GOST 25129-82
ГОСТ 25129-82
|
|
Primer GF-031. Specifications
Грунтовка ГФ-021 Технические условия
Status: Effective. The limitation of the effectiveness period has been lifted: Protocol No. 4-93 of the IGU dated 10.21.93 (IUS 4-1994)
The standard applies to the primer GF-021, which is a suspension of pigments and fillers in alkyd varnish with the addition of solvents, desiccant and stabilizing substances. The primer is intended for priming metal and wood surfaces for coating various enamels.
Стандарт распространяется на грунтовку ГФ-021, представляющую собой суспензию пигментов и наполнителей в алкидном лаке с добавлением растворителей, сиккатива и стабилизирующих веществ. Грунтовка предназначается для грунтования металлических и деревянных поверхностей под покрытия различными эмалями.
Choose Language:
Format: Electronic (pdf/doc)
Approved: USSR State Committee for Standards,
2/10/1982
SKU: RUSS18368
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
87 Paint and varnish industry »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.9 Testing and control of chemical and industrial products »
4.9.3 Products of paint and varnish industry »
ISO classifier »
87 PAINT AND VARNISHING INDUSTRY »
87.040 Paints and varnishes »
National standards »
87 PAINT AND VARNISHING INDUSTRY »
87.040 Paints and varnishes »
National Standards for KGS (State Standards Classification) »
Latest edition »
L Chemical products and rubber-asbestos products »
L2 Organic Chemical Products »
L25 Organic solvents, drying oils, primers »
The Document is Replaced With:
GOST 25129-2020: Primer GF-021. Specifications
The Document References:
GOST 10054-82: Water-resistant abrasive paper
GOST 10214-78: Petroleum solvent. Specifications
GOST 12.1.007-76: Noxious substances. Classification and general safety requirements
GOST 12.3.005-75: Painting works
GOST 12.4.011-89: Occupational safety standards system. Means of protection. General requirements and classification
GOST 14192-96: Cargo marking
GOST 15140-78: Paintwork materials. Methods for determination of adhesion
GOST 16523-97: Rolled sheets from quality and ordinary carbon steel for general purposes. Specifications
GOST 17.2.3.02-78: Regulations for establishing permissible emissions of noxious pollutants from industrial enterprises
GOST 17537-72: Paint materials. Methods for the determination of the content of volatile and non-volatile matters, hard and film-forming materials
GOST 1770-74: Laboratory volumetric glassware. Cylinders, beakers, measuring flasks, test tubes. General specifications
GOST 18187-72: Solvents of РЭ type for electrocoating. Specifications
GOST 19007-73: Paintwork materials. Method for determination of drying time and degree
GOST 1928-79: Coal solvent. Specifications
GOST 19433-88: Dangerous goods. Classification and marking
GOST 3134-78: White spirit
GOST 4765-73: Pain and lacquer materials. Method of determination impact resistance
GOST 5233-89: Paint materials. Method for determination of coating hardness pendulum instrument
GOST 5406-84: Enamels НЦ-25. Specifications
GOST 6456-82: Abrasive paper
GOST 6589-74: Paintwork materials. Method for determination of grind degree by grindmeter 'Klin'
GOST 6613-86: Square meshed woven wire gauzes
GOST 6806-73: Paint and lacquer materials. Method for determination of film elasticity in bending
GOST 8420-74: Paint and lacquer materials. Method for determination of relative viscosity
GOST 8832-76: Paintwork materials. Methods for formation of paint coating for testing
GOST 9.403-80: Unified system of corrosion and ageing protection. Paint coatings. Test methods for resistance to liquid static effect
GOST 9198-83: Enamels of types НЦ-11 and НЦ-11А. Specifications
GOST 9410-78: Petroleum xylol. Specifications
GOST 9949-76: Coal xylene. Specifications
GOST 9980.1-86: Paint materials. Rules of acceptance
GOST 9980.2-86: Paint materials. Test sampling
GOST 9980.3-86: Paint materials. Packing
GOST 9980.4-2002: Paint materials. Marking
GOST 9980.4-86: Paint materials. Marking
GOST 9980.5-86: Paint materials. Transportation and storage
The Document is Referenced By:
GOST 10277-90: Putties. Specifications
GOST 12549-80: Passenger cars of mainline railways track 1520(1524) mm gauge. Painting. Technical requirements
GOST 13781.3-79: Couplings of for power cables with paper insulation for 20 and 35 kV Sets of parts and installation materials. Specification
GOST 16561-76: Metal accessories for wood containers. Specifications
GOST 18335-83: Enamel НЦ-184. Specifications
GOST 21519-84: Windows, balcony doors, shop-windows and stained glass panels of aluminum alloys
GOST 22133-86: Paint and varnish coatings of metal-cutting, press-forging, foundry and wood-working equipment
GOST 22419-77: Universal platforms for railroad with gauge of 750 mm. Specification
GOST 22896-77: Paint coatings for electric locomotives of 1520 mm gauge main line railways. Specifications
GOST 22947-78: Paint coatings for diesel locomotives of 1520 mm gauge main line railways. Specifications
GOST 2361-74: Limiters for cases flap covers. Specifications
GOST 23852-79: Coatings of lacquers and paints. General requirements for choice by decorative properties
GOST 25483-95: Garden watering pots
GOST 27590-2005: House-tube water-watered heat supply systems. General specifications
GOST 27590-88: Water heaters for heat supply systems
GOST 28433-90: Retrievers
GOST 28434-90: Overhead travelling stacker cranes
GOST 28613-90: Paint coatings of bicycles, motor cycles, scooters, motor bicycles. General requirements and methods of control
GOST 3.1127-93: The unified system of technological documentation. General rules for drawing up of textual technological documents
GOST 31.0101.01-89: Hand wheels, rotating levers, handles, and knobs
GOST 31311-2005: Heating devices. General specifications
GOST 34059-2017: Internal buildings and structures utilities. Arrangement of heating, heating and cooling water supply systems. General technical requirements
GOST 5973-91: Dump cars for 1520 mm railway gauge. General specifications
GOST 7409-90: Main line freight cars for 1520 mm gauge. Specifications for the development of paint coating technologies
GOST 7462-73: Enamels НЦ-5123. Specifications
GOST 8690-94: Cast iron heating radiators. Specifications
GOST 9.074-77: Unified corrosion and ageing protection system. Coatings for paintwork intended for use in areas with moderate climate. General technical requirements and methods of accelerated testing
GOST 9.401-2018: Unified system of corrosion and ageing protection. Paint coatings. General requirements and methods of accelerated tests on resistance to the influence of climatic factors
GOST 9.401-91: Unified system of corrosion and ageing protection. Paint coatings. General requirements and methods of accelerated tests on resistance to the action of climatic factors.
GOST 9754-76: Enamels MЛ-12 type. Specifications
GOST R 52151-2003: Pile driving diesel hammers. Covers. General specifications
GOST R 55779-2013: Cases of cumulative punches. Technical conditions
GOST R 56064-2014: Safety of attractions. Capital repair of attractions. Procedure
GOST R 58351-2019: General automobile roads. Frontal road fences, holding lateral combined and holding pedestrian. General technical requirements. Testing and control methods. Application rules
GOST R 58620-2019: The main pipeline transport of oil and oil products. Tank equipment. Acceptance devices for tanks. General specifications
IM 4-12-95: Automation systems. Handbook of materials. Part 1. Basic materials
Letter 15153/05-DG: About the application of the standards
NPB 151-2000: Fire-fighting cabinet. Technical requirements of fire safety. Test methods
NPB 151-96: Complete set of fire crane. General technical requirements. Test Methods
NTP 10-12977-2000: Standards of technological design of enterprises of the alcoholic beverage industry
NTP-APK 1.20.11.001-04: Standards of technological design of enterprises of the yeast industry
ODM 218.2.001-2009: Recommendations for the design and construction of culverts of metal corrugated structures on public roads, taking into account regional conditions (road-climatic zones)
OST 26.260.18-2004: Process modules for oil and gas industry. General technical specifications
OST 26.260.758-2003: Metal structures. General technical requirements.
OST 26-04-2384-79: Transportation plugs for working P 0 MPa (0 kg/cm2). Design and dimensions.
OST 26-04-2386-79: Lugged transportation plugs for working P 0 MPa (0 kg/cm2). Design and dimensions.
OST 35-09-86: Hoisting machinery and equipment. General specifications.
OST 36-62-81: Hoisting equipment. General technical requirements.
OST 36-78-83: Steel building constructions. Requirements for delivery to export
PB 03-381-00: Regulations of installation of vertical cylindrical steel reservoirs (steel scroll tanks) for petroleum and petroleum products
Protocol 03-14-PR: Meeting of the Working Group on making decisions on the possibility of using national and interstate standards developed on the basis of (instead of) previously valid, to ensure the activities of the Federal Accreditation Service (Rosakkreditatsiya) on accreditation and competence verification of accredited persons of April 29, 2022 N 03-14-pr
RD 153-34.1-03.357-00: Recommended Practice for Improving Fire Safety of Roll Roofing on Main Buildings of In-Service Thermal Power Stations
RD 302-07-16-91: General purpose pipeline valves. Paint coatings. General technical conditions
RD 31.44.05-80: Crane metalwork. Repairs. Technical specifications
RD 34.35.514-85: Operating Instructions for Surge Protectors
RD 34.35.606: General Guide to Overhaul of Thermal Automation and Measuring Equipment
RD 36-62-00: Hoisting equipment. General technical requirements.
RD 39-30-1333-85: Guidelines for corrosion protection by coatings on the outer surface of field pipelines in permafrost areas in Western Siberia
Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope
RM 38.14.008-94: Guiding Material. Radial (centrifugal) and axial fans. Maintenance and repair.
RM 4-150-92: Process automation systems. Integrated norms of consumption of materials and products
RM 4-206-95: Automation systems. Specification of equipment, products and materials. Directions for implementation. Allowance to GOST 21.110-95
RM 4-246-91: Automation systems. General requirements for CAD
SNiP 2.03.11-85: Corrosion protection of buildings structures
SO 153-34.03.357-2003: Recommendations for improving fire safety roofing coatings of the main buildings of operating thermal power plants
ST TsKBA 079-2010: General purpose pipeline valves. Paint coatings. General technical conditions
TU 102-416-86: Garage reinforced concrete prefabricated for individual use
TU 102-461-88: Garage reinforced concrete prefabricated box single and double row collective use
TU 102-541-89: Garage assembly individual use of ash and slag concrete
TU 102-84.3-87: Garage reinforced concrete prefabricated box with two floors for collective use
TU 26-01-949-85: The devices gummed with the mechanical mixing device of volume 1; 2; 3.2; 6.3; 10 and 16 m3
TU 26-01-957-85: Gummed capacitive devices
TU 26-02-1102-89: Shell and tube heat exchangers of increased thermal efficiency with an expander on the housing
TU 26-02-1162-95: Shell and tube heat exchangers for elevated temperatures and pressures with a floating head and a compensator on it. Technical conditions
TU 3113-028-00220302-01: Heaters of steam and water-to-water for heating networks of heating and hot water systems. Technical conditions
TU 3612-023-00220302-01: Shell-and-tube heat exchangers with a floating head, shell-and-tube with U-tubes and tube bundles for them
TU 3612-024-00220302-02: Shell and tube heat exchangers with fixed tube sheets and shell and tube with temperature compensator on the shell
TU 3612-100-00220302-2005: Shell and tube heat exchangers, tube bundles for them and heat exchangers "pipe in pipe". General technical conditions
TU 36-1395905-015-95: A set of structures of buildings of arched type. Technical conditions
TU 36-26-11-4-89: Steel building construction, vertical cylindrical tanks for oil and petroleum products with a volume of 100 to 50,000 m3. Technical conditions
TU 3644-006-00220302-99: Shell-and-tube heat exchangers for special purposes. Refrigeration evaporators and condensers
TU 4112-091-00220302-2005: Steel castings for equipment of oil refineries and petrochemical plants
TU 4834-020-01297858-2006: P1 Welded Composite Coupling
TU 5210-001-25432924-2008: Fences, road, metal, barrier type
TU 5216-001-05765820-2007: Roadside restraints for automobiles, side, first, metal type
TU 5216-006-44884945-2006: Barrier retaining barriers for cars, side in unilateral and bilateral execution of the pavement and road groups
TU 5216-007-44884945-2006: Fencing road restraints for cars, the first type, groups 11Д and 11ДД
TU 5216-063-01393697-2006: Road and bridge fences for automobiles, side, first type, metal
TU 5764-011-01297858-99: Steel pipes with thermal insulation from polyurethane foam. Technical conditions
TU 576431-009-01297858-99: Pipeline elements with polyurethane foam insulation. Technical conditions
VNTP 04-94: Engineering Design Standards for Wine Bottling Plants
VNTP 10M-93: Engineering Design Standards for Microbreweries
VNTP 11-93: Engineering Design Standards for Facilities for the Production of Barley Brewer's Malt
VNTP 26-94: Standards for technological design of sparkling wine factories (production of Soviet champagne using a continuous tank method)
VNTP 34-93: Engineering Design Standards for Alcohol Industry Facilities
VNTP 35-93: Engineering Design Standards for Alcoholic Beverage Plants/Distilleries
VSN 279-85: Guidelines for Sealing Joints in Ventilating and Plumbing Systems
VSN 362-87: Disinfections and Etching of Pipelines
VSN 426-86: Specified Quantity Allowances for Paints, Coatings, and Auxiliary Materials Used in Fabrication of Structural Steel for Buildings and Structures
VSN 446-84: Guidelines for Use of Paints and Coatings for Factory-Applied Corrosion Protection of Structural Steel
VSN 447-84: Specified Quantity Allowances for Paints, Coatings, and Auxiliary Materials Used for In-Field Painting of Structural Steel
|
Customers Who Viewed This Item Also Viewed:
 |
Industrial process measurement and control equipment. Reliability. General requirements and test methods
Language: English |
Gauged corrosion-resistant, heat-resistant and high-temperature steel shape
Language: English |
System for ensuring the reliability and safety of construction sites. Loads and impacts. design standards
Language: English |
Heating, ventilation and air conditioning. Fire Safety Requirements
Language: English |
Reliability of atomic power stations and their equipment. General statements and reliability index nomenclature
Language: English |
Electromagnetic compatibility of technical equipment. Technical equipment for nuclear power plants. Requirement and test methods
Language: English |
Billets made of corrosion-resistant steels of 12Х18Н9Т, 12Х18Н10Т, 08Х18Н10Т, 10Х17Н13М2Т, 12Х18Н12Т and 03Х21Н32М3Б types.
Language: English |
Dependability in technics. Terms and definitions
Language: English |
System of products development and launching into manufacture. Technical assignment. Requirements to contents and form of presentation
Language: English |
Reliability in technology. Composition and general rules for setting reliability requirements
Language: English |
Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications
Language: English |
Natural gas for industrial and municipal purposes. Technical conditions
Language: English |
Global navigation satellite system. Emergency response system in case of accidents. Test methods for emergency services call device/system for compliance with the requirements for the quality of loudspeaker communication in the vehicle cab.
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
