GOST 25346-89

ГОСТ 25346-89

Basic norms of interchangeability. Unified system of tolerances and fits. General, series of tolerances and fundamental deviations

Единая система допусков и посадок Общие положения, ряды допусков и основных отклонений

Status: Restored in the Russian Federation for individual industries. By order of the Federal Agency for Technical Regulation and Metrology dated 01.03.2016 No. 101-st, it was restored on the territory of the Russian Federation only in relation to products delivered under the State Defense Order; IUS 6-2016

The standard applies to smooth parts, cylindrical and bounded by parallel planes, as well as the fit they formed and sets the terms, definitions and conventions, tolerances and basic deviations of the system of tolerances and fit for sizes up to 3150 mm and any linear dimensions, if they are set by other standards.

Стандарт распространяется на гладкие элементы деталей, цилиндрические и ограниченные параллельными плоскостями, а также на образованные ими посадки и устанавливает термины, определения и условные обозначения, допуски и основные отклонения системы допусков и посадок для размеров до 3150 мм и любых линейных размеров, если они установлены другими стандартами.

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 28

Approved: USSR State Committee for Standards, 4/11/1989

SKU: RUSS18257

Price: $300.15




The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 17 Metrology and measurements. Physical phenomena »

Construction (Max) » Standards » Other state standards used in construction » 21 Mechanical systems and general purpose devices »

Standards for pipe fittings (TPA) » 8. Piping valves (TPA) design » 8.1 General design issues piping valves (TPA) » 8.1.2 Interchangeability and other design requirements »

ISO classifier » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.040 Linear and angular measurements » 17.040.10 Tolerances and landings »

National standards » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.040 Linear and angular measurements » 17.040.10 Tolerances and landings »

ISO classifier » 21 MECHANICAL SYSTEMS AND GENERAL PURPOSE DEVICES » 21.020 Characterization and design of mechanisms, instruments and equipment »

National standards » 21 MECHANICAL SYSTEMS AND GENERAL PURPOSE DEVICES » 21.020 Characterization and design of mechanisms, instruments and equipment »

National Standards for KGS (State Standards Classification) » Latest edition » G Machines, equipment and tools » G1 General parts and units of machines » G12 Tolerances and fits »


The Document is Replaced With:

GOST 25346-2013: Basic norms of interchangeability. Geometrical product specifications. Code system for tolerances on linear sizes. General provisions, tolerances, deviations and fits

As a Replacement Of:

GOST 25346-82: Unified system of tolerances and seating fits. General provisions, series of tolerances and major deviations

The Document References:

GOST 25346-82: Unified system of tolerances and seating fits. General provisions, series of tolerances and major deviations

The Document is Referenced By:

GOST 11018-2011: Traction railway stock wheelsets of 1520 mm gauge railways. General specifications

GOST 11018-87: Wheel sets of diesel and electric locomotives for 1520 mm gauge railways. Specifications

GOST 1139-80: Basic norms of interchangeability. Straight-sided splined joints. Dimensions and tolerances

GOST 11708-82: Basic norms of interchangeability. Screw thread. Terms and definitions

GOST 12080-66: Cylindrical ends of the shafts

GOST 12081-72: 1:10 Conical shaft ends. Basis dimensions. Permissible torque

GOST 13535-87: Basic norms of interchangeability. Buttress thread, strengthened 45°

GOST 14782-86: Nondestructive testing. Welded joints. Ultrasonic methods

GOST 14901-93: Moulds for the manufacture of industrial rubber articles

GOST 17032-2010: Horizontal steel tanks for petroleum products. Specifications

GOST 18097-93: Screw-cutting lathes and lathes. Basic dimensions. Standards of accuracy

GOST 18103-84: Installations for manufacturing reinforced concrete three-dimensional elements of sanitary engineering cabins and lift shafts. Specifications

GOST 19930-91: Sewing domestic machines. General specifications

GOST 2.307-2011: Unified system for design documentation. Drawing of dimensions and limit deviations

GOST 2.307-68: Unified system for design documentation. Drawing of dimensions and limit deviations

GOST 21401-75: Plain limit gauges for dimensions up to 500 mm. Required dimensions

GOST 22605-77: Box and case locks and triggers for special equipment of automobile refuelling and transportation of fuel means. Types, construction and dimensions

GOST 22780-93: Car axles for 1520 (1524) mm gauge main-line railways. Types, parameters and dimensions

GOST 22782.6-81: Explosion proof electrical apparatus. Flameproof enclosure. Technical requirements and Test methods.

GOST 228-79: Anchor chains

GOST 24642-81: Basic norms of interchangeability. Tolerances of form and position. Basic terms and definitions

GOST 24643-81: Basic norms of interchangeability. Tolerances of form and position of surfaces. Numerical values

GOST 24788-81: Enameled steel kitchen utensils.

GOST 24848.1-81: Variator V-belts for industrial equipment. Basic sizes and methods of control

GOST 24848.2-81: Variable-speed drive v-belts for industrial equipment

GOST 25256-2013: Rolling bearings. Tolerances. Terms and definitions

GOST 25307-82: Basic norms of interchangeability. Cone joining system of limits and fits

GOST 25338-91: Woodworking equipment. Accuracy and rigidity test. General requirements

GOST 25347-82: Basic norms of interchangeability. Unified system of tolerances and fits. Tolerance zones and recommendable fits

GOST 25348-82: Basic norms of interchangeability. Unified system of tolerances and fits. Series of tolerances, basic deviations and tolerance zones for sizes over 3150 mm

GOST 25349-88: Basic norms of interchangeability. Unified system of tolerances and fits. Tolerance zones for the plastics parts

GOST 25670-83: Basic norms of interchangeability. Limit deviations of dimensions without tolerance indication

GOST 25878-85: Steel moulds for reinforced concrete members. Pallets. Construction and dimensions

GOST 26063-84: Industrial robots. Grippers. Types, nomenclature of basic parameters, connecting dimensions

GOST 26179-84: Basic norms of interchangeability. Tolerances for sizes above 10000 up to 40000 mm

GOST 26379-84: Wide V-belts for variable-speed drives of agricultural machines. Specifications

GOST 27002-86: Cooking utensils from corrosion-resistant steel

GOST 27204-87: Steel moulds for reinforced concrete members. Sides. Construction and dimensions

GOST 27284-87: Gauge. Terms and definitions

GOST 28187-89: Basic norms of interchangeability. Deviations of form and position. General requirements for methods of measurements

GOST 28496-90: System of quality evaluation and certification of interdelivered production. Mark of conformity.

GOST 29306-92: Hexagon drive ends for hand- and machine-operated screwdriver bits. Dimensions

GOST 30027-93: Drilling-milling-boring flexible manufacturing modules and machines centres. Standards of accuracy

GOST 30851.1-2002: Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB'S). Part 1. General rules

GOST 30872-2002: Air cooling machines. General specifications

GOST 30893.1-2002: Basic norms of interchangeability. General tolerances. Limit deviations for linear and angular dimensions without tolerance indications

GOST 30893.2-2002: Basic norms of interchangeability. General tolerances. Tolerances of form and position for features without individual tolerance indications

GOST 30987-2003: Basic norms of interchangeability. Dimensioning and tolerancing for non-rigid parts

GOST 31.0151.01-90: Universal and special-purpose setters

GOST 31.111.41-93: Parts and assembly units of universal assembly devices for metal-cutting machines. Basic parameters. Constructive elements. Norms of accuracy

GOST 31254-2004: Вasic norms of interchangeability. Geometrical features. General terms and definitions

GOST 31311-2005: Heating devices. General specifications

GOST 32208-2013: Springs of spring suspension of railway rolling stock. Method of fatigue life tests

GOST 32548-2013: Ventilation for buildings. Air terminal devices. General specifications

GOST 32583-2013: Stainless steel table and kitchen cutlery. General specifications

GOST 32663-2014: Polymer composite components of the pumps for special purpose. Specifications

GOST 33032-2014: Cardan shafts of agricultural machinery. General specifications

GOST 33169-2014: Hoisting cranes. Metal structures. Verification of bearing capacity

GOST 3326-86: Stop valves, check lift and swing valves. Overall dimensions

GOST 3480-76: Power take-off for agricultural tractors and power input connection for agricultural machines. Types and main parameters

GOST 3933-75: Still photo and movie camera lenses. Joined dimensions for accessories

GOST 4.226-83: Quality rating system. Building. Windows, doors and gates of wood. Nomeclature of characterictics

GOST 5813-2015: Fan v-belts and pulleys for engines of cars, tractors and combines. Requirements and test methods

GOST 5813-93: Fan v-belts and pulleys for engines of cars, tractors and combines

GOST 5883-89: Solid rubber tires

GOST 5976-90: Centrifugal fans for general use

GOST 6870-81: Rolling bearings. Needle rollers. Specifications

GOST 8536-79: Blanks for marine shafts and rudder stocks. Specifications

GOST 8-82: Metal-cutting machine tools

GOST 9581-80: Aluminium and copper-aluminium press-fastened thimbles. Construction and sizes

GOST ISO 11922-1-2006: Thermoplastics pipes for the conveyance of fluids. Dimensions and tolerances. Part 1. Metric series

GOST ISO 12307-1-96: Plain bearings. Wrapped bushes. Checking the outside diameter

GOST ISO 12307-2-99: Plain bearings. Wrapped bushes. Checking the inside diameter

GOST ISO 2795-2001: Plain bearings. Sintered bushes. Dimensions and tolerances

GOST ISO 4759-1-2015: Tolerances for fasteners. Part 1. Иolts, screws, studs and nuts. Product grades A, B and C

GOST R 50056-92: Basic norms of interchangeability. Depended tolerances of form, position and coordinating sizes. Bases of application

GOST R 50213-92: Textile machinery and accessories. Cones for yarn winding (cross wound). Half angle of the cone 5°57'. Dimensions and checking methods

GOST R 50577-93: Licence plates for vehicles. Types and main sizes. Technical requirements

GOST R 50798-95: Distinguishing sign of motor vehicles in international traffic. Types and sizes. Technical requirements

GOST R 51049-2008: Fire equipment. Pressure fire hoses. General technical requirements. Test methods

GOST R 51177-98: Overhead line hardware. General specifications

GOST R 51364-99: Air cooling apparatus. General specifications

GOST R 51585-2000: Leaf springs of motor vehicles. General specifications

GOST R 51687-2000: Stainless steel table and kitchen cutlery. General specifications

GOST R 52628-2006: Nuts. Mechanical properties and test methods

GOST R 53090-2008: Basic norms of interchangeability. Geometrical product specifications. Maximum material requirement, least material requirement and reciprocity requirement

GOST R 53279-2009: Fire equipment. Fire connecting heads. General technical requirements. Methods of testing

GOST R 53869-2010: Prostheses of lower-limb. Technical requirements

GOST R 54156-2010: Table utensils made from stainless steel for children and teenagers. Specifications

GOST R 54326-2011: Springs of spring suspension of the railway rolling stock. Method of fatigue life test

GOST R 55078-2012: Fiberglass reinforced thermosetting plastic pipes. Glass reinforced thermosetting plastics cylinder shells of chimney and flue-pipes. Specifications

GOST R 55599-2013: High pressure pipeline assembly units and components above 10 up to 100 MPa. General technical requirements

GOST R 55852-2013: Draft machine. General operating specification

GOST R 55944-2014: Bearings of the modified wood. Tolerances and landing

GOST R 56463-2015: Liquid-propellant rocket engines of small thrust. Production, tests and quality assurance general requirements under in-service delivery

GOST R ISO 4759-1-2009: Tolerances for fasteners. Part 1: bolts, screws, studs and nuts. Product grades A, B and C

GOST R ISO/TS 10303-1050-2009: Industrial automation systems and integration. Product data representation and exchange. Part 1050. Application module. Dimension tolerance

OST 108.030.133-84: Pipe elements of steam boiler heat surfaces under pressure less than 4 MPA, water boilers and heat-recovery boilers. Technical requirements, acceptance and control methods.

OST 24.201.03-90: Steel high-pressure vessels and devices. General technical requirements.

OST 36-146-88: Bearings for steel industrial pipelines for P 10 MPa. Specifications.

PR 32.131-98: Rules for Metrology. Typical training program for calibrators measuring instruments of geometric quantities in railway transport

R 50-54-101-88: Recommendations. Methods for calculating the main indicators of industrial robots

RD 153-34.0-04.185-2003: Machines and equipment for construction, technical re-equipment and repair of energy facilities. Requirements for design, materials, manufacturing, acceptance and testing

RD 22-207-88: Lifting machines. General requirements and production standards

RD 45.146-2000: Plastic console for cable manholes, sewers and premises of communication enterprises. General technical requirements

RST RSFSR 643-80: Black steel economic dishes . General specifications

SNiP 3.06.04-91: Bridges and pipes

SP 46.13330.2012: Bridges and pipes

ST TsKBA 083-2010: Pipe fittings. Multi-layer bellows of alloy VT1-0. General technical conditions

STA 25.03.009-2004: Means of alarm, fire and alarm-fire systems. General technical requirements and test methods

STB 1274-2001: Suspensions for road vehicles made of sheet metal. General specifications

POT R M-010-2000: Intersectoral labor protection rules in the production of asbestos and asbestos-containing materials and products

ST TsKBA 083-2016: Pipeline fittings. Multi-layered bellows made of alloy ВТ1-0. General technical specifications

TU 3680-001-04698606-04: Pipe Support

TU 3681-134-00220302-2007: Air coolers block-modular complete AVG-KB. Technical specifications

Customers Who Viewed This Item Also Viewed:

Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
Technical Regulations of the Eurasian Economic Union "On the Safety of Chemical Products"
Language: English
Price: $102.96
Rules of Electrical Installations Design (Russian Electrical Code). 7th Edition. All sections and exhibits
Language: English
Price: $478.76
Determination of categories of rooms, buildings and external installations for explosion and fire hazards
Language: English
Price: $148.50
Unified system for design documentation. Rules for making exploitative documents
Language: English
Price: $180.18
Standards of equipment of buildings, premises and facilities of automated systems, fire alarms, automatic fire extinguishing and fire warning.
Language: English
Price: $473.84
General requirements for machines, instruments and other industrial products as to environment mechanical stability
Language: English
Price: $175.23
Technical Regulations of Customs Union, On safety of machines and equipment
Language: English
Price: $110.40
Technical regulations of Customs Union. On the safety of agricultural and forestry tractors and trailers
Language: English
Price: $98.40
Rostehnadzor (RTN) Order N 116 of 25.03.2014 "On approval of the Federal rules and regulations in the field of industrial safety". Rules of industrial safety of hazardous production facilities that use equipment operating under excess pressure. Reg. № 323
Language: English
Price: $972.28
Non-destructive testing. Capillary methods. General requirements
Language: English
Price: $121.77
Steel and alloys. Methods for detection and determination of grain size
Language: English
Price: $170.28
Sulphur for industrial use. Sampling and preparation of samples
Language: English
Price: $44.55
Steel. Metallographic methods for the determination of non-metallic inclusions
Language: English
Price: $218.95
Jet fuels. Specifications
Language: English
Price: $86.13
Two lay rope type ЛК-РО construction 6x36(1+7+7/7+14)+7x7(1+6). Dimensions
Language: English
Price: $42.68
Two lay rope type ЛК-РО construction 6x36(1+7+7/7+14)+1 o.с. Dimensions
Language: English
Price: $62.08
Mixtures classification of hazard for health
Language: English
Price: $134.64
Aviation turbine fuel Jet A-1. Specifications
Language: English
Price: $144.53
Dry-type transformers. General specifications
Language: English
Price: $258.32

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message live-chat-up-arrow live-chat-down-arrow

Leave your message in the form below, and we will write back by e-mail!