Small and medium volume steel cylinders for gases for pp ≤ 19.6 MPa (200 kgf/cm2) Specifications
Баллоны стальные малого и среднего объема для газов на Рр ≤ 19,6 МПа (200кгс/см2) Технические условия.
Status: Effective - Supersedes. The limitation of effectiveness has been lifted: Decree of the State Standard No. 1352 of 08/14/91
The standard applies to low volume carbon and alloy steel cylinders - up to 12 liters and medium volume - from 20 to 50 liters with working pressure up to 19.6 MPa (200 kgf
Стандарт распространяется на баллоны из углеродистой и легированной стали малого объема - до 12 л и среднего объема - от 20 до 50 л с рабочим давлением до 19,6 МПа (200 кгс/см кв.), изготовленные из бесшовных труб и предназначенные для хранения и перевозки сжатых, сжиженных и растворенных газов при температурах от минус 50 до плюс 60 °С.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstandart of the USSR,
12/19/1973
SKU: RUSS18251
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
23 Hydraulic and pneumatic systems and components for general use. »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
032/2013 TR CU. On safety of overpressure equipment »
Regulations and standards (to 032/2013 TR CU) »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.12 Testing and control of products of metallurgical industry »
4.12.6 Metal products »
ISO classifier »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.020 Storage tanks for liquids and gases »
23.020.30 Pressure vessels, gas cylinders »
National standards »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.020 Storage tanks for liquids and gases »
23.020.30 Pressure vessels, gas cylinders »
National Standards for KGS (State Standards Classification) »
Latest edition »
V Metals and metal products »
V6 Pipes metal and pipe products »
V66 Steel Cylinders »
The Document is Replaced With:
GOST 949-2023: Seamless steel cylinders for working pressure not more than 30.0 mpa (305.9 kgf/cm2) with a capacity not more than 100 liters for the transportation, storage and use of gases. Technical conditions
As a Replacement Of:
GOST 949-57: Cylinders steel for gases for Pd less than or equal to 200 kgf / cm2
The Document References:
GOST 10006-80: Metal pipes
GOST 14192-96: Cargo marking
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 16357-83: Nonlinear resistor-type arresters for standard ac voltage
GOST 18477-79: Universal containers
GOST 21140-88: Containers
GOST 22352-77: Manufacturer's guarantee. Establishment and calculation of the quarantined times in standards and specifications. General statements
GOST 24998-81: Gauges for tapes thread of valves and gas-bags. Tolerances
GOST 2991-85: Wooden uncollapsible cases for weights up to 500 kg. General specifications
GOST 6357-81: Basic norms of interchangeability pipe cylindrical thread
GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature
GOST 9909-81: Basic norms of interchangeability. Taper screw thread of valves and gas cylinder
The Document is Referenced By:
Decision 96: On the list of international and regional (interstate) standards, and in their absence - national (state) standards, the application of which on a voluntary basis to ensure compliance with the requirements of technical regulations of the Customs Union "On safety of equipment operating under excess pressure" (TR TS 032/2013), and the list of international and regional (interstate) standards, and in their absence - national (state) standards, containing rules and methods of research (tests) and
GOST 10157-2016: Gaseous and liquid argon. Specifications
GOST 10157-79: Gaseous and liquid argon. Specifications
GOST 10219-77: Xenon. Specification
GOST 12794-80: Methyl chloride technical. Specifications
GOST 14022-78: Anhydrous hydrogen fluoride. Specification
GOST 14022-88: Anhydrous hydrogen fluoride
GOST 15846-2002: Production for transportation to the areas of Far North and similar regions. Packing, marking, transportation and storage
GOST 18261-72: Active carbon. Method for determination of protective action time by ethyl chloride
GOST 18599-2001: Polyethylene pressure pipes. Specifications
GOST 19234-87: Technical monoethylamine. Specifications
GOST 20944-75: Liquids for aircrafts systems. Method for determination thermo oxidizing stability and corrosion activity
GOST 21058-75: Aviation hydraulic fluids and lubrication oils. Method for determination of foaming characteristics
GOST 21707-76: Iron ores, agglomerates and pellets. Method for determination of gas permeability and layer shrinkage during reduction
GOST 22408-77: Inflatable life rafts for sea-going ships inflation system. Technical specifications
GOST 23001-88: Propylene oxide technical. Specifications
GOST 23644-79: Gaseous nitrogen concentrated by stable isotope Nitrogen-15. Specifications
GOST 23797-79: Oil for aircraft gas turbine engines. Method for the determination of thermo oxidizing stability in oil volume
GOST 24614-81: Liquids and gases not reacting with the Karl Fischer reagent. Coulonometric method of water determination
GOST 25149-82: The liquid N7. Specifications
GOST 26450.0-85: Rocks. General requirements for sampling and sample preparation for determination of collecting properties
GOST 26460-85: Air separation products. Gases. Cryogens. Packing, marking, transportation and storage
GOST 26931-86: Raw materials and food-stuffs. Method for determination of copper
GOST 26932-86: Raw materials and food-stuffs. Methods for determination of lead
GOST 26933-86: Raw materials and food-stuffs. Methods for determination of cadmium
GOST 26934-86: Raw materials and food-stuffs. Method for determination of zinc
GOST 27206-87: Compounds and products containing stable isotopes
GOST 2918-79: Liquid sulphur dioxide technical. Specifications
GOST 29193-91: Gaseous halogenated hydrocarbons (liquefied gases). Taking of a sample
GOST 29333-92: Fluorinated hydrocarbons for industrial use. Determination of non-volatile residue
GOST 3022-80: Technical hydrogen. Specification
GOST 30349-96: Fruits, vegetables and derived products. Methods for determination of organochlorine pesticide residues
GOST 31371.7-2008: Natural gas. Determination of composition with defined uncertainty by gas chromatography method. Part 7. Measurement procedure of the mole fraction of components
GOST 31371.7-2020: Natural gas. Determination of the composition by gas chromatography with an uncertainty estimate. Part 7. Procedure for measuring the molar fraction of components
GOST 31383-2008: Protection against corrosion of concrete and reinforced concrete constructions. Test methods
GOST 31845-2012: Gas fuel locomotives. Explosion safety requirements
GOST 32968-2014: Refrigeration equipment. Cooling agents. Requirements for the use and recovery.
GOST 33012-2014: Propane and butane for sale. Determination of the hydrocarbon composition by gas chromatography
GOST 4039-48: Benzenes. Method for determining the duration of the induction period
GOST 6221-90: Industrial liquid ammonia
GOST 6718-93: Liquid chlorine. Specifications
GOST 6755-88: Type HP-I calcareous chemical absorbent
GOST 7568-88: Ethylene oxide. Specifications
GOST 8.616-2013: State system for ensuring the uniformity of measurements. Laboratory and stream chromatographs for control of component composition Liquefied hydrocarbon fuel gases. The method of verification
GOST 8050-85: Carbon dioxide,
GOST 8502-88: Difluorochloromethane (khladon 22). Specifications
GOST 8502-93: Difluorochloromethane (khladon 22). Specifications
GOST 9293-74: Gaseous and liquid nitrogen. Specifications
GOST 9909-81: Basic norms of interchangeability. Taper screw thread of valves and gas cylinder
GOST R 12.4.220-2012: Occupational safety standards system. Respiratory protective devices. Self-contained closed-circuit breathing apparatus for escape. Technical requirements. Test methods. Marking. Sampling rules
GOST R 12.4.253-2011: Occupational safety standards system. Respiratory protective devices. Self-contained compressed oxygen and chemical oxygen apparatus for mine rescuers. General specifications
GOST R 50234-92: Liquid chlorine. Specifications
GOST R 50301-92: Diphtorochloromethane (khladon 22). Specifications
GOST R 50838-2009: Polyethylene pipes for the supply of gaseous fuel. Specifications
GOST R 50838-95: Polyethylene pipes for the supply of gaseous fuel. Specifications
GOST R 51017-97: Fire engineering. Wheeled fire extinguishers. General technical requirements. Test methods
GOST R 51057-97: Fire engineering. Portable fire extinguishers. General technical requirements. Test methods
GOST R 51521-99: Refrigerants, propellants, production in aerosol packing and polymer materials. Test methods of ozone destroying substances
GOST R 51673-2000: Gaseous pure hydrogen. Specifications
GOST R 52779-2007: Polyethylene fittings for gas pipelines. General specifications
GOST R 53281-2009: Automatic gas fire extinguishing systems. Cylinders and cylinder banks. General technical requirements. Test methods
GOST R 53286-2009: Fire engineering. Automatic dry chemical fire fighting system. Module. General technical requirements. Test methods
GOST R 53291-2009: Portable and movable devices of fire extinguishing with high-velosity submission of fire quenching matter. General technical requirements. Test methods
GOST R 53367-2009: Combustible natural gas. Determination of sulphur-containing components using chromatographic method
GOST R 53401-2009: Gas fuel locomotives. Requirements of explosion safety
GOST R 54114-2010: Transportable gas storage devices and systems for storing hydrogen based on metal hydrides
GOST R 54484-2011: Liquefied hydrocarbon fuel gases. Method for determination of hydrocarbon composition
GOST R 54857-2011: Buildings and structures. Determination of air change of rooms method of indicator gas
GOST R 56835-2015: Liquefied natural gas. Boil-off gas of liquefied natural gas production. Determination of composition by gas chromatography method
GOST R 57975.2-2017: Аssociated oil gas. Determination of composition by gas chromatography. Part 2. Determination of sulfur compounds using flame photometric detector
GOST R 58198-2018: Mining. Points of switching in self-rescuers. Terms and definitions
GOST R 70545-2022: Coal coke. Method for determination of reactivity
GOST R 8.789-2012: State system for ensuring the uniformity of measurements. The bomb calorimeters. The method of the verification
GOST R 8.816-2013: State system for ensuring the uniformity of measurements. Natural gas. Volumetric heat (energy) of combustion. Method for measurement using the bomb calorimeter
GOST R 8.914-2016: The state system for ensuring the uniformity of measurements. Gas calorimeters. Verification procedure
Guideline 424: Guidelines for the construction of line structures for backbone and intra-zone cable communication lines (Sections 15-23. Appendices 1-11)
Guideline 424: Guidelines for the construction of line structures for backbone and intra-zone cable communication lines
I 1.09-10: Instructions for connecting insulated conductors of wires and cables
IBJaL.413534.001 RJe: Carbon monoxide alarm SOU-1. Manual
Letter 09-00-06/445: On carrying out technical diagnostics of cylinders
M-01V/2011: Method for measuring the mass concentration of metals in emissions of pollutants into the atmosphere and in the air in the working zone of industrial enterprises
Manual: Manual for impulse and low consumption fire extinguishing systems
MI 1997-89: Pressure Transducers Validation Procedures
MI 2096-2009: Recommendation. State system for ensuring uniformity of measurements. Combustion calorimeters with a bomb (liquid). Method of verification
MI 2353-95: State system for ensuring uniformity of measurements. Calorimeter gas automatic model 66. Calibration method
MI 2596-2000: State system for ensuring uniformity of measurements. Pressure transducers measuring "EJA" manufactured by "Yokogawa Sourr-Tion", Japan. Method of verification
MI 30-75: State system for ensuring uniformity of measurements. Methods of calibration of automatic industrial gas analyzers on the microconcentration of sulfur dioxide, hydrogen sulfide, chlorine and nitrogen oxides
MI 677-84: Guidelines. Pressure transducers measuring electrical SPD and complexes for measuring pressure digital SPDC. Method of verification
Minutes 15: Rules of transportation of dangerous goods by rail
MU 5279-90: Methodological guidelines for gas chromatographic measurement of N- (2, 4, 6-tribromophenyl) -maleinimide (TBFMI) concentrations in the working area
MUK 4.1.2104-06: Determination of the mass concentration of copper, magnesium, cadmium in urine samples by atomic absorption spectrometry
MUK 4.1.2105-06: Determination of the mass concentration of manganese, lead, magnesium in hair samples by atomic absorption spectrometry
MUK 4.1.2106-06: Determination of the mass concentration of manganese, lead, magnesium in blood samples by atomic absorption spectrometry
MUK 4.1.3037-12: Measurement of mass concentrations of copper, zinc in bile by atomic absorption spectrometry
MUK 4.1.3040-12: Measurement of the mass concentration of benz (a) pyrene in the blood by high performance liquid chromatography
MUK 4.1.3161-14: Measurement of mass concentrations of lead, cadmium, arsenic in the blood by inductively coupled plasma mass spectrometry
MUK 4.1.3230-14: Measurement of mass concentrations of chemical elements in biological media (blood, urine) using mass spectrometry with inductively coupled plasma
MUK 4.1.3480-17: Measurement of mass concentrations of chemical elements (cadmium, lead, arsenic, mercury) in milk and dairy products by inductively coupled plasma mass spectrometry
MUK 4.1.3481-17: Measurement of mass concentrations of chemical elements in atmospheric air by inductively coupled plasma mass spectrometry
MUK 4.1.3589-19: Measurement of the mass concentration of aluminum in biological media (blood, urine) by inductively coupled plasma mass spectrometry
MUK 4.1.774-99: Determination of iron, zinc, nickel in the urine by atomic absorption
MUK 4.1.775-99: Determination of iron, zinc, nickel content in bile by atomic absorption method
MUK 4.1.776-99: Determination of iron, zinc, nickel, copper and chromium in the hair by atomic absorption
MUK 4.1.777-99: Determination of zinc, nickel, copper and chromium in the blood by atomic absorption
MUK 4.1.778-99: Determination of zinc, nickel, copper and chromium in human milk by atomic absorption
MUK 4.1.779-99: Determination of manganese, lead in urine by atomic absorption
NPB 155-96: Fire engineering. Portable fire extinguishers. General reguirements and Test Methods
NPB 156-96: Fire engineering. Wheeled fire extinguishers. General reguirements and test methods
NPB 199-2001: Engineering fire. Extinguishers. Pressurizing sources. Communal specifications. Test methods
NPB 316-2003: Portable and movable devices of fire extinguishing with high-velocity submission of fire quenching matter. Requirements of fire safety. Test methods
NPB 54-2001: Automatic gas fire extinguishing systems. Cylinders and cylinder banks. General technical requirements. Test methods
NPB 54-96: Automatic Gaseous Agent Fire Extinguishing Systems. Modular Components and Cylinders. General Technical Requirements. Test Methods
NPB 67-98: Automatic dry chemical fire fighting systems. Module. General technical requirements and test methods
OMU 42-21-27-88: Hyperbaric oxygenation devices. Operation and repair rules
Order 577: Guidelines for the construction of long-distance cable communication lines
Order 577: On approval of the list of products of deep processing of grain
OST 2 N83-44-80: Occupational safety standards system. Arc and electroslag welding. Safety requirements
OST 2 N83-45-80: Occupational safety standards system. Contact welding. Safety requirements
OST 2 N83-46-80: Occupational safety standards system. Oxygen cutting. Safety requirements
OST 2 Н83-44-80: Occupational safety standards system. Electric arc welding and slag welding. Safety requirements.
OST 2 Н83-45-80: Labour safety standard system. Contact welding. Safety requirements.
OST 2 Н83-46-80: Labour safety standard system. Oxygen cutting. Safety requirements.
OST 26-04-2573-80: Gases. Chromatographic method for the determination of traces of saturated and unsaturated hydrocarbons.
OST 36-60-81: Welding at installation of steel building constructions. Main provisions.
OST 39-161-83: Oil. Laboratory methods for determining absolute permeability of oil and gas reservoirs and hosting rocks.
OST 39-195-86: Oil. Method of determining flood displacement efficiency factor in laboratory.
OST 39-235-89: Oil. Method for determination of relative permeability in vitro under stationary co-filtration.
OST 51.141-86: Combustible natural gases. Manometric method of preparation of calibration gas mixture
PND F 12.1.2-99: Guidelines for sampling in determining the concentration of suspended particles (dust) in industrial emissions
PNST 296-2018: Mining. Points of switching in self-rescuers. General technical requirements
POT R M-008-99: Intersectoral rules on labor protection during the operation of industrial vehicles (floor rail-free wheeled vehicles)
POT R O-200-01-95: Rules on labor protection in automobile transport
R 3113199-0340-95: Program for the training of engineering and technical workers on the organization of technical operation of gas-cylinder vehicles operating on liquefied hydrocarbon and compressed natural gas
RD 03112194-1095-03: Guidelines for the organization of operation of gas-cylinder vehicles operating on compressed natural gas
RD 03112194-1099-03: Guidance on organizing and rendering of services and jobs on conversion of vehicles to exploitation of compressed natural gas
RD 059/01-2019: Instructions for welding and surfacing during the repair of freight cars (with Amendment No. 1)
RD 2730.940.103-92: Steam and hot water boilers, steam and hot-water-pipelines. Welding. General requirements.
RD 34.10.102-91: Specified Quantity Allowances for Means of Mechanization, Special Accessories, and Tools for Overhaul of Main Energy Equipment of Thermal Power Stations
RD 34.10.103: Industry-Specific Specified Quantity Allowance for Tools, Equipment, Materials, and Aids for Repair and Rehabilitation of Gas Cleaning Equipment of Thermal Electric Powers
RD 34.11.305: Measurement procedure for measuring the total emission of sulfur dioxide with flue gases at thermal power plants using the gas analyzer GIAM-10
RD 34.15.132-96: Welding and Quality Control of Welded Joints in Metal Structures of Buildings During Construction of Industrial Facilities
RD 34.39.601: Guide to Repair of Fittings for Piping Systems at Pressure of 64-100 kgf/sq. cm
RD 39-0147014-535-87: Instructions for welding at installation and repair of pipelines and critical metal structures in organizations and enterprises of the Ministry of oil and gas industry.
RD 5.30.031-84: High pressure carbon dioxide fire extinguishing system. Design rules and regulations
RD 52.04.186-89: Part 1. Guidance on the control of air pollution. Pollution of the atmosphere in cities and other settlements. Main Geophysical Observatory. A.I.Voyeikova (MGO)
RD 52.10.243-92: Guideline on the chemical analysis of sea waters.
RD 52.10.556-95: Guidelines. Determination of pollutants in samples of marine bottom sediments and suspensions
SO 153-34.10.105: Standard Sets of Equipment, Accessories, Tools, and Aids for Renovation of Smokestacks and Cooling Towers and Corrosion Protection of Equipment at Electric Power Generating Stations Administered by Minenergo USSR
VSN 21-02-01/MO RF: Automatic gas fire extinguishing installations of the armed forces of the Russian Federation. Norms and design rules
|
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Building materials spread flame test method
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Clear sheet glass. Specifications
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
