imgalt

GOST 8486-86

ГОСТ 8486-86

Coniferous sawn timber. Specifications

Пиломатериалы хвойных пород Технические условия

Status: Effective - Supersedes. IUS 12-1986 The limitation of effectiveness has been lifted: Protocol No. 3-93 of the IGU dated 03/12/93 (IUS 5-6-1993)

The standard applies to softwood lumber and establishes technical requirements for lumber intended for use in the national economy and for export.

Стандарт распространяется на пиломатериалы хвойных пород и устанавливает технические требования к пиломатериалам, предназначенным для использования в народном хозяйстве и на экспорт.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: USSR State Committee for Standards, 9/30/1986

SKU: RUSS18243

Price: $129.69



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 79 Wood processing technology »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.6 Testing and control of wood products » 4.6.1 Sawmill products »

ISO classifier » 79 WOOD PROCESSING TECHNOLOGY » 79.040 Wood, saw logs, sawn timber »

National standards » 79 WOOD PROCESSING TECHNOLOGY » 79.040 Wood, saw logs, sawn timber »

National Standards for KGS (State Standards Classification) » Latest edition » To Timber. Wood products. Cellulose. Paper, cardboard » K2 Lumber and wood products » K21 Lumber »


As a Replacement Of:

GOST 8486-66: Lumber from softwood

The Document References:

GOST 10950-78: Sawn timber and semi-manufactures. Antiseptic methods of immersion

GOST 16369-96: Sawn timber transportation packages. Sizes

GOST 18288-87: Manufacture of sawn timber. Terms and definitions

GOST 19041-85: Transportation packages and multi-packages of sawn timber. Packaging, marking, transportation and storage

GOST 2140-81: Visible defects, of wood. Classification, terms and definitions, methods of measurement

GOST 24454-80: Sawn timbers of coniferous species

GOST 26002-83: Coniferous sawn timber of northern grading supplied for export

GOST 3808.1-80: Lumber from softwood

GOST 6564-84: Lumbers and blanks

GOST 7016-82: Products of wood and wooden materials. Parameters of surface roughness

GOST 8486-66: Lumber from softwood

GOST 9302-83: Coniferous sawn timber of the Black Sea grading supplied for export. Specifications

The Document is Referenced By:

GOST 10198-91: Wooden boxes for weights of mass over 200 up to 20000 kg. General specifications

GOST 10280-83: Electrical household vacuum cleaners

GOST 10316-78: Foil coated paper-based laminate and glass-cloth-base laminate. Specifications

GOST 10350-81: Wooden cases for light industry produce. Specifications

GOST 10597-87: Painting brishes. Specifications

GOST 10950-2013: Coniferous sawn timber. Antiseptic surface treatment

GOST 11002-80: Wooden cases reinforced with wire. General specifications

GOST 11127-78: Wooden drums for wire ropes. Specifications

GOST 11142-78: Plate boxes for personal defense means. Specifications

GOST 11214-2003: Windows of wood with glass. Specifications

GOST 112-78: Meteorological glass thermometers

GOST 11354-93: Returnable cases of wood and wood materials for food-stuffs and agricultural products. Specifications

GOST 1142-90: Horse-driven load carriages. Specifications

GOST 12.2.012-75: Occupational safety standards system. Devices to ensure the safety of works. General requirements

GOST 12.4.059-89: Occupational safety standards system. Construction. Protective inventory safeguards. General specifications

GOST 12082-82: Roof boarding for consignments up to 500 kg. General specifications

GOST 13276-79: Overhead line hardware. General specifications

GOST 13354-91: Gated wooden patterns. Specifications

GOST 13715-78: Glued boards. Specifications

GOST 13932-80: Combined arbor-type circular mills for woodcutting

GOST 14225-83: Wooden cases

GOST 14918-80: Continuously galvanized sheet steel. Technical conditions.

GOST 15102-75: Universal metallic closed container of nominal gross mass 5,0 tn. Specifications

GOST 15623-84: Wooden cases for tools and accessories. Specifications

GOST 15987-91: Wooden bodied planes

GOST 16148-79: Wooden boxes for rolling bearings. Specifications

GOST 16511-86: Wooden boxes for electrical equipment. Specifications

GOST 16870-83: Removable boards for troops. Specifications

GOST 17151-2019: Utensils made of sheet aluminum. General specifications

GOST 17151-81: Cooking utensils made

GOST 17812-2022: Multi-turn wooden crates for vegetables and fruits. Specifications

GOST 17812-72: Multi-use wooden cases for vegetables and fruits. Specifications

GOST 18051-83: Wooden containers for heat-insulating materials and products

GOST 18088-83: Metal-cutting, diamond, wood-cutting and fitter's tools. Packing, marking, transportation fitter and auxiliary

GOST 18128-2018: Timber framed asbestos cement exterior wall panels supplied with insulation. Specifications

GOST 1824-88: Elements and assembly units of upper wooden construction of bridging parks. General specifications

GOST 18343-80: Pallets for bricks and hollow clay tiles

GOST 18479-73: Planer-type circular saws for sawing of wood. Technical conditions

GOST 18481-81: Glass hydrometers and cylinders. General specifications

GOST 18573-86: Wooden boxes for the production of chemical industry

GOST 18617-83: Wooden cases for hardware. Specifications

GOST 18711-96: Tent wooden members and assembly units. General specifications

GOST 18853-73: Swing wooden gates for industrial buildings and structures. Specifications

GOST 19041-85: Transportation packages and multi-packages of sawn timber. Packaging, marking, transportation and storage

GOST 19597-94: Garden rakes

GOST 19598-95: Lawn-and-garden hoes, grub-axes and cultivators

GOST 19822-88: Industrial container. Specifications

GOST 20259-80: Universal containers

GOST 20435-75: Universal metallic closed container of nominal gross mass 3,0 tn. Specifications

GOST 20463-75: Wooden cases reinforced with wire for vegetables and fruit. Specifications

GOST 20740-75: Beehives. Specifications

GOST 20850-2014: Wooden glued load bearing structures. General specifications

GOST 20850-84: Wooden laminated structures. General specifications

GOST 21133-87: Specialized box pallets for potatoes, vegetables, fruits, melons and gourds

GOST 21399-75: Transport packs of non-ferrous metal pigs, cathodes and ingots. General requirements

GOST 21562-76: Metal-faced building panels with foam plastic thermal insulation. General specifications

GOST 22322-77: Linings for item packaging in wooden packing. General specifications

GOST 22689.0-89: Polyethylene waste-pipes and fittings. General specification

GOST 22749-77: Form-relieved milling cutters

GOST 22831-77: Flat timber pallets gross weight 3,2 t, dimensions 1200x1600 and 1200x1800 mm. Specifications

GOST 22999-88: Portable hand-driven sprayers

GOST 23190-2018: Book-selling furniture. General specifications

GOST 23190-78: Bookselling furniture. General requirements

GOST 23478-79: Form for monolithic concrete and reinforced concrete structures erection. Classification and general technical requirements

GOST 23508-2018: Book-selling furniture for storage facilities. General specifications

GOST 23508-79: Bookselling furniture for storage compartments. General specifications

GOST 23707-95: Small tools for tillage

GOST 23708-84: Sets of floor equipment for poultry breeding and keeping

GOST 23833-95: Commercial refrigeration equipment

GOST 23848-79: Motion-picture projectors for 16, 35 and 70 mm films. Marking, packing, transportation and storage

GOST 24634-81: Wooden boxes for export products. General specifications

GOST 24699-2002: Windows of wood with glass and glassing units. Specifications

GOST 24700-99: Windows of wood with glassing units. Specifications

GOST 25097-2002: Windows from wood and aluminium. Specifications

GOST 25458-82: Wooden (timber) posts for road signs. Specifications

GOST 25782-90: Derbies, floats, semifloats. Specifications

GOST 26215-84: Hand-held wood-saws

GOST 26363-84: Power generating sets and mobile electric power stations with internal combustion engines. Rules of marking, parking, transportation and storage

GOST 26381-84: Disposable flat pallets general specifications

GOST 26598-2018: Containers and means of packaging in building. General specifications

GOST 26598-85: Containers and means of packaging in building industry

GOST 26600-98: Navigation waterways signs. General specifications

GOST 26665-91: Metal bodied planes. Technical specifications

GOST 26665-97: Metal bodies planes. Specification

GOST 27321-2018: Demountable tubular scaffold for constructional works. Specifications

GOST 27321-87: Demountable tubular scaffold for construction works. Specification.

GOST 27840-2022: Packaging for parcels and packages. General technical conditions

GOST 27840-93: Containers for postal packages and parcels

GOST 28012-89: Demountable travelling stage. Specifications

GOST 28427-90: Electric lamps and starters. General requirements for export

GOST 28469-90: Wooden laminated sleepers and cants for tram lines. Specifications

GOST 28638-90: Bristle brush articles for household use. General specifications

GOST 2991-85: Wooden uncollapsible cases for weights up to 500 kg. General specifications

GOST 30091-93: Woodworking machines. Circular rip saws. Basic parameters. Standards of accuracy

GOST 30734-2000: Roof wooden window blocks. Specifications

GOST 30972-2002: Glue wood billets and details for windows and doors. Specifications

GOST 3191-82: Railway cars of 1520 mm track gauge. Parts of wood and wooden materials. General specifications

GOST 3191-93: Railway cars of 1520 mm track gauge. Parts of wood and wooden materials. General specifications

GOST 3251-91: Rubber fabric oil-cloth lining

GOST 33080-2014: Timber structures. Strength classes of structural sawn timber and methods of its determination

GOST 33757-2016: Flat wooden pallets. Specification

GOST 34329-2017: Formworks. General specifications

GOST 34378-2018: Translucent enclosing structures. Windows and doors. Installation work execution, check and demands for results of works

GOST 34635-2020: Fire-fighting equipment. Generators of fire-extinguishing aerosol. General technical requirements. Test methods

GOST 34914-2022: Windows for industrial buildings. General technical conditions

GOST 3808.1-2019: Softwood lumber and blanks. Atmospheric drying and storage

GOST 3808.1-80: Lumber from softwood

GOST 4295-80: Boxes made of boards for sheet glass

GOST 475-2016: Door Blocks wooden and combined. General specifications

GOST 4981-87: Wooden joists. Specifications

GOST 5151-79: Wooden drums for electrical cables and wires. Specifications

GOST 5959-80: Uncollapsable wooden sheet material boxes for weights to 200 kg mass. General specifications

GOST 6532-77: Band saws for sawing of wood. Specifications

GOST 6564-84: Lumbers and blanks

GOST 6658-75: Products of paper and cardboard

GOST 7307-2016: Parts of wood and of wood materials. Machining allowances

GOST 7307-75: Details from wood and wood materials. Allowances for machining

GOST 7566-2018: Metal product. Rules of acceptance, marking, packing, transportation and storage

GOST 9.510-93: Unified system of corrosion and ageing protection. Aluminium and aluminium alloys semifinished products. General requirements for temporary anticorrosive protection, packing, transportation and storage

GOST 9078-84: Flat pallets

GOST 9338-2022: Plywood drums. Technical specifications

GOST 9338-80: Plywood drums. Specifications

GOST 9371-90: Timber laminated switch sleepers for wide rail track. Specifications

GOST 9396-88: Boxes wooden reusable

GOST 9570-2016: Box and pestpallets. General specifications

GOST 9570-84: Box and post pallets

GOST 9574-2018: Gypsum сoncrete panels for partitions. Specifications

GOST 9574-80: Gypsum concrete panels for partitions. Specifications

GOST 9574-90: Gypsum concrete panels for partitions. Specifications

GOST 968-68: Sawn timbers (bars and boards) for aircraft

GOST 980-80: Flat ring saws for wood sawing

GOST R 12.3.050-2017: Occupational safety standards system. Construction. Works at height. Safety regulations

GOST R 50054-92: Bridge timbers laminated beams. Specifications

GOST R 50982-2019: Fire fighting equipment. Tool for special work in fires. General technical requirements. Test methods

GOST R 51017-2009: Fire engineering. Wheeled fire extinguishers. General technical requirements. Test methods

GOST R 51017-97: Fire engineering. Wheeled fire extinguishers. General technical requirements. Test methods

GOST R 51057-2001: Fire fighting equipment. Portable fire extinguishers. General technical requirements. Test methods

GOST R 51057-97: Fire engineering. Portable fire extinguishers. General technical requirements. Test methods

GOST R 51876-2002: Series 1 freight containers. Technical requirements and test methods. Part 1. General purpose containers

GOST R 51876-2008: Series 1 freight containers. Technical requirements and test methods. Part 1. General-purpose containers

GOST R 52085-2003: Formworks. General specifications

GOST R 53280.4-2009: Automatic fire extinguishing systems. Extinguishing medium. Part 4. Dry fire extinguishing powders. General technical requirements and test methods

GOST R 53286-2009: Fire engineering. Automatic dry chemical fire fighting system. Module. General technical requirements. Test methods

GOST R 53288-2009: Automatic water and foam extinguishers systems. Automatic fire water mist spray extinguishers systems. Modules. General technical requirements. Test methods

GOST R 53291-2009: Portable and movable devices of fire extinguishing with high-velosity submission of fire quenching matter. General technical requirements. Test methods

GOST R 54577-2011: Modified wood. Specifications

GOST R 54912-2012: Modified wood for bear of slide. Specifications

GOST R 55658-2013: Panels wall with the wooden framework. Specifications

GOST R 55760-2013: Generating sets driven by internal combustion engines. Rules of marking, packing, transportation and storage

GOST R 56071-2014: Products and billets of wood and wood materials for cultural and household use. Specifications

GOST R 56706-2015: Glued cross laminated timber boards. Specifications

GOST R 56706-2022: Cross-laminated wood boards. General technical conditions

GOST R 56710-2015: Connections on the pasted cores for wooden structures. Specifications

GOST R 56985-2016: Safety of amusement rides. Kart slides. General safety requirements

GOST R 57031-2016: Building timber structures. Rules of strength grading of sawn timber

GOST R 57380-2017: Extinguishing thrown water-based capsule. General technical requirements. Test methods

GOST R 57786-2017: Wooden glued laminated bearing structures. Visual sorting of laminates to strength classes

GOST R 58459-2019: Wooden structures. Determination of normative and calculated values ​​of the mechanical properties of wood and materials based on it

GOST R 58516-2019: Paint brushes and brushes. Technical conditions

GOST R 58519-2019: Rules, graters and graters. Technical conditions

GOST R 58559-2019: Wooden structures. Metal gear keys. Test methods

GOST R 58562-2019: Wooden structures. Metal ring keys. Test methods

GOST R 58699-2019: Wood-aluminum window blocks. Technical conditions

GOST R 58700-2019: Wooden windows and balcony doors for low-rise residential buildings. Types, Design and Dimensions

GOST R 58739-2019: Roofing works. Installation of roofs with metal roofing. Rules and control of work

GOST R 58744.1-2019: Inland water transport. Infrastructure facilities. Embankments, retaining walls thin-walled (sheet pile). Basic requirements for calculation and design

GOST R 58745.1-2019: Inland water transport. Infrastructure facilities. Embankments, retaining walls semi-gravity and gravity. Basic requirements for calculation and design

GOST R 58755-2019: Mobile scaffolds, collapsible. Technical specifications

GOST R 59687-2022: Metal panels with foam insulation. General technical specifications

GOST R 70340-2022: Roofing works. Installation of roofs with a roof of asphalt shingles. Rules and control of the work

GOST R 70342-2022: Roofing works. Installation of roofs with roofs of ceramic and cement-sand tiles. Rules and control of the work

GOST R 70364-2022: Public roads. Concretes for construction of base layers and pavements. Rules of manufacture of works

Manual: Manual for impulse and low consumption fire extinguishing systems

Manual for SNiP 3.04.01-87: Recommendations on the arrangement of floors (in development of SNiP 3.04.01-87 "Insulating and finishing coatings")

MDS 12-22.2005: Recommendations for the application in the construction industry of the requirements of regulatory legal and other regulatory acts containing state regulatory labor protection requirements

MDS 12-25.2006: Scaffolding. Installation, calculation, and operation

MDS 12-58.2011: Scaffolding. Manufacturing, installation, operation

MDS 81-39.2005: Individual elemental estimate of the consumption rate of materials and labor costs for the finishing of the premises with KNAUF complete systems. Standard flow charts for finishing works using KNAUF complete systems. Volume 1. Individual elemental estimat

NPB 155-96: Fire engineering. Portable fire extinguishers. General reguirements and Test Methods

NPB 156-96: Fire engineering. Wheeled fire extinguishers. General reguirements and test methods

NPB 170-98*: Extinguishing powder for general purposes. General technical requirements. Test methods

NPB 305-2001: Fire engineering. Charge of foam extinguishers and foam fire fighting sistems. General technical requirements and test methods

NPB 316-2003: Portable and movable devices of fire extinguishing with high-velocity submission of fire quenching matter. Requirements of fire safety. Test methods

NPB 67-98: Automatic dry chemical fire fighting systems. Module. General technical requirements and test methods

NPB 80-99: Automatic fire water mist spray extinguishing systems. modules. General technical requirements. Test methods

ODM 218.2.017-2011: Guidelines Design, construction and operation of roads with low traffic

ONTP 02-86: National Engineering Design Standards for Machine-Building, Instrument-Building, and Metalworking Facilities. Woodworking Shops

ONTP 02-94: Sectoral norms of technological design of enterprises in the automotive industry. Woodworking shops (sites)

ONTP 444-86: National Engineering Design Standards for Facilities for the Production of Mineral Wool Products and Building Components

OSN-APK 2.10.16.001-04: Instructions for the manufacture and quality control of glued wooden structures for industrial agricultural buildings (in the development of SNiP II-25-80)

OST 13-15-79: Cutting boards for foods. Specifications

OST 13-158-83: Wooden returnable and reusable furniture container. Technical specifications.

OST 13-160-86: Corrugated cardboard boxes for furniture. Specifications

OST 13-39-80: Products of cultural and community purpose, for kitchen and household use of wood and wood materials. General specification

OST 24.013.20-90: Forged steel rollers for cold rolling of metals. Specifications.

OST 24.070.01-86: Products of mining machinery. General technical requirements.

OST 45.85-96: Wooden and metal shelf stands for electric power storages applied by telecommunication enterprises. General requirements.

POT R M-012-2000: Industry-Wide Occupational Safety and Health Requirements for Work at Heights

POT R O 97300-01-95: Labor protection rules in the production of crop products

POT R O-97300-016-98: Rules on labor protection. Beekeeping

POT R O-97300-08-96: Rules on labor protection in animal husbandry. Pig breeding

POT R O-97300-09-96: Rules on labor protection in animal husbandry. Sheep and goat breeding

POT R O-97300-11-97: Rules for labor protection in the repair and maintenance of agricultural machinery

RD 10-117-95: Requirements for Installation and Safe Operation of Rail Tracks of Gantry Cranes

RD 22-28-35-99: Design, construction and safe operation of the rail tracks of tower cranes

RD 31.31.55-93: Instruction on designing the marine jetty and coast-protecting structures

RD 31.35.13-90: Instructions for repair of hydraulic structures in maritime transport. Minmorflot, Soyuzmorniiproekt, 1990

RD 31.41.04-79: Part 4. Cards of typical and experimental technological processes of transshipment operations with dangerous goods

RD 31.44.06-89: Low loader semi-trailers. Repair Specifications

RD 31.83.04-89: Labour safety rules in companies of the Ministry of Navy of the USSR.

RD 34 02.028-2007: Technical rules. Mechanical equipment and special steel structures for hydraulic structures. Manufacturing, installation and acceptance.

RD 34.03.204: Safety rules when working with tools and accessories

RD 34.10.306-88: Material allowances for repairs. Stationary steam boilers.

RD 34.10.351: Specified Quantity Allowances for Materials for Repair of Turbine Generators

RD 34.26.203: Guidelines for Brick Lining Work During Installation of Boiler Plants and Energy Facilities

RD 34.26.603: Guide to Use of Scaffolding and Cradles for Steam Boiler Repair

RD 34.46.605: Transformers at Voltage of 110-1150 kV, with Power of 80 MVxA and Above

RD 50:48:0075.01.05: Recommendations on organization and safe operation of ground gantry rails.

Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope

Resolution 2128: On the procedure for determining the characteristics of timber and timber accounting

RMD 12-21-2013 Sankt-Peterburg: Typical temporary means of fencing, arranging and decorating construction sites

RMD 23-16-2012 Sankt-Peterburg: Recommendations for energy efficiency in residential and public buildings

RST RSFSR 161-88: Cooper products. General technical conditions

RST RSFSR 508-75: Electric Guitar. General technical requirements

RST RSFSR 516-88: Eaves metal. Technical conditions

RST RSFSR 655-81: Ice screws fishing. General technical conditions

SN 251-78: Instructions for the design of railways 750 mm gauge

SNiP 3.08.01-85: Construction mechanical means. Rail tracks for tower cranes

SNiP II-A.7-71: Building heat engineering. Design Standards

SNiP II-B.7-70: Foundations of machines with dynamic loads

SO 002-02495342-2005: Roofs of buildings and structures. Design and construction. Standard of organization

SP 12-103-2002: Tracks for ground rail cranes. Design, installation and operation

SP 163.1325800.2014: The designs with application of gypsum plasterboards and gypsum fiber sheets. Terms of design and installation

SP 17.13330.2011: Roofs

SP 17.13330.2017: The roofs

SP 23-101-2000: Design of thermal performance of buildings

SP 23-101-2004: Design of thermal protection of buildings

SP 26.13330.2012: Foundations for machines with dynamic loads

SP 287.1325800.2016: Marine berthing facilities. Rules of design and construction

SP 299.1325800.2017: Ventilation systems of highway tunnels. Design rules

SP 31-105-2002: Design and construction of energy-efficient single-family houses with wooden frame

SP 314.1325800.2017: Tracks overland rail cranes. Design, arrangement and exploitation

SP 35.13330.2011: Bridges and pipes. Updated living edition of SNiP 2.05.03-84

SP 43.13330.2012: Structures for industrial installations

SP 452.1325800.2019: Residential multi-apartment buildings with the use of wooden structures. Design rules

SP 46.13330.2012: Bridges and pipes

SP 55-102-2001: Structures made with gypsum fiber sheets

SP 64.13330.2011: Wooden structures.

SP 64.13330.2017: Timber structures

ST RK 1489-2005: Fire fighting equipment. Fire extinguishing aerosol generators. General technical requirements. Test methods

TU 102-124-77: Aluminum hinged panels for BNP type boxes

TU 102-152-77: Two-layer metal coating panels without a soft waterproofing carpet for industrial buildings (type ППДС)

TU 102-162-78: Weighers prefabricated reinforced concrete belt type UBP

TU 102-190-78: Aluminum frame panels for walls of heated industrial buildings

TU 102-236-80: Panels of volume blocks of type OB and boxes of type UB

TU 102-237-85: Mobile buildings (inventory) of the block of the "Watch" system. Group specifications

TU 102-339-83: Asbestos-cement three-layer partition walls on a wooden frame with mineral wool plates

TU 102-391-84: Bath-sauna panel on solid fuel

TU 102-46-75: Weights prefabricated cantilever type UKS

TU 102-529-89: Mobile buildings (inventory) of the block-containers of the panel construction of the Neftegazstroy system

TU 102-587-91: Production-auxiliary box

TU 13-3225000-009-89: Soft reusable inventory container for furniture. Technical conditions

TU 13-533-83: Non-separable plank laths for furniture packing. Technical conditions

TU 34-38-20188-94: Frameworks, stairs and platforms of stationary boilers. General technical conditions for major repairs

TU 34-38-20191-94: Headset stationary boilers. General technical conditions for major repairs

TU 34-5831-71: Cold-bent galvanized steel. Corrugated profiles with trapezoidal corrugation. Technical conditions

TU 5361-002-39430024-07: Hardwood boards

TU 5366-002-50189474-07: Structural panels of chipboard with oriented chips and effective insulation for low-rise construction

TU 5369-004-54965805-05: Wooden glued blanks and details for interior decoration

TU 5369-005-54965805-05: Sets of parts and products wooden for collapsible saunas

TU 5712-005-04002183-96: Promperlit (Semi-Rigid Perlite Thermal Insulation). Technical Specifications

TU OP 13-0255095-29-91: The box is economic. Technical conditions

VSN 136-78/Mintransstroj: Instructions for the design of auxiliary structures and devices for the construction of bridges

VSN 16-89: Industry-Specific Specified Quantity Allowances for Materials. Drilling and Blasting Operations

VSN 203-84: Safety Requirements for the Construction of Hi-Rise Reinforced Concrete Structures

VSN 462-85: Use of Cast Polyurethane Foam for Thermal Insulation of Piping and Equipment

VSN 94-77: Railway Track Construction Guidelines

VSN 9-94: Flooring Guidelines for Residential and Public Buildings

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Seamless hot-deformed steel pipes. Specifications
Language: English
Price: $57.42
imgalt
Seamless hot-deformed steel pipes. Range of sizes
Language: English
Price: $77.22
imgalt
Processing equipment and process pipelines
Language: English
Price: $155.43
imgalt
Instructions on Designing of Steel Process Piping, Рnom up to 10 MPa
Language: English
Price: $320.76
imgalt
Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
Language: English
Price: $262.35
imgalt
Federal norms and rules in the field of the use of atomic energy. Valves for nuclear power plants. General technical requirements
Language: English
Price: $1,478.07
imgalt
Unified system for design documentation. Diagrams. Kinds and types. General requirements for fulfillment.
Language: English
Price: $121.77
imgalt
Chemically resistant and heat resistant ceramic wares. The method for determination of heat resistance
Language: English
Price: $34.65
imgalt
Unified system for program documentation. Types of programs and program documents
Language: English
Price: $55.44
imgalt
Petroleum products. Method of test for water-soluble acids and alkalies
Language: English
Price: $48.51
imgalt
Unified system for design documentation. Repair documents
Language: English
Price: $196.02
imgalt
Chemical production safety passport. General requirements
Language: English
Price: $90.09
imgalt
Unified system for design documentation. Exploitative documents
Language: English
Price: $296.01
imgalt
Unified system for design documentation. Types and sets of design documentation
Language: English
Price: $137.61
imgalt
Food products. Methods for detection and quantity determination of coagulase-positive staphylococci and Staphylococcus aureus
Language: English
Price: $223.74
imgalt
Process piping. Standard for the stress, vibration and seismic analysis
Language: English
Price: $879.12
imgalt
Pipeline valves for nuclear stations. General specifications
Language: English
Price: $1,908.72
imgalt
Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements
Language: English
Price: $703.89
imgalt
Valves of pipeline technological systems of nuclear power plants, not affecting safety. General technical requirements
Language: English
Price: $523.71
imgalt
Fish products. Canned tuna and bonito in water or oil
Language: English
Price: $159.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!