GOST R 52283-2004

ГОСТ Р 52283-2004

Fire-fighting centrifugal pumps. General technical requirements. Test methods

Насосы центробежные пожарные. Общие технические требования. Методы испытаний

Status: Effective - Introduced for the first time

This standard establishes normal conditions and nominal performance of power and drive gas turbines

Настоящий стандарт распространяется на центробежные пожарные насосы (нормального давления, высокого давления, комбинированные), предназначенные для подачи воды и водных растворов пенообразователей температурой до 303 К (30 град. С) с водородным показателем от 7 до 10,5 рН плотностью до 1100 кг.м в ст. минус 3 и массовой концентрацией твердых частиц до 0,5% при их максимальном размере 3 мм. Насосы используются для установки в закрытых отсеках пожарных автомобилей, пожарных катеров, передвижных пожарных установок, в которых во время работы обеспечивается положительная температура

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 20

Approved: Federal Agency for Technical Regulation and Metrology, 12/15/2004

SKU: RUSS18068

Price: $127.00




The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 13 Environmental protection, protection of people from environmental exposure. Security »

PromExpert » SECTION III. LABOR PROTECTION AND SAFETY » IV Fire safety » 3 Fire safety equipment »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.13 Testing and control of products of engineering industry » 4.13.1 Machinery, equipment and components for general engineering applications » 4.13.1.3 Pumps and compressor equipment »

ISO classifier » 13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY » 13.220 Fire protection » 13.220.10 Fire fighting »

National standards » 13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY » 13.220 Fire protection » 13.220.10 Fire fighting »

National Standards for KGS (State Standards Classification) » Latest edition » G Machines, equipment and tools » G8 Machinery and equipment of universal application » G88 Fire fighting vehicles, equipment and inventory »

National Standards for OKSTU » CONSTRUCTION, ROAD AND UTILITY ENGINEERING PRODUCTS » Fire fighting equipment »


The Document is Replaced With:

GOST R 52283-2019: Fire fighting equipment. Centrifugal fire pumps. General technical requirements. Test methods

The Document References:

GOST 10549-80: Screw thread runout. Washout threads, total thread runouts, undercuts and chamfers

GOST 12.2.033-78: Operators location in a standing position General ergonomic requirements

GOST 12.2.037-78: Fire engineering. Safety requirements

GOST 1412-85: Flakish graphite cast iron

GOST 14192-96: Cargo marking

GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence

GOST 1583-93: Aluminium casting alloys. Specifications

GOST 16093-2004: Basic norms of interchangeability. Metric screw thread. Tolerances. Clearance fits

GOST 16504-81: The state system of testing products. Product test and quality inspection. General terms and definitions

GOST 17187-2010: Noise meters Part 1 Technical requirements

GOST 2.601-2006: Unified system for design documentation. Exploitative documents

GOST 2.601-95: Operational documents

GOST 21752-76: Man-machine system Control hand wheels and steering wheels General ergonomic requirements

GOST 21753-76: Man -machine system control levers

GOST 24634-81: Wooden boxes for export products. General specifications

GOST 24705-2004: Вasic norms of interchangeability. Metric screw thread. Basic dimensions

GOST 26.020-80: Types for means of measuring and automation. Inscription and main dimensions

GOST 2991-85: Wooden uncollapsible cases for weights up to 500 kg. General specifications

GOST 493-79: Tin-free foundry bronzes. Grades

GOST 6134-2007: Rotodynamic pumps. Test methods

GOST 613-79: Tin foundry bronzes. Grades

GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements

GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations

GOST 9.301-86: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. General requirements

GOST 9150-2002: Basic norms of interchangeability. Metric screw threads. Profile

GOST 977-88: Steel castings. General specifications

GOST R 1.0-92: State system for standardization of the Russian Federation. Basic principles

GOST R 1.2-92: State system for standardization of the Russian Federation. Procedure for developing state standards

GOST R 50588-2012: Foaming agents for fire extinguishing. General technical requirements and test methods

GOST R 53279-2009: Fire equipment. Fire connecting heads. General technical requirements. Methods of testing

RD 50-204-87: Procedural Guidelines. Equipment Reliability. Gathering and Processing Data on In-Service Reliability of Articles. Basic Provisions

The Document is Referenced By:

Decision 200: On the list of international and regional (interstate) standards, and in their absence - national (state) standards, the application of which on a voluntary basis ensures compliance with the requirements of the technical regulations of the Eurasian Economic Union "On requirements for means of fire safety and fire fighting" (TR EAEC 043/2017), and the list of international and regional (interstate) standards, and in their absence - national (state) standards, containing rules and meters

Order 1317: The list of documents in the field of standardization, as a result of which, on a voluntary basis, compliance with the requirements of the Federal Law of July 22, 2008 No. 123-FZ "Technical Regulations on Fire Safety Requirements" is ensured

Order 1573: The list of national standards and sets of rules, as a result of which, on a voluntary basis, compliance with the requirements of the Federal Law of July 22, 2008 No. 123-FZ "Technical Regulations on Fire Safety Requirements" is ensured

Order 832: The list of documents in the field of standardization, as a result of which, on a voluntary basis, compliance with the requirements of the Federal Law of July 22, 2008 No. 123-FZ "Technical Regulations on Fire Safety Requirements" is ensured

Customers Who Viewed This Item Also Viewed:

Man-machine system. Operator's arm-chair. General ergonomic requirements
Language: English
Price: $73.00
Traction railway stock wheelsets of 1520 mm gauge railways. General specifications
Language: English
Price: $137.00
Safety of machinery. Guards. General requirements for the design and construction of fixed and movable guards
Language: English
Price: $332.00
Safety of machinery. Interlocking devices associated with guards. Principles for design and selection
Language: English
Price: $436.00
Seismic building design code
Language: English
Price: $594.00
Conformity assessment. The procedure for conducting inspection control in certification procedures
Language: English
Price: $491.82

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!