GOST 5761-74
ГОСТ 5761-74
|
|
Valves for nominal pressure
Клапаны на условное давление ру<= 25 МПа (250 кгс /см2) общие технические условия
Status: Not effective - Superseded
The standard applies to shut-off and regulating stuffing and bellows valves and shut-off valves for general industrial use. The standard does not apply to valves lined, cryogenic, and non-metallic.
Стандарт распространяется на запорные и регулирующие сальниковые и сильфонные вентили и запорные клапаны общепромышленного назначения. Стандарт не распространяется на вентили футерованные, криогенные, и неметаллические.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstandart of the USSR,
3/14/1974
SKU: RUSS18026
The Product is Contained in the Following Classifiers:
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.13 Testing and control of products of engineering industry »
4.13.1 Machinery, equipment and components for general engineering applications »
4.13.1.1 Components and assembly units for general engineering applications »
ISO classifier »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.060 Pipe fittings »
National standards »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.060 Pipeline valves »
ISO classifier »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.060 Pipe fittings »
23.060.01 Pipe fittings in general »
National standards »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.060 Pipeline valves »
23.060.01 Pipe fittings in general »
National Standards for KGS (State Standards Classification) »
Latest edition »
G Machines, equipment and tools »
G1 General parts and units of machines »
G18 Fittings and pipeline connections »
The Document is Replaced With:
GOST 5761-2005: Valves for nominal pressure at most PN 250. General specifications
As a Replacement Of:
GOST 5761-65: Pipeline valves for general purposes. The valves for conditional pressure Pd are less than or equal to 200 kgf / cm2. Technical requirements
GOST 8436-67: Stainless steel pressure valves up to 100 kgf / cm2. Basic dimensions
The Document References:
GOST 10198-91: Wooden boxes for weights of mass over 200 up to 20000 kg. General specifications
GOST 12.2.063-81: Occupational safety standards system. Industrial pipeline valves. General safety requirements
GOST 12815-80: Flanges for valves, fittings and pipelines for Pnom from 0,1 to 20 MPa (from 1 to 200 kgf/sq sm). Types. Connecting dimensions and dimensions of sealing surfaces
GOST 14192-96: Cargo marking
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 16504-81: The state system of testing products. Product test and quality inspection. General terms and definitions
GOST 17433-80: Industrial purity. Compressed air. Grades of contamination
GOST 24856-81: Industrial pipeline fittings. Terms and definitions
GOST 25670-83: Basic norms of interchangeability. Limit deviations of dimensions without tolerance indication
GOST 26304-84: Industrial pipeline valves supplied
GOST 2822-78: Threaded ends of marine valves and fittings. Types, main characteristics and dimensions and technical requirements
GOST 28743-93: Solid mineral fuel. Methods for determination of nitrogen
GOST 2874-82: Drinking water. Hygienic requirements and quality control
GOST 2991-85: Wooden uncollapsible cases for weights up to 500 kg. General specifications
GOST 30893.1-2002: Basic norms of interchangeability. General tolerances. Limit deviations for linear and angular dimensions without tolerance indications
GOST 3326-86: Stop valves, check lift and swing valves. Overall dimensions
GOST 356-80: Valves and details for piping. Pressures conditional, test and operational. Lines.
GOST 4666-75: Valves. Marking and distinctive painting
GOST 5890-78: Pipe connection with screwed ends. Specifications
GOST 6527-68: Female ends with pipe cylindrical thread. Dimensions
GOST 7505-89: Steel stamping forgings. Tolerances, allowances and forging laps
GOST 8479-70: Structural carbon and alloy steel forgings
GOST 8908-81: Basic norms of interchangeability. Standard angles and angle tolerances
GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements
GOST 9.302-88: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Control methods
GOST 9012-59: Metals. Method of Brinell hardness measurement
GOST 9013-59: Metals. Method of measuring Rockwell hardness
GOST 9142-90: Boxes of corrugated board. General specifications
GOST 9697-87: Stop valves. Main parameters
GOST R 51232-98: Drinking water. General requirements for organization and quality control methods
The Document is Referenced By:
GOST 10421-75: Bellows locking shut-off valves for Pp approximately equal to 1 MPa (10 kgf / cm2)
GOST 11471-72: Gate valves flanged from malleable cast iron with a cap on the thread for ammonia for Pd approximately 2.5 MPa (25 kgf / cm2). Technical conditions
GOST 12.2.063-81: Occupational safety standards system. Industrial pipeline valves. General safety requirements
GOST 14022-78: Anhydrous hydrogen fluoride. Specification
GOST 18161-72: Gearboxes made of malleable cast iron Pd approx. 1,6 MPa (16 kgf/cm2). Specification
GOST 18162-72: Shut-off valves made of malleable iron for Pd approximately 1.6 MPa (16 kgf / cm2). Specification
GOST 18163-72: Flanged stop valves from malleable iron for Pd approximately 2.5 and 4 MPa (25 and 40 kgf / cm2). Specification
GOST 19192-73: The check valves, of steel flanged and welded to Pd approximately equal to 4 MPa (40 kgf / cm2). Specification
GOST 20294-74: Acid-proof steel straightway top valves with for Pnom 1,6 mpa (16 kgf/cm2)
GOST 22446-77: Shut-off valves made of corrosion protection iron for Pd approximately 1.6 MPa (16 kgf / cm2). Specification
GOST 23229-78: Shut-off valves made of corrosion-resistant steel for Pd 4 MPa (40 kgf / cm2). Specification
GOST 23230-78: Shut-off valves made of steel for Pd are approximately 16.0 MPa (160 kgf / cm2). Specification
GOST 24694-81: Reinforced concrete T-joint of flumed irrigation systems. Specifications
GOST 4609-49: Filling-draining equipment for flammable and highly inflammable liquids. Single filling-draining standpipe with manual pump
GOST 4610-49: Filling-draining equipment for flammable and highly inflammable liquids. Powered single filling-draining standpipe
GOST 5761-2005: Valves for nominal pressure at most PN 250. General specifications
GOST 9086-74: Shut-off valves, coupling brass at Pd = 1.0 and 1.6 MPa (10 and 16 kgf / cm2). Specification
GOST 9697-87: Stop valves. Main parameters
GOST 9698-86: Gate valves. Main parameters
NB ZhT TsT 05-98: Diesel engines of locomotives and self-propelled trains. Safety Regulations
NPB 154-96: Fire valves. Basic Indexis. Test Methods
OIT-0013-2000: Nomenclature of equipment, products and technologies for nuclear installations, radiation sources and storage facilities, subject to mandatory certification in the System of certification of equipment, products and technologies for nuclear installations,
RD 34.39.201: Guidelines for Installation of Steam and Water Piping Systems in Thermal Power Stations
RD 39-0148306-413-88: Method for calculating fugitive emissions from gas processing plants
SNiP I-G.8-66: Gas Supply. Indoor Installations. Materials, Equipment, Fittings, Parts, and Devices
ST TsKBA 036-2007: Pipe fittings. Tables of figures and legend. Directory
TU 26-01-355-80: Electrolyzers. Type of SPP with component equipment
TU 26-05-108-88: Acetylene mobile generators of continuous action with a capacity of up to 3 m3
|
Customers Who Viewed This Item Also Viewed:
 |
Liquid lubricating and plastic materials. Method of test for lubricating properties on four ball machine
Language: English |
Armour clothes. Classification and general technical requirements
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Food products. Methods for detection and quantity determination of coliformes
Language: English |
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English |
Hotels design
Language: English |
Railroad rails. General specifications
Language: English |
Potassium chloride
Language: English |
Controllers acting without
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
