RD 03-606-03
РД 03-606-03
|
|
Instructions for visual and measuring control
Инструкция по визуальному и измерительному контролю
Status: Effective
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosgortekhnadzor of Russia,
6/11/2003
SKU: RUSS18083
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Regulatory documents of supervisory authorities »
Regulatory documents of Gosgortekhnadzor »
Welding regulations »
Welding work »
Welding regulations »
Main materials »
Welding regulations »
Pipelines »
Welding regulations »
Welding materials »
Welding regulations »
Certification »
Welding regulations »
Documentation »
Welding regulations »
Non-destructive control »
Welding regulations »
Mechanical Testing »
Welding regulations »
Heat treatment »
Welding regulations »
Defects »
Welding regulations »
Assembly devices »
Welding regulations »
Welding work »
Automatic welding »
Welding regulations »
Welding work »
Surfacing »
Welding regulations »
Welding work »
Dusting »
Welding regulations »
Main materials »
Steel, cast iron »
Welding regulations »
Welding materials »
Electrodes »
Welding regulations »
Welding materials »
Fluxes »
Welding regulations »
Welding materials »
Gases »
Technical Supervision »
Section I. Technological, construction, energy supervision and environmental protection regarding limitation of negative anthropogenic impact »
IV. Regulatory legal acts and regulations »
2. Industrial safety »
2.1. Common to various hazardous production facilities »
Technical Supervision »
Section I. Technological, construction, energy supervision and environmental protection regarding limitation of negative anthropogenic impact »
IV. Regulatory legal acts and regulations »
5. Safety of electrical and thermal installations and networks »
5.1. Common to various energy facilities »
Standards for pipe fittings (TPA) »
11. Piping valves (TPA) tests »
11.2 Basic test procedures »
11.2.3 Periodic »
Standards for pipe fittings (TPA) »
11. Piping valves (TPA) tests »
11.2 Basic test procedures »
11.2.2 Acceptance of delivery »
Standards for pipe fittings (TPA) »
11. Piping valves (TPA) tests »
11.2 Basic test procedures »
11.2.1 Inspection »
PromExpert »
SECTION IV. INDUSTRIAL SAFETY »
II Industrial safety requirements for operation of a hazardous production facility »
3 Energy security »
3.1 General safety requirements for energy facilities »
ISO classifier »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.020 Metrology and measurements in general »
The Document References:
PB 03-440-02: Attestation rules for nondestructive inspection personnel
The Document is Referenced By:
DiOR 05: Methodology of diagnosing of technical condition and determining of residual life of process equipment of oil refineries and petrochemical plants
GOST 24950-2019: Curved bends and curve inserts on bends of the linear part of steel pipelines. Technical specifications
GOST 31385-2008: Vertical cylindrical steel tanks for oil and oil-products. General specifications
GOST 31385-2016: Vertical cylindrical steel tanks for oil and oil-products. General specifications
GOST 33852-2016: Pipeline valves. Knife gate valves for trunk pipelines. General specifications
GOST 34029-2016: Pipeline accessories. Check fittings for main oil pipelines and oil product pipelines. General specifications
GOST 34070-2017: Gas supply system. Main pipeline gas transportation. Mobile compressor unit. Technical requirements
GOST 34181-2017: Trunk pipelines for oil and oil products transportation. Technical diagnosis. Main principles
GOST 34568-2019: The main pipeline transport of oil and oil products. Cameras for starting and receiving cleaning and diagnostic tools. General specifications
GOST R 52910-2008: Vertical cylindrical steel tanks for oil and oil-products. General specifications
GOST R 54803-2011: High-pressure welded steel vessels. General technical requirements
GOST R 54892-2012: Installation of air separation plants and other cryogenic equipment. General provisions
GOST R 54907-2012: Trunk pipelines for oil and oil products transportation. Technical diagnosis. Basic principles
GOST R 55474-2013: Gas distribution systems. Requirements for gas distribution networks. Part 2. Steel gas pipelines
GOST R 55474-2019: Gas distribution systems. Gas distribution networks of natural gas. Part 2. Steel gas pipelines
GOST R 58095.1-2018: Gas distribution systems. Requirements for gas consumption networks. Part 1. Steel gas pipelines
GOST R 58095.2-2018: Gas distribution systems. Requirements for gas consumption networks. Part 2. Copper gas pipelines
GOST R 58617-2019: The main pipeline transport of oil and oil products. Capacities and tanks horizontal steel. General specifications
GOST R 58623-2019: The main pipeline transport of oil and oil products. Vertical cylindrical steel tanks. Technical Operation Rules
GOST R ISO 13533-2013: Petroleum and natural gas industries. Drilling and production equipment. Drill-through equipment. General technical requirements
GOST R ISO 13626-2013: Petroleum and natural gas industries. Drilling and production equipment. Drilling and well-servicing structures. General technical requirements
GOST R ISO 17078-3-2013: Petroleum and natural gas industries. Drilling and production equipment. Part 3. Running tools, pulling tools and kick-over tools and latches for side-pocket mandrels. General technical requirements
Letter 09-00-06/1968: On regulatory legal acts in the field of welding and non-destructive testing
Letter 09-00-06/7532: On application of regulatory documents in the course of non-destructive testing
Manual: Manual for impulse and low consumption fire extinguishing systems
MT-RTS-VIK-M-01-2017: Methods of visual and measuring control of trunnions and traverses of metal pouring ladles, hooks and extensions of hook suspensions of cranes transporting molten metal
MU 0397-00.002: Non-Destructive Testing Methodology for VE-50 and VP-50 Swivels
ODM 218.2.057-2015: Recommendations for use on bridges for drainage trays made of polymer composite materials
Order 116: Federal norms and rules in the field of industrial safety "Industrial safety rules for hazardous production facilities where equipment operating under excessive pressure is used"
Order 116: On the approval of the Federal norms and rules in the field of industrial safety "Industrial safety rules for hazardous production facilities using equipment operating under excessive pressure" (as amended on December 12, 2017) (canceled from 01.01.2021 on the basis of the Decree of the Government of the Russian Federation dated 06.08.2020 N 1192)
Order 498: List of questions proposed in the qualification examination for certification of experts in the field of industrial safety
OST 26.260.480-2003: Two-ply steel vessels and devices. Welding and weld deposition.
R Gazprom: Temporary technical requirements for equipment for opening pipelines
RD 03-410-01: Instructions on the procedure of comprehensive engineering certification of cryogenic tanks for liquefied gases
RD 10-112-1-04: Recommendations for expert examination of lifting machines. General provisions
RD 10-112-2-09: Methodological guidelines for expert examination of hoisting equipment. Part 2: General purpose boom cranes and articulated hoisting cranes.
RD 13-06-2006: Guidelines for the procedure for capillary control of technical devices and structures used and operated at hazardous production facilities
RD 15-03-2006: Guidelines for the examination of the industrial safety mine shaft pulleys
RD 15-04-2006: Guidelines for the examination of industrial safety belt conveyor systems
RD 15-05-2006: Guidelines for the examination of the industrial safety of lifting vessels of mine lifting installations
RD 15-13-2008: Guidelines for the examination of industrial safety of compressor installations used in coal mines and mines
RD 15-14-2008: Guidelines for the examination of the industrial safety of single-bucket excavators
RD 2082-18-2005: Technical diagnosis and design life prolongation program for cryogenic tank.
RD 22-16-2005*: Guiding regulatory material. Hoisting machines. Selection of materials for the manufacture, repair and reconstruction of welded steel structures
RD 3689-002-00220302/31-2008: Welding of radiant tubes and their elements for reaction tube furnaces. Main provisions
RD-15-15-2008: Guidelines on the procedure for conducting industrial safety expertise of mine electric locomotives
SDOS-07-2012: Methodological recommendations on the procedure for tightness control of technical devices and structures used and operated at hazardous production facilities
SP 365.1325800.2017: Vertical cylindrical steel tanks for storage of oil products. Rules of work's production and acceptance under installation
SP 378.1325800.2017: Offshore pipelines. Design and construction rules
SP 406.1325800.2018: Steel and field pipelines for oil and gas. Installation work. Welding and control of its implementation
SP 42-102-2004: Design and construction of gas pipelines from metal pipes. To replace SP 42-102-96
SP 86.13330.2012: Main pipelines
SP 86.13330.2014: Main (Trunk) pipelines
ST TsKBA 025-2006: Pipe fittings. Welding and quality control of welded joints. Technical requirements
ST TsKBA 052-2008: Pipe fittings. Requirements for materials of fittings used for hydrogen sulfide environments
ST TsKBA 088-2010: Pipe fittings. The quality control program of valves used for hydrogen sulfide environments
ST TsKBA 099-2011: Pipe fittings. Repairs. Organization of repair and general repair manual
STO: Thermal power plants. Methods of assessing the condition of the main equipment
STO-SA-03-002-2009: Rules for the design, manufacture and installation of vertical cylindrical steel tanks for oil and oil products
TU 3113-028-00220302-01: Heaters of steam and water-to-water for heating networks of heating and hot water systems. Technical conditions
TU 3612-023-00220302-01: Shell-and-tube heat exchangers with a floating head, shell-and-tube with U-tubes and tube bundles for them
TU 3612-024-00220302-02: Shell and tube heat exchangers with fixed tube sheets and shell and tube with temperature compensator on the shell
TU 3644-006-00220302-99: Shell-and-tube heat exchangers for special purposes. Refrigeration evaporators and condensers
Customers Who Viewed This Item Also Viewed:
 |
Jet fuels
Language: English |
State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure
Language: English |
Molded parts of coupler and automatic coupler devices of railway rolling stock. General specifications.
Language: English |
Main-line diesel locomotives. General technical requirements.
Language: English |
Four-wheel bogies of freight cars for mainline railways gauge 1520 (1524) mm. Specifications
Language: English |
Technical ethylcellosolve. Specifications
Language: English |
Automatic coupler model SA-3 and its components. Design and dimensions
Language: English |
Railway rolling stock. Devices to prevent running gear parts from dropping to the track. Methods of controlling strength characteristics
Language: English |
Electric heating devices for heating rolling stock railways. Safety requirements and test methods
Language: English |
Ice cream. General technical requirements
Language: English |
Welded joints in steel structures of railway rolling stock. Requirements for design, implementation and quality control
Language: English |
Locomotives The method of dynamic strength tests
Language: English |
Railway rolling stock. Norms for permissible exposure of railway track and test methods
Language: English |
Locomotives. Requirements for strength and dynamic qualities
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.