GOST 8696-74
ГОСТ 8696-74
|
|
General-purpose electrically welded spiral seam steel pipes. Specifications
Трубы стальные электросварные со спиральным швом общего назначения Технические условия
Status: Effective - Supersedes. The limitation of effectiveness has been lifted: Decree of the State Standard No. 1379 dated 08.21.91
The standard applies to steel electrofusion tubes with a spiral seam for general use. The standard does not apply to pipes for gas pipelines and oil pipelines.
Стандарт распространяется на стальные электросварные трубы со спиральным швом общего назначения. Стандарт не распространяется на трубы, для магистральных газопроводов и нефтепроводов.
Choose Language:
Format: Electronic (pdf/doc)
Approved: State Committee of Standards of the Council of Ministers of the USSR,
6/11/1974
SKU: RUSS18246
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
23 Hydraulic and pneumatic systems and components for general use. »
Welding regulations »
Welding work »
Welding regulations »
Main materials »
Welding regulations »
Pipelines »
Welding regulations »
Documentation »
Welding regulations »
Non-destructive control »
Welding regulations »
Mechanical Testing »
Welding regulations »
Defects »
Welding regulations »
Main materials »
Steel, cast iron »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.12 Testing and control of products of metallurgical industry »
4.12.4 Iron and steel products »
ISO classifier »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.10 Cast iron and steel pipes »
National standards »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.10 Cast iron and steel pipes »
National Standards for KGS (State Standards Classification) »
Latest edition »
V Metals and metal products »
V6 Pipes metal and pipe products »
V62 Steel pipes and their connecting parts »
National Standards for OKSTU »
STEEL PIPES »
Welded steel pipes with a diameter of up to 114 mm (including coiled) »
National Standards for OKSTU »
STEEL PIPES »
Welded steel pipes with a diameter of St. 114 mm and water and gas pipes »
As a Replacement Of:
GOST 8696-62: Electrically welded steel pipes with spiral seam
The Document References:
GOST 10006-80: Metal pipes
GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications
GOST 10692-80: Steel and cast iron pipes and fittings. Rules for acceptance of marking, packing, transportation and storage
GOST 11358-89: Dial-type thickness gauges and dial-type wall thickness gauges graduated in 0,01 and 0,1 mm. Specifications
GOST 14637-89: Thick sheet rolled stock of normal quality carbon steel
GOST 162-90: Depth gauges. Specifications
GOST 166-89: Vernier callipers. Specifications
GOST 18360-93: Plate snap-gauges for diameters from 3 to 260 mm. Dimensions
GOST 18363-73: Staple sheets for diameters from 100 to 180 mm. Design and dimensions
GOST 18364-73: Staple sheets for diameters from 180 to 260 mm. Design and dimensions
GOST 18365-73: Staples sheets with removable jaws for diameters in excess of 100 to 180 mm. Design and dimensions
GOST 18365-93: Plate snap-gauges with changeable lips for diameters over 100 to 360 mm. Dimensions
GOST 18366-73: Staples sheets with removable jaws for diameters in excess of 180 to 360 mm. Design and dimensions
GOST 19281-89: Rolled steel with increased strength. General specifications
GOST 19903-74: Hot-rolled steel sheets. Dimensions
GOST 2216-84: Adjustable smooth snap gauges
GOST 22536.0-87: Carbon steel and unalloyed cast iron. General requirements for methods of analysis
GOST 22536.1-88: Carbon steel and unalloyed cast iron. Methods for determination of general carbon and graphite
GOST 22536.2-87: Carbon steel and unalloyed cast iron. Methods for the determination of sulfur
GOST 22536.3-88: Carbon steel and unalloyed cast iron. Methods for determination of phosphorus
GOST 22536.4-88: Carbon steel and unalloyed cast iron. Methods for determination of silicon
GOST 22536.5-87: Carbon steel and unalloyed cast iron. Methods for determination of manganese
GOST 22536.6-88: Carbon steel and unalloyed cast iron. Methods for determination of arsenic
GOST 3845-75: Metallic tubes. Hydraulic pressure testing method
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 5378-88: Vernier protractors. Specifications
GOST 6507-90: Micrometers. Specifications
GOST 6996-66: Welded joints. Methods of mechanical properties determination
GOST 7268-82: Steel. Method for determination of ability to mechanical aging by impact bend testing
GOST 7502-89: Measuring metal tapes. Specifications
GOST 7502-98: Measuring metal tapes. Specifications
GOST 7564-73: Steel. General rules of samples, blanks and test pieces for mechanical and technological tests
GOST 7564-97: Rolled products general rules of samples, rough specimens and test pieces selection for mechanical and technological testing
GOST 7565-81: Iron, steel and alloys. Sampling for determination of chemical composition
GOST 8696-62: Electrically welded steel pipes with spiral seam
GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature
The Document is Referenced By:
GOST 31445-2012: Steel and cast iron tubes and pipes with protective coatings. Technical requirements
GOST 31448-2012: Steel pipes with defensive covering for main gas and oil pipelines. Specifications
GOST 32569-2013: Steel pipe technology. Requirements for design and operation of explosive and chemically dangerous production
GOST 34802-2021: Gas distribution systems. Coatings of extruded polyethylene for steel pipes. General technical requirements
GOST R 52568-2006: Steel pipes with defensive covering for main gas and oil pipelines. Specifications
GOST R 53384-2009: Steel and cast iron tubes and pipes with protective coatings. Technical requirements
GOST R 55474-2013: Gas distribution systems. Requirements for gas distribution networks. Part 2. Steel gas pipelines
GOST R 55474-2019: Gas distribution systems. Gas distribution networks of natural gas. Part 2. Steel gas pipelines
GOST R 57991-2017: Trunk pipeline transport of oil and oil products. Steel piles of pipes used for foundation construction of above-ground pipelines supports. General specifications
GOST R 58095.0-2018: Gas distribution systems. Requirements for gas consumption networks. Part 0. General
GOST R 58095.1-2018: Gas distribution systems. Requirements for gas consumption networks. Part 1. Steel gas pipelines
GOST R 70313-2022: Public roads. Bridge structures. Rules for the arrangement of staircases and operating facilities
Manual for SNiP 2.02.01-83: Guide to designing the foundations of buildings and structures
Manual for SNiP 2.02.01-83: Manual on the design of protection of mine workings from underground and surface waters and water reduction during the construction and operation of buildings and structures
Manual for SNiP 2.04.02-84: Design Guide for Surface Water Abstraction Facilities
Manual for SNiP 2.04.02-84: Design Guide for Groundwater Abstraction
Manual for SNiP 2.04.02-84: A guide for the design of water supply and sanitation in difficult engineering and geological conditions. T-3083
Manual for SNiP 2.04.02-84: Manual for the protection of the inner surface of steel pipes from corrosion (to SNiP 2.04.02-84)
Manual for SNiP 2.04.02-84: Drawing up the technical and economic part of the off-site water supply and sewage systems projects. Reference manual to SNiP
Manual for SNiP 2.04.02-84: A guide to designing automation and dispatching water systems
Manual for SNiP 2.04.02-84: Cooling Tower Design Guide
Manual for SNiP 2.04.02-84: Manual for the design of facilities for water treatment and treatment
Manual for SNiP 2.04.02-84: Design of facilities for sludge dewatering of natural water treatment plants
Manual for SNiP 2.04.02-84: Allowance for the volume and content of technical documentation for off-site water supply and sewage systems
Manual for SNiP 2.04.02-84: A guide to determining the wall thickness of steel pipes, the selection of grades, groups and categories of steels for external water supply and sewage networks
Manual for SNiP 3.05.04-85: Allowance for laying and installation of cast-iron, reinforced concrete and asbestos-cement water supply and sewage pipelines
Manual for SNiP II-37-76: Manual for the use of steel pipes for the construction of gas supply systems
MDS 40-2.2000: Design Manual for Self-Contained Utility Systems (Water Supply, Sewerage, Piped Heat Supply and Ventilation, Gas Supply, and Electricity Supply Systems) for Single-Dwelling and Multiple-Dwelling Residential Occupancies
NRP-93: Norms for strength calculation of transport packaging kits for transportation of nuclear fissile materials
ODM 218.2.090-2017: Guidelines for the use of tubular welded grooves in the construction of roads
ODM 218.3.083-2016: Guidelines for trenchless laying of road culvert pipes
OST 108.101.106-76: Water-steam heaters. Aft water chambers (with flat bottom, two-way). Design and dimensions.
OST 108.101.107-76: Water-steam heaters. Aft water chambers (with flat bottom, four-way). Design and dimensions.
OST 108.101.110-76: Water-steam heaters. Covers. Design and dimensions.
OST 108.101.111-76: Water-steam heaters. Covers. Design and dimensions.
OST 108.318.103-76: Water-steam heaters. Casings. Tubing. Design and dimensions.
OST 108.318.104-76: Water-steam heaters. Forward water chambers . Tubing. Design and dimensions.
OST 24.200.02-91: Assembling units of steel pipelines on nominal pressure<=10 MPa (100 kgf/cm2) of complete technological lines. General specifications.
OST 34-42-353-77: Rolled ferrous metals and pipes for the manufacture of boiler auxiliary equipment and pipelines. Limit Assortment
OST 36-145-88: Steel technological pipelines for pressure Ру up to 10 MPa. Fluxing automatic arc welding. Typical technological process.
OST 36-26-77: Welded details of pipelines Dy 500-1400 mm made of carbon steel for Pnom <= 2.5 MPa (≈ 25 kg/cm2). General technical requirements.
PB 03-108-96: Process pipeline design and safe operation rules
PB 11-401-01: Safety regulations for gas-handling facilities of metallurgic and coke-chemical industries and enterprises
R 51-31323949-58-2000: Guidelines for the Application of Steel Pipe in the Oil and Gas Industry
RD 34.39.201: Guidelines for Installation of Steam and Water Piping Systems in Thermal Power Stations
RD 38.13.004-86: Operation and repairs of process pipelines operating under pressure up to 10.0 MPa (100 kgf/cm2)
RD 39-132-94: Regulations for Operation, Inspection, Repair and Rejection of the Field Pipelines 1994
RTM 108.020.126-80: Method of calculation and design of oil coolers for oil supply systems of turbine units
RU 34-1203-71: Guidelines for the design of dust and air ducts of boiler units
SA 03-005-07: Industrial pipelines of oil-refining, petrochemical and chemical industry. Requirements to configuration and operation
Safety Guide: Recommendations on arrangement and safe operation of process pipelines
Safety Guide: Recommendations on technical diagnostics of welded vertical cylindrical tanks for oil and petroleum products
SNiP 2.04.12-86: Steel pipelines strength analysis
SNiP 2.05.13-83: Petroleum Product Pipelines Constructed within Cities and Other Populated Areas
SNiP 2.05.13-90: Oil-product pipelines laid on the territories of cities and other settlements
SNiP II-58-75: Thermal power stations
SNiP II-G.14-62: Technological steel pipelines with nominal pressure up to 100 kgf/cm2 inclusive. Design Standards
SP 287.1325800.2016: Marine berthing facilities. Rules of design and construction
SP 399.1325800.2018: External water supply and sewage systems made of polymer materials. Rules for design and installation
SP 42-102-2004: Design and construction of gas pipelines from metal pipes. To replace SP 42-102-96
SP 42-102-96: Code of practice for the use of steel pipes for the construction of gas supply systems
TU 14-3-1430-87: Pipes, Seamless and Welded, Second-Grade
TU 14-3-808-78: Spiral-welded electrowelded carbon steel pipes 20 for pipelines of nuclear power plants
VSN 10-83/Minhimprom: Instruction on designing of oxygen gas pipelines
VSN 3-94: Industry-Specific Building Code for the Installation of Underground Cold Water Supply Pipelines Made of Steel Pipe 300-600 mm in Diameter with Internal Cement-Sand Insulation
Customers Who Viewed This Item Also Viewed:
 |
Petroleum products. Method for measurement of viscosity by automatic capillar viscosimeter
Language: English |
Greases. Method for determination of ultimate strength and thermostrengthening
Language: English |
Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads
Language: English |
Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
Language: English |
Pipe fittings. Ball valves made of brass. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.