GOST 13861-89
ГОСТ 13861-89
|
|
Pressure regulators for the flame machining
Редукторы для газопламенной обработки. Общие технические условия
Status: Effective. The limitation of effectiveness has been lifted: Protocol No. 5-94 of the IGU dated 05.17.94 (IUS 11-12-1994)
The standard applies to gas pressure regulators used to reduce the pressure of working gases entering the pressure regulator from a cylinder, ramp or gas pipeline of a distribution manifold, and automatically maintaining a constant specified pressure of these gases when feeding posts and gas welding, cutting, soldering, welding, heating and other processes of flame treatment and manufactured for the needs of the national economy and export. The standard does not apply to gearboxes that are integral parts of machines and installations.
Стандарт распространяется на газовые редукторы, используемые для понижения давления рабочих газов, поступающих в редуктор из баллона, рампы или газопровода распределительного коллектора, и автоматического поддержания постоянным заданного рабочего давления этих газов при питании постов и установок газовой сварки, резки, пайки, наплавки, нагрева и других процессов газопламенной обработки и изготовляемые для нужд народного хозяйства и экспорта. Стандарт не распространяется на редукторы, являющиеся составными частями машин и установок.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstandart of the USSR,
12/25/1989
SKU: RUSS17961
The Product is Contained in the Following Classifiers:
Welding regulations »
Welding work »
Welding regulations »
Welding materials »
Welding regulations »
welding equipment »
Welding regulations »
Documentation »
Welding regulations »
Non-destructive control »
Welding regulations »
Heat treatment »
Welding regulations »
Welding work »
Surfacing »
Welding regulations »
Welding materials »
Gases »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
010/2011 TR CU. On safety of machinery and equipment »
Regulations and standards (to ТР ТС ТС 010/2011) »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.13 Testing and control of products of engineering industry »
4.13.2 Machines and equipment for special purposes »
4.13.2.12 Equipment for production of electrical products and materials and electro-physical processing of materials »
ISO classifier »
25 MECHANICAL ENGINEERING »
25.160 Welding, brazing and hard soldering »
25.160.30 Welding equipment »
National standards »
25 MECHANICAL ENGINEERING »
25.160 Welding, brazing and hard soldering »
25.160.30 Welding equipment »
National Standards for KGS (State Standards Classification) »
Latest edition »
G Machines, equipment and tools »
G8 Machinery and equipment of universal application »
G85 Equipment for autogenous welding and cutting »
National Standards for OKSTU »
CHEMICAL AND PETROLEUM ENGINEERING »
Equipment and apparatus for gas-flame processing of metals and metallization of products »
As a Replacement Of:
GOST 13861-80: Pressure regulators for the flame machining. General specifications
GOST 6268-78: Pressure regulators for the flame machining. Types and main parameters
The Document References:
GOST 12.2.008-75: Equipment and facilities for gas-flame treatment of metals and thermal
GOST 12.2.052-81: Occupational safety standards system. Equipment working with gaseous oxygen. General safety requirements
GOST 14192-77: Marking of cargoes
GOST 14192-96: Cargo marking
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 15151-69: Machines, instuments and other industrial products for tropics. General specifications.
GOST 23170-78: Packing for products of engineering industry. General requirements.
GOST 24597-81: Unitized tared and piece goods cargoes. Main parameters and dimensions
GOST 26663-85: Transport packets. Formation by packaging means. General technical requirements
GOST 3282-74: General-purpose low-carbon steel wire. Specifications
GOST 3560-73: Sealing tepe
GOST 9570-84: Box and post pallets
The Document is Referenced By:
FR 1.31.2004.01259: Methods for measuring the mass concentration of organic substances (27 compounds) in industrial emissions and air of the working area by gas chromatography using the universal reusable AUV sampler 0.005.169 MVI
GOST 10679-2019: Liquefied hydrocarbon gases. Method for the determination of hydrocarbon composition
GOST 12.2.008-75: Equipment and facilities for gas-flame treatment of metals and thermal
GOST 12.3.036-84: Occupational safety standards system. Flame machining of metals. Safety requirements
GOST 20944-75: Liquids for aircrafts systems. Method for determination thermo oxidizing stability and corrosion activity
GOST 21058-75: Aviation hydraulic fluids and lubrication oils. Method for determination of foaming characteristics
GOST 23740-79: Soils. Methods of laboratory determination of organic composition
GOST 23862.6-79: Rare-earth metals and their oxides. Methods of determination of sodium, potassium and calcium
GOST 24676-2017: Pentanes. Method for determination of hydrocarbon composition
GOST 26449.1-85: Stationary distillation desalting units. methods of saline water chemical analysis
GOST 26931-86: Raw materials and food-stuffs. Method for determination of copper
GOST 26932-86: Raw materials and food-stuffs. Methods for determination of lead
GOST 26933-86: Raw materials and food-stuffs. Methods for determination of cadmium
GOST 26934-86: Raw materials and food-stuffs. Method for determination of zinc
GOST 31371.7-2008: Natural gas. Determination of composition with defined uncertainty by gas chromatography method. Part 7. Measurement procedure of the mole fraction of components
GOST 31596-2012: Gas tightness of equipment and apparatus for gas welding, cutting and allied processes. Permissible rates of external gas leakage and measuring procedures
GOST 31628-2012: Food-stuffs and food raw materials. Anodic stripping voltammetric method of arsenic mass concentration determination
GOST 31660-2012: Foods. Anodic stripping voltammetric method of iodine mass concentration determination
GOST 31866-2012: Drinking water. Determination of elements content by stripping voltammetric method
GOST 32938-2014: Cosmetics. Inversion-voltammetry method for determination of arsenic
GOST 33012-2014: Propane and butane for sale. Determination of the hydrocarbon composition by gas chromatography
GOST 5457-75: Dissolved acetylene and gaseous acetylene for technical purposes. Specifications
GOST 5494-2022: Aluminum powder. Technical specifications
GOST 8.616-2013: State system for ensuring the uniformity of measurements. Laboratory and stream chromatographs for control of component composition Liquefied hydrocarbon fuel gases. The method of verification
GOST 8050-85: Carbon dioxide,
GOST 9827-75: Additives and additive containing oils. Method for determination of phosphorus
GOST R 50379-92: Gas tightness of equipment and apparatus for gas welding, cutting and applied processes. Permissible rates of external gas leakage and measuring procedures
GOST R 50402-2011: Equipment used in gas welding, cutting and allied processes. Safety devices for fuel gases and oxygen or compressed air. Technical requirements and tests
GOST R 50402-92: Safety devices for fuel gases and oxygen or compressed air for gas welding, cutting and allied processes. Definitions, general requirements and testing methods
GOST R 50629-93: Special form radioactive material. General technical requirements and test methods
GOST R 51301-99: Food-stuffs and food raw materials. Anodic stripping voltammetric methods of toxic traces elements determination (cadmium, lead, copper and zinc)
GOST R 51962-2002: Food-stuffs and food raw materials. Anodic stripping voltammetric method of arsenic concentration determination
GOST R 52180-2003: Drinking water. Determination of elements content by stripping voltammetric method
GOST R 52315-2005: Non-alcoholic beverages. Mineral and drinking water. Stripping voltammetric method of selenium mass concentration determination
GOST R 52689-2006: Foods. Anodic stripping voltammetric method of iodine mass concentration determination
GOST R 52690-2006: Foods. Voltammetric method of vitamin C mass concentration determination
GOST R 53367-2009: Combustible natural gas. Determination of sulphur-containing components using chromatographic method
GOST R 54484-2011: Liquefied hydrocarbon fuel gases. Method for determination of hydrocarbon composition
GOST R 56835-2015: Liquefied natural gas. Boil-off gas of liquefied natural gas production. Determination of composition by gas chromatography method
GOST R 57851.1-2017: Gas-condensate mixture. Part 1. Separation gas. Compositional analysis by gas chromatography method
GOST R 57851.2-2017: Gas-condensate mixture. Part 2. Unstable gas condensate. Compositional analysis by gas chromatography method with preliminary sample degasification
GOST R 57851.3-2017: Gas-condensate mixture. Part 3. Unstable gas condensate. Compositional analysis by gas chromatography method without preliminary sample degasification
GOST R 57975.1-2017: Associated oil gas. Determination of composition by gas chromatography method. Part 1. Determination of hydrocarbons C1-C8+ and inorganic gases content by flame ionization detector and thermal conductivity detector
GOST R 57975.2-2017: Аssociated oil gas. Determination of composition by gas chromatography. Part 2. Determination of sulfur compounds using flame photometric detector
IBJaL.413411.058 MP: Gas analyzers ANKAT-7631Mikro. Verification Method
IM 14-12-2004: Automation. Instruments for measuring and regulating pressure and vacuum. Nomenclature directory
M 10: Method for determination of chlorine-containing organic compounds (methylene chloride, chloroform, dichloroethane, carbon tetrachloride, epichlorohydrin, trichlorethylene, tetrachlorethylene), and also acetaldehyde and acrylonitrile in industrial emission
M 22: Methods for measuring the mass concentration of organic substances (33 compounds) in industrial emissions into the atmosphere, in the air of the working area and in atmospheric air by gas chromatography
Manual for SNiP 3.05.01-85: Manual for the production and acceptance of work when installing ventilation and air conditioning systems
MI 485-84: Guidelines. Microsyringe "Gazokhrom 101". Methods and means of verification
MU 08-47/039: Methods of quantitative chemical analysis of samples of vegetable and fruit juices, compotes, products of their processing for the content of tin and lead by inversion voltammetry
MU 08-47/114: Automobile gasolines. Inversion voltammetric method for determining the mass concentration of lead
MU 08-47/132: Food raw materials and food products. Voltammetric method for measuring the mass concentration of selenium
MU 08-47/136: Food products and food raw materials. Inversion voltammetric methods for determining the content of toxic elements (cadmium, lead, copper and zinc)
MU 08-47/145: Kids toys. Inversion voltammetric method for determining the mass concentrations of toxic elements (arsenic, mercury, selenium, cadmium, lead and antimony)
MU 08-47/147: Surface, natural, drinking and waste water. Inversion voltammetric method for determining the mass concentration of aniline
MU 08-47/151: Cosmetic preparations and decorative cosmetics. Inversion voltammetric method for measuring the mass concentration of zinc, cadmium, lead and copper
MU 08-47/154: Vegetable and fruit juices, compotes, processed products of vegetables and fruits. Inversion voltammetric method for measuring mass concentrations of tin and lead
MU 08-47/155: Alcoholic drinks. Inversion voltammetric method for measuring the mass concentration of cobalt
MU 08-47/156: Alcoholic drinks. Inversion voltammetric method for measuring the mass concentration of nickel
MU 08-47/157: Milk and dairy products. Inversion voltammetric method for measuring the mass concentration of cobalt
MU 08-47/158: Vegetables, fruits and their products. Stripping voltammetric methods for determining mass concentrations of arsenic and mercury
MU 08-47/159: Cosmetic preparations. Inversion voltammetric method for measuring the mass concentration of mercury
MU 08-47/160: Milk and dairy products. Inversion voltammetric method for measuring the mass concentration of mercury
MU 08-47/162: Natural, drinking and treated sewage. Voltammetric method for measuring the mass concentration of mercury
MU 08-47/167: Fish, seafood, non-fish fishing objects and products produced from them. Voltammetric method for measuring the mass concentration of mercury
MU 08-47/168: Alcoholic and non-alcoholic drinks. Voltammetric method for measuring the mass concentration of mercury
MU 08-47/169: Canned food. Voltammetric method for measuring the mass concentration of tin and lead
MU 08-47/174: Natural, drinking and treated sewage. Voltammetric method for measuring mass concentrations of manganese, antimony and bismuth
MU 08-47/175: Food products and food raw materials. Inversion voltammetric method for determining the mass concentration of arsenic
MU 08-47/176: Drinking water, natural, technological and treated sewage. Inversion voltammetric method for determining the mass concentration of arsenic
MU 08-47/178: Drinking water, mineral, natural. Voltammetric method for measuring the mass concentration of nitrate ions
MU 08-47/187: Natural, drinking and treated sewage. Voltammetric method for measuring mass concentrations of nickel
MU 08-47/188: Fatty foods. Voltammetric method for measuring mass concentrations of nickel
MU 08-47/189: Natural, drinking, technologically clean, purified waste water. Voltamperometric method for measuring phenol mass concentrations
MU 08-47/196: Meat and meat products. Inversion voltammetric method for measuring the mass concentration of mercury
MU 08-47/203: The soil. Method for measuring mass concentrations of zinc, cadmium, lead, copper, manganese, nickel, cobalt, iron, arsenic, selenium and mercury by inversion voltammetry
MU 08-47/206: Food products and food raw materials. Voltammetric method for measuring the mass concentration of iodine
MU 08-47/220: Bioobjects (hair). Inversion voltammetric method for measuring mass concentrations of manganese, antimony and bismuth
MU 08-47/221: Vegetable raw materials, extracts and drinks based on it. Voltammetric method for measuring the mass concentration of selenium forms
MU 08-47/222: Breast milk. Inversion voltammetric method for measuring mass concentrations of elements and vitamins
MU 08-47/229: Sugar. Inversion voltammetric method for measuring the mass concentration of mercury
MU 31-14/06: Quantitative chemical analysis of samples of natural, drinking, waste water and technological aqueous solutions. Methodology for measuring mass concentrations of nickel and cobalt by inversion voltammetry on TA-type analyzers
MU 31-18/06: Quantitative chemical analysis of soil samples, greenhouse soils, silts, bottom sediments, sapropels, solid waste. Methodology for measuring mass concentrations of nickel and cobalt by inversion voltammetry on TA-type analyzers
MUK 4.1.617-96: Methodological guidelines for gas chromatographic determination of xylenols, cresols and phenol in atmospheric air
OST 2 N83-44-80: Occupational safety standards system. Arc and electroslag welding. Safety requirements
OST 2 N83-45-80: Occupational safety standards system. Contact welding. Safety requirements
OST 2 N83-46-80: Occupational safety standards system. Oxygen cutting. Safety requirements
OST 2 Н83-44-80: Occupational safety standards system. Electric arc welding and slag welding. Safety requirements.
OST 2 Н83-45-80: Labour safety standard system. Contact welding. Safety requirements.
OST 2 Н83-46-80: Labour safety standard system. Oxygen cutting. Safety requirements.
OST 36-79-83: Steel process pipes of carbon and low alloy steels Pi up to 10 MPa (100 kgs/cm2). Semi-automatic welding with consumable electrode in carbon dioxide. Typical process.
POT R M-019-2001: Intersectoral rules for labor protection in the production of acetylene, oxygen, the process of spraying and gas-plasma processing of metals
RD 059/01-2019: Instructions for welding and surfacing during the repair of freight cars (with Amendment No. 1)
RD 34.03.204: Safety rules when working with tools and accessories
RD 34.10.103: Industry-Specific Specified Quantity Allowance for Tools, Equipment, Materials, and Aids for Repair and Rehabilitation of Gas Cleaning Equipment of Thermal Electric Powers
ST RK 2486-2014: Protection of Nature. drinking water, natural, clean technology, waste, treated waste. Determination of mass concentration of cobalt, tin, and lead by stripping voltammetry
ST RK 2487-2014: Protection of Nature. drinking water, natural, clean technology, waste, treated waste. Determination of mass concentration of potassium, selenium and silver by stripping voltammetry
ST RK GOST R 51301-2005: Food products and food staples. Inversion voltampermetric methods of determination of toxic components (cadmium, lead, copper and zinc) -
ST RK STB 1315-2008: Canned food. Method for determination of tin and lead content by stripping voltammetry using TA analyzers
STB 1313-2002: Foodstuffs and food raw materials. Method for determining the content of toxic zinc, cadmium, lead and copper elements by anodic stripping voltammetry on the TA analyser
STB 1314-2002: Milk and milk products. Method for determining the content of toxic zinc, cadmium, lead and copper elements by anodic stripping voltammetry on the TA analyser
STB 1315-2002: Canned products. Method for determining the content of stannum and lead by anodic stripping voltammetry on the TA analyser
TU 26-05-108-88: Acetylene mobile generators of continuous action with a capacity of up to 3 m3
VSN 104-93: Design and Installation Standards for Waterproofing for Subway Tunnels Constructed Using Opencast Method
Customers Who Viewed This Item Also Viewed:
|
Limit dimension deviation from 0,1 to 10000 mm and surface shape and arrangement allowances, not specified on drawings.
Language: English |
Rules of development, coordination, approval and composition of technical and economic assessment for construction
Language: English |
Mineral fertilizers. Method for determination of dynamic strength and attrition
Language: English |
Diesel fuel EURO. Specifications
Language: English |
Inch thread with a profile angle of 55 degrees
Language: English |
Vessels and apparatus. Norms and methods of strength calculation. General requirements
Language: English |
Norms of structural design of nuclear power plants with reactors of different types
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.