GOST 27339-93
ГОСТ 27339-93
|
|
Mixer trucks
Автобетоносмесители. Общие технические условия
Status: Not effective - Superseded. Registration information 1261-st dated 09/30/2016 (official website of Rosstandart); IUS 3-2017
The standard applies to truck mixers designed to receive metered components of a concrete mix and then prepare a mixture with a draft of a cone of 3 cm and a aggregate size of up to 70 mm in transit or upon arrival at a construction site, deliver the finished concrete mix and unload it to the consumer at atmospheric temperature from plus 40 to minus 40 degrees Celsius The standard does not apply to special purpose concrete mixers, as well as to mixed concrete mixers with concrete pumps, conveyors and other equipment.
Стандарт распространяется на автобетоносмесители, предназначенные для приема дозированных компонентов бетонной смеси и последующего приготовления смеси с осадкой конуса от 3 см и крупностью заполнителя до 70 мм в пути следования или по прибытии на строительный объект, доставки готовой бетонной смеси и выгрузки ее потребителю при атмосферной температуре воздуха от плюс 40 до минус 40 град. Цельсия. Стандарт на распространяется на автобетоносмесители специального назначения, а также на комбинированные автобетоносмесители с бетононасосами, конвейерами и другим оборудованием.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Committee of the Russian Federation for Standardization, Metrology and Certification,
6/2/1994
SKU: RUSS18173
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
91 Building materials and construction »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
010/2011 TR CU. On safety of machinery and equipment »
Regulations and standards (to ТР ТС ТС 010/2011) »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
018/2011 TR CU. On safety of wheeled vehicles »
Regulations and standards (to 018/2011 TR CU) »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.13 Testing and control of products of engineering industry »
4.13.2 Machines and equipment for special purposes »
4.13.2.7 Machines and equipment for construction industry »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.220 Construction equipment »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.220 Construction equipment »
National Standards for KGS (State Standards Classification) »
Latest edition »
G Machines, equipment and tools »
G4 Machinery and equipment for heavy industry »
G45 Machines and equipment for industry of building materials, construction, road and earthworks and public utilities »
National Standards for OKSTU »
CONSTRUCTION, ROAD AND UTILITY ENGINEERING PRODUCTS »
Equipment for the preparation of building mixtures »
The Document is Replaced With:
GOST 27339-2016: Truck mixer. General specifications
The Document References:
GOST 10181.2-81: Concrete mixture. Test method of determination of density
GOST 12.1.003-83: Noise. General safety requirements
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.1.012-90: SSBT. Occupational Safety Standards System. Vibrational safety. General requirements
GOST 12.2.011-75: Construction and road machines
GOST 12.4.026-76: Signal colors and safety signs
GOST 12969-67: Plates for machines and devices. Technical requirements
GOST 14192-77: Marking of cargoes
GOST 14192-96: Cargo marking
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 17.2.2.01-84: Nature protection. Atmosphere. Automobile diesels. Exhaust smoke opacity. Rates and methods of measurement
GOST 17.2.2.05-86: Environmental conservation. Atmosphere
GOST 17.2.2.05-97: Nature protection. Atmosphere. Rates and testing methods of harmful substances ejections with exhaust gases from diesel engines, tractors and agricultural machines
GOST 17822-91: Electromagnetic compatibility of technical means.
GOST 2.601-68: Unified system for design documentation. Exploitative documents
GOST 2.601-95: Operational documents
GOST 2.602-68: Unified system for design documentation. Repair documents
GOST 2.602-95: Unified system for design documentation. Repair documents
GOST 21753-76: Man -machine system control levers
GOST 22895-77: Brake systems and braking properties of vehicles. Standards of effectiveness
GOST 24028-80: Marine, locomotive and industrial diesel engines. Exhaust smoke opacity. Standard values and testing methods
GOST 24885-91: Centrifugal separators for liquids
GOST 25044-81: Technical diagnostics. Diagnosis of motor vehicles, tractors, agricultural, construction and road machinery. Basic principles
GOST 25314-82: Thermal non-destructive testing. Terms and definitions
GOST 25646-83: Exploitation of building machines. General requirements
GOST 25646-95: Service of building machines. General requirements
GOST 27435-87: External noise of motor vehicles. Permissible level and methods of measurement
GOST 27518-87: Diagnostics of items. General reguirements
GOST 7473-85: Ready-mixed concrete. Specification
GOST 7473-94: Ready-mixed concrete. Specifications
GOST 8.326-89: State system for ensuring the uniformity of measurements. Metrological certification measuring instruments
GOST 8.513-84: State system for ensuring the uniformity of measurements. Verification of measuring instruments. Organization and procedure
GOST 8769-75: Outer lighting devices for automobiles, buses, trolleybuses, tractors, trailers and semitrailers
GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements
GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations
GOST R 12.4.026-2001: Occupational safety standards system. Safety colors, safety signs and signal marking. Purpose and rules of application. General technical requirements and characteristics. Test methods
The Document is Referenced By:
Decision 88: About the Program for the development (amendment, revision) of interstate standards, the application of which on a voluntary basis ensures compliance with the technical regulations of the Customs Union
|
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Clear sheet glass. Specifications
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
