imgalt

GOST 20060-83

ГОСТ 20060-83

Combustible natural gases. Methods for determining water vapor content and dew point of moisture

Газы горючие природные. Методы определения содержания водяных паров и точки росы влаги

Status: Effective. The limitation of effectiveness has been lifted: Protocol No. 2-92 of the IGU dated 05.10.92 (IUS 2-1993)

The standard applies to natural hydrocarbon gases coming from field gas treatment plants and gas processing plants to gas pipelines, gases transported through gas pipelines and supplied to consumers, and establishes three methods for determining the amount of water vapor and moisture dew point: condensation, electrolytic and absorption. The standard does not apply to natural gases coming from plants where methanol and other soluble alcohols are used as an absorbent for condensation and electrolytic methods.

Стандарт распространяется на природные углеводородные газы, поступающие с промысловых установок подготовки газа и газоперерабатывающих заводов в газопроводы, газы, транспортируемые по магистральным газопроводам и поставляемые потребителям, и устанавливает три метода определения количества водяных паров и точки росы влаги: конденсационный, электролитический и абсорбционный. Стандарт не распространяется на природные газы, поступающие с установок, где в качестве абсорбента используется метанол и другие растворимые спирты для конденсационного и электролитического методов.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Gosstandart of the USSR, 7/14/1983

SKU: RUSS18072

Price: $102.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 75 Extraction and processing of oil, gas and related production »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.2 Testing and control of products of fuel and energy industry » 4.2.2 Oil, oil products and gas »

ISO classifier » 75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION » 75.060 Natural Gas »

National standards » 75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION » 75.060 Natural Gas »

National Standards for KGS (State Standards Classification) » Latest edition » B Oil products » B1 Liquid and gaseous fuel » B19 Test methods. Packaging. Marking »

National Standards for OKSTU » OIL, PETROLEUM PRODUCTS, GAS » Combustible natural and artificial gas, gas condensate, helium, oil refining and pyrolysis gas, products of gas processing plants »


The Document is Replaced With:

GOST 20060-2021: Natural gas. Determination of dew point temperature by water

As a Replacement Of:

GOST 20060-74: Combustible natural gases. Method for determination of water vapor content and dew point of moisture

The Document References:

GOST 10157-79: Gaseous and liquid argon. Specifications

GOST 14162-79: Steel tubes of small dimensions (capillary)

GOST 14870-77: Reagents. Methods for determination of water

GOST 18300-87: Technical rectified ethyl alcohol. Specifications

GOST 18917-82: Natural gas fuel. Methods of sampling

GOST 2715-75: Metal wire screens. Types, basic parameters and dimensions

GOST 2768-84: Acetone technical. Specifications

GOST 3022-80: Technical hydrogen. Specification

GOST 6552-80: Reagents. Orthophosphoric acid. Specifications

GOST 6709-72: Distilled water. Specifications

GOST 8050-85: Carbon dioxide,

The Document is Referenced By:

Decision 112: On the list of international and regional (interstate) standards, and in their absence - national (state) standards, containing rules and methods of research (tests) and measurements, including rules of sampling, necessary for the application and implementation of the requirements of technical regulation of the Eurasian Economic Union "On safety of combustible natural gas prepared for transportation and (or) use" (TR EAEC 046/2018) and conformity assessment of technical regulation

GOST 27577-2000: Compressed natural fuel gas for internal-combustion engines. Specifications

GOST 27577-87: Compressed natural fuel gas for gas-driven vehicles

GOST 31369-2008: Natural gas. Calculation of calorific values, density, relative density and Wobbe index from composition

GOST 34867-2022: Natural gas prepared for transportation through the main gas pipelines. Technical conditions

GOST 5542-2014: Natural fuel gases for commercial and domestic use. Specifications

GOST 5542-87: Natural fuel gases for industrial and domestic use

GOST 8.563.2-97: Measurement of liquids and gases flow rate and quantity by differential pressure method measurement procedure by orifice instruments official edition

GOST 8.586.5-2005: State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure

GOST R 8.577-2000: State system for assuring the uniformity of measurements. Volumetric heat (energy) of combustion of natural gas. General requirements to methods for determination

GOST R 8.816-2013: State system for ensuring the uniformity of measurements. Natural gas. Volumetric heat (energy) of combustion. Method for measurement using the bomb calorimeter

GOST R 8.921-2016: State system for ensuring the uniformity of measurements. Certified reference materials of natural gas magistral and substitute natural gas. Procedure of determining the metrological characteristics

OST 51.40-83: Combustible natural gases supplied and transported via main gas pipelines. Technical conditions.

OST 51.40-93: Natural combustible gases transported via main gas pipelines

RD 153-34.0-04.202-98: Procedural Guidelines. Certification of Departments of Energy Facilities Performing Quantitative Chemical Analysis. Organization and Procedure

RD 200-RSFSR-12-0185-83: Manual for operation of compressed natural gas gas cylinders

RD 34.11.111-89: Methodology instructions. State analysis of metrological industrial support at energy providers and sectoral research institutes

VRD 39-1.10-064-2002: Equipment for liquefied natural gas (LNG). General technological requirements when operating storage, transportation and gasification

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Building materials. Methods for combustibility test
Language: English
Price: $162.00
imgalt
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English
Price: $745.00
imgalt
Building materials spread flame test method
Language: English
Price: $147.00
imgalt
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English
Price: $349.00
imgalt
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $549.00
imgalt
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English
Price: $414.00
imgalt
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English
Price: $700.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!