GOST 21132.0-75: Aluminium alloys. Method for determination of hydrogen content in molten metal

GOST 21132.1-81: Aluminium alloys. Measuring hydrogen content non-solid metal by solid extraction method

GOST 21132.1-98: Aluminium and aluminium alloys. Methods for determination of hydrogen in solid metal by vacuum hot extraction

GOST 21227-93: Enamels ПФ-218. Specifications

GOST 21329-75: Edge filters at pressure up to 63 bar. Specifications

GOST 21646-2003: Copper and brass tubes for heat-exchange apparatus. Specifications

GOST 21749-76: Petroleum products. The method for determination of saponification value and free fats content

GOST 22725-77: Reference high pressure manganin gauges. Technical requirements

GOST 23599-79: Enamels type ЭП-255 and ЭП-275. Specifications

GOST 24455-80: Emulsified floor polish. Test method for waterproofness

GOST 24709-81: Enamels ЭП-140. Specifications

GOST 24943-81: Engine oils. Photometric method for assessing contamination of spent oils

GOST 24956-81: Titanium and titanium alloys. Method for the determination of hydrogen

GOST 25162-82: Emulsified floor polish. Test method for wetting capacity

GOST 25374-82: Extraction bees wax. Specifications

GOST 25593-83: Diamond pastes

GOST 25821-83: Fluid PGV. Specifications

GOST 25945-98: Building polymer sealing non-hardening materials and products. Test methods

GOST 26432-85: Petroleum liquid fuels. Limited list and order of application

GOST 26829-86: Canned and preserved fish. Methods of fat determination

GOST 27896-88: Rubbers, polymer elastic materials, rubberized and elastic polymer coated fabrics. Methods for determination of fuel permeability

GOST 27953-88: Detonation coatings. General requirements

GOST 28052-97: Titanium and titanium alloys. Methods of oxygen determination

GOST 29104.12-91: Industrial fabrics. Method for determination of resistance to petroleum

GOST 2923-75: Flat glass plates for interference measurements ПИ60, ПИ80, ПИ100, ПИ120

GOST 31537-2012: Wheelset assembly for locomotives and motor-powered units using shrink fit method. Typical technological process

GOST 31923-2012: Extraction bees wax. Specifications

GOST 32683-2014: Edges material based paper impregnated with carbamide-formaldehyde resin. Specifications

GOST 396-84: Silk twisted non-sterile threads for surgery. Specifications

GOST 4095-75: Isooctane for industrial use. Specifications

GOST 4546-81: Explosives. Methods of fougasse properties definition

GOST 5398-76: Textile reinforced pressure-suction rubber hoses without fittings. Specifications

GOST 5480-59: Vegetable oils and natural fatty acids. Methods for the determination of soap

GOST 5702-75: Process lubricant SP-3

GOST 5897-90: Confectionary. Methods for determination of organoleptic quality indices, sizes, net-mass and components

GOST 5960-72: Flexible PVC for insulation and protective jackets of wires and cables. Specifications

GOST 5984-80: Explosives. Methods for determination of brisance

GOST 6037-75: Lubricating greases. Method for the determination of creeping tendency

GOST 7513-75: Object micrometer. Specification

GOST 8.003-2010: State system for ensuring the uniformity of measurements. Tool-making microscopes. Verification procedure

GOST 8.046-2010: State system for ensuring the uniformity of measurements. Optical dividing heads. Verification procedure

GOST 8.096-82: State system for ensuring the uniformity of measurements. The 1-st order micro manometers of МКМ-type. Methods and means of verification

GOST 8.113-85: State system for ensuring the uniformity of measurements. Vernier callipers. Verification methods

GOST 8.164-75: State system for ensuring the uniformity of measurements. Vernier height gauges. Methods and means for verification

GOST 8.165-75: State system ensuring the uniformity of measurement. Sine bars. Methods and means for verification

GOST 8.236-77: State system for ensuring the uniformity of measurements. Measuring knives. Methods and means of verification

GOST 8.258-2013: State system for ensuring the uniformity of measurements. Polarimeters and saccharimeters. Verification procedure

GOST 8.266-77: State system for ensuring the uniformity of measurements. Goniometers. Methods and means of verification

GOST 8.290-2013: State system for ensuring the uniformity of measurements. BU-type viscometers. Verification procedure

GOST 8.290-78: State system for ensuring the uniformity of measurements. BУ-type viscometers. Methods and means of calibration

GOST 8.335-2004: State system for ensuring the uniformity of measurements. Hardness standard blocks. Methods of verification

GOST 8.335-78: State system for ensuring the uniformity of measurements. Harness standard blocks. Methods and means of verification

GOST 8.340-78: State system for ensuring the uniformity of measurements. Dead-weight tester type МП-0,4 methods and means of verification

GOST 8.353-96: State system for ensuring the uniformity of measurements. Standard line measures of length of the first grade and working line measures of the zero accuracy class to 1 m length. Method for verification

GOST 8.376-80: State system for ensuring the uniformity of measurements. Universal instruments for measuring solvents. Methods and means of verification

GOST 8.459-82: State system for ensuring the uniformity of measurements. Pitch difference measuring instruments. Methods and means of verification

GOST 8.490-83: State system for ensuring the uniformity of measurements. Instruments for measurements of gear interaxial distance. Methods of verification

GOST 8.528-85: State system for ensuring the uniformity of measurements. Second class reference line gauges and fifth accuracy class working line gauges. Verification procedure

GOST 8608-79: Porcelain pin support insulators for voltage above 1000 V. General specifications

GOST 8756.22-80: Fruit and vegetable products. Method for determination of carotene

GOST 8904-2014: Hard wood-fibre boards varnish and paint coatings. Specifications

GOST 8904-81: Hard wood-fibre boards with varnish and paint coatings. Specifications

GOST 9.015-74: Unified system of corrosion and ageing protection. Underground constructions. General technical requirements

GOST 9.028-74: Unified system of corrosion and ageing protection. Interoperational anticorrosive protection of billets, parts and assemblies of metal products. General requirements

GOST 9.054-75: Unified system of corrosion and ageing protection. Anticorrosive oils, greases and inhibited film-forming petroleum compounds. Accelerated test methods of protective property

GOST 9.902-81: Unified system of corrosion and ageing protection. Polymeric materials. Accelerated test methods for corrosivity

GOST 9.904-82: Unified system of corrosion and ageing protection. Aluminium alloys. Accelerated test method for exfoliating corrosion

GOST 9127-59: Lubricating Grease. Methods for determination of viscosity and tensile strength with plastic viscometer

GOST 9144-79: Engine Fuels. Method for determination of thermal stability in static conditions

GOST 9151-75: Enamels of types ГФ-92. Specifications

GOST 9206-80: Diamond powders

GOST 9590-76: Laminated paper decorative plastic. Specifications

GOST R 18.12.01-2015: Technology of the aviation fuelling. Functional and technological parameters of airfield fuelling tankers (tankers). Customer requirements

GOST R 50965-96: Aluminium and aluminium alloys. Method for determination of hydrogen in solid metal

GOST R 51775-2001: Wheel sets for the special-purpose rolling stock. General specifications

GOST R 51860-2002: Products wear resistance assurance. Evaluation of lubrication materials antiwear properties by 'ball - cylinder' method

GOST R 52098-2003: Extraction bees wax. Specifications

GOST R 52597-2006: Brass rods for free machining purposes. Specifications

GOST R 52768-2007: Centrifuges for industries working with radioactive media. General technical requirements and test methods

GOST R 53191-2008: Wheelset assembly for locomotives and motor-powered units using shrink fit method. Typical technological process

GOST R 53803-2010: Copper rod for electrical purposes. Specifications

GOST R 54377-2011: Bees’ wax. Methods for determination of authenticity and drop melting point

GOST R 54567-2011: Petroleum. Requirements for chemical products ensuring their safe application in petroleum industry

GOST R 55926-2013: Edges material based paper impregnated with carbamide-formaldehyde resin. Specifications

GOST R 8.664-2009: State system for ensuring the uniformity of measurements. BU-type viscometers. Methods of calibration

GOST R 8.677-2009: State system for ensuring the uniformity of measurements. Cylindrical thread gauges. Verification procedure

GOST R 8.710-2010: State system for ensuring the uniformity of measurements. Polarimeters and saccharimeters. Verification procedure

Guideline 424: Guidelines for the construction of line structures for backbone and intra-zone cable communication lines (Sections 15-23. Appendices 1-11)

Guideline 424: Guidelines for the construction of line structures for backbone and intra-zone cable communication lines

I 1.09-10: Instructions for connecting insulated conductors of wires and cables

MI 02-00: Methods of the Institute. Reiki leveling. Methods of verification

MI 1294-86: GSE. Thickness gauge ultrasonic model KMT176M-1. Method of verification.

MI 131-77: State system for ensuring uniformity of measurements. Methods of verification and certification of model manganin resistance pressure gauges for high pressures

MI 145-77: State system for ensuring uniformity of measurements. Methodology for certification of measures of cylindricity

MI 1586-86: State system for ensuring uniformity of measurements. Catheter B-630. Method of verification

MI 1673-87: State system for ensuring uniformity of measurements. Stakes and supports for gage heads. Methods of control

MI 1724-87: Guidelines. State system for ensuring uniformity of measurements. Thickness gauge indicator with the price division of 0.01 and 0.1 mm. Method of verification

MI 1747-87: Guidelines. State system for ensuring uniformity of measurements. Mass measures exemplary and general purpose. Method of verification

MI 1758-87: Guidelines. GSE. The flat angle measures are prismatic. Method of verification

MI 1780-87: Guidelines. GSOEI. Tape exemplary and metal measuring tapes. Method of verification

MI 1790-87: State system for ensuring uniformity of measurements. Small spring measuring heads. Mixers. Verification Method

MI 1795-87: Patterns of travel control KSH gauge 1520 mm. Control method

MI 1799-87: Guidelines. Squares testing 90 degrees. Control method

MI 1812-87: Gages threaded tapered. Methods of control

MI 1813-87: Methodical instructions. State system for ensuring uniformity of measurements. Spring measuring heads. Verification Method

MI 1814-87: Guidelines. State system for ensuring uniformity of measurements. Stenkomery indicator with the price of division 0, 01 and 0.1 mm. Method of verification

MI 1850-88: State system for ensuring uniformity of measurements. Samples of surface roughness (comparison). Method of verification

MI 1863-88: Guidelines. State system for ensuring uniformity of measurements. The heads are measuring spring-optical. Opticators Method of verification

MI 1876-88: Recommendations. GSE. Multiturn indicators with a scale division of 0.001 and 0.002 mm. Method of verification

MI 1903-97: Recommendation. State system for ensuring uniformity of measurements. Standards for coating thickness. Method of verification

MI 1904-88: Threaded cylindrical gauges. Methods of control

MI 1919-88: Lever shackles. Method of verification

MI 1927-88: Recommendation. Calibers are smooth for cylindrical shafts and holes

MI 1928-88: State system for ensuring uniformity of measurements. Indicators lever and gear with the price of division of 0,01 mm. Method of verification

MI 1937-88: Gauges for taper connections. Methods of control

MI 1946-88: Methodical instructions. GSI Normalyzers. Models БВ-5045, БВ-5046, 22202. Verification procedure

MI 1958-89: State system for ensuring uniformity of measurements. Optimetry. Method of verification

MI 1976-89: Recommendation. State system for ensuring uniformity of measurements. Three-coordinate measuring machines with a measured volume of not more than 1x1x1 m3. Methodology of metrological certification

MI 1988-89: Guidelines. State system for ensuring uniformity of measurements. Zubomer. Model 23900. Method of verification

MI 2006-89: State system for ensuring uniformity of measurements. Depth gauge indicators. Verification procedure

MI 2031-89: Calibration and marking iron prisms. Methods of control

MI 2051-90: Guidelines. GSE. Lever micrometers. Method of verification

MI 2056-90: Pneumatic plugs for holes from 3 to 160 mm. Methods of control.

MI 2066-90: Sets of accessories to plane-parallel end measures of length

MI 2078-90: Wires and rollers

MI 2079-90: Measures of length plane-end exemplary 3 and 5th digits and working classes of accuracy 1-5 up to 100mm.

MI 2131-90: Goniometers with nonius

MI 2186-92: Recommendation. GSOEI. Length measures are terminal flat-parallel model 3 and 4th digits and working classes of accuracy 1 - 5 with a length in excess of 100 to 1000 mm. Method of verification

MI 218-80: State system for ensuring uniformity of measurements. Methods of calibration of devices PPM-600

MI 2190-92: State system for ensuring uniformity of measurements. Shtangenreysmasy. Method of verification

MI 2193-92: Inside calipers, with a scale division of 0.001 and 0.002 mm.

MI 2194-92: State system for ensuring uniformity of measurements. Nutromera indicator with the price of division of 0.01 mm. Methods of verification

MI 2196-92: Depth gauges

MI 2591-2000: Recommendation. State system for ensuring uniformity of measurements. Density transducers in-line firms "Те sоlа-Тrоon eleсТонісорор ЛТD" (United Kingdom). Method of verification

MI 2826-2003: Recommendation. State system for ensuring uniformity of measurements. Liquid micromanometers with terminal measures of the PMKM and MKM type. Method of verification

MI 284-82: State system for ensuring uniformity of measurements. Methodical instructions. Horizontal comparator IZA-8. Methods and means of verification

MI 4-74: State system for ensuring uniformity of measurements. Method of verification of optical lines IS-36

MI 557-84: Dead weight portable gage MPP-60 of class 0.05. Verification procedure

MI 72-75: State system for ensuring uniformity of measurements. Method of verification of optical lines of IS-43

MI 936-85: Guidelines. State system for ensuring uniformity of measurements. Measures the length of the stroke model of the 3rd category (meters-comparators). Method of verification

MI 954-85: Methodical instructions. Indicators are multi-turn. Models 05205, 05305. Verification procedure

MI 955-85: GSE. Digital raster system for linear measurements. Models 19000, 19001. Method of verification

MP 203-55-2019: Machines coordinate measuring PRIMUS L

MU 342: Methodical instructions. The device for checking PPI-3 indicators. Methods and means of verification

MU 34-70-106-85: Procedural Guidelines for Preservation of Standby Equipment of Stationary Electric Power Generating Stations

MU 5064-89: Methodological guidelines for gas chromatographic measurement of concentrations of solvent gasoline (BR-1, BR-2), fuel (aviation, shale) in the working area

MUK 4.2.577-96: Methods of microbiological control of products for children, clinical nutrition and their components

NB ZhT TsL 111-2003: Passenger cars and motorwagon rolling stock. Passenger seat. Safety standards

OST 108.020.131-85: Steam, Gas and Hydraulic Turbines. General requirements for conservation.

OST 108.988.01-82: Preservation of items of boiler production. Lubricants, inhibitors. Technical requirements.

OST 13-86-80: Metrological support of furniture production. General requirements for calibration data base and instruments. Gauges monitoring.

OST 16 0.800.365-76: Assembly wires. General specifications

OST 16-0.684.032-92: Interior electrical installation of electrical products. General technical requirements.

OST 26-07-2047-82: Pipeline fittings. Technology and methods of fastening of sealing rings from fluoroplastic-4 in gates.

OST 26-07-794-73: General purpose cryogenic pipeline fittings. General specifications.

OST 34 007-75: Zinc electrolytic protective coating. Technical conditions. Acceptance rules and control methods

OST 34-42-841-86: Organization of assembly works in nuclear thermal power plants. Assembly of thermal and mechanical equipment in nuclear thermal power plants with ВВЭР-1000 reactors. General technical requirements.

OST 35-09-86: Hoisting machinery and equipment. General specifications.

PND F 13.1.8-97: Chromatographic method for measuring the mass concentration of white spirit, gasoline and solvent in industrial emissions using a universal disposable sampler

PPBO-105-87: Fire Safety Regulations for Institutions, Organizations, and Companies Administered by the USSR Academy of Sciences

PR 32 TsSh 001-2001: Rules for metrology. Methodical instructions. Metrological support of control patterns for linear parameters of sorting slide retarders

R 50.2.023-2002: National System for Standardization of Measurements. Levels. Verification Technique

RD 059/01-2019: Instructions for welding and surfacing during the repair of freight cars (with Amendment No. 1)

RD 153-34.0-45.510-98: Model Guidelines for Operation and Repair of Slip Rings and Brushes of Turbine Generators with Power of 63 MW and Above

RD 153-34.1-17.462-00: Procedural Guidelines Assessment of Serviceability of Steam Turbine Blades in the Process of Manufacturing, Operation, and Repair

RD 26.260.15-2001: The leading document. Positive material identification of the main and welding materials and finished goods.

RD 31.11.81.36-81: Rules for the sea transportation of oil and oil products in bulk on MMF tankers

RD 31.2.07-2001: Fuels, oils, lubricants and special liquids for ships of sea transport. Nomenclature and scope

RD 31.27.03-95: Fuels, oils, lubricants and special liquids for ships of sea transport. Nomenclature and scope

RD 31.28.09-93: Ship bearing bushes with antifriction layer of tin and lead alloy. Technical requirements on materials. Typical technological processes.

RD 31.28.52-79: Methods of physico-chemical control of the working environments of ship equipment

RD 31.55.03.07-86: Restoration of cast-iron diesel pistons D100 surfacing. Typical Processes

RD 31.6.07-2002: Instructions for maintenance of navigation equipment of marine approach channels and harbour areas.

RD 32 TsV 137-2013: Calibration Method for Combined Pattern No. 2

RD 32 TsV 156-2015: Methods of controlling the overstatement and understatement of the friction wedge using the T1434.00.000 device

RD 32 TsV 157-2015: Calibration procedure for the T1434.00.000 fixture to control overstatement and understatement of the friction wedge

RD 32 TsV 162-2015: The technique for establishing the rejection zone of peaked rolling of the crest of wheel sets of freight cars with the help of tool T1436.000

RD 32 TsV 163-2015: Calibration procedure for the T1436.000 device for establishing the rejection zone for the peaked roll of the ridge of freight cars

RD 34.10.351: Specified Quantity Allowances for Materials for Repair of Turbine Generators

RD 34.10.353: Specified Quantity Allowances for Materials for Repair of Electric Motors

RD 34.20.506-84: Typical operating and repair instructions for complete switchgears 6 - 10 kV

RD 34.30.605: Process instruction for replacement of steam turbine blades

RD 34.41.202: Guidelines for Installation of Feed Pumps for Units with Turbines Types K-300-240, K-500-240 and T-250/300-240

RD 34.44.215-96: Methods for the Determination of Quality of Water-Fuel Oil Emulsions Used n the Form of Liquid Boiler Fuel

RD 34.45.614: Guide to Overhaul of Turbine Generators TVF-120-2 and TVF-100-2

RD 34.47.602-75: Guidelines for the overhaul of the VMD-35 oil circuit breaker

RD 34.47.612-86: Guidelines for the overhaul of VT-35-630-10VI and VTD-35-630-10VI oil circuit breakers

RD 34.47.613-74: Guidelines for the overhaul of the oil circuit breaker VMP-10P

RD 39-30-657-81: Guidance on the mechanochemical preparation of the inner surface of pipelines for protective coatings applied in the field

RD 39-3-944-83: Standard provision for a laboratory that performs oil analyzes during acceptance operations and produced water

RD 50-290-81: Procedural Guidelines. Instruments for Analysis of Sulfur Content in Oil. Verification Methods and Means

RD 50-294-81: Guidelines. Vibration density meter. Methods and means of verification

RD 50-366-82: Methodological instructions. Falling sphere Geppler viscometer. Methods and means of verification.

RD 50-416-83: Methodological instructions. Glass capillary sample viscometers. Methods and means of verification.

RD 52.68-137-87: Unified industry norms for the consumption of materials and spare parts for the repair and operation of communications (telegraph and fax equipment)

RD 52.68-137-87: Unified industry norms for the consumption of materials and spare parts for the repair and operation of communications (telegraph and fax equipment)

RTM 68-14.33-91: Manufacturing technology of plastic globes with a diameter of 210 mm

Rules on the Selection of Pressure Vessels and Equipment: Instruction on the selection of pressure vessels and devices operating under pressure of 100 kgf/cm2 and overpressure protection, Ministry of Petroleum Energy

SNiP II-45-75: Main pipelines

SO 153-34.17.462-2003: Instructions on how to assess the performance of steam turbine blades in the process of manufacturing, operation and repair

ST SSFZhT TsT-TsP 103-2003: Locomotives, engine wagon and special self-propelled rolling stock of railways. The driver's seat. Test methods for sanitary-chemical indicators

ST TsKBA 055-2008: Pipe fittings. Valves valves with fluoroplast-4 seal and composite materials. Technical requirements and methods of mounting the sealing rings

ST TsKBA 061-2010: Pipe fittings. Temporary anti-corrosion protection. General requirements for the choice of means and methods of protection

TU 16-503.016-67: Electrical insulating adhesive tape on a polycassin compound

TU 16-705.492-2005: Round electrotechnical copper wire. Technical conditions

TU 34-38-20140-94: Valves of gas pipelines TPP. General technical conditions for major repairs

TU 34-38-20365-94: Power valves. General technical conditions for major repairs

TU 38 0051166-98: Rubber compounds for the rubber products of aircraft

TU 6-10-1052-75: Enamel VL-515 red-brown

TU 95 1613-01: Polyethylene heat shrink tubes. Technical conditions

VNTP 05-97: Definition of categories of premises and buildings of enterprises and objects of railway transport according to explosion and fire hazard

VNTP 4-00: Determination of explosion and fire hazard classes of premises, buildings and outdoor installation of oil products pipeline transportation facilities

VSN 008-88: Construction of trunk and field pipelines. Anticorrosion and heat insulation

VSN 176-78: Guidelines for the Design and Installation of Corrugated Metal Pipe Culverts

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Heating, Ventilation and Air Conditioning (HVAC)
Language: English
Price: $430.00
imgalt
Technical regulations of Customs Union. On safety of rolling stock
Language: English
Price: $181.30
imgalt
Goat whole drinking milk. Specifications
Language: English
Price: $168.00
imgalt
Loads and impacts
Language: English
Price: $306.00
imgalt
Seamless steel pipes for steam boilers and pipelines
Language: English
Price: $581.17
imgalt
Conformity assessment system in the field of atomic energy use. Conformity assessment in the form of control. Unified techniques. Capillary control
Language: English
Price: $226.00
imgalt
Conformity assessment system in the field of atomic energy use. Conformity assessment in the form of control. Unified techniques. Visual and measuring control
Language: English
Price: $348.00
imgalt
Pipe fittings. Passport. Rules for development and design
Language: English
Price: $254.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!