GOST 16523-89
ГОСТ 16523-89
|
|
Rolled sheets from carbon quality and ordinary steel for general purposes
Прокат тонколистовой из углеродистой стали качественной и обыкновенного качества общего назначения
Status: Not effective - Superseded. IUS 7-1999
The standard applies to hot and cold rolled sheets of carbon steel of high quality and ordinary quality of general purpose, manufactured with a width of 500 mm and more, up to 3.9 mm thick.
Стандарт распространяется на тонколистовой горячекатаный и холоднокатаный прокат из углеродистой стали качественной и обыкновенного качества общего назначения, изготовляемый шириной 500 мм и более, толщиной до 3,9 мм.
Choose Language:
Format: Electronic (pdf/doc)
Approved: USSR State Committee for Standards,
10/9/1989
SKU: RUSS18326
The Product is Contained in the Following Classifiers:
Welding regulations »
Main materials »
Welding regulations »
welding equipment »
Welding regulations »
Documentation »
Welding regulations »
Mechanical Testing »
Welding regulations »
Heat treatment »
Welding regulations »
Main materials »
Steel, cast iron »
Welding regulations »
Main materials »
Non-ferrous metals »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.12 Testing and control of products of metallurgical industry »
4.12.4 Iron and steel products »
ISO classifier »
77 METALLURGY »
77.140 Iron and steel products »
77.140.50 Steel sheet products and semi-finished products »
National standards »
77 METALLURGY »
77.140 Iron and steel products »
77.140.50 Steel sheet products and semi-finished products »
ISO classifier »
77 METALLURGY »
77.140 Iron and steel products »
77.140.60 Steel bars and wire rod »
National standards »
77 METALLURGY »
77.140 Iron and steel products »
77.140.60 Steel bars and wire rod »
National Standards for KGS (State Standards Classification) »
Latest edition »
V Metals and metal products »
V2 Carbon steel of ordinary quality (ordinary stock) »
V23 Sheets and Stripes »
National Standards for OKSTU »
FINISHED ROLLED STEELS (INCLUDING BILL FOR EXPORT) »
Rolled sheet metal and sheet metal »
National Standards for OKSTU »
FINISHED ROLLED STEELS (INCLUDING BILL FOR EXPORT) »
High-quality sheet products (without cold-rolled structural, stainless and transformer steel) »
National Standards for OKSTU »
FINISHED ROLLED STEELS (INCLUDING BILL FOR EXPORT) »
Cold-rolled structural steel, stainless steel, transformer steel, low-magnetic alloys and ARMCO »
The Document is Replaced With:
GOST 16523-97: Rolled sheets from quality and ordinary carbon steel for general purposes. Specifications
As a Replacement Of:
GOST 16523-70: Rolled sheets from carbon quality and ordinary steel for general purposes. Specification
The Document References:
GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications
GOST 10510-80: Metals. Erikson test method for sheets and strips extrusion
GOST 11701-84: Metals. Methods of tensile testing of thin sheets and strips
GOST 14019-80: Metals. Methods of bend tests
GOST 1497-84: Metals. Methods of tension test
GOST 1763-68: Steel. Methods for determination of decarbonised layer depth
GOST 19903-74: Hot-rolled steel sheets. Dimensions
GOST 19904-90: Cold-rolled steel sheets. Dimensions
GOST 22536.0-87: Carbon steel and unalloyed cast iron. General requirements for methods of analysis
GOST 22536.1-88: Carbon steel and unalloyed cast iron. Methods for determination of general carbon and graphite
GOST 22536.2-87: Carbon steel and unalloyed cast iron. Methods for the determination of sulfur
GOST 22536.3-88: Carbon steel and unalloyed cast iron. Methods for determination of phosphorus
GOST 22536.4-88: Carbon steel and unalloyed cast iron. Methods for determination of silicon
GOST 22536.5-87: Carbon steel and unalloyed cast iron. Methods for determination of manganese
GOST 22536.6-88: Carbon steel and unalloyed cast iron. Methods for determination of arsenic
GOST 22536.7-88: Carbon steel and unalloyed cast iron. Methods for determination of chromium
GOST 22536.8-87: Carbon steel and unalloyed cast iron. Methods for determination of copper
GOST 2284-79: Cold-rolled carbon structural steel strip
GOST 380-88: Common quality carbon steel. Grades
GOST 5639-82: Steel and alloys. Methods for detection and determination of grain size
GOST 7564-73: Steel. General rules of samples, blanks and test pieces for mechanical and technological tests
GOST 7565-81: Iron, steel and alloys. Sampling for determination of chemical composition
GOST 7566-81: Rolled stock and products for further treatment
The Document is Referenced By:
GOST 10403-80: Constructional steel trowels. Technical requirements
GOST 10551-75: Steel roll-formed corrugated sections. Range
GOST 10707-80: Steel cold shaped electrically welded tubes technical conditions
GOST 10778-83: Spatulos. Specifications
GOST 10982-75: Write enamel ЭП-148 for refrigerators and other electrodomestic devices. Specifications
GOST 11066-74: Thermostable silicoorganic lacquers and enamels. Specifications
GOST 12034-77: Enamels MЛ-165, MЛ-165ПM and MC-160. Specifications
GOST 12132-66: Electrowelded and seamless steel tubes for automotive and bicycle industries. Specifications
GOST 12707-77: Wash primers. Specifications
GOST 13154-67: Floating clamps for machine retaining devices. Design and dimensions
GOST 13950-91: Welded and folded steel barrels
GOST 14294-75: Pneumatic hand shears and nibblers. Specifications
GOST 14923-78: Enamels ПФ-223. Specifications
GOST 15081-78: Silico-organic thermostable varnish KO-08. Specifications
GOST 15140-78: Paintwork materials. Methods for determination of adhesion
GOST 16302-79: Primer ФЛ-086. Specifications
GOST 16523-97: Rolled sheets from quality and ordinary carbon steel for general purposes. Specifications
GOST 17065-94: Wound cardboard drums
GOST 17066-80: Low-alloyed structural steel sheets and strips in coils. Marks and technical requirements
GOST 17327-95: Bread baking forms
GOST 17380-83: Seamless welded steel pipeline components for Pn £ 10 MPa (£ 100 kgf/cm2). Specifications
GOST 17678-80: Light cramps for pipe-line and cable fixing. Design and dimensions
GOST 17679-80: Light yokes for pipe-line and cable fixing. Design and dimensions
GOST 17680-80: Earrings lightweight for attaching cables. Design and dimensions
GOST 18099-78: Enamels ML-152. Specifications
GOST 18297-96: Pig-iron enameled sanitary devices. Technical conditions
GOST 18335-83: Enamel НЦ-184. Specifications
GOST 18679-73: Ears for sealing. Design and dimensions
GOST 19024-79: Enamels AC-182. Specifications
GOST 19030-73: Thimbles. Design and dimensions
GOST 19851-74: Ribbon from carbon cold-rolled cut steel
GOST 20481-80: Enamels MЛ-1110. Specifications
GOST 20811-75: Paintwork materials. Methods for coating abrasion test
GOST 20824-81: Varnish ЭП-730. Specifications
GOST 21028-75: Jigs for machining holes of moulding boxes and pattern plates. Specifications
GOST 21227-93: Enamels ПФ-218. Specifications
GOST 21824-76: Enamels Xc-119 And Xc-119e Specifications
GOST 22369-77: Enamels ЭП-567. Specifications
GOST 22414-77: Metal closets for keeping clothes in sanitary and servicing premises of industrial enterprises. General specifications
GOST 22438-85: Enamels ЭП-525. Specifications
GOST 22564-77: Enamels KO-84 and KO-859. Specifications
GOST 23123-78: Silvery enamel KO-83. Specifications
GOST 23143-83: Enamels ЭП-773. Specifications
GOST 23343-78: Primer ГФ-0119. Specifications
GOST 23599-79: Enamels type ЭП-255 and ЭП-275. Specifications
GOST 23626-79: Emali HV-714. Tehnicheskie usloviya
GOST 23695-94: Enamelled steel sanitary appliances. Specifications
GOST 23760-79: Enamels MЧ-145. Specifications
GOST 24045-94: Steel shaped sheets with trapezoid corrugations for construction
GOST 24595-81: Primer B-MЛ-0143. Specifications
GOST 24709-81: Enamels ЭП-140. Specifications
GOST 24784-81: Enamels ПФ-188. Specifications
GOST 25366-82: Enamel ЭП-5116. Specifications
GOST 25483-95: Garden watering pots
GOST 25577-83: Steel bent closed welded square and rectangular sections. Specifications
GOST 25930-83: Plastic covers for cylindrical connectors. Specifications
GOST 2593-82: Coupling air brake hoses for railway rolling stock. Specifications
GOST 3559-75: Steel band for armoring cables
GOST 4430-78: Containers for motion picture films, film material and magnetic tapes. Specifications
GOST 4765-73: Pain and lacquer materials. Method of determination impact resistance
GOST 5105-82: Steel fuel and oil tanks
GOST 5521-86: Weldable steel for shipbuilding
GOST 5971-78: Enamels for instruments. Specifications
GOST 6247-79: Steel welded barrels with rolling hoops on the shell
GOST 6586-77: Black paste (oil base) MA-015. Specifications
GOST 6631-74: Enamels НЦ-132. Specifications
GOST 6745-79: Enamel ГФ-1426. Specifications
GOST 7462-73: Enamels НЦ-5123. Specifications
GOST 7511-73: Steel sections for window and lantern transoms and window panels of industrial buildings. Specifications
GOST 7945-86: Scoops for finishing works. Specifications
GOST 8292-85: Oil and paste color paints
GOST 8594-80: Installation boxes for switches and plug sockets for flush wiring
GOST 8802-78: Passenger tram-cars. Specifications
GOST 9109-81: Primers ФЛ-03k and ФЛ-03Ж. Specifications
GOST 9533-81: Trowels, tuck pointing tools. Specifications
GOST 9640-85: Enamels ЭП-51. Specifications
IM 4-12-95: Automation systems. Handbook of materials. Part 1. Basic materials
KPO 02.05.09-06: Catalog-list of equipment. Connectors and sockets plugs, clips, boxes
NPB 236-97: Fire retardant compositions for steel constructions. General requirement. Method for determining fire retardant efficiency
OST 108.838.01-75: Continuous blowdown separator of nominal diameter 800. Design and technical requirements.
OST 153-34.0-1005-99A: Assembly units and suspension parts of nuclear power plant station pipelines Py <= 4.0 MPa (40 kgf/cm2). Suspension block spring doubled. Design and dimensions
OST 153-34.0-1005-99А: Assembling units and station pipeline hang details of nuclear power plants. Nominal pressure is no more than 4,0 MPa. Spring dual block of hang. Design and dimensions.
OST 153-34.0-1006-99A: Assembly units and suspension parts of nuclear power plant station pipelines Py <= 4.0 MPa (40 kgf/cm2). Suspension block spring support. Design and dimensions
OST 153-34.0-971-99A: Assembly units and support parts of the station piping of nuclear power plants Py <= 4.0 MPa (40 kgf/cm2). Sleeve for passage through the roof. Design and dimensions
OST 153-34.0-976-99A: Assembly units and parts of the supports of the station pipelines of nuclear power plants Py <= 2.5 MPa (25 kgf/cm2). Shells welded sliding supports, guides and fixed. Design and dimensions
OST 153-34.0-976-99А: Assembling units and support station pipeline details of nuclear power plants. Nominal pressure no more than 2,5 MPa. The holder of the welded and sliding, guide rail and fixed supports. Design and dimensions.
OST 24.838.17-74: Stationary steam boilers. Turbo-steam separators. Types, design and dimensions. Technical requirements.
OST 26-01-1512-76: Axial lens compensators for PN <= 2,5 MPa (25 kgf / cm2). Technical requirements
OST 26-04-1039-74: Parts for mounting pipes with a diameter from 6 to 95 mm. Design and dimensions
OST 26-04-2384-79: Transportation plugs for working P 0 MPa (0 kg/cm2). Design and dimensions.
OST 26-04-2385-79: Transportation plugs for working P 0 MPa (0 kg/cm2), working P 0.04 MPa (0.4 kg/cm2). Design and dimensions.
OST 26-07-2027-80: Symbols of materials in the design documentation.
OST 3-1686-90: Billets made of structural steel for engineering. General Specifications.
OST 34-10-569-93: Axial single-lens compensator for Pnom ≤1.6 MPa (16 kg/cm2). Design and dimensions.
OST 34-10-570-93: Axial two-lens compensator for Pnom ≤1.6 MPa (16 kg/cm2). Design and dimensions.
OST 34-10-571-93: Axial three-lens compensator for Pnom ≤1.6 MPa (16 kg/cm2). Design and dimensions.
OST 36-146-88: Bearings for steel industrial pipelines for P 10 MPa. Specifications.
OST 36-60-81: Welding at installation of steel building constructions. Main provisions.
PGVU 090-93: Dust-gas and air pipelines of thermal power plants. General technical requirements
PGVU 242-92: Round lens compensators for gas and air ducts (DN 200 - 6000 mm). Round single-lens compensator for gas and air ducts
PGVU 243-92: Round lens compensators for gas and air ducts (DN 200 - 6000 mm). Round double compensator for gas and air ducts
PGVU 244-92: Round lens compensators for gas and air ducts (DN 200 - 6000 mm). Three-way round compensator for gas and air ducts
PGVU 245-92: Round lens compensators for gas and air ducts (DN 200 - 6000 mm). Four-sided round compensator for gas and air ducts
PGVU 246-92: Compensator, rectangular single lens for gas and air ducts
PGVU 247-92: Compensator, rectangular two-lens for gas and air ducts
PGVU 248-92: Three-slip rectangular compensator for gas and air ducts
PGVU 249-92: Four-sided rectangular compensator for gas and air ducts
RD 153-34.0-45.510-98: Model Guidelines for Operation and Repair of Slip Rings and Brushes of Turbine Generators with Power of 63 MW and Above
RD 24.030.142-88: Methodological instructions. Selection of steel products for construction of stationary boilers.
RM 4-150-92: Process automation systems. Integrated norms of consumption of materials and products
RST RSFSR 516-88: Eaves metal. Technical conditions
RST RSFSR 643-80: Black steel economic dishes . General specifications
RST RSFSR 655-81: Ice screws fishing. General technical conditions
RST RSFSR 698-83: Ovens made of sheet steel. Technical conditions
RST RSFSR 91-78: Percussion musical instruments. General technical requirements
TU 102-237-85: Mobile buildings (inventory) of the block of the "Watch" system. Group specifications
TU 102-377-84: A set of elements for mobile (inventory) collapsible buildings of the structural construction system SKZ-M. Group specifications
TU 102-529-89: Mobile buildings (inventory) of the block-containers of the panel construction of the Neftegazstroy system
TU 36-1181-77: Steps and elements of pressed flooring. Technical conditions
TU 36-1199-81: Slatted welded floor type "Visp". Technical conditions
TU 36-2287-80: Bent closed welded square and rectangular profiles
TU 5262-001-23083253-96: Expanded steel sheets. Technical conditions
TU 6-10-1117-85: Primer EP-057 Protector
VSN 104-93: Design and Installation Standards for Waterproofing for Subway Tunnels Constructed Using Opencast Method
VSN 370-93: Instructions for the installation of electrical wiring in pipes
Customers Who Viewed This Item Also Viewed:
 |
Petroleum products. Method for measurement of viscosity by automatic capillar viscosimeter
Language: English |
Greases. Method for determination of ultimate strength and thermostrengthening
Language: English |
Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads
Language: English |
Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
Language: English |
Pipe fittings. Ball valves made of brass. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.