PR 50.2.009-94
ПР 50.2.009-94
|
|
The testing and approval procedure for the measurement instrumentation
Порядок проведения испытаний и утверждения типа средств измерений (ПР 50.2.009)
Status: Not effective - Superseded
The document establishes general requirements for the organization and procedure for carrying out work on the testing and approval of the type of measuring instruments.
Документ устанавливает общие требования к организации и порядку проведения работ по испытаниям и утверждению типа средств измерений.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstandart of Russia,
2/8/1994
SKU: RUSS18283
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Regulatory documents of supervisory authorities »
Normative documents of Committee of Russian Federation for Standardization, Metrology and Certification »
PromExpert »
SECTION II. METROLOGICAL »
I Organizational and technical bases of metrological support »
1 Organization and management of metrological support »
1.1 Basic provisions of metrological support »
ISO classifier »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.020 Metrology and measurements in general »
National standards »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.020 Metrology and measurements in general »
National Standards for KGS (State Standards Classification) »
Latest edition »
T General technical and organizational and methodological standards »
T8 State measurement system »
T80 Rules, norms, regulations infield of ensuring uniformity of measurements »
National Standards for OKSTU »
SYSTEMS OF GENERAL TECHNICAL AND ORGANIZATIONAL-METHODOLOGICAL STANDARDS »
State system for ensuring the uniformity of measurements (GSI) »
The Document is Replaced With:
PR 50.2.104-09: State system for ensuring uniformity of measurements. Procedure for testing standard samples or measuring instruments for type approval
PR 50.2.105-09: Procedure for approving the type of reference standards or reference measuring instruments
PR 50.2.106-09: State system for ensuring uniformity of measurements. The procedure for issuing certificates of approval of the type of reference materials or the type of measuring instruments, the establishment and change of the validity of these certificates and the interval between inspections of measuring instruments
PR 50.2.107-09: State system for ensuring uniformity of measurements. Requirements for approval marks of the type of reference materials or the type of measuring instruments and the procedure for their application
The Document References:
GOST 8.401-80: State system for ensuring the uniformity of measurements. Accuracy classes of measuring instruments. General requirements
The Document is Referenced By:
FR 1.29.2009.06689: Recommendation. State system for ensuring uniformity of measurements. Mass and volume of petroleum products. Measurement procedure in vertical tanks
GOST 10028-81: Glass capillary viscosimeters. Specifications
GOST 10180-90: Concretes. Methods for strength determination using reference specimens
GOST 10181-2014: Concrete mixtures. Methods of testing
GOST 10223-97: Weighing batchers of periodic operation
GOST 10574-91: Meat products. Determination of starch content
GOST 10702-78: Steel bars, carbon and alloy, structural, for cold extruding and upsetting. Specifications
GOST 10922-90: Welded reinforcing products and inserts, welded joints of reinforcement and inserts for reinforced concrete structures. General specifications
GOST 11268-76: Structural thin sheets of special purpose alloyed high quality steel
GOST 11269-76: Universal rolled plates and wide strips made of special purpose structural high-grade Alloy steel
GOST 112-78: Meteorological glass thermometers
GOST 11358-89: Dial-type thickness gauges and dial-type wall thickness gauges graduated in 0,01 and 0,1 mm. Specifications
GOST 11828-86: Rotating electrical machines. General test methods
GOST 12738-77: Glass bulbs with graduated neck. Technical specification
GOST 13033-84: Gsp. Electrical analog equipment and means for automation
GOST 14080-78: Precision alloy strip with specified temperature coefficient of linear expansion. Specifications
GOST 1435-99: Bars, strips and reels of tool unalloyed steel. General specifications
GOST 14657.0-96: Bauxite. General requirements for methods of chemical analysis
GOST 14782-86: Nondestructive testing. Welded joints. Ultrasonic methods
GOST 15.311-90: System of product development and launching into manufacture. Launching of products under foreign companies technical documents
GOST 1577-93: Plate and broadband roll stock of construction fine steel.
GOST 1578-76: Speedometers with flexible shaft drive for cars and cycles. General technical specifications
GOST 164-90: Vernier height gauges. Specifications
GOST 166-89: Vernier callipers. Specifications
GOST 16765-87: General-purpose self-propelled boom cranes. Acceptance and testing methods
GOST 17152-89: Steel hot-rolled shapes for cutting blades of earth-moving machines. General specifications
GOST 17624-87: Concrete. Ultrasonic method of strength determination
GOST 18481-81: Glass hydrometers and cylinders. General specifications
GOST 18954-73: Gas sampling and storage glass apparatus and tubes (pipettes). Specifications
GOST 19277-73: Seamless steel tubes for oil and fuel lines. Specifications
GOST 19347-99: Copper sulfate. Technical conditions
GOST 20068.1-79: Tintess bronze. Method of spectral analysis of metal standard specimens with spectrum photographic record
GOST 20790-93: Medical instruments, apparatus and equipment. General specifications
GOST 21520-89: Small-sized wall blocks of cellular concrete. Specifications
GOST 22.2.04-97: Safety in emergencies. Technogenic crashes and catastrophes. Metrological assurance of control of the complicated technical systems state. General statements and rules
GOST 22261-94: Measuring instruments for electrical
GOST 22520-85: Pressure, pressure difference and vacuum transmitters with electrical analog output signals gsp
GOST 22904-93: Reinforced concrete structures. Magnetic method for determining the thickness of the protective layer of concrete and the location of reinforcement
GOST 23189-78: Primary aluminium. Spectrochemical method for the determination of arsenic and lead
GOST 24018.0-90: Nickel-based high-temperature strong alloys
GOST 2405-88: Pressure gauges, vacuum gauges, pressure-vacuum gauges, pressure meters, draft gauges and draft-pressure gauges
GOST 24104-2001: Laboratory scales. General technical requirements
GOST 24452-80: Concretes. Methods of prismatic compressive strengths, modulus of elasticity and Poisson ratio determination
GOST 2475-88: Wires and rolls
GOST 25051.2-82: The state system of testing products. Test chambers of heat and cold. Certification methods
GOST 25086-87: Nonferrous metals and their alloys. General requirements for methods of analysis
GOST 25485-89: Cellular concretes. Specifications
GOST 26449.0-85: Stationary distillation desalting units. General requirements for chemical analysis methods at saline water desalination
GOST 27809-95: Cast iron and steel. Methods of spectrographic analysis
GOST 27816-88: Asphalt paver. Test methods
GOST 28066-89: Ssi liquid chamber meters
GOST 28089-89: Wall masonry constructions. Test method for bond strength of facing tiles with the base
GOST 28393-89: PM bars and strips of high-speed steel. General specifications
GOST 28498-90: Liquid-in-glass thermometers
GOST 28840-90: Machines for tension, compression and bending tests of materials
GOST 28845-90: Machines for long time strength creep, testing and relaxation of materials. General technical requirements
GOST 28871-90: Line transmission path equipment of digital optical-fibre transmission systems. Methods of measuring basic parameters
GOST 29037-91: Electromagnetic compatibiliтy of technical means. Certification tests. Ceneral rules
GOST 29075-91: Nuclear instrumentation systems for nuclear power stations. General requirements
GOST 29226-91: Viscometers for liquids
GOST 30108-94: Building materials and elements. Determination of specific activity of natural radioactive nuclei
GOST 30124-94: Weight meters and weighing batchers of continuous action
GOST 302-79: Medical maximum glass thermometer. Specifications
GOST 30373-95: Electromagnet compatibility of technical means. Test equipment. Shielded chambers. Classes, basic parameters, technical requirements and test methods
GOST 30380-95: Electromagnetic compatibility for consumer video tape recorders. Immunity to electromagnetic disturbance. Test methods
GOST 30381-95: Electromagnetic compatibility of technical means. Specification of electromagnetic waves absorber for shielded chambers
GOST 30421-96: Electrical capacitance, pure resistance and dissipation factor high-voltage meters. General specifications
GOST 30605-98: Digital voltage and current measuring converters. General specifications
GOST 310.5-88: Cements. Test method for heat of hydration
GOST 31537-2012: Wheelset assembly for locomotives and motor-powered units using shrink fit method. Typical technological process
GOST 31548-2012: Self-propelled road rollers. General specifications
GOST 31550-2012: Pile driving hammers. Specifications
GOST 31552-2012: Plate compactor. General specifications
GOST 31554-2012: Front end loaders with telescopic boom. General specifications
GOST 4103-82: Ready-made sewing goods. Methods of quality control
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 4543-71: Structural alloyed steel
GOST 535-88: Common quality carbon bar and shaped sections. General specifications
GOST 5378-88: Vernier protractors. Specifications
GOST 5382-91: Cements and materials for cement production. Chemical analysis methods
GOST 5496-78: Rubber technical tubes. Specifications
GOST 577-68: Clock-type dial indicators graduated in unit divisions of 0,01 mm. Specifications
GOST 6507-90: Micrometers. Specifications
GOST 6651-2009: State system for ensuring the uniformity of measurements. Platinum, copper, and nickel resistance resistive temperature transducers. General requirements and test methods
GOST 6859-72: Apparatus for liquids sampling and measuring. Specifications
GOST 7328-2001: Weights. General specifications
GOST 7470-92: Micrometric depth meters. Specifications
GOST 7502-98: Measuring metal tapes. Specifications
GOST 7661-67: Dial depth gauges. Specifications
GOST 8.009-84: State system for ensuring the uniformity of measurements. Standardized metrological characteristics of measuring instruments
GOST 8.247-2004: State system for ensuring the uniformity of measurements. Sounding sticks for oil product level measuring in horizontal tanks. Calibration methods
GOST 8.315-97: Standard samples for composition and properties of substances and materials
GOST 8269.0-97: Mauntainous rock road-metal and gravel, industrial waste products for construction works. Methods of physical and mechanical tests
GOST 8478-81: Welded meshes for reinforced concrete structures. Specifications
GOST 868-82: Internal dial gauges graduated in 0,01 mm. Specifications
GOST 8735-88: Sand for construction work. Testing methods
GOST 9.030-74: Unified system of corrosion and ageing protection. Vulcanized rubbers. Method of testing resistance to attack by corrosive media in limp state
GOST 9018-89: Fuel dispensing pumps. General specifications
GOST 9031-75: Reference hardness standards
GOST 9245-79: Measuring direct current potentiometers
GOST 9921-81: Tire hand-operated pressure gauges
GOST R 15.013-94: System of product development and launching into manufacture. Medical products
GOST R 22.2.04-94: Safety in emergencies. Technogenic crashes and catastrophes. Metrological assurance of control of the complicated technical systems state. General statements and rules
GOST R 50444-92: Medical instruments, apparatus and equipment. General specifications
GOST R 50648-94: Electromagnetic compatibility of technical equipment. Immunity to power frequency magnetic field. Technical requirements and test methods
GOST R 50652-94: Electromagnetic compatibility of technical equipment. Immunity to damped oscillatory magnetic field. Technical requirements and test methods
GOST R 50759-95: Gas analyses for control of industrial and transport emissions. General specifications
GOST R 50760-95: Gas and aerosol analysers for air pollution monitoring. General specifications
GOST R 50818-95: Gas motors volumetric. General technical requirements and test methods
GOST R 51254-99: Assembly tools for standardized tightening of threaded connections. Torque wrenches. Basic specifications
GOST R 51288-99: Means for measuring electric and magnetic quantities. Exploitation documents
GOST R 51558-2000: Television systems of security. General technical requirements and test methods
GOST R 51601-2000: Building single-bucket loaders. Specifications
GOST R 51750-2001: Energy conservation. Methods of determination of energy capacity on production of output and rendering of services in technological energy systems. General principles
GOST R 51945-2002: Aspirators. General specifications
GOST R 52007-2003: Carbon manufactured articles. Acoustic methods of control. Testing of acoustic waves velocity
GOST R 52152-2003: Long wall powered roof chocks. Basic parameters. General technical requirements. Test methods
GOST R 52320-2005: Electricity metering equipment (а.с). General requirements. Tests and test conditions. Part 11. Meters for electric energy
GOST R 52350.29.1-2010: Explosive atmospheres. Part 29-1. Gas detectors. General technical requirements and test methods for the detectors for flammable gases
GOST R 52455-2005: Global navigation satellite system and global position system. General-purpose maritime receiver equipment. Technical requirements
GOST R 52456-2005: Global navigation satellite system and global position system. Individual receiver equipment for automobile transport. Technical requirements
GOST R 52920-2008: Wheelsets for the traction railway stock. Method of measuring the electrical resistance
GOST R 52929-2008: Railway traction stock. Methods of controlling braking distance and parking brake
GOST R 53009-2008: Environmental control and monitoring systems. General guidelines on creation, adoption and ensuring functioning of the chemical weapons destruction
GOST R 53175-2008: Electric generating plants with gasoline internal combustion engines. General specifications
GOST R 53178-2008: Electric generating plants with gasoline, diesel and gas internal combustion engines. Test methods
GOST R 53191-2008: Wheelset assembly for locomotives and motor-powered units using shrink fit method. Typical technological process
GOST R 54455-2011: Alarm systems. Environmental test methods
GOST R 54523-2011: Port hydraulic structures. Rules of inspection and monitoring of the technical condition
GOST R 54798-2011: Control, monitoring and safety means of railway rolling stock. Safety requirements and control methods
GOST R 55175-2012: Mine atmosphere. Methods of dust content control
GOST R 55369-2012: Railway automatics and telemechanics equipment. General technical requirements
GOST R 8.561-95: State system of ensuring the uniformity of measurements. Metrological ensuring of bank technologies. General principles
GOST R 8.563-96: State system for ensuring the uniformity of measurements. Procedures of measurements
GOST R 8.589-2001: State system for ensuring the uniformity of measurements. Control of nature environment soiling. Metrological ensuring. General principles
GOST R 8.594-2002: State system for ensuring the uniformity of measurements. The metrological ensuring of radiation control. General principles
GOST R 8.595-2004: State system for ensuring the uniformity of measurements. Mass of petroleum and petroleum products. General requirements for procedures of measurements
GOST R 8.596-2002: State system for ensuring the uniformity of measurement. Metrological assurance for measuring system. Main principles.
GOST R 8.613-2005: State system for ensuring the uniformity of measurements. Procedures for quantitative chemical analysis of water samples. General requirements for development
GOST R 8.615-2005: State system for ensuring the uniformity of measurements. The measuring of quantity of taken from bowels oil and oil gas. General metrological and technical requirements
GOST R 8.642-2008: State system for ensuring the uniformity of measurements. Metrological maintenance of measuring systems of units of the account of thermal energy. Main principles
GOST R 8.655-2009: State system for ensuring the uniformity of measurements. Quality factors of electric power measuring instruments. General specification
GOST R 8.689-2009: Quality factors of electric power measuring instruments. State system for ensuring the uniformity of measurements. Test methods and equipment.
MI 2240-98: National Measurement Standards. Analysis of Measurement, Inspection, and Testing Practicies at Businesses, Organizations, and Associations. Work Execution Technique and Procedures
MI 2284-94: Recommendation. State system for ensuring uniformity of measurements. Documentation verification laboratories
MI 2304-08: GSOEI. Metrological supervision carried out by the metrological services of legal entities. Main provisions
MI 2304-94: Metrological Monitoring and Supervision by Metrological Services of Juridical Persons
MI 2377-98: National Measurement Standards. Development and Certification of Measurement Techniques
MI 2418-97: State system for ensuring uniformity of measurements. Classification and application of technical means for testing oil and petroleum products
MI 2438-97: State system for ensuring uniform measurement. Measuring systems. Metrological assurance. Basic provisions.
MI 2440-97: The State Measurements System. Methods of experimental determination and control characteristics of the error of measurement channels for measuring systems and measurement systems.
MI 2453-2000: GSE. Methods of radiation monitoring. General requirements
MI 2479-98: Heat meters. Typical test program for type approval purpose
MI 2500-98: National Measurement Standards. Basic Principles for Metrological Assurance for Small Businesses
MI 2526-99: State system for ensuring uniformity of measurements. Regulatory documents on methods of calibration of measuring instruments. Main provisions
MI 2536-99: State system for ensuring uniformity of measurements. Indicators of the quality of electrical energy at metering sites. General requirements for measurement procedures
MI 2538-99: State system for ensuring uniformity of measurements. Heat meters for water systems water supply COP ***. General metrological requirements
MI 2579-2000: State system for ensuring uniformity of measurements. Tanks (tanks) of river and sea bulk vessels. Method of verification by the volumetric method
MI 2627-2000: State system for ensuring uniformity of measurements. Means of measuring the volume of gas. Counters, flow meters. Method of verification. General provisions
MI 2640-2001: State system for ensuring uniformity of measurements. Mass (volume) amount of water consumed in circulating hot water supply systems for residential buildings. Measurement techniques. General provisions
MI 2646-2001: GSOEI. Description of the type of measuring instruments for the State Register. The order of construction and general requirements for the presentation and design
MI 2676-2001: Recommendation. State system for ensuring uniformity of measurements. Methods of metrological certification of algorithms and programs for processing data from measurement results when determining the volume and mass of oil and petroleum products. General
MI 2693-2001: Crude Oil Metering Oil Production Facilities
MI 2735-2002: Recommendation. GSE. A lot of oil. Methods for measuring the system of measuring the quantity and quality of oil UUN NSP "Sergeevka" NGDU "Ufaneft"
MI 2773-2002: Procedure for metrological and technical support for start-up of oil quantity and attributes measurement systems
MI 2775-2002: Recommendation. State system for ensuring uniformity of measurements. The order of metrological and technical support of industrial operation of measurement systems of quantity and quality indicators of oil, pipe piston calibration units and measuring ins
MI 2837-2003: Oil hand-over and acceptance points metrological and technical support
MI 2857-2004: GSE. Metrological support at the enterprises of the meat industry. Main provisions
MI 2891-2004: Recommendation. GSOEI. General requirements for measurement software
MI 2893-2004: Recommendation. State system for ensuring uniformity of measurements. Systems for measuring the quantity and quality of oil. Type approval tests. General provisions and organization of work in the system of the main pipeline transport of JSC AK Transneft
MI 2895-2004: Recommendation. GSE. Fuel dispensers. The method of periodic calibration. Merniki with special scales
MI 2950-2005: Recommendation. State system for ensuring uniformity of measurements. A lot of oil. Methods for performing measurements in horizontal tanks in the system of the main pipeline transport
MI 2951-2005: State system for ensuring uniformity of measurements. Crude oil mass. Methods of measurement in vertical tanks in the system of main pipeline transport
MI 2952-2005: State system for ensuring uniformity of measurements. Crude oil mass. Methods of measurement in railway tanks in the system of main pipeline transport
MI 2953-2005: State system for ensuring uniformity of measurements. Crude oil mass. Methods of measurement in automobile tanks in the system of the main oil pipeline transport
MI 2955-2005: GSE. Typical methods of certification of software measuring devices and the order of its implementation
MI 2971-2006: Recommendation. State system for ensuring uniformity of measurements. Technique and technology of works during calibration, calibration and adjustment of car scales using weighing car A-300
MI 2972-2006: State system of measuring uniformity provision. Petroleum mass. Method of measuring by the system of petroleum quantity and properties measuring system No.1005 JSC ´Shugurovskiy petrochemical plant´
MI 2974-2006: State system of measuring uniformity provision. Class 2 piston-pipe calibration rigs. Verification method for class 1 piston-pipe calibration rig with comparator
MI 2975-2006: State system of measuring uniformity provision. Petroleum mass. Indirect measuring method of dynamic measurements on the registration point pump station 'Suslovo' JSC 'Uraltransnefteproduct'
MI 2999-2006: Recommendation. GSOEI. Systems automated information-measuring commercial accounting of electric energy. Recommendations for writing a type description
MI 3020-2006: State system for ensuring uniformity of measurements. Tanks (tanks) steel horizontal cylindrical river bulk vessels (barges). Method of verification by the geometric method
MI 3021-2006: State system for ensuring uniformity of measurements. Natural gas consumption. Methods of measurement measurement systems with flow meters-meters RS-SPA-M
MI 3081-2007: Systems of measurement of quantity and quality of oil, light petroleum products and liquid hydrocarbons. Maintenance and repair. Basics
MI 3082-2007: State system for ensuring uniformity of measurements. The choice of methods and means of measuring flow and the amount of consumed natural gas, depending on the operating conditions at metering stations Recommendations on the choice of working standards for their calibration
MI 3151-2008: GSE. Mass flow meters. Methods of verification at the site of operation of a piston-calibration calibration unit complete with a flow density converter
MI 3200-2009: Recommendation. GSE. Mass of crude oil. Methods of measuring the system of measuring the amount and parameters of crude oil at the temporary loading point of the Bayandy field at the Chamber of Commerce and Industry Usinskneftegaz OOO Lukoil-Komi
MI 3206-2009: State system for ensuring uniformity of measurements. Systems for measuring the quantity and quality indicators of oil, petroleum products and liquid hydrocarbons. Rules of commissioning. Main provisions
MI 3213-2009: State system for ensuring uniformity of measurements. Consumption and volume of gas. Methods of measurement using ultrasonic flow transducers
MI 3241-2009: Recommendation. State system for ensuring uniformity of measurements. Mass and volume of petroleum products. Measurement technique indirect method of dynamic measurements
MI 3242-2009: State system for ensuring uniformity of measurements. Mass and volume of petroleum products. Methods of measurement in horizontal tanks
MI 3272-2010: State system for ensuring uniformity of measurements. Mass flow meters. On-site verification method with a compact prover complete with a turbine flow transducer and in-line density transducer
OST 108.004.10-86: Quality control program of nuclear energetics products.
OST 45.143-99: Sectoral uniformity measurement system. Guidelines for calibration of telecommunication measurement instruments. The order of development. Requirements for the construction, presentation, design and content
OST 45.192-2002: Measuring radiation sources for fiber-optic transmission systems. Technical requirements. Test methods
OST 45.92-96: Metrological Service of the Ministry of Communications of the Russian Federation. Organizational structure. Tasks and interaction of structural units
OST 68-4-93: Organization and procedure of testing devices of topographic-geodesic purpose.
OST 68-8.01-97: Organization and procedure of metrological assurance works regarding topographic-geodesic and cartographic production.
OST 68-8.02-97: Organization and procedure of metrological control and supervision in Russian cartography system.
OST 95 10571-2002: Measurement system for the purpose of accounting and control of nuclear materials. Main provisions
OST 95 18-2001: Scientific-research and experimental-design procedures. General provisions.
P SSFZhT 46-2001: The certification system for the federal railway transport. The order of development and certification of certification tests of railway equipment.
PB 09-297-99: Rules of setup and safe operation of compressor units with piston compressors operating on dangerously explosive and noxious gases
PMG 65-2003: State system for ensuring the uniformity of measurements. Rail tankers. General requirements for methods of verification by a volumetric method
PR 32.131-98: Rules for Metrology. Typical training program for calibrators measuring instruments of geometric quantities in railway transport
PR 50.2.007-2001: State system for ensuring the uniformity of measurements. Verification marks
PR 50.2.015-94: State system for ensuring uniformity of measurements. The procedure for determining the cost (price) of metrological works
PR 50.2.019-2006: The state system of measurements. Methods of measurement using the turbine, rotary and vortex meters
PR 50.2.023-2000: State System of Measuring Uniformity Provision. Testing procedures for validation of the type of gambling machines and establishing control of their conformity to the approved type
PR 50.2.027-2001: State system for ensuring uniformity of measurements. The procedure for testing and approval of the type of measuring instruments for special purposes
PR 50.2.104-09: State system for ensuring uniformity of measurements. Procedure for testing standard samples or measuring instruments for type approval
PR 50.2.105-09: Procedure for approving the type of reference standards or reference measuring instruments
PR 50.2.106-09: State system for ensuring uniformity of measurements. The procedure for issuing certificates of approval of the type of reference materials or the type of measuring instruments, the establishment and change of the validity of these certificates and the interval between inspections of measuring instruments
PR 50.2.107-09: State system for ensuring uniformity of measurements. Requirements for approval marks of the type of reference materials or the type of measuring instruments and the procedure for their application
R 50.2.030-2003: National Measurement Standards. Area of Application of Standard Specimens of the Composition and Properties of Substances and Materials Under the Jurisdiction of Government Metrological Monitoring and Inspection
R 50.2.040-2004: Metrological assurance of oil accounting when transferring via main pipeline system. Basic provisions
R 50.2.041-2004: State system for ensuring uniformity of measurements. Areometers glass. Method of verification
R 50.2.052-2006: State system for provision of uniformity of measurements. Procedure of validation of crude oil and oil gas output measuring devices conformity to metrological and technical requirements of GOST R 8.615-2005' State system for provision of uniformity of mea
RD 03-299-99: Requirements for acoustic emission equipment used to control hazardous production facilities
RD 03-31-95: Methods of organization and conducting inspection of metrological support of manufacturing at enterprises.
RD 10-117-95: Requirements for Installation and Safe Operation of Rail Tracks of Gantry Cranes
RD 11-08-2008: Standard inspection program during state construction supervision of nuclear facilities
RD 153-00.0-006-99: Sectoral system for ensuring the uniformity of measurements in the fuel and energy complex. Metrological control and supervision in the fuel and energy complex
RD 153-34.0-11.117-2001: Information and measurement systems. Metrological support. General provisions.
RD 153-39.4-041-99: Operating rules and regulations for trunk oil product pipelines.
RD 153-39-011-97: Instruction on accounting of oil products on trunk oil-products pipelines.
RD 31.1.02-04: Rules of technical operation of lifting and transport equipment of sea trading ports
RD 45.008-97: The program and test methods are typical for the purpose of approving the type of time-based telephone connection metering equipment (APUS) of local telephone communications
RD 45.023-98: Telecommunication Measurement Instruments. Methodical instructions for calibrating a digital signal analyzer of the Interceptor 147 type, an PCM-30 analyzer of the K4304 type, a PCM-1 type telephone channel meter Collection № 1. Methodological guidelines
RD 45.145-2000: Standards for error rates of digital channels with a speed of 64 kbps/s for the local network, including subscriber lines (access network)
RD 52.14.617-2000: Instructions. The order of the norm control
RD 52.24.508-96: Guidelines. Organization and functioning of the subsystem for monitoring the state of transboundary surface land waters
RMG 64-2003: State system for ensuring the uniformity of measurements. Providing measurement efficiency in control of technological processes. Methods and techniques to improve the accuracy of measurement
RMG 89-2010: State system for ensuring the uniformity of measurements. Acceptance point of oil. Metrological and technical assurance
RT 02-2008: Organization of verification of measuring instruments and the procedure for developing documents on verification methods
SO 34.35.146-2003: Guidelines for the creation of automated process control systems for water treatment plants (TLU) power plants
ST SSFZhT TsT 049-99: Transmission hydraulic for diesel locomotives and diesel trains. Typical test method
Customers Who Viewed This Item Also Viewed:
|
Limit dimension deviation from 0,1 to 10000 mm and surface shape and arrangement allowances, not specified on drawings.
Language: English |
Rules of development, coordination, approval and composition of technical and economic assessment for construction
Language: English |
Mineral fertilizers. Method for determination of dynamic strength and attrition
Language: English |
Diesel fuel EURO. Specifications
Language: English |
Inch thread with a profile angle of 55 degrees
Language: English |
Vessels and apparatus. Norms and methods of strength calculation. General requirements
Language: English |
Norms of structural design of nuclear power plants with reactors of different types
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.