GOST 13015-2003
ГОСТ 13015-2003
|
|
Concrete and reinforced concrete products for construction. General technical requirements. Rules for acceptance, marking, transportation and storage
Изделия железобетонные и бетонные для строительства. Общие технические требования. Правила приемки, маркировки, транспортирования и хранения
Status: Not effective - Superseded. Registration information 2072-st dated 12/27/2012 (official website of Rosstandart); IUS 5-2014
The standard applies to reinforced concrete and concrete products for building structures, manufactured from all types of concrete on inorganic binders and (or) aggregates. The standard establishes the main characteristics of products, general technical requirements for them, general rules for acceptance, labeling, transportation and storage, which should be taken into account when developing standards for specific types of products, as well as when developing technical specifications and (or) working drawings as part of working documentation for non-standardized products.
Стандарт распространяется на железобетонные и бетонные изделия для строительных конструкций, изготовляемые из всех видов бетонов на неорганических вяжущих и (или) заполнителях. Стандарт устанавливает основные характеристики изделий, общие технические требования к ним, общие правила приемки, маркировки, транспортирования и хранения, подлежащие учету при разработке стандартов на изделия конкретных видов, а также при разработке технических условий и (или) рабочих чертежей в составе рабочей документации на нестандартизованные изделия.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstroy of Russia,
6/30/2003
SKU: RUSS18267
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
5. Regulatory documents for building structures and products »
k.52 Reinforced concrete and concrete structures »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.080 Structures of buildings »
91.080.40 Concrete structures »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.080 Structures of buildings »
91.080.40 Concrete structures »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.100 Building Materials »
91.100.30 Concrete and concrete products »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.100 Building Materials »
91.100.30 Concrete and concrete products »
National Standards for KGS (State Standards Classification) »
Latest edition »
Zh Construction and building materials »
Zh3 Building structures and parts »
Zh33 Stone, brick, concrete and reinforced concrete structures and parts »
The Document is Replaced With:
GOST 13015-2012: Concrete and reinforced concrete products for construction. General technical requirements. Rules for acceptance, marking, transportation and storage
As a Replacement Of:
GOST 13015.0-83: Prefabricated concrete and reinforced concrete constructions and products. General technical requirements
GOST 13015.1-81: Prefabricated concrete and reinforced concrete constructions and products. Acceptance
GOST 13015.2-81: Prefabricated concrete and reinforced concrete constructions and products. Marking
GOST 13015.3-81: Prefabricated concrete and reinforced concrete constructions and products. Quality certificate
GOST 13015.4-84: Prefabricated concrete and reinforced concrete costructions and products. Rules for transportation and storage
The Document References:
GOST 1.0-92: State System for Standardization of Russian Federation. Basic principles
GOST 10060.0-95: Methods for the determination of frost-resistance. General requirements
GOST 10060.4-95: Concretes. Structure-mechanical rapid method for the determination of frost-resistance
GOST 10180-90: Concretes. Methods for strength determination using reference specimens
GOST 10922-90: Welded reinforcing products and inserts, welded joints of reinforcement and inserts for reinforced concrete structures. General specifications
GOST 12730.1-78: Concretes. Methods of determination of density
GOST 12730.2-78: Concretes. Method of determination of moisture content
GOST 12730.3-78: Concretes. Method of determination of water absorption
GOST 12730.4-78: Concretes. Methods of determination of porosity parameters
GOST 12730.5-84: Concretes. Methods for determination of water tightness
GOST 13015.0-83: Prefabricated concrete and reinforced concrete constructions and products. General technical requirements
GOST 13015.1-81: Prefabricated concrete and reinforced concrete constructions and products. Acceptance
GOST 13015.3-81: Prefabricated concrete and reinforced concrete constructions and products. Quality certificate
GOST 13015.4-84: Prefabricated concrete and reinforced concrete costructions and products. Rules for transportation and storage
GOST 13087-81: Concretes. Method of abrasion test
GOST 14192-96: Cargo marking
GOST 16504-81: The state system of testing products. Product test and quality inspection. General terms and definitions
GOST 17623-87: Concrete. Radioisotope method of average density determination
GOST 17624-87: Concrete. Ultrasonic method of strength determination
GOST 17625-83: Reinforced concrete structures and units. Radioactive method of determination of concrete protective covering thickness, reinforcement dimensions and arrangement
GOST 18105-86: Concretes. Rules for the strength control
GOST 18242-72: Statistical acceptance inspection by alternative feature inspection plans
GOST 18321-73: Statistical quality control. Item random sampling methods
GOST 20910-90: Refractory concretes. Specifications
GOST 21.501-93: System of design documents for construction. Rules for execution of architectural and construction working drawings
GOST 21779-82: System of ensuring of geometrical parameters accuracy in construction. Manufacturing and assembling tolerances
GOST 22362-77: Reinforced concrete structures. Methods for determination of reinforcement tensioning force
GOST 22690-88: Concretes. Determination of strength by mechanical methods of nondestructive testing
GOST 22904-93: Reinforced concrete structures. Magnetic method for determining the thickness of the protective layer of concrete and the location of reinforcement
GOST 23166-99: Windows. General specifications
GOST 23279-85: Welded reinforcing meshes for reinforced concrete structures and products. General specifications
GOST 23616-79: System of ensuring of geometrical accuracy of parameters in construction. Control of accuracy
GOST 23858-79: Welded joints butt and T-formed of reinforcement steel bars. Ultrasonic methods of quality inspection. Acceptability requirements
GOST 25214-82: Dense silicate concrete. Technical requirements
GOST 25246-82: Chemically resistant concretes. Specifications
GOST 25485-89: Cellular concretes. Specifications
GOST 25820-2000: Lightweight aggregates concretes. Specifications
GOST 25898-83: Building materials and products. Methods of steam-tightness determination
GOST 26433.1-89: System of ensuring geometrical parameters accuracy in construction. Rules of measurement. Prefabricated elements
GOST 26633-91: Heavy-weight and sand concretes. Specifications
GOST 27005-86: Light-weight and cellular concretes. Rules of average density control
GOST 27006-86: Concretes. Rules for mix proportioning
GOST 27296-87: Sound insulation of enclosing structures
GOST 28574-90: Corrosion protection in construction. Concrete and reinforced concrete constructions. Methods of the protection covers adhesion testing
GOST 28575-90: Corrosion protection in construction. Concrete and reinforced concrete constructions. Test of protection covers from steam penetration
GOST 30108-94: Building materials and elements. Determination of specific activity of natural radioactive nuclei
GOST 30247.1-94: Elements of building constructions. Fire-resistance test methods. Load bearing and separating constructions
GOST 30403-96: Building structures fire hazard test method
GOST 5781-82: Hot-rolled steel for reinforcement of ferroconcrete structures. Specifications
GOST 7.67-94: System of standards on information librarianship and publishing. Codes of names of countries
GOST 7076-99: Building materials and products. Method of determination of steady-state thermal conductivity and thermal resistance
GOST 7473-94: Ready-mixed concrete. Specifications
GOST 8829-94: Reinforced concrete and prefabricated concrete building products. Loading test methods. Assesment of strength, rigidity and crack resistance
SNiP 12-03-2001: Labor safety in construction industry
The Document is Referenced By:
GOST 10629-88: Prestressed reinforced concrete sleepers for 1520 mm gauge railways. Specifications
GOST 11024-2012: Concrete and reinforced concrete panels for external walls of residential and civil buildings. General specifications
GOST 11118-2009: Autoclaved aerated concrete panels for external walls of buildings. Specifications
GOST 13579-78: Concrete blocks for walls of basements. Specifications
GOST 17079-88: Reinforced concrete blocks for ventilation. Specifications
GOST 18105-2010: Concretes. Rules of control and norm of an assessment of quality.
GOST 18105-86: Concretes. Rules for the strength control
GOST 18979-90: Reinforced concrete columns for multi-storey buildings. Specifications
GOST 19330-2013: Masts (poles) for overhead contact line supports of railways. Specifications
GOST 19804-2012: Reinforced prefabricated concrete piles. Specifications
GOST 20213-89: Reinforced concrete roof trusses. Specifications
GOST 21.501-2011: System of design documents for construction. Rules for execution of the working documentation of architectural and construction solutions
GOST 24476-80: Precast reinforced concrete foundations for columns of the framework of different kinds of application for skeletal multi-storey buildings. Specifications
GOST 24594-81: Wall panels and blocks of brick and ceramic stones. General specifications
GOST 24694-81: Reinforced concrete T-joint of flumed irrigation systems. Specifications
GOST 25820-2000: Lightweight aggregates concretes. Specifications
GOST 26815-86: Constructions of support walls reinforced concrete. Specification
GOST 26919-86: Reinforced concrete window boards for residential, civil and auxiliary buildings. Specification
GOST 27108-86: Reinforced concrete framework structures for multi-storeyed industrial buildings with floors without beams. Specifications
GOST 27215-87: Reinforced concrete ribbed floor slabs of 400 mm depth for industrial buildings. Specifications
GOST 31310-2005: Wall three-layer reinforced concrete panels with energy-efficient insulation. General specifications
GOST 31356-2007: Dry building cement binder mixes. Test methods
GOST 31357-2007: Dry bulding cement binder mixes. General specifications
GOST 31358-2007: Dry building flooring cement binder mixes. Specifications
GOST 31359-2007: Cellular autoclave curing concretes. Specifications
GOST 31360-2007: Wall unreinforced products of cellular autoclave curing concrete. Specifications
GOST 32209-2013: Reinforced for overhead contact line supports оf railways. Specifications
GOST 32871-2014: Automobile roads of general use. Pipes for road culvert. Technical requirements
GOST 33148-2014: Automobile roads of general use. Reinforced concrete slabs. Technical requirements
GOST 6482-2011: Ferroconcrete nonpressure pipes. Technical specifications.
GOST 8020-90: Concrete and reinforced concrete structures for sewage, water and gas supply pipeline manholes. Technical specifications.
GOST 8717.0-84: Reinforced concrete and concrete steps. Specifications
GOST R 42.4.01-2014: Civil defence. Civil defence constructions. Test methods
GOST R 51110-97: Equipment for bank protection. General technical requirements
GOST R 51263-2012: Concrete with polystyrene aggregates. Specifications
GOST R 52751-2007: Steel-fibro-concrete slabs for bridge spans. Specifications
GOST R 53231-2008: Concretes. Rules for control and assessment of strength
GOST R 54270-2010: Masts (Poles) for overhead contact line supports of railways. Specifications
GOST R 54271-2010: Anchors for overhead and contact line supports of rail ways. Specifications
GOST R 54272-2010: Reinforced concrete foundations for overhead contact line supports of railways. Specifications
GOST R 54747-2011: Ferro-concrete cross ties for railways for 1520 mm gauge railways. General specifications
GOST R 54928-2012: Pedestrian bridges for polymer composites. Specifications
Manual: Manual for impulse and low consumption fire extinguishing systems
MDS 11-20.2009: Methodics of precision noncontact executive survey of hinged facade systems with air gaps in the construction of tall buildings
MDS 12-23.2006: Temporary recommendations on the technology and organization of construction of multifunctional high-rise buildings and building complexes in Moscow
MDS 12-61.2012: The project for the production of works on the device of a rail track of a tower crane with a concrete beam BRP-62.8.3
NB ZhT TsE 067-2003: Supporting structures of the contact network elements. Safety standards
ODM 218.2.014-2011: Guidelines for the use of steel-fiber-concrete in the repair of bridge structures
ONTP 09-85: All-Union norms of technological design of enterprises for the production of products from cellular and dense autoclaved concrete
OSN-APK 2.10.03.001-04: Designing the integrated protection of reinforced concrete structures of industrial agricultural buildings and structures from the effects of corrosive environments
OST 66-14-86: Ferroconcrete complex plates. Specification.
R 589-86: Recommendations for ballasting of pipelines at underwater crossings
RD 11-08-2008: Standard inspection program during state construction supervision of nuclear facilities
RD 50:48:0075.03.05: Recommendations for the design and safe operation of elevated crane tracks
RD EO 1.1.2.05.0697-2006: Guide to the construction and commissioning of reinforced concrete tower cooling towers of nuclear power plants
RMD 31-04-2008 Sankt-Peterburg: Recommendations for construction of residential and public high-rise buildings
RMD 32-18-2012 Sankt-Peterburg: Recommendations for the use of paving in the paving of residential and public business areas
RMD 32-18-2016 St. Petersburg: Recommendations for the use of paving in the construction of pavements for residential and public and business buildings
RMD 52-01-2006 Sankt-Peterburg: Design and construction of enclosing structures of residential and public buildings using cellular concrete in St. Petersburg. Part I
RMD 52-12-2012 Sankt-Peterburg: Typical temporary concrete fences during work on the city’s road network
RTM 5-05-2009: Guiding technical materials for the design, manufacture and use of steel fiber concrete structures on the fiber of thin steel wire
SN 313-65: Instructions for manufacturing technology and installation of steel embedded parts in precast concrete and concrete products
SN 525-80: Process Guidelines for Making Polymer Concretes and Polymer Concrete Products
SN 529-80: Process Guidelines for Production of Structures and Products of Dense Silicate Concrete
SN 549-82: Guidelines for the Design, Fabrication, and Application of Structures and Products Made of Organic Fiber Reinforced Concrete (Arbolite)
SP 27.13330.2011: Concrete and Reinforced Concrete Structures intended for the Service in Elevated and High Temperatures
SP 295.1325800.2017: Concrete structures reinforced with fibre-reinforced polymer bars. Design rules
SP 31.13330.2012: Water supply. Pipelines and portable water treatment plants
SP 52-104-2006: Steel fibre reineorced concrete structures
SP 52-110-2009: Concrete and reinforced concrete structures subjected to technological high and high temperatures
SP 52-117-2008*: Reinforced concrete spatial structures of coatings and floors. Part I. Calculation methods and design
SP 63.13330.2012: Concrete and reinforced concrete structures. General provisions.
SP 70.13330.2012: Bearing and enclosing structures. Updated living edition of SNiP 3.03.01-87
SP 78.13330.2012: Automobile roads
ST RK 1855-2008: Bridgeworks and culverts on motor roads. Concrete drive piles for bridge piers. General specification
ST RK 1858-2008: Bridgeworks and culverts on motor roads. Requirements at designing of concrete and reinforced concrete structures
TR 166-04: Technical recommendations for quality assurance of concrete and mortar mixes and prevention of concrete corrosion in reinforced concrete structures
TR 186-07: Technological regulations for the installation of waterproofing keys Aquastop when constructing and restoring waterproofing of deformation and technological joints of concrete in reinforced concrete structures of underground and submerged structures
TR 206-09: Technical recommendations on the design and production of works on the installation of walling pits in the cramped conditions of the existing urban development in Moscow
TR 210-09: Technical recommendations (manual) on the construction technology of underground collector tunnels of rectangular section with the use of tunnel boring complexes with all-section lining
TU 102-271-80: Constructions of fine-grained (sandy) concrete for series 123 residential buildings
TU 102-461-88: Garage reinforced concrete prefabricated box single and double row collective use
TU 102-465-88: Rack reinforced concrete vibrated CB 90-3.2 for supports VL 6 - 10 kV
TU 102-541-89: Garage assembly individual use of ash and slag concrete
TU 102-79: Concrete belt weighting compounds type UE for main pipelines
TU 102-84.3-87: Garage reinforced concrete prefabricated box with two floors for collective use
TU 5831-001-54735376-2004: Specifications. Three-layer reinforced concrete panels with flexible fiberglass connections for exterior walls of Styrod system buildings
TU 5853-001-04000633-2006: Adjustable tip manholes. Technical conditions
TU 67-1003-88: Lattice arched beams prestressed with a span of 12 m
VSN 189-78: Guidelines for Planning and Execution of Artificial Soil Freezing Used in Subway and Tunnel Construction
VSN 212-91: Use of Natural-Porous-Aggregate Concrete in Transportation Tunnel Construction
VSN 81-80: Instructions for the manufacture, construction and filling of precast concrete and reinforced concrete culverts
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.