SNiP 2.05.13-90
СНиП 2.05.13-90
|
|
Oil-product pipelines laid on the territories of cities and other settlements
Нефтепродуктопроводы, прокладываемые на территории городов и других населенных пунктов
Status: The document is not up to date. The updated version of SP 125.13330.2012 is valid. Oil product pipelines laid in the territory of cities and other settlements
Standards apply to the design of new, reconstruction and technical re-equipment of existing pipelines with a diameter of up to 200 mm incl. with a working pressure of not more than 2.5 MPa, laid on the territory of cities and other settlements and intended for the transportation of petroleum products (gasoline, diesel fuel, kerosene, heating oil, jet fuel, fuel oil) from the supplier’s enterprises to the consumer’s enterprises located in these cities or other locations. The standards also apply to reconstructed and technically re-equipped existing pipelines with a diameter of up to 500 mm inclusive and with a pressure of 2.5 MPa located outside the residential territory of cities and other settlements
Нормы распространяются на проектирование новых, реконструкцию и техническое перевооружение действующих нефтепродуктопроводов диаметром до 200 мм включ. с рабочим давлением не более 2,5 МПа, прокладываемых на территории городов и других населенных пунктов и предназначаемых для транспортирования нефтепродуктов (бензина, дизельного топлива, керосина, печного топлива, топлива для реактивных двигателей, мазута) от предприятий поставщика до предприятий потребителя, расположенных в этих городах или других населенных пунктах. Нормы также распространяются на реконструируемые и технически перевооружаемые существующие нефтепродуктопроводы диаметром до 500 мм включительно и давлением 2,5 МПа расположенные за пределами селитебной территории городов и других населенных пунктов
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstroy of the USSR (State Committee of the Council of Ministers of the USSR for Construction),
10/9/1990
SKU: RUSS18282
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
3. Normative documents on urban planning, buildings and constructions »
K.34 Main and field pipelines »
Welding regulations »
Welding work »
Welding regulations »
Main materials »
Welding regulations »
Pipelines »
Welding regulations »
Metal structures »
Welding regulations »
Welding materials »
Welding regulations »
Documentation »
Welding regulations »
Non-destructive control »
Welding regulations »
Defects »
Welding regulations »
Welding work »
Dusting »
Welding regulations »
Main materials »
Steel, cast iron »
Welding regulations »
Welding materials »
Electrodes »
Technical Supervision »
Section I. Technological, construction, energy supervision and environmental protection regarding limitation of negative anthropogenic impact »
IV. Regulatory legal acts and regulations »
4. Security of capital construction objects »
4.1. Federal State Construction Supervision »
ISO classifier »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.200 Equipment for oil refining, oil products and natural gas »
2003.200.13 Pipelines and their components »
As a Replacement Of:
SNiP 2.05.13-83: Petroleum Product Pipelines Constructed within Cities and Other Populated Areas
The Document References:
GOST 10704-91: Electrically welded steel line-weld lubes. Range
GOST 10705-80: Electrically welded steel tubes. Specifications
GOST 25812-83: Steel pipe mains. General requirements for corrosion protection
GOST 8696-74: General-purpose electrically welded spiral seam steel pipes. Specifications
SN 527-80: Instructions on Designing of Steel Process Piping, Рnom up to 10 MPa
SNiP 2.05.13-83: Petroleum Product Pipelines Constructed within Cities and Other Populated Areas
SNiP II-106-79: Planning Standards. Storage facilities for petroleum and petroleum products
VNTP 3-90: Engineering Design Standards for Branched Petroleum Product Pipelines
The Document is Referenced By:
Letter 48836-DV/08: On current codes of practice that prohibit the use of used pipes
MDS 11-16.2002: Guidelines for drafting an engineering plan for civil defense
MDS 11-4.99: Methodical recommendations for the examining of feasibility studies (of the projects) for construction of production enterprises, buildings and structures
MGSN 1.01-98: Part 2: Interim Urban Development Code of the City of Moscow
Order 1112: On Amending Order No. 687 of the Federal Agency for Technical Regulation and Metrology of April 2, 2020
Order 1653: On amending the order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687
Order 172/pr: On approval of Amendment N 2 to SP 125.13330.2012 "SNiP 2.05.13-90 Oil product pipelines laid in the territory of cities and other settlements
RD 153-39.4-001-96: Rules of Delivery of Oil Products To Oil Storage Tanks, Petrol Stations and Warehouses of Combustibles and Lubricants Through the Branches of the Main Oil Product Pipelines
RD 153-39.4-041-99: Operating rules and regulations for trunk oil product pipelines.
RD 153-39.4-044-99: Rules of total overhaul of main oil product pipelines laid in the cities, settlements and entering the territory of tank farms and pumping stations
RD 153-39.4-056-00: Main crude pipeline. Operations rules.
RD 153-39.4R-006-96: Ordinance on the Composition and Procedure for Gathering Initial Data for the Design of Facilities for the Supply of Petroleum Products
RD 153-39-011-97: Instruction on accounting of oil products on trunk oil-products pipelines.
Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope
Resolution 107: Provisional Regulations on the composition of measures to prevent emergencies in the special section "Engineering and technical measures of civil defense. Measures to prevent emergencies" of urban planning documentation of Moscow
Resolution 82: Temporary norms and rules for the planning and development of the city of Moscow. Consolidated edition (not valid)
SanPiN 2.2.1/2.1.1.984-00: The design, construction, modernization and operation of enterprises, planning and development of residential areas. The Sanitary Protection Zones and
SO 01-05-AKTNP-002-2004: On automation and telemechanization of installations of pipeline transportation system of oil products of JSC "AK" Transnefteprodukt "
SP 11-107-98: Procedure of Development and Composition of the “Engineering and Technical Measures of Civil Defense. Measures for Prevention of Emergencies” Section of Construction Projects
SP 11-112-2001: The procedure for development and composition of the section "Engineering civil defence measures. Measures for the prevention of emergencies" for urban planning documentation for the areas of urban and rural settlements and other municipality subjects
SP 11-113-2002: The reporting on the engineering civil defence measures and activities to prevent emergencies in the preparation of an application of intent to invest in the construction and justification of investment in the construction of enterprises, buildings and structures
SP 125.13330.2012: Petroleum product pipelines laid through cities and public areas
SP 30-102-99: Planning and construction of low-rise housing construction territories
SP 42.13330.2011: Urban development. Urban and rural planning and development
SP 53.13330.2011: Planning and development of territories of horticultural (suburban) associations of citizens, buildings and structures
STA 25.03.02-2004: Combined security system
STN Ts 01-95: 1520-mm Gauge Railways
TSN 30-303-2000 MO: Planning and development of urban and rural settlements. Moscow region
TSN 30-304-2000: City of Moscow Planning and Development Code
TSN 30-311-2004: Urban planning. Planning and development of urban and rural settlements of the Yamalo-Nenets Autonomous Okrug
VNTP 3-90: Engineering Design Standards for Branched Petroleum Product Pipelines
VNTP 5-95: Norms of technological design of enterprises for provisioning with petroleum products (petroleum storage depots)
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.