GOST 20799-88

ГОСТ 20799-88

Industrial oils Specifications

Масла индустриальные Технические условия.

Status: Effective - Supersedes. IUS 1-1989 Date of introduction postponed from 01/01/92 to 01/01/94; Fast. No. 158 dated 02/14/92 (IUS 5-92) The limitation of effectiveness period has been lifted: Protocol No. 4-93 of the IGU dated 10/21/93 (IUS 4-1994)

The standard applies to subgroup A industrial oils, which are refined distillate and residual oils or mixtures thereof without additives, used in machinery and machinery of industrial equipment, whose working conditions do not impose special requirements on the antioxidant and anticorrosion properties of oils, as well as hydraulic fluids and base oils.

Стандарт распространяется на индустриальные масла подгруппы А, представляющие собой очищенные дистиллятные и остаточные масла или их смеси без присадок, применяющиеся в машинах и механизмах промышленного оборудования, условия работы которых не предъявляют особых требований к антиокислительным и антикоррозионным свойствам масел, а также в качестве гидравлических жидкостей и базовых масел.

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 8

Approved: USSR State Committee for Standards, 9/29/1988

SKU: RUSS18344

Price: $73.72




The Product is Contained in the Following Classifiers:

Evidence base (TR CU, Technical Regulation of the Customs Union) » 030/2012 TR CU. On requirements for lubricants, oils and special fluids » Regulations and standards (to 030/2012 TR CU) »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.9 Testing and control of chemical and industrial products » 4.9.9 Petroleum products of industrial and domestic consumption, lubricating oils and greases, plastic »

ISO classifier » 75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION » 75.100 Lubricants, industrial oils and related products »

National standards » 75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION » 75.100 Lubricants, industrial oils and related products »

National Standards for KGS (State Standards Classification) » Latest edition » B Oil products » B2 Lubricating oils » B22 Industrial oils »


As a Replacement Of:

GOST 20799-75: Industrial oils. Specifications

The Document References:

GOST 1057-88: Solvent refined oils. Method for the determination of phenol and cresol content

GOST 11362-96: Petroleum products and lubricants. Neutralization number. Potentiometric titration method

GOST 12.1.007-76: Noxious substances. Classification and general safety requirements

GOST 1437-75: Dark petroleum products accelerated method for determination of sulfur

GOST 1461-75: Petroleum and petroleum products. Method of ash test

GOST 1510-84: Petroleum and petroleum products. Marking, packing, transportation and storage

GOST 1520-84: Selectively refined oils. Method for determination of furfural presence in oils

GOST 15886-70: Mineral oils. Method for the determination of gum

GOST 17479.4-87: Industrial oils

GOST 18136-72: Oils. Method for determination of oxidation stability in a universal apparatus

GOST 20284-74: Petroleum products. Method for determination of colour on colorimeter ЦНТ

GOST 20287-91: Petroleum products Method of test for flow point and pour point

GOST 20799-75: Industrial oils. Specifications

GOST 2477-65: Petroleum and petroleum products. Method for determination of water content

GOST 2517-85: Crude oil and petroleum products. Methods of sampling

GOST 33-2000: Petroleum products. Transparent and opaque liquids. Determination of kinematic viscosity and calculation of dynamic viscosity

GOST 3900-85: Petroleum and petroleum products. Method for determination of density

GOST 4333-87: Petroleum products. Methods for determination of flash and ignition points in open crucible

GOST 5985-79: Petroleum products. Method for determination of acidity and acid number

GOST 6307-75: Petroleum products. Method of test for water-soluble acids and alkalies

GOST 6370-83: Petroleum, petroleum products and additives Methods for determination of mechanical admixtures

GOST 859-2001: Copper. Grades

The Document is Referenced By:

GKINP 15-236-91: Instructions for printing processes in kartoizdaniya

GOST 10144-89: Enamels XB-124Specifications

GOST 10160-75: Magnetically soft precision alloys

GOST 10210-83: Pneumatic impact nut wrenches. Basic parameters

GOST 10234-77: Moderate strength flattened

GOST 1033-79: Fatty cup grease. Specifications

GOST 10533-86: Cold-rolled thermostatic bimetal strip

GOST 11906-77: Spiral bevel and hypoid gear-shaping cutter heads. Specifications

GOST 12.4.129-2001: Occupational safety standards system. Special foot-wear, personal means of hands protection, special protective clothes and materials for their manufacture. Method for determination of petroleum and petroleum products penetration

GOST 12.4.165-85: Occupational safety standards system. Protective leather footwear. Determination of the coefficient of attachment strength decrease due to aggressive media action

GOST 12261-87: Afk additive

GOST 12766.1-90: High electrical resistant wire made of precision alloys

GOST 12766.2-90: Strip from precision high electric resistance alloys

GOST 12935-76: Free wheeling clutch of agricultural machines. Specifications

GOST 14080-78: Precision alloy strip with specified temperature coefficient of linear expansion. Specifications

GOST 14081-78: Wire of precision alloys with specified temperature coefficient of linear expansion. Specifications

GOST 14082-78: Bars and plates precision alloys with assigned temperature coefficient of linear expansion. Specifications

GOST 14117-85: Strip made from precision alloys for elastic elements

GOST 14118-85: Wire made of precision alloys, designed for elastic elements

GOST 1425-93: Lief springs for railway rolling stock. Technical requirements

GOST 14618.12-78: Essential oils, aromatics and their intermediates. Methods for determination of distillation, melting and congelation temperature limits

GOST 14955-77: Quality round steel with a special surface finish

GOST 15127-83: Solid worm hobs for cutting of teeth on the sprockets for the driving roller chains and bush chains

GOST 15146-69: Thermal-treated steel tape for musical instrument reeds. Specifications

GOST 15156-84: Lubricating oils, lubricants and special liquids for industrial use in tropical climate regions

GOST 15763-2005: Threaded and flange pipe connections for PN to 63 MPa (to 630 kgf/sq sm). General specifications

GOST 16295-2018: Anticorrosive paper. Specifications

GOST 16483.15-72: Wood. Determination method of water tightness

GOST 17006-80: Diamond cylinder wheels

GOST 17305-91: Wire of carbon construction steel

GOST 17335-79: Positive displacement pumps

GOST 17479.4-87: Industrial oils

GOST 18160-72: Fasteners. Packing. Marking. Transportation and storage

GOST 18335-83: Enamel НЦ-184. Specifications

GOST 18491-90: Spectacle frames for corrective eye glasses

GOST 18898-89: Powder products. Methods for determination of density, oil content and porosity

GOST 18995.4-73: Organic chemical products. Methods for determination of melting point interval

GOST 19930-91: Sewing domestic machines. General specifications

GOST 20421-75: Grease ВНИИ НП-242. Specifications

GOST 21427.4-78: Cold-rolled steel electrical anisotropic strip

GOST 21694-82: Welding mechanical equipment. General technical requirements

GOST 21824-76: Enamels Xc-119 And Xc-119e Specifications

GOST 21987-76: Commercial explosives. Granulites. Specifications

GOST 21996-76: Cold-rolled heat treated steel-cord belt

GOST 21997-76: Steel flattened strip of high strength

GOST 22356-77: High strength bolts and nuts аnd washes. General specifications

GOST 22661-77: Grapples for containers with a gross weight of 3.0, 5.0, and 6.0 metric tons

GOST 22786-77: Bimetallic weldless tubes for shipbuilding

GOST 2283-79: Cold-rolled tape made of tool steel and spring steel

GOST 2284-79: Cold-rolled carbon structural steel strip

GOST 23.204-78: Products wear resistance assurance. A method of assessment of the surface wearing ability in friction

GOST 23.220-84: Products wear resistance assurance. Evaluation method of abrasive ability of re-established shafts surfaces

GOST 23.221-84: Products weak resistance assurance. Experimental evaluation of lubricants temperature stability at friction

GOST 23.224-86: Products wear resistance assurance. Re-established machine parts. Experimental evaluation of wear resistance ability

GOST 23216-78: Electrotechnical products. Storage, transportation, temporary corrosion protection and packing. General requirements and test methods

GOST 23522-79: Cold-rolled strip for hack saws. Specifications

GOST 24303-80: Kitchen cookware, made of the ferrous and nonferrous metals

GOST 25945-98: Building polymer sealing non-hardening materials and products. Test methods

GOST 26191-84: Oils, lubricants and special fluids. Limited list and order of application

GOST 26614-85: Powder antifriction materials. Test method for determination of tribotechnical properties

GOST 26917-2000: Underground loading machines. General technical requirements and test methods

GOST 27002-86: Cooking utensils from corrosion-resistant steel

GOST 2748-77: Hard rubber plates, rods and tubes for electrotechnical purposes. Specifications

GOST 28281-89: Side milling cutter for cutting of sprocket teeth for driving roller and sleeve-type chains

GOST 28408-89: Manual hoists and trolleys. General specifications

GOST 285-69: Monobasic corrugated barbed wire

GOST 31.121.42-84: Elements and assemblies of universal built-up and re-adjustable equipment for metal-cutting machines

GOST 31559-2012: Anchor supports. General pecifications

GOST 31589-2012: Ophthalmic optics. Spectacle frames for corrective eyeglasses. General technical requirements and test methods

GOST 31624-2012: Special alloy wire for connecting load-bearing and implanted members of products for organism's bones. General specifications

GOST 31625-2012: Special alloy strip and wire for connecting and implanted members of products for cardiovascular surgery. General specifications

GOST 31832-2012: Well sucker rod pump drives. General technical requirements

GOST 31835-2012: Well sucker-rod pumps. General technical requirements

GOST 31945-2012: Flexible cables and cords for underground and open mining operations. General specifications

GOST 31971-2013: Automobile engines. Timing chain tensioners. Technical requirements and test methods

GOST 32707-2014: Automobile roads of general use. Mineral powder. Method for determination of swelling samples from a mixture of powder with bitumen

GOST 32766-2014: Automobile roads of general use. Mineral powder. Method of definition of the indicator characterizes the quantity of oil

GOST 3282-74: General-purpose low-carbon steel wire. Specifications

GOST 33164.1-2014: Mining equipment. Longwall powered roof shocks. Section of support. General specifications

GOST 33368-2015: Oil and oil products trunk pipeline transportation. Filters. General technical specifications

GOST 33950-2016: Pyrotechnic products. Test methods

GOST 3559-75: Steel band for armoring cables

GOST 3560-73: Sealing tepe

GOST 3875-83: Steel card wire

GOST 4640-93: Mineral wool. Specifications

GOST 5005-82: Electric-welded cold-worked steel pipes for cardan shafts

GOST 5006-83: Toothed clutches. Specifications

GOST 503-81: Cold-rolled low-carbon steel strip. Specifications

GOST 5336-80: Single woven steel grids

GOST 5437-85: Reed wire

GOST 6247-79: Steel welded barrels with rolling hoops on the shell

GOST 6599-76: Technical dinitronaphthalene. Specifications

GOST 6631-74: Enamels НЦ-132. Specifications

GOST 6678-72: Rubber sealing cups for pneumatic apparatus. Specifications

GOST 7480-73: Polygraphic wire

GOST 7566-2018: Metal product. Rules of acceptance, marking, packing, transportation and storage

GOST 7566-94: Metal products

GOST 8.305-78: State system for ensuring the uniformity of measurements. Manometric thermometers. Methods and means of calibration

GOST 808-70: Flattened steel strip for spiral rollers of bearings

GOST 8851-75: Steel strip of grades 11kp and 11yua

GOST 9.305-84: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Technological process operations for coating production

GOST 9.403-80: Unified system of corrosion and ageing protection. Paint coatings. Test methods for resistance to liquid static effect

GOST 9206-80: Diamond powders

GOST 926-82: Enamels ПФ-133. Specifications

GOST 9324-2015: Worm-type complete fine milling cutters for cylindrical gears with involute profile. Specification

GOST 9539-72: Thread rolls. Specifications

GOST 9569-2006: Paraffined paper. Specifications

GOST R 50895-96: Toothed clutches. Specifications

GOST R 51015-97: Blades for household and special use. General specifications

GOST R 51271-99: Pyrotechnic goods. Methods of tests

GOST R 51396-99: Special alloy wire for connecting load-bearing and implanted members of products for organism's bones. General specifications

GOST R 51397-99: Special alloy strip and wire for connecting and implanted members of products for cardiovascular surgery. General specifications

GOST R 51896-2002: Well sucker-rod pumps. General technical requirements

GOST R 51932-2002: Ophthalmic optics. Spectacle frames for corrective eyeglasses. General technical requirements and test methods

GOST R 52035-2003: Commercial explosives. Detonite M. Specifications

GOST R 52042-2003: Anchor supports. General specifications

GOST R 52129-2003: Mineral powders for asphaltic concrete and organomineral mixtures. Specifications

GOST R 52203-2004: Tubing and coupling. Specifications

GOST R 52372-2005: Flexible cables and cords for underground and open mining operations. General specifications

GOST R 52768-2007: Centrifuges for industries working with radioactive media. General technical requirements and test methods

GOST R 53322-2009: Pyrotechnic products for domestic use. Fire safety requirements. Test methods

GOST R 53676-2009: Filters for the trunk oil pipelines. General requirements

GOST R 55019-2012: Pipeline valves. Multiplayer metal bellows. General specifications

GOST R 55162-2012: Mining equipment. Pneumatic hammers. Safety requirements and test methods

GOST R 56666-2015: Technical diagnostics. Acoustic method of diagnostics and evaluation a residual resource of side frames trucks wagons. General requirements

GOST R 56667-2015: Technical diagnostics. Acoustic method for assessing conditions of high-speed wagons. General requirements

GOST R 56830-2015: Petroleum and natural gas industries. Electrical submersible pump units. General technical requirements

GOST R 56946-2016: Petroleum and natural gas industries. Drilling fluid materials. Specifications and tests

GOST R 57283-2016: Calculation and strength testing. Acoustic method for determination of damage under thermocyclic fatigue of steel. General requirements

GOST R 57284-2016: Calculation and strength testing. Acoustic method for determination of damage under low-cycle fatigue of steel. General requirements

Manual: Manual for impulse and low consumption fire extinguishing systems

MI 2591-2000: Recommendation. State system for ensuring uniformity of measurements. Density transducers in-line firms "Те sоlа-Тrоon eleсТонісорор ЛТD" (United Kingdom). Method of verification

MI 3001-2006: Recommendation. State system for ensuring uniformity of measurements. Fluid density and viscosity converters in-line models 7827 and 7829 from Solartron Mobrey Limited. Dynamic mode calibration technique

MI 3029-2007: State system for ensuring uniformity of measurements. Viscometers of the firm "Sol-Mon Money Limited". Method of verification

MI 3120-2008: Recommendation. State system for ensuring uniformity of measurements. Fluid density and viscosity converters measuring models 7827 and 7829. Method of calibration

MI 3121-2008: Recommendation. State system for ensuring uniformity of measurements. Fluid density and viscosity converters measuring models 7827 and 7829. Calibration method

MI 3302-2010: Recommendation. State system for ensuring uniformity of measurements. Fluid density and viscosity converters measuring models 7827 and 7829. Calibration method

NPB 255-99: Products pyrotechnics household. The requirements of fire safety. Methods of tests

ODM 218.2.003-2007: Recommendations for the use of polymer-bitumen binders based on SBS-type block copolymers in the construction and reconstruction of roads

ODM 218.3.007-2011: Rationing of the properties of organic binders depending on climatic conditions and operating conditions of coatings

ODM 218.3.026-2012: Recommendations for the use of high-density asphalt concrete based on polymer-bitumen binders for road pavements in different climatic conditions of the Russian Federation

ODM 218.5.007-2016: Guidelines for determining the modulus of elasticity of a static stamp

ODM 218.5.008-2008: Methodical recommendations on the use of a crack-interrupting layer when constructing road pavements with a polymer-asphalt-concrete coating (for experimental implementation)

OST 218.010-98: Cementing polymer-bitumen road coating on the basis of block copolymers such as SBS. Specifications

OST 26-07-596-72: Electric drives for pipeline fittings. Export including tropical climate countries. General requirements.

RD 153-39-019-97: Methodical instructions for determining the technological losses of oil at the enterprises of oil companies of the Russian Federation

RD 24.203.03-90: Radii and angles of gib pipes

RD 31.2.07-2001: Fuels, oils, lubricants and special liquids for ships of sea transport. Nomenclature and scope

RD 31.27.03-95: Fuels, oils, lubricants and special liquids for ships of sea transport. Nomenclature and scope

RD 34.24.501-96: Type operation manual for operation individual coal pulverization systems with ball-tube mills and coal bunker

RD 34.24.502-96: Model Guidelines for Operation of Individual Direct-Injection Fuel Pulverizing Systems with Pulverizing Fans

RD 34.24.504-96: Model Guidelines for Operation of Individual Closed Fuel Pulverizing Systems with Hammer Mills

SO 34.23.501-2005: Guidelines for the operation of fuel oil facilities of thermal power plants

SP 70.13330.2012: Bearing and enclosing structures. Updated living edition of SNiP 3.03.01-87

ST RK 2609-2015: Explosive industrial substances. Grammonite of grades t-5, t-10, t-15. Specifications.

ST RK 2823-2016: Industrial explosives Poremit-1. Technical conditions

ST TsKBA 059-2008: Pipe fittings. Antifriction grease. Scope, application rates and application methods

ST TsKBA 059-2018: Pipe fittings. Antifriction grease. Scope, application rates and application methods

ST TsKBA 087-2010: Pipe fittings. Electric drives. General technical conditions

STB 2106-2010: Pyrotechnic articles. Test methods

TR 103-07: Technical recommendations for the construction of road structures using asphalt concrete

TU 16.K73.05-93: Flexible power cables for voltage of 660 V. Specifications

TU 2311-042-21743165-2005: Varnish "Yarly" V-PL-1120. Technical conditions

TU 2312-075-21743165-2005: Enamel "YARLI" V-MA-1232. Technical conditions

TU 34-38-20395-95: Fans VDN-32B, VDN-28, VDN-26, VDN-24, VDN-22, VDN-20, VDN-18. Technical conditions for major repairs

VNTP 5-95: Norms of technological design of enterprises for provisioning with petroleum products (petroleum storage depots)

GOST 12.4.165-2019: Occupational safety standards system. Personal Protective Equipment Special shoes with leather upper. Method for determining the coefficient of reduction in the strength of fastening from exposure to aggressive environments

GOST 24334-2020: Power cables for non-stationary laying. General technical requirements

GOST 34568-2019: The main pipeline transport of oil and oil products. Cameras for starting and receiving cleaning and diagnostic tools. General specifications

GOST 34587-2019: Hoisting cranes. Metal constructions. Manufacturing requirements

GOST 34595-2019: Mining engineering. Pneumatic impulse cartridges. General technical requirements. Test methods

GOST R 58621-2019: The main pipeline transport of oil and oil products. Hose of a high pressure. General specifications

RD 27.05.01-2017: Guidance document for the repair and maintenance of wheelsets with axleboxes for freight cars of 1520 (1524) mm track gauge main railways

RD 31.55.08.01-89: Iron casting. Materials charge and auxiliary. Consumption rates

TU 24.08.1144-79: Car Decker 12U6

Customers Who Viewed This Item Also Viewed:

Electromagnetic compatibility of technical equipment. Immunity of equipment for general lighting purposes to electromagnetic disturbance. Requirements and test methods
Language: English
Price: $218.25
Unified system for design documentation. Exploitative documents
Language: English
Price: $150.48
Еlectromagnetic compatibility of technical equipment. Harmonic current emissions (equipment input current <= 16 A per phase). Limits and test methods
Language: English
Price: $410.31
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
Language: English
Price: $714.89
Еlectromagnetic compatibility of technical equipment. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems. Equipment with rated current <= 16 A and not subject to conditional connection. Limits and test methods
Language: English
Price: $359.87
Pipeline valves. General safety requirements
Language: English
Price: $213.84
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
Conformity assessment system for the use of nuclear energy. Personnel in the non-destructive and destructive testing of metal. Requirements and qualification procedure Дата введения в действие 15.03.2018
Language: English
Price: $207.90
State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
Language: English
Price: $121.77
Unified system of corrosion and ageing protection. Paint coatings. Groups of operation conditions
Language: English
Price: $158.40
Atom stations. Equipment, instruments, means of monitoring and control systems. General technical requirements
Language: English
Price: $1,146.54
System of design documents for construction. Basic requirements for design and working documentation
Language: English
Price: $867.18
Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
Language: English
Price: $212.85
Non-destructive Testing. Welded Joints. Ultrasonic Methods
Language: English
Price: $140.58
Compilation and execution of safety data sheet of chemical products
Language: English
Price: $175.23
Cable products for nuclear power plants. Technical requirements of the operating organization
Language: English
Price: $449.11
Rolling stock of railways. Springs cylindrical screw. Certification requirements
Language: English
Price: $175.65
Loads and actions
Language: English
Price: $495.00
Technical Regulations of the Eurasian Economic Union "On Restriction of the Use of Hazardous Substances in Electrical and Radioelectronic Products"
Language: English
Price: $83.16
Degrees of protection provided by enclosures (IP Code)
Language: English
Price: $195.03

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!