RD 03-613-03

РД 03-613-03

Procedures of use of welding materials during fabrication, installation, repair and modernization of technical systems for hazardous production facilities

Порядок применения сварочных материалов при изготовлении, монтаже, ремонте и реконструкции технических устройств для опасных производственных объектов

Status: Effective

The document establishes the procedure for the use of welding materials used in the manufacture, installation, repair and reconstruction of technical devices for hazardous production facilities, as well as the requirements and conditions for testing, examination and processing of their results

Документ устанавливает порядок применения сварочных материалов, используемых при изготовлении, монтаже, ремонте и реконструкции технических устройств, для опасных производственных объектов, а также требования и условия проведения испытаний, освидетельствования и оформлению их результатов

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Gosgortekhnadzor of Russia, 6/19/2003

SKU: RUSS18081

Price: $142.00


The Product is Contained in the Following Classifiers:

Construction (Max) » Regulations » Regulatory documents of supervisory authorities » Regulatory documents of Gosgortekhnadzor »

Welding regulations » Welding work »

Welding regulations » Main materials »

Welding regulations » Welding materials »

Welding regulations » welding equipment »

Welding regulations » Welding staff »

Welding regulations » Certification »

Welding regulations » Documentation »

Welding regulations » Non-destructive control »

Welding regulations » Mechanical Testing »

Welding regulations » Heat treatment »

Welding regulations » Defects »

Welding regulations » Welding work » Manual welding »

Welding regulations » Welding work » Mechanized welding »

Welding regulations » Welding work » Surfacing »

Welding regulations » Welding work » Dusting »

Welding regulations » Main materials » Steel, cast iron »

Welding regulations » Welding materials » Electrodes »

Welding regulations » Welding materials » Wire »

Welding regulations » Welding materials » Fluxes »

Welding regulations » Welding materials » Gases »

Technical Supervision » Section I. Technological, construction, energy supervision and environmental protection regarding limitation of negative anthropogenic impact » IV. Regulatory legal acts and regulations » 2. Industrial safety » 2.1. Common to various hazardous production facilities »

Standards for pipe fittings (TPA) » 14. Operation and repair of injection molding machines » 14.1 Installation »

Standards for pipe fittings (TPA) » 14. Operation and repair of injection molding machines » 14.3 Repair of injection molding machines »

Standards for pipe fittings (TPA) » 10. Production » 10.3 Welding »

PromExpert » SECTION IV. INDUSTRIAL SAFETY » II Industrial safety requirements for operation of a hazardous production facility » 1 General industrial safety requirements for operation of a hazardous production facility »

ISO classifier » 25 MECHANICAL ENGINEERING » 25.160 Welding, brazing and hard soldering » 25.160.20 Welding consumables »


The Document References:

GOST 6996-66: Welded joints. Methods of mechanical properties determination

PB 03-273-99: Rules for qualification test of welders and welding production specialists

The Document is Referenced By:

GOST 12.2.063-2015: Pipeline valves. General safety requirements

GOST 31385-2008: Vertical cylindrical steel tanks for oil and oil-products. General specifications

GOST 31385-2016: Vertical cylindrical steel tanks for oil and oil-products. General specifications

GOST 33852-2016: Pipeline valves. Knife gate valves for trunk pipelines. General specifications

GOST 33857-2016: Pipe fittings. Welding and quality control of welded joints. Technical requirements

GOST 34029-2016: Pipeline accessories. Check fittings for main oil pipelines and oil product pipelines. General specifications

GOST 34568-2019: The main pipeline transport of oil and oil products. Cameras for starting and receiving cleaning and diagnostic tools. General specifications

GOST R 52910-2008: Vertical cylindrical steel tanks for oil and oil-products. General specifications

GOST R 53672-2009: Pipeline valves. General safety requirements

GOST R 54317-2011: Launching and technical complexes of space-rocket complexes. Safety requirements

GOST R 54892-2012: Installation of air separation plants and other cryogenic equipment. General provisions

GOST R 56685-2015: Trunk pipelines for oil and oil products transportation. Fittings for diameters from 530 to 1220 mm. General specifications

GOST R 57991-2017: Trunk pipeline transport of oil and oil products. Steel piles of pipes used for foundation construction of above-ground pipelines supports. General specifications

GOST R 58616-2019: Pipe fittings. Regulating fittings for main oil pipelines and oil product pipelines. General specifications

GOST R ISO 13534-2013: Petroleum and natural gas industries. Drilling and production equipment. Inspection, maintenance, repair and remanufacture of hoisting equipment. General technical requirements

RD 01-001-06: Welding of steel gas pipelines and the gas equipment in the city municipal services and power installations.

RD 22-16-2005*: Guiding regulatory material. Hoisting machines. Selection of materials for the manufacture, repair and reconstruction of welded steel structures

RD 3689-002-00220302/31-2008: Welding of radiant tubes and their elements for reaction tube furnaces. Main provisions

RD NIIKranostroeniya 03-05: Guidelines. Jib cranes for general use and cranes; Overhaul. General specifications

SDA 18: Requirements for organizations operating in the field of industrial safety for hazardous production facilities, safety of electric power facilities and construction

SP 365.1325800.2017: Vertical cylindrical steel tanks for storage of oil products. Rules of work's production and acceptance under installation

SP 378.1325800.2017: Offshore pipelines. Design and construction rules

SP 406.1325800.2018: Steel and field pipelines for oil and gas. Installation work. Welding and control of its implementation

SP 86.13330.2014: Main (Trunk) pipelines

ST TsKBA 025-2006: Pipe fittings. Welding and quality control of welded joints. Technical requirements

ST TsKBA 045-2009: Pipe fittings. Welding and surfacing of parts made of titanium and titanium alloys. Technical requirements and quality control

ST TsKBA 089-2010: Pipe fittings. Welding defects castings. Technical requirements

STO-SA-03-002-2009: Rules for the design, manufacture and installation of vertical cylindrical steel tanks for oil and oil products

Customers Who Viewed This Item Also Viewed:

Petroleum for oil-processing plants. Specifications
Language: English
Price: $18.00
Industrial gas burners. General technical requirements
Language: English
Price: $152.00
Electrical articles. General requirement for environment mechanical stability
Language: English
Price: $28.00
Rules of Electrical Installations Design (Russian Electrical Code). 7th Edition. All sections and exhibits
Language: English
Price: $478.76
Power transformer on-load tap-changing devices. General specifications
Language: English
Price: $167.00
Conical pipe thread. Profile, basic dimensions and tolerances
Language: English
Price: $71.00
Glass and glass products. Visual faults. Terms and definitions
Language: English
Price: $158.00
Industrial gas burners. Test methods
Language: English
Price: $204.00
Glass and glass products. Inspection methods for geometric parameters and appearance
Language: English
Price: $110.00
Weldable deformed reinforcing rolled products of A500C and B500C classes for reinforcement of concrete constructions. Specifications
Language: English
Price: $112.00
Crude petroleum. General specifications
Language: English
Price: $58.00
Power transformers. Test methods of tap changing devices
Language: English
Price: $626.00
Unified system for design documentation. Stages of designing
Language: English
Price: $71.00
White sugar. Specifications
Language: English
Price: $279.00
Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
Language: English
Price: $215.00
Rolled of normal, increased - and high-strength steel for shipbuilding. Specifications
Language: English
Price: $1,639.74
Guidelines for the photometric determination of hydrogen sulfide in the air
Language: English
Price: $62.00
Tempered glass. Specifications.
Language: English
Price: $149.00
Glass with low emissivity hard coating. Specifications.
Language: English
Price: $212.00
Glass laminated. Specifications.
Language: English
Price: $231.00

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!