GOST 21997-76
ГОСТ 21997-76
|
|
Steel flattened strip of high strength
Лента стальная плющеная высокой прочности
Status: Effective - Supersedes. The limitation of the effectiveness period has been lifted: Decree of the State Standard No. 2367 of 12.29.91
The standard applies to flattened tape of high strength of structural, tool and spring steel, intended for the manufacture of spring parts and springs, with the exception of winding.
Стандарт распространяется на плющеную ленту высокой прочности из конструкционной, инструментальной и пружинной стали, предназначенную для изготовления пружинных деталей и пружин, за исключением заводных.
Choose Language:
Format: Electronic (pdf/doc)
Approved: State Committee of Standards of the Council of Ministers of the USSR,
7/12/1976
SKU: RUSS18150
The Product is Contained in the Following Classifiers:
Welding regulations »
Main materials »
Welding regulations »
Welding materials »
Welding regulations »
Documentation »
Welding regulations »
Mechanical Testing »
Welding regulations »
Main materials »
Steel, cast iron »
Welding regulations »
Welding materials »
Wire »
Welding regulations »
Welding materials »
Gases »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.12 Testing and control of products of metallurgical industry »
4.12.4 Iron and steel products »
ISO classifier »
77 METALLURGY »
77.140 Iron and steel products »
77.140.50 Steel sheet products and semi-finished products »
National standards »
77 METALLURGY »
77.140 Iron and steel products »
77.140.50 Steel sheet products and semi-finished products »
National Standards for KGS (State Standards Classification) »
Latest edition »
V Metals and metal products »
V3 Steel quality and high quality (quality stock) »
V34 Tapes »
National Standards for OKSTU »
METAL PRODUCTS FOR INDUSTRIAL PURPOSE (HARDWARE) »
Steel strip made of alloys of high ohmic resistance (nickel free) »
The Document References:
GOST 10354-82: Polyethylene film Specifications
GOST 10396-84: Crepe cable paper
GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications
GOST 11701-84: Metals. Methods of tensile testing of thin sheets and strips
GOST 13813-68: Metals. Bend test for sheets and strips thickness less then 4 mm
GOST 14192-77: Marking of cargoes
GOST 14192-96: Cargo marking
GOST 1435-90: Unalloyed tool steel bars, strips and coils
GOST 1435-99: Bars, strips and reels of tool unalloyed steel. General specifications
GOST 14959-79: Spring carbon and alloy steel bars. Specifications
GOST 15102-75: Universal metallic closed container of nominal gross mass 5,0 tn. Specifications
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 15171-78: Additive АКОР-1. Specifications
GOST 16272-79: Technical plasticized polyvinylchloride film. Specifications
GOST 1763-68: Steel. Methods for determination of decarbonised layer depth
GOST 18617-83: Wooden cases for hardware. Specifications
GOST 19300-86: Instruments for measurement of surface roughness by the profile method. Contact profilographs and profilometers. Types and main parameters
GOST 20435-75: Universal metallic closed container of nominal gross mass 3,0 tn. Specifications
GOST 20799-88: Industrial oils Specifications
GOST 21650-76: Means of fastening tared and break bulk cargoes in the loads units. General requirements
GOST 22225-76: Containers multipurpose gross weight 0,625 and 1,25 t. Specifications
GOST 22536.0-87: Carbon steel and unalloyed cast iron. General requirements for methods of analysis
GOST 22536.10-88: Carbon steel and unalloyed cast iron. Methods for determination of alluminium
GOST 22536.1-88: Carbon steel and unalloyed cast iron. Methods for determination of general carbon and graphite
GOST 22536.2-87: Carbon steel and unalloyed cast iron. Methods for the determination of sulfur
GOST 22536.3-88: Carbon steel and unalloyed cast iron. Methods for determination of phosphorus
GOST 22536.4-88: Carbon steel and unalloyed cast iron. Methods for determination of silicon
GOST 22536.5-87: Carbon steel and unalloyed cast iron. Methods for determination of manganese
GOST 22536.6-88: Carbon steel and unalloyed cast iron. Methods for determination of arsenic
GOST 22536.7-88: Carbon steel and unalloyed cast iron. Methods for determination of chromium
GOST 22536.8-87: Carbon steel and unalloyed cast iron. Methods for determination of copper
GOST 22536.9-88: Carbon steel and unalloyed cast iron. Methods for determination of nickel
GOST 24597-81: Unitized tared and piece goods cargoes. Main parameters and dimensions
GOST 2614-65: Tape of steel, spring, heat-treated cold-rolled and rolled
GOST 26663-85: Transport packets. Formation by packaging means. General technical requirements
GOST 2789-73: Surface roughness. Parameters and characteristics
GOST 29329-92: Balance for static weightings
GOST 2999-75: Metals and alloys. Vickers hardness teat by diamond pyramid
GOST 3282-74: General-purpose low-carbon steel wire. Specifications
GOST 3560-73: Sealing tepe
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 4381-87: Lever-type micrometers. General specifications
GOST 6507-90: Micrometers. Specifications
GOST 8828-89: Base paper and two-layer waterproof packaging paper
GOST 9569-79: Paraffin paper
The Document is Referenced By:
GOST 33260-2015: Pipeline valves. Мetals used in pipeline valves production. Basic requirements for choice of materials
GOST R 53843-2010: Engines of vehicles. Piston rings. Technical requirements and test methods
GOST R 55509-2013: Pipeline valves. Metals used in pipeline valves production. Basic requirements for choice of materials
OST 26-07-2027-80: Symbols of materials in the design documentation.
ST TsKBA 005.1-2003: Pipe fittings. Metals used in the valve industry. Part 1. Basic requirements for the choice of materials
ST TsKBA 070-2009: Pipe fittings. Symbol of materials in the design documentation
Customers Who Viewed This Item Also Viewed:
 |
Petroleum products. Method for measurement of viscosity by automatic capillar viscosimeter
Language: English |
Greases. Method for determination of ultimate strength and thermostrengthening
Language: English |
Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads
Language: English |
Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
Language: English |
Pipe fittings. Ball valves made of brass. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.