imgalt

GOST 12.4.004-74

ГОСТ 12.4.004-74

Filtering protective mask RPG-67

Респираторы фильтрующие противогазовые рпг-67

Status: Not effective - Superseded. Information on the registration of 788-st dated June 24, 2015 (the official website of Rosstandart); (IUS 2-2016)

The standard applies to mounted, semi-mounted, mounted, trailed, semi-trailed agricultural machines and implements (hereinafter referred to as machines), aggregated with various power means (tractors, self-propelled chassis, etc.) that make up the agricultural unit, the design specification of which is approved after the introduction of this standard. The standard establishes general requirements that ensure labor safety when using machines for their intended purpose, maintenance, repair, transportation and storage. The standard does not apply to machines used in animal husbandry, as well as to the means of small-scale mechanization. The standard is fully consistent with ST SEV 5605-86.

Стандарт распространяется на фильтрующие противогазовые респираторы РПГ-67, состоящие из резиновой полумаски с оголовьем и обтюратором, двух пластмассовых манжет и двух сменных фильтрующих патронов и предназначенные для защиты органов дыхания от воздействия вредных паров и газов (кроме особо токсичных), присутствующих в воздухе рабочей зоны производственных помещений. Условия применения респираторов РПГ-67: содержание в воздухе свободного кислорода - не менее 16%, суммарная концентрация вредных парогазообразных веществ, превышающих ПДК - не более чем в 15 раз.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: State Committee of Standards of the Council of Ministers of the USSR, 6/4/1974

SKU: RUSS18308

Price: $300.00



imgalt

The Product is Contained in the Following Classifiers:

PromExpert » SECTION III. LABOR PROTECTION AND SAFETY » II Industrial sanitation and occupational health » 8 Personal protective equipment » 8.2 Respiratory, hearing protection »

ISO classifier » 13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY » 13.340 Protective equipment » 13.340.30 Respiratory Protection Devices »

National standards » 13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY » 13.340 Protective equipment » 13.340.30 Respiratory Protection Devices »

National Standards for KGS (State Standards Classification) » Latest edition » L Chemical products and rubber-asbestos products » L0 General rules and regulations for chemical industry » L07 Safety »


The Document is Replaced With:

GOST 12.4.296-2015: Occupational safety standards system. Respiratory protective devices. Filtering gas half мasks. General specifications

The Document References:

GOST 10188-74: Filtering boxes for protective masks and respirators. Method of determining resistance to constant air flow

GOST 10354-82: Polyethylene film Specifications

GOST 12.4.034-85: Occupational safety standards system. Means for individual protection of breathing organs. Classification and marking

GOST 12.4.158-90: Occupational safety standards system. Means for individual protection of breathing organs. Methods of testing all-service canisters protection time against noxious vaporous contaminants

GOST 12.4.159-90: Occupational safety standards system. Means for individual protection of breathing organs. Methods of testing all-service canisters protection time against noxious gaseous contaminants

GOST 13511-91: Boxes of corrugated board for food-stuffs, matches, tobacco and detergents. Specifications

GOST 13512-91: Boxes made of corrugated cardboard for confectionery

GOST 13516-86: Corrugated cardboard boxes for canned food, preserves and food liquids. Specifications

GOST 13841-95: Corrugated board boxes for chemical products. Specifications

GOST 14192-96: Cargo marking

GOST 15102-75: Universal metallic closed container of nominal gross mass 5,0 tn. Specifications

GOST 15623-84: Wooden cases for tools and accessories. Specifications

GOST 15841-88: Wooden boxes for the production of agricultural and tractor machine-building industry

GOST 16148-79: Wooden boxes for rolling bearings. Specifications

GOST 16511-86: Wooden boxes for electrical equipment. Specifications

GOST 16536-90: Wooden boxes for automotive industry products

GOST 20435-75: Universal metallic closed container of nominal gross mass 3,0 tn. Specifications

GOST 24104-88: General purpose and reference laboratory balances

GOST 2991-85: Wooden uncollapsible cases for weights up to 500 kg. General specifications

GOST 6662-73: Paper for wrapping explosives. Specifications

GOST R 12.4.195-99: Occupational safety standards system. Respiratory protective devices. Classification

The Document is Referenced By:

FR 1.31.2005.01759: Quantitative chemical analysis of soils. The methodology for measuring the chloride content in solid and liquid wastes of production and consumption, sediments, sludge, activated sludge, bottom sediments by the mercury method

FR 1.31.2009.05394: Quantitative chemical analysis of soils. Methodology for measuring the mass fraction of moisture in solid and liquid wastes of production and consumption, soils, sediments, sludges, activated sludge, bottom sediments by gravimetric method

GOST 10227-2013: Jet fuels. Specifications

GOST 10760-76: Electrical insulating varnish ВЛ-941. Specifications

GOST 12.3.041-86: Occupational safety standards system. Use of pesticides for plant protection. Safety requirements

GOST 12.3.043-90: Occupational safety standards system. Industrial technologies of optical coating application on pieces. General safety requirements

GOST 12308-2013: Thermostable fuels T-6 and T-8B for jet engines. Specifications

GOST 15865-70: Insulating varnish MЛ-92. Specifications

GOST 1639-2009: Non-ferrous metals and alloys scrap and waste. General specifications

GOST 1639-78: Non-ferrous metals and alloys scrap and waste. General specifications

GOST 1639-93: Non-ferrous metals and alloys scrap and waste. General specifications

GOST 2081-92: Carbamide

GOST 20996.0-82: Selenium. General requirements for methods of analyses

GOST 2184-2013: Sulphuric acid for industrial use. Specifications

GOST 28426-90: Thermo diffusion strengthening and protection of metal products. General requirements for technological process

GOST 32148-2013: Foodstuffs of processed poultry eggs. Method for identification of poultry egg species

GOST 33119-2014: Polymer composites constructions for foot-bridges. Specifications

GOST 33123-2014: Pipe culverts made of polymer composites. Specifications

GOST 33344-2015: Constructive pultruded profiles from polymer composites. General specifications

GOST 33345-2015: Polymer composites. Production of plates for preparation of test specimens. General technical requirements

GOST 33369-2015: Fibre-reinforced thermosets for the strengthening and restoration of building structures. General specifications

GOST 33370-2015: Staple chemical fibres for reinforcement of building materials and structures. General specifications

GOST 33376-2015: Polymer composite deck sections for pedestrian and highway bridges and overbridges. General specifications

GOST 33463.6-2016: Life support systems on railway rolling stock. Part 6. Methods of hygienic assessment of the water supply system

GOST 5382-91: Cements and materials for cement production. Chemical analysis methods

GOST 5470-75: Lacquers of ПФ-283 and ГФ-166 types. Specifications

GOST 6465-76: Enamels PF-115. Specifications

GOST 64-77: Enamels ГФ-230 BЭ. Specifications

GOST 9.045-75: Unified system of corrosion and ageing protection. Paint coatings. Accelerated methods of light-fastness determination

GOST 9.402-2004: Unified system of corrosion and ageing protection. Paint coatings. Metal surface preparation for painting

GOST 9.402-80: Metal surface preparation for painting

GOST 9816.0-84: Technical tellurium. General requirements for methods of analysis

GOST R 12.4.188-2000: Occupational safety standards system. Filtering goggle against vaporous and gaseous toxic substances. Technical requirements and test methods

GOST R 51569-2000: Inert powder. Specifications

GOST R 53237-2008: Fiber glass. General requirements for safety in the course of Production and Application

GOST R 53630-2009: Pressure multilayer pipes for water-supply and heating systems. General specifications

GOST R 54056-2010: Foodstuffs of processed poultry eggs. Method for identification of poultry egg species

GOST R 54560-2011: Fiberglass reinforced thermosetting plastic pipes and parts of pipelines. Specifications

GOST R 54560-2015: Fibre reinforced thermosetting plastic pipes and parts of pipelines. Specifications

GOST R 54564-2011: Non-ferrous metals and alloys scarp and waste. General specifications

GOST R 54848-2011: See attached file. General specifications. Тest methods

GOST R 55072-2012: Fiberglass reinforced thermosetting plastic vessels. Specifications

GOST R 55073-2012: Resistance polymer composites for repairing industrial pipe-line. Specifications

GOST R 55074-2012: Chemical resistance polymer composites for lining industrial tanks and vessels. General specifications

GOST R 55075-2012: Sections of pipelines derived from composite materials intended for installation and rehabilitation of public water and wastewater systems. Specifications

GOST R 56207-2014: Slabs and tiles of engineered stone on the basis of natural quartz. Specifications

GOST R 56277-2014: Polymer composite pipes and fittings for intrafield pipelines. Specifications

GOST R 57253-2016: Fodder yeast-Paprin. Specifications

Manual for SNiP 3.05.01-85: Manual for the production and acceptance of work when installing ventilation and air conditioning systems

MDS 12-16.2003: Recommended Practice for the Development of Local Regulations (Proprietary Standards) for Use in an Occupational Safety and Health Management Systems in a Construction Organization

Methodical instructions 2942-83: Improvement of working conditions at enterprises producing and using phosphors

MI 2728-2002: State system for ensuring uniformity of measurements. The list of regulatory documents on security requirements. The order of their application in the normative documents of the ICE

MUK 4.1.001-13: Methods of measuring the mass concentration of formaldehyde in samples of drinking, natural, treated wastewater and melted snow (snow) by the photometric method

MUK 4.1.008-13: Method for measuring the mass concentration of dimethylamine in samples of drinking, natural, treated wastewater and snowmelt (snow) by the photometric method

MUK 4.1.2881-11: Determination of soy protein isolate in the composition of meat products

ODM 218.4.002-2009: Recommendations for protection against corrosion of structures used on the roads of the Russian Federation bridges, fences and road signs

OST 107.12.028-2002: Occupational safety standards system. Flammable, combustible, chemically hazardous and harmful substances. Safety requirements for use, storage and transportation

OST 36-100.3.06-85: Occupational safety standards system. Special works on the erection of high-level reinforced concrete structures. Safety requirements.

PNST 63-2015: Materials from multiwall carbon nanotubes. Specifications

POT R O-14000-001-98: Rules on labor protection at enterprises and organizations of mechanical engineering

R 466-82: Guidelines for conducting induction training on labor protection in organizations and enterprises of the Ministry of Oil and Gas Industry

R 50-601-21-92: Recommendations. Establishment of product safety requirements in standards and technical conditions

RD 153-39.4-075-01: Rules of maintenance overhaul of oil-trunk pipeline at waterway, railway and category I-IV highway crossings.

RD 31.11.81.39-83: Technical conditions of sea transportation of isobutyl alcohol in bulk

RD 31.11.81.40-83: Technical conditions of bulk carriage of isopropyl alcohol

RD 31.11.81.41-83: Technical conditions of sea transportation of diethylhexanol (isooctyl alcohol) in bulk

RD 31.11.81.42-83: Technical Specifications for Maritime Transport of Bulk Gas Condensate

RD 31.11.81.44-83: Technical Specifications for Maritime Transport of Bulk Ammonia

RD 31.52.08-81: Caprolon steering gear bearings. Technological requirements for the manufacture and installation of ship repair

RD 31.52.17-86: Recommendations for artificial heating when painting ships in docks

RD 31.6.07-2002: Instructions for maintenance of navigation equipment of marine approach channels and harbour areas.

RD 31.83.04-89: Labour safety rules in companies of the Ministry of Navy of the USSR.

RD 34.03.105: Procedural Guidelines for Organization of Safety and Industrial Sanitation Work at Electric Power Generating Stations and in Power Grids

RD 34.03.605: Recommended Practice for Use of Personal Protective Equipment for Workers and Employees of Minenergo USSR and for Organization of Maintenance Thereof

RD 34.46.605: Transformers at Voltage of 110-1150 kV, with Power of 80 MVxA and Above

RD 39-0147103-358-89: Instruction on the process of overhaul of underwater oil pipelines by the method of grafting on category I-III soils using existing technical means

Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope

SP 4783-88: Sanitary regulations for the production of synthetic polymeric materials and enterprises for their processing

SP 4950-89: Sanitary regulations for the production of carbon-based materials (coal, graphitized, fibrous, composite)

SP 5312-91: Sanitary rules for the enterprises of copper-nickel industry

ST TsKBA 021-2004: Painting and conservation of pipeline valves and drive devices for it supplied for nuclear power plants. Typical technological instructions for cleanliness, dyeing and conservation

TOI R-32 TsV 001-94: Standard labor protection instructions for refrigerators section mechanics

TU 2311-042-21743165-2005: Varnish "Yarly" V-PL-1120. Technical conditions

TU 2312-075-21743165-2005: Enamel "YARLI" V-MA-1232. Technical conditions

TU 6-10-1270-87: Varnish BT-5101

VSN 38-90: Technical Guidelines for the Construction of High-Friction Road Pavements

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Heating, Ventilation and Air Conditioning (HVAC)
Language: English
Price: $430.00
imgalt
Rules of Electrical Installations Design (Russian Electrical Code). 7th Edition. All sections and exhibits
Language: English
Price: $478.76
imgalt
Technical regulations of Customs Union. On safety of rolling stock
Language: English
Price: $181.30
imgalt
Sponge titanium. Specifications
Language: English
Price: $79.00
imgalt
Goat whole drinking milk. Specifications
Language: English
Price: $168.00
imgalt
Loads and impacts
Language: English
Price: $306.00
imgalt
Seamless steel pipes for steam boilers and pipelines
Language: English
Price: $581.17
imgalt
Packaging. Determination of formaldehyde concentration in water and model environments
Language: English
Price: $217.00
imgalt
Conformity assessment system in the field of atomic energy use. Conformity assessment in the form of control. Unified techniques. Capillary control
Language: English
Price: $226.00
imgalt
Conformity assessment system in the field of atomic energy use. Conformity assessment in the form of control. Unified techniques. Visual and measuring control
Language: English
Price: $348.00
imgalt
Pipe fittings. Passport. Rules for development and design
Language: English
Price: $254.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!