SNiP 3.05.07-85
СНиП 3.05.07-85
|
|
Automated systems
Системы автоматизации
Status: Not effective - Not applicable. Order of the Ministry of Construction of Russia No. 727
Standards and regulations apply to the production and acceptance of work on installation and commissioning of automation systems (control, management and automatic control) of technological processes and engineering equipment for the construction of new, expansion, reconstruction and technical re-equipment of existing enterprises, buildings and structures of national economy sectors
Нормы и правила распространяются на производство и приемку работ по монтажу и наладке систем автоматизации (контроля, управления и автоматического регулирования) технологических процессов и инженерного оборудования на строительстве новых, расширении, реконструкции и техническом перевооружении действующих предприятий, зданий и сооружений отраслей народного хозяйства
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstroy of the USSR (State Committee of the Council of Ministers of the USSR for Construction),
10/18/1985
SKU: RUSS18435
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
4. Normative documents for engineering equipment of buildings and structures and external networks »
k.41 Heat supply, heating, ventilation and air conditioning »
Welding regulations »
Welding work »
Welding regulations »
Pipelines »
Welding regulations »
Metal structures »
Welding regulations »
Welding materials »
Welding regulations »
Documentation »
Welding regulations »
Non-destructive control »
Welding regulations »
Defects »
Welding regulations »
Welding work »
Soldering »
Welding regulations »
Welding materials »
Gases »
PromExpert »
SECTION I. TECHNICAL REGULATION »
III Quality »
2 Product quality assurance »
2.3 Quality Management »
2.3.1 Fundamentals of quality management »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.140 Installations in buildings »
91.140.01 Engineering equipment of buildings in general »
The Document is Replaced With:
SP 77.13330.2016: Systems of automation.
As a Replacement Of:
SNiP III-34-74: Automation Systems
The Document References:
GOST 10434-82: Electric contact connections. Classification. General technical requirements
GOST 12.2.060-81: Acetylene pipelines
GOST 16037-80: Welded joints in steel pipelines. Main types, design elements and dimensions
GOST 18475-82: Cold-worked aluminum and aluminum alloy pipes
GOST 18599-83: Polyethylene pressure pipes
GOST 19104-79: Low-frequency voltage up to 1500 V cylindrical connectors. Basic parameters and dimensions
GOST 19249-73: Brazing and soldering joints. Main types and parameters
GOST 23517-79: Low frequency and combined rectangular connectors of up to 1,500 V. Basic parameters and dimensions
GOST 25154-82: Terminal contact blocks with flat terminals. Design, main parameters and dimensions
GOST 25164-82: Connections of SSI instruments and devices with external hydraulic and gas lines. Types, basic parameters and dimensions. Technical requirements
GOST 25165-82: Connections of SSI instruments and devices with external pneumatic lines. Types, basic parameters and dimensions. Technical requirements
GOST 25705-83: Clamps, contact type, with female terminals. Design, main parameters and dimensions
GOST 3262-75: Water-supply and gas-supply steel pipes Technical conditions
GOST 5496-78: Rubber technical tubes. Specifications
GOST 617-72: Copper pipes. Specification
GOST 8734-75: Seamless steel tubes cold deformed. Range
GOST 9941-81: Seamless cold- and warm-deformed tubes made from corrosion-resistant steel
OST 26-04-312-83: Degreasing methods. General requirements for technological process.
OST 36-13-76: Boards and control panels of automation systems of technological process. General technical requirements
OST 36-39-80: Steel technological pipelines made of carbon and alloy steels for pressure Ру up to 9.81 MPa (100 kgf / cm2). Shielded manual metal arc welding. Typical technological process.
OST 36-57-81: Steel technological pipelines made of carbon and alloy steels for pressure Ру up to 9.81 MPa (100 kgf / cm2). Manual argon arc welding. Typical technological process.
PBVHP-74: Safety rules in explosive and explosive chemical and petrochemical industries
PUG 69: Regulations for the Design and Safe Operation of Pipelines for Combustible, Toxic and Liquefied Gases
SN 202-81: Instructions on the composition, procedure for the development, coordination and approval of projects and estimates for the construction of enterprises, buildings and structures
SN 527-80: Instructions on Designing of Steel Process Piping, Рnom up to 10 MPa
SNiP 3.05.05-84: Processing equipment and process pipelines
SNiP 3.05.06-85: Electrical devices
SNiP III-34-74: Automation Systems
SNiP III-3-81: Acceptance of completed construction projects. Main provisions
VSN 10-83/Minhimprom: Instruction on designing of oxygen gas pipelines
VSN 281-75: Interim guidelines for the design of process automation systems
The Document is Referenced By:
GOST 12.2.007.9-93: Electric heating equipment safety
GOST 30331.1-95: Electrical installations of buildings. General
GOST R 50571.1-93: Electrical installations of buildings. General
GOST R 50776-95: Alarm systems. Part 1. General requirements. Section 4. Code of practice
GOST R 53704-2009: Complex and integrated security systems. General technical requirements
GOST R 53705-2009: Complex security systems. Stationary metal detectors for apartments. General technical requirements. Test methods
GOST R 54892-2012: Installation of air separation plants and other cryogenic equipment. General provisions
GOST R 54906-2012: Complex security systems. Environmental security and ecological safety guaranteed design. General technical requirements
GOST R 56019-2014: Gas distribution systems. Gas pressure regulating stations. Functional requirements
GOST R 56936-2016: Production services. Technical safety systems. Stages of the systems life cycle. General requirements
GOST R 70379-2022: Trunk pipeline transport of oil and petroleum products. Oil and petroleum products vapor recovery unit of combined (adsorption-absorption) type. Technical specifications
GOST R 70524-2022: Land reclamation systems and structures. Rules of acceptance into operation
IM 14-51-00: Guidelines and explanations on topical issues of creating automation systems. Release 4. New standard drawings of the Montazhavtomatika association
IM 14-51-94, v.2: Guidelines and explanations on topical issues of development of automation systems. Release 2. General questions of application of standard drawings
IM 14-55-97: Automation systems for small heating boilers
IM 14-58-2009: Index of typical drawings and normals for use in the design and installation of automation systems
IM 14-58-2012: Reference book of standard drawings and normals used in the design and installation of automation systems
IM 4-12-95: Automation systems. Handbook of materials. Part 1. Basic materials
IN 4-7-92: Index of regulatory and technical documents (as of 01.03.92)
ITP 31-87: Instructions for the technological design of enterprises for the production of perfumery products
Manual: Manual for impulse and low consumption fire extinguishing systems
Manual for RD 78.145-93: Manual for the guiding document "Systems and complexes of security, fire and security-fire alarms. Rules for the production and acceptance of work"
MDK 2-04.2004: Methodological manual for the maintenance and repair of housing
MI 2775-2002: Recommendation. State system for ensuring uniformity of measurements. The order of metrological and technical support of industrial operation of measurement systems of quantity and quality indicators of oil, pipe piston calibration units and measuring ins
MI 3212-2009: State system for ensuring uniformity of measurements. Consumption and quantity of natural gas. Measurement technique for determining the tightness of impulse lines of pines (pneumatic systems for measuring pressure drop and pressure) according to GOST 8.586. (1-5) -2005 measuring systems with restricting devices
MR 14-02-2003: Selection and application of selective devices for pressure measuring instruments
NPB 56-96: Automatic Impulse Dry Chemical Fire Extinguishing Systems. Interim Requirements for Design and Operation
NTP 53-91: Norms of technological design of production of mayonnaise
NTP-APK 1.10.12.001-02: Engineering Design Standards for Facilities for Storage and Processing of Potatoes and Fruit and Vegetable Products
NTPD-90: Norms of technological design of diesel power plants
Order 1112: On Amending Order No. 687 of the Federal Agency for Technical Regulation and Metrology of April 2, 2020
Order 1653: On amending the order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687
OST 26.260.18-2004: Process modules for oil and gas industry. General technical specifications
OST 26-18-5-88: Technological units of gas and oil industry. General technical requirements.
OST 64-02-003-2002: Products of the medical industry. Technological regulations of production. Content, procedure of development, coordination and approval
OTT 1.1.3.10.1446-2018: Atom stations. Control systems important to safety. Creation, modernization and operation. General technical requirements
PB 08-83-95: Requirements for the Organization and Safe Operation of Underground Storage Facilities for Natural Gas in Salt Deposits
PB 11-401-01: Safety regulations for gas-handling facilities of metallurgic and coke-chemical industries and enterprises
POT R O 97300-12-97: Labor protection regulations in the beer and non-alcoholic food industry
POT R O-00-97: Occupational Safety and Health Requirements in the Pulp and Paper and Rosin Industry
POT R O-97300-04-95: Rules for labor protection during storage and processing of fruits and vegetables
PPBO-157-90: Fire Safety Regulations in the Timber Industry
R 78.36.004-99: Recommended Practice for Using Fire Alarm Systems to Protect Dwelling Units. Typical Solutions
R 78.36.005-99: Selection and Use of Access Control and Management Systems. Recommended Practice
RD 03-33-95: Guidelines for Supervision of Construction and Installation Practices at Nuclear and Radiation Hazardous Facilities
RD 153-34.0-11.326-00: Method for Measurements of Fuel Oil Flow Rate Using Special Orifice Devices
RD 153-34.0-11.338-97: Method for Measurement of Process Water Pressure in Thermal Power Stations
RD 153-34.0-11.339-97: Methods of measurement of water flow large diameter pipes.
RD 153-34.0-11.344-00: Method for Measurements of Pressure of Steam Released from Heat Sources in Piped Steam Heat Supply Systems
RD 153-34.0-11.345-00: Method for Measurements of Temperature of Steam Released from Heat Sources in Piped Steam Heat Supply Systems
RD 153-34.0-11.347-00: Method for Measurements of Temperature of Heat Transfer Agent in Piping of Piped Hot Water Heat Supply Systems at Heat Source
RD 153-34.0-11.348-00: Method for Measurements of Flow Rate and Quantity of Heat Transfer Agent in Piping of Piped Hot Water Heat Supply Systems at Heat Source
RD 153-34.1-11.313-99: Method for Measurements of Temperature of Reheater Steam in Thermal Power Station Process Equipment
RD 153-34.1-11.318-2000: Methods for measuring the pressure of fresh steam behind the boiler and in front of the turbine stop valves in thermal power plants
RD 153-34.1-11.319-2001: Methods for measuring the temperature of fresh steam behind the boiler and in front of the turbine stop valves in thermal power plants
RD 153-34.1-35.417-2001: Guidelines for setting up automatic regulators of turbine equipment of TPPs
RD 153-34.1-35.503-00: Procedural Guidelines for Adjustment of Process Protective Means for Thermal Energy Equipment of Thermal Power Stations
RD 153-39.4-041-99: Operating rules and regulations for trunk oil product pipelines.
RD 153-39.4-056-00: Main crude pipeline. Operations rules.
RD 210.006-90: Rules for the technological design of nuclear power plants (with VVER reactors)
RD 34.11.314-92: Method for Measurements of Feed Water Flow Rate Downstream of High Pressure Heaters in Thermal Power Stations
RD 34.11.315-92: Method for Measurements of Flow Rate of Natural Gas Supplied to Thermal Power Station Boilers
RD 34.35.412-88: Requirements for Acceptance into Operation from Installation and Adjustment of Thermal Power Station Process Control Systems
RD 34.35.414-91: Organizational Requirements for Startup and Initial Adjusting Operations for Automated Process Control Systems at Thermal Power Stations
RD 34.70.110-92: Rules for the organization of commissioning works at thermal power plants
RM 13-1-94: Start-up and commissioning procedure for measuring instruments and automatic control systems for the combustion processes of steam and hot water boilers
RM 25 951-90: APCS. Tasks for the general designer to design in adjacent parts of the automation project. Part 3. Premises for automated process control systems and automation systems. Cable facilities. Openings and embedded devices
RM 4-132-89: Automation systems. Nomograms and tables for the selection of protective pipes, supporting structures for the design of electrical and pipe wiring
RM 4-206-95: Automation systems. Specification of equipment, products and materials. Directions for implementation. Allowance to GOST 21.110-95
RM 4-234-91: Recommendations for the use of PLAS in process automation systems
RM 4-239-91: Automation systems. Dictionary-reference terms. Allowance to SNiP 3.05.07-85
RM 4-246-91: Automation systems. General requirements for CAD
RM 4-249-91: Process automation systems. Device grounding networks. Allowance for the BCH 205-84/MMSS USSR
RM 4-264-92: Automation systems. Recommendations for the design of steel structures for wiring and installation of automation equipment
RM 4-2-96: Computer-aided design system. Automated systems. Directions for application
RM 4-49-96: Electrical circuits for automatic regulation of technological parameters. Instrumentation and instrument type regulators. Part 5. Devices manufactured by manufacturers of the Russian Federation
RM 4-59-95: Automation systems. Composition, design and completion of working documentation
RM 4-6-92: Process automation systems. Design of electrical and pipe wiring. Part 3. Guidelines for the implementation of the documentation. Allowance for RTM 36.22.7-92
RM 4-87-88: Industrial Automation Systems. Selection of Optimum Conductor Sizes for Communications Lines Used in Pneumatic Automatic Control Systems. Methods and Standards
RM 78.36.001-99: Engineers' and Electricians' Guide to Security Alarm and Fire Alarm Systems
RTM 36.22.13-90: Automation systems. Assembly and technological requirements for design
Rules 00-97: Rules for Occupational Safety and Health in the Pulp and Paper and Forestry Industries (final)
SP 120.13330.2012: Subway systems
SP 32-105-2004: Subways
SP 42-101-2003: The general provision and construction gas distribution sistem from steel and polyethyelene pipes
SP 471.1325800.2019: Building Information Modeling. Quality control of construction works
SP 77.13330.2016: Systems of automation.
STA 25.03.02-2004: Combined security system
STM 14-2-2003: Instruments for measuring and regulating pressure, vacuum. Installation on equipment and construction grounds
STM 14-29-02: Electrical and pipe wiring of automation systems. Posting passes through the building envelope
STM 4-12-90: Devices and auxiliary devices. Installation methods on the facades of shields and consoles. Temperature meters and controllers
STM 4-14-88: Devices and auxiliary devices. Installation methods on the facades of shields and consoles. Electric regulators and signaling devices. Part I
STM 4-14-89: Devices and auxiliary devices. Installation methods on the facades of shields and consoles. Electric regulators and signaling devices. Part 2
STM 4-25-92: Methods of installation of supporting and supporting structures of electrical and pipe wiring. Part 2. Box
STM 4-26-92: Protective pipelines for automation and industrial communications. Part 2. Plastic pipelines
STM 4-4-89: Instruments for measuring and regulating the level. Installation on tanks
STM 4-7-94: Measuring instruments and pressure transducers and differential pressure. Single installation on the floor or wall. Part 1. Pressure gauges
SZK 14-29-02: Electrical and pipe wiring of automation systems. Passages wiring through enclosing building structures. Installation of embedded structures
TU 4218-002-17416124-96: A series of posts, shields and boxes. Technical conditions
TU 4218-008-51216464-01: Selection device. Technical conditions
VNTP 3-90: Engineering Design Standards for Branched Petroleum Product Pipelines
VNTP 52-91: Departmental norms of technological design of warehouses of vegetable oils and fats of oil and fat enterprises
VSN 217-87: Planning and Organization of Construction and Installation Operations Related to the Construction of Boiler Plants
VSN 505-87: Technical requirements (installation) to the engineering of oil refining and petrochemical industry objects with the use of units (automation system)
|
Customers Who Viewed This Item Also Viewed:
 |
Liquid lubricating and plastic materials. Method of test for lubricating properties on four ball machine
Language: English |
Armour clothes. Classification and general technical requirements
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Food products. Methods for detection and quantity determination of coliformes
Language: English |
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English |
Hotels design
Language: English |
Railroad rails. General specifications
Language: English |
Potassium chloride
Language: English |
Controllers acting without
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
