GOST 7564-97

ГОСТ 7564-97

Rolled products general rules of samples, rough specimens and test pieces selection for mechanical and technological testing

Прокат

Status: Effective

The standard establishes the general rules for sampling, blanks and samples for tensile testing, impact bending, draft, cold bending from high-grade, shaped, sheet and broadband steel.

Стандарт устанавливает общие правила отбора проб, заготовок и образцов для испытаний на растяжение, ударный изгиб, осадку, изгиб в холодном состоянии от сортового, фасонного, листового и широкополосного проката.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Gosstandart of Russia, 4/13/1998

SKU: RUSS18234




Price: request_a_quote

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 77 Metallurgy »

ISO classifier » 77 METALLURGY » 77.040 Metal Testing »

National standards » 77 METALLURGY » 77.040 Metal Testing »

ISO classifier » 77 METALLURGY » 77.040 Metal Testing » 77.040.01 Testing of metals in general »

National standards » 77 METALLURGY » 77.040 Metal Testing » 77.040.01 Testing of metals in general »

National Standards for KGS (State Standards Classification) » Latest edition » V Metals and metal products » V0 General rules and regulations on metallurgy » V09 Test methods. Packaging. Marking »

National Standards for OKSTU » FINISHED ROLLED STEELS (INCLUDING BILL FOR EXPORT) » Marking, packaging, transportation and storage »


As a Replacement Of:

GOST 7564-73: Steel. General rules of samples, blanks and test pieces for mechanical and technological tests

The Document References:

GOST 11701-84: Metals. Methods of tensile testing of thin sheets and strips

GOST 14019-2003: Metallic materials. Bend test method

GOST 1497-84: Metals. Methods of tension test

GOST 7268-82: Steel. Method for determination of ability to mechanical aging by impact bend testing

GOST 8817-82: Metals. Upsetting test method

GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature

GOST 9651-84: Metals. Methods of tension tests at elevated temperatures

The Document is Referenced By:

GOST 10494-80: Studs for flanged connections with lens-shaped seals for pn - 10-100 MPa (100-1000 kgf/sq sm). Technical requirements

GOST 10495-80: Hexagon nuts for flange joints for pn above 10 to 100 MPa (above 100 to 1000 kgf/cm2)

GOST 1050-2013: Metal products from nonalloyed structural quality and special steels. General specification

GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications

GOST 10702-2016: Rolled high-quality structural non-alloy and alloy steel for cold forging. General specifications

GOST 10702-78: Steel bars, carbon and alloy, structural, for cold extruding and upsetting. Specifications

GOST 10791-2004: All-rolled wheels. Specifications

GOST 10884-94: Thermomechanically hardened steel bars for reinforced concrete constructions. Specifications

GOST 10885-85: Hot-rolled two-ply corrosion-resistant steel sheets

GOST 11036-75: Electrotechnical quality unalloyed steel. Specifications

GOST 11268-76: Structural thin sheets of special purpose alloyed high quality steel

GOST 11269-76: Universal rolled plates and wide strips made of special purpose structural high-grade Alloy steel

GOST 11447-80: Locking studs for Py 10-100 MPa (100-1000 kgf/cm2). Technical requirements

GOST 11474-76: Bent-steel sections. Specifications

GOST 12492.0-90: Rolled stock for agriculture machinery

GOST 14019-2003: Metallic materials. Bend test method

GOST 14119-85: Rods from precision alloys for elastic elements

GOST 1414-75: Construction steel with enhanced and high machinability

GOST 1435-99: Bars, strips and reels of tool unalloyed steel. General specifications

GOST 14637-89: Thick sheet rolled stock of normal quality carbon steel

GOST 14959-2016: Spring nonalloy and alloy steel product. Specifications

GOST 14959-79: Spring carbon and alloy steel bars. Specifications

GOST 1577-2022: Heavy-gauge plates and wide strips of structural quality steel. Technical specifications

GOST 1577-93: Plate and broadband roll stock of construction fine steel.

GOST 16523-97: Rolled sheets from quality and ordinary carbon steel for general purposes. Specifications

GOST 17066-94: Thin sheet rolled stock of high strength steel

GOST 17431-72: Powder material. M-MP alloy Sheets. Specifications

GOST 17432-72: Powder material M-MP alloy Forgings and Rods. Specifications

GOST 18228-94: Sintered metal materials excluding hard metals. Determination of transverse rupture strength

GOST 18968-73: Corrosion-resistant and high temperature steel rods and strips for steam turbine blades

GOST 19281-2014: High strength rolled steel. General specification

GOST 19281-89: Rolled steel with increased strength. General specifications

GOST 20072-74: Heat-resistant steel

GOST 20700-75: Bolts, studs, nuts and washers for flanged and anchor connections, corks and yokes with medium temperature from 0 to 650 °C. Specifications

GOST 22790-89: Assembly units and pipelines components, designed for рnom over 10 to 100 MPa (from 100 to 1000 kgf/cm2)

GOST 23304-78: Bolts, studs, nuts and washers for flanged connections for atomic power plants. Technical requirements. Acceptance. Test methods. Marking, packing, transportation and storage

GOST 23705-79: Hot-rolled and forged high-temperature alloy bars

GOST 24244-2018: Сold rolled low carbon steel sheet for enameling. Specifications

GOST 24244-80: Cold-rolled soft thin sheet steel for enameled utensils

GOST 24982-81: Sheets of corrosion-resistant, heat-resistant and high-temperature alloys

GOST 26131-84: Heat-resisting steel forgings. General specifications

GOST 27772-2015: Structural steel structure rolled products. General specifications

GOST 27772-88: structural steel structure rolled products. General specifications

GOST 28870-90: Steel. Methods tensile tests of rolled thick-plates in the thickness direction

GOST 30272-96: Black collar axles (profile stock) for 1520 mm gauge railways. Specifications

GOST 30415-96: Steel. Non-destructive testing of mechanical properties and microstructure of steel products by magnetic method

GOST 30432-96: Metal tubes. Selection of samples, tube stocks and specimens for mechanic and technological tests

GOST 30456-2021: Metal products. Steel pipes, rolled steel plates and coils. Falling load impact test method

GOST 30565-98: Hot-rolled steel shapes for machine-Building in chemical engineering and oil industry. General specifications

GOST 31385-2008: Vertical cylindrical steel tanks for oil and oil-products. General specifications

GOST 31385-2016: Vertical cylindrical steel tanks for oil and oil-products. General specifications

GOST 31622-2012: Wrought stainless steel for surgical implants. Specifications

GOST 31624-2012: Special alloy wire for connecting load-bearing and implanted members of products for organism's bones. General specifications

GOST 31625-2012: Special alloy strip and wire for connecting and implanted members of products for cardiovascular surgery. General specifications

GOST 31937-2011: Buildings and constructions. Rules of inspection and of the technical condition

GOST 32578-2013: Cranes. Metal structures. Requirements for materials

GOST 34028-2016: Reinforcing rolled products for reinforced concrete constructions. Specifications

GOST 34636-2020: Pipe billet. General specifications

GOST 398-96: Carbon steel tires for broad gauge railroads and subway rolling-stock

GOST 4041-2017: Hot-rolled thick-rolled for cold stamping from non-alloyed constructional quality steel. Technical conditions

GOST 4041-71: Rolled plates of high quality structural steel for cold stamping

GOST 4543-2016: Metal products from structural alloy steel. Specification

GOST 4543-71: Structural alloyed steel

GOST 5058-65: Low-alloy constructional steel. Grades and general technical requirements

GOST 5257-98: Rough carbon steel tyres for tramway rolling stock. Specifications

GOST 5267.0-90: Hot-rolled sections for car building. General specifications

GOST 535-2005: Common quality carbon steel bar and shaped sections. General specifications

GOST 535-88: Common quality carbon bar and shaped sections. General specifications

GOST 5422-73: Hot-rolled special steel sections for tractors. Technical specifications

GOST 5520-2017: Rolled plate of unalloyed and alloyed steel for boilers and vessels working under pressure. Technical conditions

GOST 5520-79: Carbon, low-alloy and alloy sheet steel for boilers and pressure vessels. Specifications

GOST 5521-93: Shipbuilding rolled steel

GOST 5582-75: Corrosion-resistant, heat-proof, and heat-resistant thin-sheet rolled stock

GOST 5781-82: Hot-rolled steel for reinforcement of ferroconcrete structures. Specifications

GOST 5949-2018: Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications

GOST 5949-75: Gauged corrosion-resistant, heat-resistant and high-temperature steel shape

GOST 6713-91: Low-alloyed structural rolled stock for bridge building. Specifications

GOST 7268-82: Steel. Method for determination of ability to mechanical aging by impact bend testing

GOST 7350-77: Plate, corrosion-resistant, heat-resistant, and high-temperature steel

GOST 801-2022: Rolled bearing steel. Technical conditions

GOST 801-78: Bearing steel. Specifications

GOST 8536-79: Blanks for marine shafts and rudder stocks. Specifications

GOST 8696-74: General-purpose electrically welded spiral seam steel pipes. Specifications

GOST 8851-75: Steel strip of grades 11kp and 11yua

GOST 9045-93: Cold-rolled thin sheets of low-carbon steel for cold stamping. Specifications

GOST 9399-81: Threaded steel flanges for Pn 20-100 MPa (200-1000 kgf/sq sm). Specifications.

GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature

GOST R 50.04.02-2018: Conformity assessment system for the use of nuclear energy. Conformity assessment in the form of testing. Qualification testing of heat treatment processes

GOST R 50.04.04-2018: Conformity assessment system for the use of nuclear energy. Conformity assessment in the form of testing. Qualification testing for technologies of working procedures by pressure

GOST R 50.04.05-2018: Conformity assessment system for the use of nuclear energy. Conformity assessment in the form of testing. Qualification testing for the steels and alloys melting and casting procedures

GOST R 50566-93: Steel wire for mechanical springs. General requirements

GOST R 51349-99: Floor mounted lift trucks. Load plates, fork. Specifications

GOST R 51394-99: Wrought stainless steel for surgical implants. Specifications

GOST R 51396-99: Special alloy wire for connecting load-bearing and implanted members of products for organism's bones. General specifications

GOST R 51397-99: Special alloy strip and wire for connecting and implanted members of products for cardiovascular surgery. General specifications

GOST R 52246-2004: Hot-dip zinc-coated steel sheet. Specifications

GOST R 52246-2016: Hot-dip zinc-coated steel sheet. Specifications

GOST R 52910-2008: Vertical cylindrical steel tanks for oil and oil-products. General specifications

GOST R 52927-2008: Rolled stock of normal, increased- and high-strength steel for shipbuilding. Specifications

GOST R 52927-2015: Rolled of normal, increased - and high-strength steel for shipbuilding. Specifications

GOST R 53778-2010: Buildings and constructions. Rules of inspection and monitoring of the technical condition. General requirements

GOST R 53932-2010: Tube billet. General specifications

GOST R 54523-2011: Port hydraulic structures. Rules of inspection and monitoring of the technical condition

GOST R 54786-2011: Fastening parts for detachable connections of nuclear power plants. Specifications.

GOST R 54803-2011: High-pressure welded steel vessels. General technical requirements

GOST R 55374-2012: Alloyed structural rolled steel for bridge building. General specifications

GOST R 55429-2013: Hoop-in detachable joints of pipelines. Design, dimensions and general specifications

GOST R 55567-2013: The order of the organization and conducting technical engineering studies on researches on objects of cultural heritage. Monuments of history and culture. General requirements

GOST R 55599-2013: High pressure pipeline assembly units and components above 10 up to 100 MPa. General technical requirements

GOST R 56299-2014: Rolled products from bearing steel. Specifications

GOST R 56354-2015: Cold formed sheet piling of non alloy steels. Specifications

GOST R 57179-2016: Thermite welding of rails. The method of testing and quality control

GOST R 57180-2016: Welding joints. Methods for determination of mechanical properties, macrostructure and microstructure

GOST R 57208-2016: Tunnels and subways. Rules of inspection and elimination of defects and damages under operation

GOST R 57837-2017: Hot-rolled steel I-beams with parallel edges of flanges. Specifications

GOST R 58177-2018: United power system and isolated power systems. Thermal power plants. Thermal-mechanical equipment of thermal power plants. Control of condition of metal. Norms and requirements

GOST R 58385-2019: Cold-rolled steel profiles for construction. Technical specifications

GOST R 58389-2019: Bent steel sheet profiles with trapezoidal corrugations for steel-reinforced concrete structures. Technical specifications

GOST R 58915-2020: Rolled plates of cryogenic steels. Specifications

GOST R 58953-2020: Rolled sheet metal for folded roofs and facades. General specifications

MDS 11-17.2004: Rules for the inspection of buildings, structures and complexes for liturgical and auxiliary purposes

MDS 13-20.2004: Comprehensive methods for the inspection and energy audit of reconstructed buildings. Design Guide

ODM 218.2.044-2014: Recommendations for the performance of instrument and instrumental measurements in assessing the technical condition of bridge structures on highways

OST 24.201.03-90: Steel high-pressure vessels and devices. General technical requirements.

PNST 594-2022: Oil and gas industry. Underwater production systems. Metallic materials

PNST 595-2022: Oil and gas industry. Underwater production systems. General characteristics and rules of application of structural steels for building structures

RD 03-380-00: Guidelines for Inspection of Spherical Tanks and Gas Holders for Storage of Liquefied Gases Under Pressure

RD 03-410-01: Instructions on the procedure of comprehensive engineering certification of cryogenic tanks for liquefied gases

RD 10-112-2-09: Methodological guidelines for expert examination of hoisting equipment. Part 2: General purpose boom cranes and articulated hoisting cranes.

RD 153-34.1-21.530-99: Procedural Guidelines for Inspection of Structural Elements of Process Buildings and Structures of Thermal Power Stations. Part 2: Metal Structures

RD 22-16-2005*: Guiding regulatory material. Hoisting machines. Selection of materials for the manufacture, repair and reconstruction of welded steel structures

RD 24.200.04-90: Weld seams. Metallographic method of control of the base metal and welded joints of chemical oil equipment

SDOS-04-2009: Construction control. Methodology for conducting construction control during construction, reconstruction, overhaul of capital construction facilities

SNiP 3.06.07-86: Bridges and Pipes. Rules for Inspection and Testing

SP 13-102-2003: Rules of inspection of bearing structures of buildings and facilities

SP 329.1325800.2017: Buildings and structures. Rules of inspection after the fire

SP 34-101-98: Selection of pipes for main oil pipelines during construction and repair

SP 394.1325800.2018: Buildings and complexes are high-rise. Terms of Use

ST TsKBA 010-2004: Pipe fittings. Forgings, stampings and rolled products. Technical requirements

ST TsKBA 012-2005: Pipe fittings. Studs, bolts, nuts and washers for pipe fittings. Technical requirements

TU 108.11.853-87: Procurement of parts from purchased long products

TU 13.03-011-00212179-2003: Spiral-welded electric-welded pipes made of carbon steel 20 for pipelines of nuclear power plants. Technical conditions

TU 1381-003-47966425-2006: Steel electric-welded steel pipes with an outer diameter of 610 - 1420 mm for gas pipelines for operating pressures up to 9.8 MPa

TU 14-158-116-99: Steel electric-welded longitudinal pipes of increased corrosion resistance and cold resistance for gas and oil pipelines

TU 14-3-1573-96: Steel electric welded longitudinal pipes with a diameter of 530-1020 mm with a wall thickness of up to 32 mm for main gas pipelines, oil pipelines and oil product pipelines

TU 5851-008-01388383-2002: Reinforced concrete beams with frame fittings for the superstructure of road bridges and overpasses with a length of 12, 15 and 18 m. Specifications

Customers Who Viewed This Item Also Viewed:

Loads and impacts
Language: English
Price: $306.00
Pipeline valves. Methods of control and testing
Language: English
Price: $417.00
Steel grinding balls for ball mills. Specifications.
Language: English
Price: $217.00
Occupational safety standards system. Power frequency electric fields. Permissible levels of field strength and requirements for control at work-places
Language: English
Price: $67.00
Three-phase asynchronous motors. General specifications.
Language: English
Price: $397.00
Occupational safety stаndards system. Vibration safety. General requirements
Language: English
Price: $178.00
Rotating electrical machines. Rating and performance
Language: English
Price: $518.00
Steel. Metallographic methods for the determination of non-metallic inclusions
Language: English
Price: $261.00
State system for ensuring the uniformity of measurements. Platinum, copper, and nickel resistance resistive temperature transducers. General requirements and test methods
Language: English
Price: $240.00
Rotating electrical machines. Noise limits
Language: English
Price: $138.00
Electromagnetic compatibility of technical equipment. Technical equipment for nuclear power plants. Requirement and test methods
Language: English
Price: $147.00
Centrifugal pumps. Technical specifications. Class I
Language: English
Price: $543.00
Rotodynamic pumps. Test methods
Language: English
Price: $659.00
Construction in seismic regions
Language: English
Price: $553.00

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!