GOST 9941-81
ГОСТ 9941-81
|
|
Seamless cold- and warm-deformed tubes made from corrosion-resistant steel
Трубы бесшовные холодно- и теплодеформированные из коррозионностойкой стали
Status: Effective. The limitation of effectiveness has been lifted: Protocol No. 2-92 of the IGU dated 05.10.92 (IUS 2-1993)
The standard applies to seamless cold and heat-deformed pipes made of general corrosion-resistant steel.
Стандарт распространяется на бесшовные холодно и теплодеформированные трубы из коррозионностойкой стали общего назначения.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstandart of the USSR,
11/19/1981
SKU: RUSS18077
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
23 Hydraulic and pneumatic systems and components for general use. »
Welding regulations »
Main materials »
Welding regulations »
Pipelines »
Welding regulations »
Documentation »
Welding regulations »
Non-destructive control »
Welding regulations »
Mechanical Testing »
Welding regulations »
Heat treatment »
Welding regulations »
Defects »
Welding regulations »
Main materials »
Steel, cast iron »
Standards for pipe fittings (TPA) »
10. Production »
10.2 Billets (forgings, stampings, rolling, castings, etc.) »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.12 Testing and control of products of metallurgical industry »
4.12.4 Iron and steel products »
ISO classifier »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.10 Cast iron and steel pipes »
National standards »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.10 Cast iron and steel pipes »
National Standards for KGS (State Standards Classification) »
Latest edition »
V Metals and metal products »
V6 Pipes metal and pipe products »
V62 Steel pipes and their connecting parts »
National Standards for OKSTU »
STEEL PIPES »
Seamless corrosion-resistant thin-walled pipes for general use »
The Document is Replaced With:
GOST 9941-2022: Cold-deformed seamless pipes made of corrosion-resistant high-alloy steels. Technical conditions
As a Replacement Of:
GOST 9941-72: Seamless cold- and warm-deformed tubes made from corrosion-resistant steel
The Document References:
GOST 10006-80: Metal pipes
GOST 10692-80: Steel and cast iron pipes and fittings. Rules for acceptance of marking, packing, transportation and storage
GOST 17410-78: Non-destructive testing of seamless cylindrical metal pipes and tubes. Methods of ultrasonic imperfection detection.
GOST 18360-93: Plate snap-gauges for diameters from 3 to 260 mm. Dimensions
GOST 18365-93: Plate snap-gauges with changeable lips for diameters over 100 to 360 mm. Dimensions
GOST 19040-81: Metal tubes. Method of tension test at high temperatures
GOST 3845-75: Metallic tubes. Hydraulic pressure testing method
GOST 5632-72: High-alloy steels and corrosion-proof, heat-resisting and heat treated alloys. Grades
GOST 6032-89: Corrosion-resistant steels and alloys. Methods for determination of intercrystalline corrosion resistance
GOST 6507-90: Micrometers. Specifications
GOST 7502-98: Measuring metal tapes. Specifications
GOST 8026-92: Levelling rules. Specifications
GOST 8694-75: Tubing (pipes). Expansion testing method
GOST 8695-75: Tubing (pipes). Flattening testing method
GOST 9.914-91: Unified system of corrosion and ageing protection. Corrosion-resistant austenitic steels. Electrochemical methods for determination of intercrystalline corrosion resistance
The Document is Referenced By:
ATK 24.218.04-90: Liquid mesh filters for pipelines. Design, dimensions and dimensions
ATK 24.218.06-90: Couplings for Welded Steel Vessels and Apparatus. Types, Basic Parameters, Dimensions, and General Technical Requirements
ATK 26-01-1-89: Pipeline viewing lights. Types and designs
GOST 12644-80: Hollow and semi-hollow rivets. Specifications
GOST 13003-88: Insulating oils. Method of gas stability determination in electric field
GOST 13236-83: Electrotechnical periclase powders. Specifications
GOST 14022-78: Anhydrous hydrogen fluoride. Specification
GOST 14022-88: Anhydrous hydrogen fluoride
GOST 15763-2005: Threaded and flange pipe connections for PN to 63 MPa (to 630 kgf/sq sm). General specifications
GOST 16078-70: Tube connections on internal cone. Technical requirements
GOST 17679-80: Light yokes for pipe-line and cable fixing. Design and dimensions
GOST 18677-73: Seals. Design and dimensions
GOST 18680-73: Sealing details. General specifications
GOST 19277-73: Seamless steel tubes for oil and fuel lines. Specifications
GOST 19755-84: Sealing metal conical gaskets for closed gates. Specifications
GOST 21708-96: Solid mineral fuel. Method for determination of ash abrasiveness coefficient
GOST 24030-80: Seamless pipes from corrosion-resistant steel for power plant industry
GOST 25164-82: Connections of SSI instruments and devices with external hydraulic and gas lines. Types, basic parameters and dimensions. Technical requirements
GOST 26450.0-85: Rocks. General requirements for sampling and sample preparation for determination of collecting properties
GOST 26526-85: Vacuum equipment. Flanger joint for high vacuum system. Design, dimensions and technical requirements
GOST 2678-87: Rolled roofing and hydroinsulatings materials. Methods of test
GOST 27590-2005: House-tube water-watered heat supply systems. General specifications
GOST 30872-2002: Air cooling machines. General specifications
GOST 32569-2013: Steel pipe technology. Requirements for design and operation of explosive and chemically dangerous production
GOST 33260-2015: Pipeline valves. Мetals used in pipeline valves production. Basic requirements for choice of materials
GOST 34347-2017: Steel welded vessels and apparatus. General technical conditions
GOST 34493-2018: Tractors and agricultural machinery powered by gas engine fuel. General technical requirements
GOST 5890-78: Pipe connection with screwed ends. Specifications
GOST 6032-2003: Corrosion-resistant steels and alloys. Test methods of intercrystalline corrosion resistance
GOST 6032-2017: Steel and corrosion resistant alloys. Test methods for resistance to intergranular corrosion
GOST 6718-93: Liquid chlorine. Specifications
GOST 8.310-90: State service of standard reference data
GOST 9941-2022: Cold-deformed seamless pipes made of corrosion-resistant high-alloy steels. Technical conditions
GOST R 50234-92: Liquid chlorine. Specifications
GOST R 50850-96: Metro coaches. General specifications
GOST R 51364-99: Air cooling apparatus. General specifications
GOST R 52209-2004: Hose assemblies for gas burners and gas appliances. General technical requirements and test methods
GOST R 52232-2004: Light rail cars. General specifications
GOST R 52630-2006: Steel welded vessels and apparatus. General specifications
GOST R 52630-2012: Steel welded vessels and apparatus. General specifications.
GOST R 53682-2009: Fired heaters for refineries. General technical requirements
GOST R 54803-2011: High-pressure welded steel vessels. General technical requirements
GOST R 55509-2013: Pipeline valves. Metals used in pipeline valves production. Basic requirements for choice of materials
GOST R 55601-2013: Heat exchanger apparatuses and air cooling apparatuses. Tube expanding in tube-sheets. General technical requirements
GOST R 55682.2-2017: Water-tube boilers and auxiliary installations. Part 2. Materials for pressure parts of boilers and accessories
GOST R 55821-2013: Bogies of passenger cars on locomotive traction. Specifications
GOST R 56248-2014: Liquid hydrogen. Specifications
GOST R 58878-2020: Sewage systems for ships. Design rules
GOST R 70464-2022: Three-axle axle suspension bogies for freight wagons. General specifications
GOST R 70517-2022: Hydrometallurgical plants of uranium mining enterprises. Norms of technological design
GOST R ISO 9329-4-2010: Seamless tubes from austenitic high-alloy steels for pressure purposes. Specifications
IM 4-12-95: Automation systems. Handbook of materials. Part 1. Basic materials
NRP-93: Norms for strength calculation of transport packaging kits for transportation of nuclear fissile materials
ODM 218.2.055-2015: Recommendations for the calculation of drainage systems for road structures
OMU 42-21-26-88: Departments of hyperbaric oxygenation, rules of operation and repair
OST 1-42172-83: Control of protective environment during welding of parts from titanium alloys
OST 24.200.02-91: Assembling units of steel pipelines on nominal pressure<=10 MPa (100 kgf/cm2) of complete technological lines. General specifications.
OST 24.201.03-90: Steel high-pressure vessels and devices. General technical requirements.
OST 26.260.18-2004: Process modules for oil and gas industry. General technical specifications
OST 26-01-1159-75: Pipe input-outputs of steel welded containers and devices. Technical requirements.
OST 26-01-342-71: Parts of pipelines. Viewing portholes with flat glass. Design and dimensions
OST 26-02-1015-85: Tube fastening to tube sheets.
OST 26-04-1333-75: Straight welded stainless elbows. Design and dimensions.
OST 26-07-2027-80: Symbols of materials in the design documentation.
OST 26-17-01-83: Heat exchangers and standard air cooling devices. Technical requirements to a bead forming with torque limiting.
OST 26-18-3-86: liquid mesh filter for piping. Design, parameters and dimensions.
OST 26-18-6-88: Vessels, Apparatus and Process Units, Operating at Temperature Below Minus 70°C. Technical requirements
OST 26-291-94: Steel welded vessels and devices. General technical requirements.
OST 34-10-416-90: Details and prefabricated units of pipelines of nuclear plants, working P<2.2 MPa, t ≤ 300 °C. Pipe grades.
OST 34-10-510-90: Details and prefabricated units of pipelines of nuclear plants, working P<2.2 MPa, t ≤ 300 °C. Internal flush-jointed drilled tees. Construction and dimensions.
OST 34-10-511-90: Details and prefabricated units of pipelines of nuclear plants, working P<2.2 MPa, t ≤ 300 °C. Transitional welded tees.
OST 34-10-747-97: Parts and assembly units of pipelines of TPPs at Rrab <2.2 MPa (22 kgf
OST 34-42-747-85: Details and prefabricated units of TPS pipelines, working P<2.2 MPa (22 kg/cm2), t ≤545 °C. Pipes and rolling. Pipe grades.
OST 34-42-816-85: Welding of pipelines from the pearlitic and austenitic steels on nuclear power plants. Main provisions.
OST 36-13-90: Shields and consoles of automation systems for technological processes. General technical conditions
OST 39-227-89: Water for flooding of oil reservoirs. Determination of the filtration performance and water-sensitiveness of low-permeable rock-reservoirs in-situ.
OST 5R.9527-94: Pipes and products of general purpose marine systems. Cleaning and preservation (before installation). Typical processes.
OST 95 10439-2002: Equipment for radioactive environments. General technical requirements. Acceptance. Maintenance and repair.
OTT 1.5.2.01.999.0157-2013: The supporting structures of the elements of nuclear plants with water-cooled power reactors. General technical requirements
OTU 3-01: Vessels and apparatuses. General specifications for the repair of buildings
PB 03-108-96: Process pipeline design and safe operation rules
PB 03-384-00: Rules for design, manufacture and acceptance of steel welded vessels and apparatus
PB 03-576-03: Regulations of design and safe operation of pressure vessels
PB 03-75-94: Rules for arrangement and safe operation of steam and hot water piping
PB 10-115-96: Regulations of design and safe operation of pressure vessels
PB 10-574-03: Safety Operation and Design Codes for Steam and Hot Water Boilers
PB 11-401-01: Safety regulations for gas-handling facilities of metallurgic and coke-chemical industries and enterprises
PNAE G-7-008-89: Regulations for design and safe operation of equipment and piping of atomic power plants
PNST 228-2017: Aviation equipment. Hydraulic systems. Straight, cross, triple, transitional and transitional connectors, under axial pressing for a pressure of 35 MPa. Specifications
PNST 248-2017: On-board cryogenic tanks for locomotives on liquefied natural gas. General specifications
PNST 528-2021: Oil and gas industry. Subsea production systems. Seamless and welded austenitic stainless steel pipes. Technical conditions
PNST 529-2021: Oil and gas industry. Subsea production systems. Seamless and welded stainless austenite-ferritic steel pipes. Technical conditions
PNST 683-2023: Oil and gas industry. Underwater production systems. Tubes from austenitic-ferritic corrosion-resistant steel. Technical specifications
RD 01-001-06: Welding of steel gas pipelines and the gas equipment in the city municipal services and power installations.
RD 10-165-97: Methodological guidelines for supervision of water-chemical regime of steam and hot water boilers. Series 17. Issue 32.
RD 153-34.1-003-01: Welding, heat treatment and control of copper pipe systems and pipelines at power equipment installation and repair.
RD 153-34.1-24.505-98: Recommended Practice for Selection of Injectors for Supplying Water Spray in Fuel Pulverizing Systems in Order to Quickly Reduce the Temperature of the Dust-Gas-Air Mixture in Emergencies
RD 24.031.120-91: Procedural Guidelines. Quality Standards for System Water and Feed Water in Hot Water Boilers and Maintenance and Monitoring of Water Chemistry
RD 24.031.121-2007: Equipment of steam land-type boilers with devices for vapour and water sampling.
RD 24.031.121-2012: Equipping steam stationary boilers with devices for sampling steam and water
RD 24.031.121-91: Guidelines for equipping of stationary steam boilers with vapor and water sampling devices
RD 26-02-80-2004: The leading document. Welded coils for pipe furnaces. Requirements to design, production and delivery.
RD 31.00.89-86: A station for the preparation of drinking water from a marine outboard. Design rules and regulations
RD 34.10.306-88: Material allowances for repairs. Stationary steam boilers.
RD 34.37.104-88: Procedural Guidelines for Design of Automated Systems for Operational Chemical Monitoring of Heat Transfer Agent in Supercritical-Pressure Reactors
RD 34.37.506-88: Procedural Guidelines for Water Treatment and Water Chemistry in Water Heating Equipment and Piped Heat Distribution Systems
RD 34.44.102-97: Guidance on the design of farms for liquid fuel for gas turbine and combined cycle power plants of TPP RAO "UES of Russia", 08/25/97
RD 3689-001-00220302/31-2004: Radiant pipes and components for reaction pipe furnaces. Requirements for design, production and delivery.
RD 3689-002-00220302/31-2008: Welding of radiant tubes and their elements for reaction tube furnaces. Main provisions
RD 38.13.004-86: Operation and repairs of process pipelines operating under pressure up to 10.0 MPa (100 kgf/cm2)
RD OP.42-001-85: Main provisions for welding and control of the NPP tanks (reservoirs)
RD RTM 38.14.006-86: Method for determining the service life of the coils of catalytic reforming furnaces that have worked out the project resource
Resolution: Rules for the design and safe operation of steam and hot water boilers
RM 3-82-90: Shields and consoles of automation systems of technological processes. Features of application. Guide to OST 36.13-90
RM 4-206-95: Automation systems. Specification of equipment, products and materials. Directions for implementation. Allowance to GOST 21.110-95
RM 4-246-91: Automation systems. General requirements for CAD
RM 4-2-96: Computer-aided design system. Automated systems. Directions for application
RM 4-6-92: Process automation systems. Design of electrical and pipe wiring. Part 3. Guidelines for the implementation of the documentation. Allowance for RTM 36.22.7-92
RMD 32-24-2015 Sankt-Peterburg: Design of artificial structures at transport facilities in St. Petersburg
RTM 24-85: Information index of state, republican and industry standards, technical specifications for materials and products used in the design of furnaces and dryers
SA 03-005-07: Industrial pipelines of oil-refining, petrochemical and chemical industry. Requirements to configuration and operation
Safety Guide: Recommendations on arrangement and safe operation of process pipelines
Safety Guide: Recommendations on technical diagnostics of welded vertical cylindrical tanks for oil and petroleum products
SNiP 2.04.12-86: Steel pipelines strength analysis
SNiP 3.05.07-85: Automated systems
SP 120.13330.2012: Subway systems
SP 158.13330.2014: Buildings and rooms for health care facilities. Design rules
ST TsKBA 005.1-2003: Pipe fittings. Metals used in the valve industry. Part 1. Basic requirements for the choice of materials
ST TsKBA 010-2004: Pipe fittings. Forgings, stampings and rolled products. Technical requirements
ST TsKBA 013-2007: Pipe fittings. Welding of fittings to the pipeline. Technical requirements
ST TsKBA 070-2009: Pipe fittings. Symbol of materials in the design documentation
TU 14-3-1109-82: Seamless cold and heat deformed pipes made of stainless steel
TU 14-3-1401-86: Seamless cold-deformed pipes of steel grade 02Х18Н11
TU 14-3-1430-87: Pipes, Seamless and Welded, Second-Grade
TU 14-3R-197-2001: Seamless pipes made of corrosion-resistant steel with high surface quality. Technical conditions
TU 1468-001-17192736-01: Seamless welded bends made of alloy and high alloy steel
TU 26-02-1102-89: Shell and tube heat exchangers of increased thermal efficiency with an expander on the housing
TU 26-18-38-90: Parts of seamless welded pipelines from steel grades 15Х5М, 12Х1МФ, 12Х18Н10Т, 08Х22Н6Т
TU 3612-023-00220302-01: Shell-and-tube heat exchangers with a floating head, shell-and-tube with U-tubes and tube bundles for them
TU 3612-024-00220302-02: Shell and tube heat exchangers with fixed tube sheets and shell and tube with temperature compensator on the shell
TU 36-1686-82: Bends are steeply curved with an angle of 90 degrees from steel grades 15X5M, 08X18NIOT, 12X18NIOT and 10X17H13M2T seamless welded on the Rou is less than 10 MPa
TU 3644-006-00220302-99: Shell-and-tube heat exchangers for special purposes. Refrigeration evaporators and condensers
TU 3681-134-00220302-2007: Air coolers block-modular complete AVG-KB. Technical specifications
VNTP 12-92 KD: Interim Engineering Design Standards for Facilities for Production of Canned Foods for Child Nutrition
VNTP 12-94K: Engineering Design Standards Facilities of the Canned Fruits and Vegetables Industry
VNTP 645/1618-92: Standards for technological design of dairy industry enterprises
VSN 10-83/Minhimprom: Instruction on designing of oxygen gas pipelines
VSN 50-83: Design Guidelines for Piping for Liquid Products of Air Separation
|
Customers Who Viewed This Item Also Viewed:
 |
Industrial process measurement and control equipment. Reliability. General requirements and test methods
Language: English |
Gauged corrosion-resistant, heat-resistant and high-temperature steel shape
Language: English |
System for ensuring the reliability and safety of construction sites. Loads and impacts. design standards
Language: English |
Heating, ventilation and air conditioning. Fire Safety Requirements
Language: English |
Reliability of atomic power stations and their equipment. General statements and reliability index nomenclature
Language: English |
Electromagnetic compatibility of technical equipment. Technical equipment for nuclear power plants. Requirement and test methods
Language: English |
Billets made of corrosion-resistant steels of 12Х18Н9Т, 12Х18Н10Т, 08Х18Н10Т, 10Х17Н13М2Т, 12Х18Н12Т and 03Х21Н32М3Б types.
Language: English |
Dependability in technics. Terms and definitions
Language: English |
System of products development and launching into manufacture. Technical assignment. Requirements to contents and form of presentation
Language: English |
Reliability in technology. Composition and general rules for setting reliability requirements
Language: English |
Rails of types P38 and P42. Technical conditions
Language: English |
Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.