imgalt

GOST 27575-87

ГОСТ 27575-87

Men's suites for protection from general occupational pollution and mechanical effects

Костюмы мужские для защиты от общих производственных загрязнений и механических воздействий

Status: Restored in the Russian Federation for individual industries. By order of the Federal Agency for Technical Regulation and Metrology dated 01.03.2016 No. 101-st, it was restored on the territory of the Russian Federation only in relation to products delivered under the State Defense Order; IUS 6-2016

This standard applies to men's suits, consisting of a jacket and trousers or semi-overalls, intended as special clothing to protect workers from general industrial pollution and mechanical effects in various industries.

Настоящий стандарт распространяется на мужские костюмы, состоящие из куртки и брюк или полукомбинезона, предназначенные в качестве специальной одежды для защиты работающих от общих производственных загрязнений и механических воздействий в различных отраслях промышленности

Choose Language: 
Format: Electronic (pdf/doc)

Approved: USSR State Committee for Standards, 12/29/1987

SKU: RUSS18175

Price: $201.00



imgalt

The Product is Contained in the Following Classifiers:

Evidence base (TR CU, Technical Regulation of the Customs Union) » 019/2011 TR CU. On safety of personal protective equipment » Regulations and standards (to ТР ТС 019/2011) »

PromExpert » SECTION III. LABOR PROTECTION AND SAFETY » II Industrial sanitation and occupational health » 8 Personal protective equipment » 8.3 Special protective clothing »

ISO classifier » 13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY » 13.340 Protective equipment » 13.340.10 Protective clothing »

National standards » 13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY » 13.340 Protective equipment » 13.340.10 Protective clothing »

National Standards for KGS (State Standards Classification) » Latest edition » M Textile and leather materials and products » M3 Sewing products » M38 Work clothes, overalls and uniforms from fabrics »


The Document is Replaced With:

GOST 12.4.280-2014: Occupational safety standards system. Special clothing for mechanical action protection and general industrial contamination protection. General technical requirements

As a Replacement Of:

GOST 12.4.109-82: Occupational safety standards system. Men's suites for protection from general occupational pollution and mechanical effects. Specification

The Document References:

GOST 10581-82: Ready-made sewing goods and knitted garments. Marking, packing, transportation and storage

GOST 11209-85: Cotton and blended fabrics for protective clothing

GOST 12.4.031-84: Personal safety means. Determination of sort

GOST 12.4.115-82: Occupational safety standards system. Personal safety means. General requirements for marking

GOST 12.4.169-85: Occupational safety standards system. General requirements for chemical cleaning of personal protective means

GOST 12807-88: Sewing goods. Classification stitches, stitching and seams

GOST 19159-85: Army uniform. Marking, packing, transportation and storage

GOST 21790-93: Cotton and mixed fabrics for clothing

GOST 23948-80: Sewing wares. Acceptation rules

GOST 29122-91: Means of individual protection х

GOST 29298-92: Cotton and mixed fabrics for domestic use

GOST 4103-82: Ready-made sewing goods. Methods of quality control

GOST 6309-93: Cotton and synthetic threads for sewing. Specifications

GOST 9092-81: Cotton yarn for production of knitting. Specifications

OST 17-257-84: Lavsan sewing thread. Specifications.

OST 17-31-83: Metal zippers. General Specifications.

OST 17-891-86: Metal zippers. General Specifications.

The Document is Referenced By:

GOST 10018-79: Copper cyanide technical. Technical conditions

GOST 10834-76: Hydrophobizing liquid 136-41. Specifications

GOST 10887-75: Silicoorganic damping fluids 132-30. Specifications

GOST 12.4.217-2001: Occupational safety standards system. Personal protection equipment against radioactive substances and ionizing radiation. Requirements and test methods

GOST 12099-75: Copolymer BA-15 vinyl chloride and vinyl acetate. Specifications

GOST 15899-93: 1,1,2,2,-tetrafluorodibromethane (khladon 114B2). Specifications

GOST 1625-2016: Formalin for industrial use. Specifications

GOST 16295-2018: Anticorrosive paper. Specifications

GOST 16398-81: Calenderer vinyl plastic film. Specifications

GOST 2081-92: Carbamide

GOST 2-2013: Ammonium nitrate. Specifications

GOST 24211-91: Concrete additives. General technical requirements

GOST 29219-91: Fluorite concentrates for acids and ceramics. Specifications

GOST 29220-91: Fluorite concentrates for metallurgy. Specifications

GOST 30357-96: Carbons cation exchangers. Specifications

GOST 33024-2014: Public roads. Rubble and gravel from rocks. Determination of abrasion resistance in micro-Deval parameters

GOST 33026-2014: Public roads. Rubble and gravel from rocks. Determination of the content of clay in lumps

GOST 33028-2014: Public roads. Rubble and gravel from rocks. Moisture determination

GOST 33029-2014: Public roads. Rubble and gravel from rocks. Granulomere determination

GOST 33030-2014: Public roads. Rubble and gravel from rocks. Fracture determination

GOST 33031-2014: Automobile roads of general use. Crushed stone and gravel from rocks. Determination of the mineralogical-petrographic composition

GOST 33046-2014: Public roads. Rubble and gravel from rocks. Detection of organic impurities in the gravel and rubble from gravel

GOST 33047-2014: Public roads. Rubble and gravel from rocks. Determination of bulk density and of voidness

GOST 33048-2014: Public roads. Rubble and gravel from rocks. Sampling

GOST 33049-2014: Public roads. Rubble and gravel from rocks. Determination of resistance to crushing and abrasion

GOST 33050-2014: Public roads. Rubble and gravel from rocks. Determination of rock and rubble reactivity (gravel)

GOST 33051-2014: Public roads. Rubble and gravel from rocks. Determination of crushed grains in the gravel and rubble from gravel

GOST 33052-2014: Public roads. Rubble and gravel from rocks. Determination of sand equivalent

GOST 33053-2014: Public roads. Rubble and gravel from rocks. Determination of the content of lamellar (flakiness) and needle shape

GOST 33055-2014: Public roads. Rubble and gravel from rocks. Determination of the content of clay and dust in particles

GOST 33056-2014: Public roads. Rubble and gravel from rocks. Determination of the stability of the structure of the grains of rubble (gravel) against decay

GOST 33057-2014: Public roads. Rubble and gravel from rocks. Determining an average and true density, porosity and water absorption

GOST 33109-2014: Automobile roads of general use. Crushed stone and gravel from rocks. Determination of frost resistance

GOST 34199-2017: Plant protection. Requirements for the production of biological agents and other beneficial organisms

GOST 6981-94: Sulphate iron technical. Technical conditions

GOST 7524-2015: Steel grinding balls for ball mills. Specifications.

GOST 8.321-2013: State system for ensuring the uniformity of measurements. Industrial application level gauges. Calibration methods

GOST 9286-2012: Technical pentaerythritol. Specifications

GOST R 50291-92: 1,1,2,2,-tetrafluorodibromethane (Khladon 114B2). Specifications

GOST R 53949-2010: Technical potassic saltpeter. Specifications

GOST R 54922-2012: Zink concentrates. Technical specification

GOST R 55065-2012: Phenolic antioxidants. Agidol-2. Specifications

GOST R 55475-2013: Dewaxed winter and arctic diesel fuel. Specifications

GOST R 57073-2016: Biological agents for forest protection. Entomophages. General requirements for the process of laboratory production

GOST R 57094-2016: Biological agents for forest protection. General requirements for the process of small-tonnage production

GOST R 8.595-2002: State system for ensuring the uniformity of measurements. Mass of petroleum and petroleum products. General requirements to procedures of measurements

GOST R 8.595-2004: State system for ensuring the uniformity of measurements. Mass of petroleum and petroleum products. General requirements for procedures of measurements

GOST R 8.660-2009: State system for ensuring the uniformity of measurements. Industrial application level gauges. Calibration methods

GOST R 8.733-2011: State system for ensuring the uniformity of measurements. System for measuring of quantity and parameters of free oil gas. General metrological and technical requirements

GOST R 8.785-2012: State system for ensuring the uniformity of measurements. Mass of hydrocarbon condensate, liquefied hydrocarbon gas and long distillate of light hydrocarbons. General requirement for procedure (methods) of measurements

GOST R 8.787-2012: State system for ensuring the uniformity of measurements. Mass of mazut. Measurement of the fuel oil mass in railway tanks. General metrological requirements

MI 2579-2000: State system for ensuring uniformity of measurements. Tanks (tanks) of river and sea bulk vessels. Method of verification by the volumetric method

MI 2724-2002: State system for ensuring uniformity of measurements. Steel vertical cylindrical heat-insulated tanks. Method of verification by the geometric method

MI 2728-2002: State system for ensuring uniformity of measurements. The list of regulatory documents on security requirements. The order of their application in the normative documents of the ICE

MI 2800-2003: State system of measuring uniformity provision. Capacity of technological pipelines. Methodics of measuring by geometric method

MI 2801-2003: Recommendation. State system for ensuring uniformity of measurements. Capacity of oil pipelines. The method of measurement using the geometric method

MI 2950-2005: Recommendation. State system for ensuring uniformity of measurements. A lot of oil. Methods for performing measurements in horizontal tanks in the system of the main pipeline transport

MI 2951-2005: State system for ensuring uniformity of measurements. Crude oil mass. Methods of measurement in vertical tanks in the system of main pipeline transport

MI 2952-2005: State system for ensuring uniformity of measurements. Crude oil mass. Methods of measurement in railway tanks in the system of main pipeline transport

MI 2953-2005: State system for ensuring uniformity of measurements. Crude oil mass. Methods of measurement in automobile tanks in the system of the main oil pipeline transport

MI 2972-2006: State system of measuring uniformity provision. Petroleum mass. Method of measuring by the system of petroleum quantity and properties measuring system No.1005 JSC ´Shugurovskiy petrochemical plant´

MI 2975-2006: State system of measuring uniformity provision. Petroleum mass. Indirect measuring method of dynamic measurements on the registration point pump station 'Suslovo' JSC 'Uraltransnefteproduct'

MI 2992-2006: Recommendation. State system for ensuring uniformity of measurements. Buried trench tanks with capacity from 5,000 to 10,000 m3. Method of verification by the volumetric method

MI 3200-2009: Recommendation. GSE. Mass of crude oil. Methods of measuring the system of measuring the amount and parameters of crude oil at the temporary loading point of the Bayandy field at the Chamber of Commerce and Industry Usinskneftegaz OOO Lukoil-Komi

MI 3372-12: Recommendation. State system for ensuring uniformity of measurements. Oil product pipeline. Systems for measuring the quantity and quality of petroleum products. General technical and metrological requirements

ODM 218.3.045-2015: Recommendations on the construction of seamless sprayed bridge waterproofing from composite materials on reinforced concrete and steel orthotropic slabs of span structures of bridge structures, as well as on other building structures made of steel and rei

PMG 65-2003: State system for ensuring the uniformity of measurements. Rail tankers. General requirements for methods of verification by a volumetric method

POT R M-010-2000: Intersectoral labor protection rules in the production of asbestos and asbestos-containing materials and products

RMG 105-2010: State system for ensuring the uniformity of measurements. Vertical steel cylindrical tanks with thermal insulation. Procedure of verification bi geometrical method

RMG 108-2011: State system for ensuring the uniformity of measurements. Verticil reinforced-concrete tanks. Procedure of verification by volumetric method

RMG 112-2010: State system for ensuring the uniformity of measurements. Tanks of river and sea liquid cargo vessels. Procedure of verification by volumetric method

RMG 85-2009: National Measurement Assurance System. Mass of oil. Methods of measurement in railway tanks in the system of main oil pipeline transport. The main provisions

RMG 86-2009: State system for ensuring the uniformity of measurements. Mass of petroleum. Measurement procedure in vertical tanks in the main petrowire systems. Basic propositions

RMG 87-2009: National Measurement Assurance System. Mass of oil. Methods of measurement in horizontal tanks in the system of main oil pipeline transport. The main provisions

RMG 88-2009: National Measurement Assurance System. Mass of oil. Methods of measurement in motorcar tanks in the system of main oil pipeline transport. The main provisions

TU 301-05-17-89: Fluoroplast-40

TU 5767-001-01297858-02: Heat-insulating segments and half-cylinders of extruded polystyrene foam "Peno-Plex" for pipelines with a diameter of 57-1420 mm

TU 6-02-115-91: Copolymer BMK-5

TU 6-02-616-88: T-111 Resin

TU 6-14-95-2014: Clay Leukonate

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Liquid lubricating and plastic materials. Method of test for lubricating properties on four ball machine
Language: English
Price: $79.00
imgalt
Rules of development, coordination, approval and composition of technical and economic assessment for construction
Language: English
Price: $198.62
imgalt
United power system and isolated power systems. Operative-dispatch management. Frequency control and control of active power. Norms and requirements
Language: English
Price: $191.00
imgalt
Armour clothes. Classification and general technical requirements
Language: English
Price: $189.00
imgalt
Food products. Methods for detection and quantity determination of coliformes
Language: English
Price: $169.00
imgalt
Hotels design
Language: English
Price: $1,698.24
imgalt
Railroad rails. General specifications
Language: English
Price: $1,813.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!