GOST 25485-89
ГОСТ 25485-89
|
|
Cellular concretes. Specifications
Бетоны ячеистые. Технические условия
Status: Partially canceled in the Russian Federation. IUS 8-2008
The standard applies to cellular concrete. The requirements of this standard must comply with the development of new and revision of existing standards and specifications, design and technological documentation for products and designs of these concretes, as well as their manufacture.
Стандарт распространяется на ячеистые бетоны. Требования настоящего стандарта должны соблюдать при разработке новых и пересмотре действующих стандартов и технических условий, проектной и технологической документации на изделия и конструкции из этих бетонов, а также при их изготовлении.
Choose Language:
Format: Electronic (pdf/doc)
Approved: State Committee of the Council of Ministers of the USSR for Construction,
3/30/1989
SKU: RUSS18078
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
6. Regulatory documents for building materials and products »
k.62 Concretes and mortars »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
2 Tests for external factors »
2.3 Testing of products in construction »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.100 Building Materials »
91.100.30 Concrete and concrete products »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.100 Building Materials »
91.100.30 Concrete and concrete products »
National Standards for KGS (State Standards Classification) »
Latest edition »
Zh Construction and building materials »
Zh1 Construction materials »
Zh13 Concretes and mortars »
As a Replacement Of:
GOST 12852.3-77: Cellular concrete. Method for determining shrinkage upon drying
GOST 12852.4-77: Cellular concrete. Methods for the determination of frost-resistance
GOST 25485-82: Cellular concretes. Specifications
The Document References:
GOST 10060.0-95: Methods for the determination of frost-resistance. General requirements
GOST 10178-85: Portland cement and portland blastfurnace slag cement. Specifications
GOST 10180-90: Concretes. Methods for strength determination using reference specimens
GOST 11024-84: Concrete and reinforced concrete panels for external walls of residential and civil buildings. General specifications
GOST 11118-73: Autoclave cellular concrete panels for exterior walls of buildings. Technical requirements
GOST 12172-74: Phenol-polivinylacetyl adhesives. Specifications
GOST 12504-80: Concrete and reinforced concrete panels for internal walls of residential and civil buildings. General specifications
GOST 12730.1-78: Concretes. Methods of determination of density
GOST 12730.2-78: Concretes. Method of determination of moisture content
GOST 12852.3-77: Cellular concrete. Method for determining shrinkage upon drying
GOST 12852.4-77: Cellular concrete. Methods for the determination of frost-resistance
GOST 13015.1-81: Prefabricated concrete and reinforced concrete constructions and products. Acceptance
GOST 13078-81: Sodium glass liquid. Technical conditions
GOST 17177-94: Thermal insulating materials and products for building application. Test methods.
GOST 17623-87: Concrete. Radioisotope method of average density determination
GOST 18105-86: Concretes. Rules for the strength control
GOST 19113-84: Pine common rosin
GOST 19570-74: Autoclave cellular concrete panels for internal walls, partitions and floors of house and civil buildings. Technical requirements
GOST 201-76: Trisodium phosphate. Technical conditions
GOST 2067-93: Bone glue. Specifications
GOST 21458-75: Sodium sulfate crystallization. Technical conditions
GOST 21520-89: Small-sized wall blocks of cellular concrete. Specifications
GOST 21616-91: Resistive-strain sensors
GOST 21718-84: Building materials. Dielectric method of measurement of moisture
GOST 2263-79: Sodium hydroxide for industrial use. Specifications
GOST 22685-89: Moulds for making control specimens of concrete. Specifications
GOST 23732-79: Water for concretes and mortars. Specifications
GOST 24104-2001: Laboratory scales. General technical requirements
GOST 24452-80: Concretes. Methods of prismatic compressive strengths, modulus of elasticity and Poisson ratio determination
GOST 24816-81: Building materials. Method of hygroscopic moisture determination
GOST 25192-82: Concretes. Classification and general technical requirements
GOST 25336-82: Laboratory glassware and equipment. Basic parameters and dimensions
GOST 25898-83: Building materials and products. Methods of steam-tightness determination
GOST 27005-86: Light-weight and cellular concretes. Rules of average density control
GOST 27006-86: Concretes. Rules for mix proportioning
GOST 28836-90: Resistive strain-gauge
GOST 3252-80: Hide glue. Specifications
GOST 3476-74: Slags domain and electrothermophosphoric granulated for the production of cements
GOST 4.212-80: Product-quality index system. Building. Concretes. Nomenclature of indices
GOST 4013-82: Gypsum and gypsum-anhydrite rock for the manufacture of binders. Specifications
GOST 4221-76: Reagents. Potassium carbonate. Specifications
GOST 5100-85: Soda ash technical. Technical conditions
GOST 5494-95: Pigmentary aluminium. Specifications
GOST 5742-76: Cellular concrete thermoinsulating boards
GOST 7076-99: Building materials and products. Method of determination of steady-state thermal conductivity and thermal resistance
GOST 8.001-80: State system of ensuring the unity of measurements. Rules for conducting the state tests of measuring means
GOST 8736-93: Sand for construction works. Specifications
GOST 9179-77: Lime for building purposes. Specifications
OST 21-60-84: Fly ash for the production of cellular concrete products. Technical conditions.
PR 50.2.009-94: The testing and approval procedure for the measurement instrumentation
R 50.2.009-2001: State system for ensuring uniformity of measurements. Electrocardiographs, electrocardioscopes and electrocardioanalyzers. Method of verification
Resolution 246: Regulations on the implementation of federal state metrological supervision
ST SEV 1406-78: Concrete and reinforced concrete structures. Basic provisions in design
TU 38-107101-76: Scrubber paste "SP". Additive to concrete and mortar
The Document is Referenced By:
GOST 11024-84: Concrete and reinforced concrete panels for external walls of residential and civil buildings. General specifications
GOST 11118-2009: Autoclaved aerated concrete panels for external walls of buildings. Specifications
GOST 12504-2015: Concrete and reinforced concrete panels for internal walls of residential and civil buildings. General specifications
GOST 12504-80: Concrete and reinforced concrete panels for internal walls of residential and civil buildings. General specifications
GOST 13015.0-83: Prefabricated concrete and reinforced concrete constructions and products. General technical requirements
GOST 13015-2003: Concrete and reinforced concrete products for construction. General technical requirements. Rules for acceptance, marking, transportation and storage
GOST 13015-2012: Concrete and reinforced concrete products for construction. General technical requirements. Rules for acceptance, marking, transportation and storage
GOST 19570-2018: Panels made of autoclaved aerated concrete for floors of residential and public buildings. Technical specifications
GOST 20910-2019: Concrete is heat-resistant. Technical specifications
GOST 20910-90: Refractory concretes. Specifications
GOST 21520-89: Small-sized wall blocks of cellular concrete. Specifications
GOST 25818-2017: Fly ash thermal power plants for concrete. Technical conditions
GOST 30459-2003: Additives for concretes and mortars. Methods of determining the efficiency
GOST 30459-2008: Admixtures for concretes and mortars. Determination and estimate of the efficiency
GOST 30540-97: The equipment for manufacture of products from cellular autoclaved concrete. General specifications and control methods
GOST 31359-2007: Cellular autoclave curing concretes. Specifications
GOST 31360-2007: Wall unreinforced products of cellular autoclave curing concrete. Specifications
GOST 31384-2008: Structural concrete protection against corrosion. General requirements
GOST 31384-2017: Protection of concrete and reinforced concrete structures against corrosion. General technical requirements
GOST 31424-2010: Non-metallic construction materials from sifting of crusting solid stone in aggregate manufacturing. Specifications
GOST R 54851-2011: Building envelope in similar. Calculation reduced total thermal resistances
GOST R 54923-2012: Polymer composite wall ties for multilayer envelope buildings. Specifications
GOST R 56178-2014: Modifiers of organic-mineral origin of MB type for concretes, mortars and dry mixes. Specifications
GOST R 56592-2015: Mineral Admixtures for Concretes and mortars. General specifications
GOST R 8.621-2006: State system for ensuring the uniformity of measurements. Building materials and products. Moisture and heat conduction measurement procedure by the dielcometric method
Manual: Manual for impulse and low consumption fire extinguishing systems
Manual for MR 23-345-2008: Standards of the energy passport and the section "Energy Efficiency" for residential, public and mixed buildings (manual to MP 23-345-2008)
MDS 31-12.2007: The floors of residential, public and industrial buildings using materials from the company "Henkel Bautechnik." Materials for design and working drawings of nodes
OSN-APK 2.10.03.001-04: Designing the integrated protection of reinforced concrete structures of industrial agricultural buildings and structures from the effects of corrosive environments
PNST 61-2015: Foamed concrete thermo insulating blocks based on nanostructured binder. Specifications
Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope
RMD 23-16-2012 Sankt-Peterburg: Recommendations for energy efficiency in residential and public buildings
RMD 51-25-2018 St. Petersburg: Recommendations for the design, installation and operation of facade systems for new construction, reconstruction and repair of residential and public buildings in St. Petersburg. Part II Recommendations for the operation and repair of facade systems for new construction and reconstruction of residential and public buildings in St. Petersburg
RMD 52-01-2006 Sankt-Peterburg: Design and construction of enclosing structures of residential and public buildings using cellular concrete in St. Petersburg. Part I
RSN 58-86: Guidelines for design of panel exterior walls of residential buildings for the north building and climatic zone
SNiP 2.03.01-84 Reference Manual: Reference manual on design of concrete and reinforced concrete structures made of heavy and light concrete without reinforcement prestressing
SNiP 52-01-2003: Concrete and ferroconcrete structures. Principal rules
SP 15.13330.2012: Masonry and reinforced masonry structures
SP 23-101-2000: Design of thermal performance of buildings
SP 23-101-2004: Design of thermal protection of buildings
SP 28.13330.2012: Corrosion protection of buildings structures. Updated living edition of SNiP 2.03.11-85
SP 327.1325800.2017: Exterior masonry walls with brick veneer. Rules of design, operation and repair
SP 339.1325800.2017: Designs from cellular concrete. Rules of design
SP 70.13330.2012: Bearing and enclosing structures. Updated living edition of SNiP 3.03.01-87
TU 5767-001-18896209-2000: Thermal Insulating Non-Autoclaved Cellular Concrete "EKSTRAPOR". Technical Specifications
|
Customers Who Viewed This Item Also Viewed:
 |
Metals. Methods of tension test
Language: English |
Liquids for aircrafts systems. Method for determination thermo oxidizing stability and corrosion activity
Language: English |
Natural gas for industrial and municipal purposes. Technical conditions
Language: English |
Global navigation satellite system. Emergency response system in case of accidents. Test methods for emergency services call device/system for compliance with the requirements for the quality of loudspeaker communication in the vehicle cab.
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.