GOST 9.301-86

ГОСТ 9.301-86

Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. General requirements

Единая система защиты от коррозии и старения. Покрытия металлические и неметаллические неорганические. Общие требования

Status: Effective

The standard applies to metallic and non-metallic inorganic coatings obtained by electrochemical, chemical and hot (tin and its alloys) methods, and establishes general requirements for the surface of the base metal and coatings during their production and quality control of the base metal and coatings. The standard does not apply to coatings used as technological sublayers on nickel, nickel-chromium, copper-nickel and copper-nickel-chromic, having only a decorative purpose, and does not take into account changes in coatings that appeared during assembly and testing of products.

Стандарт распространяется на металлические и неметаллические неорганические покрытия, получаемые электрохимическим, химическим и горячим (олово и его сплавы) способами, и устанавливает общие требования к поверхности основного металла и покрытиям в процессе их производства и контролю качества основного металла и пок��ытий. Стандарт не распространяется на покрытия, используемые в качестве технологических подслоев, на никелевые, никелево-хромовые, медно-никелевые и медно-никелево-хромовые, имеющие только декоративное назначение, и не учитывает изменения покрытий, появившиеся при сборке и испытаниях изделий.

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 16

Approved: USSR State Committee for Standards, 2/27/1986

SKU: RUSS18445

Price: $82.17




The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 25 Mechanical Engineering »

Welding regulations » Welding work »

Welding regulations » Main materials »

Welding regulations » Welding materials »

Welding regulations » Documentation »

Welding regulations » Mechanical Testing »

Welding regulations » Heat treatment »

Welding regulations » Defects »

Welding regulations » Welding work » Soldering »

Welding regulations » Welding work » Dusting »

Welding regulations » Main materials » Steel, cast iron »

Welding regulations » Main materials » Non-ferrous metals »

Welding regulations » Welding materials » Wire »

Welding regulations » Welding materials » Solders »

Welding regulations » Welding materials » Fluxes »

Standards for pipe fittings (TPA) » 10. Production » 10.7 Coatings »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 2 Tests for external factors » 2.2 Testing of manufacturing products »

ISO classifier » 25 MECHANICAL ENGINEERING » 25.220 Surface treatment and coating » 25.220.01 Surface treatment and coating in general »

National standards » 25 MECHANICAL ENGINEERING » 25.220 Surface treatment and coating » 25.220.01 Surface treatment and coating in general »

National Standards for KGS (State Standards Classification) » Latest edition » T General technical and organizational and methodological standards » T9 Unified system of protection against corrosion and aging of materials and products » T94 Metallic and non-metallic inorganic coatings »


As a Replacement Of:

GOST 9.301-78: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coating. Technical requirements

The Document References:

GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence

GOST 18242-72: Statistical acceptance inspection by alternative feature inspection plans

GOST 21930-76: Tin-lead solders in pigs. Specifications

GOST 21931-76: Tin-lead solders in the form of products. Specifications

GOST 2789-73: Surface roughness. Parameters and characteristics

GOST 9.302-88: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Control methods

GOST 9.303-84: Unified system of corrosion and ageing protection. Metallic and non-metallic inorganic coatings. General requirements for selection

GOST 9.402-2004: Unified system of corrosion and ageing protection. Paint coatings. Metal surface preparation for painting

GOST R ISO 2859-1-2007: Statistical methods. Sampling procedures for inspection by attributes. Part 1. Sampling schemes indexed by acceptance quality limit for lot-by-lot inspection

The Document is Referenced By:

GOST 10132-62: Diesel two-wire glow plugs. General specifications

GOST 10223-82: Batch-weighing dispensers of discrete action, balance and batch-weighing dispensers of continuous action

GOST 10223-97: Weighing batchers of periodic operation

GOST 10304-80: Rivets

GOST 10393-2014: Compressors, electrically driven compressor sets and compressor units for the railway rolling stock. General specifications

GOST 10461-81: Shake-proof washers with teeth. General specifications

GOST 10494-80: Studs for flanged connections with lens-shaped seals for pn - 10-100 MPa (100-1000 kgf/sq sm). Technical requirements

GOST 10495-80: Hexagon nuts for flange joints for pn above 10 to 100 MPa (above 100 to 1000 kgf/cm2)

GOST 10605-94: Hexagon nuts with thread diameter over 48 mm. Product grade B. Specifications

GOST 10607-94: Hexagon thin nuts (chamfered) with thread diameter over 48 mm. Product grade B. Specifications

GOST 10733-79: Mechanical wrist and pocket watches

GOST 10733-98: Mechanical hand and pocket watches. General specifications

GOST 10773-93: Grooved pins-full-length taper grooved. Specifications

GOST 10774-80: Cylindrical pins with drilled ends. Specifications

GOST 10778-83: Spatulos. Specifications

GOST 11074-93: Hexagonal socket flat-point set screws. Product grades A and B. Specifications

GOST 11075-93: Hexagonal socket dog-point set screws. Product grades A and B. Specifications

GOST 11214-2003: Windows of wood with glass. Specifications

GOST 11290-80: Circular woodworking groove cutters

GOST 11291-81: Carbide and hss tipped woodcutting disk grooving cutters

GOST 11447-80: Locking studs for Py 10-100 MPa (100-1000 kgf/cm2). Technical requirements

GOST 11476-79: Control cash machines. Specifications

GOST 1147-80: Wood details and articles for one-two storey dwelling and public buildings

GOST 11614-94: Semi-automatic flushing valves. Specifications

GOST 11737-93: Hexagon socket screw keys. Specifications

GOST 11871-88: Slotted round nuts, product grade A. Specifications

GOST 12.4.089-86: Occupational safety standards system. Building. Safety belts. General technical specifications

GOST 12.4.238-2013: Occupational safety standards system. Air breathing self-contained apparatus. General technical requirements and testing methods

GOST 12644-80: Hollow and semi-hollow rivets. Specifications

GOST 12850.1-93: Grooved pins-full-length parallel grooved with pilot. Specifications

GOST 12850.2-93: Grooved pins-full-length parallel grooved, with chamfer. Specifications

GOST 12850-80: Cylindrical notched pins with engaged ends. Sizes and technical requirements

GOST 12963-93: Suction nets. Specifications.

GOST 13.2.001-2001: Reprography. Copyrography. Electrophotographic document copying machines. General technical requirements

GOST 13350-78: Gsp conductivity liquid analyzers

GOST 13547-79: Butterfly valves for pnom up to 2.5 MPa (25 kgf/cm2)

GOST 13822-82: Generating sets and moving diesel-power stations. General specifications

GOST 13932-80: Combined arbor-type circular mills for woodcutting

GOST 13944-86: Retaining spring flat rings and grooves for them. Specifications

GOST 1405-83: Pinch and wrenching steel bars. Specifications

GOST 14227-97: Dish washing machines. General specifications

GOST 1476-93: Cone-point straight slatted set screws. Product grades A and B. Specifications

GOST 1477-93: Flat-point straight slotted set screws. Product grades A and B. Specifications

GOST 1478-93: Dog-point straight slotted set screws. Product grades A and B. Specifications

GOST 1479-93: Cup-point straight slotted set screws. Product grades A and B. Specifications

GOST 14803-85: Rivets (high precision). General specifications

GOST 14901-93: Moulds for the manufacture of industrial rubber articles

GOST 14965-80: Three-phase synchronous generators of power over 100 kw

GOST 15763-2005: Threaded and flange pipe connections for PN to 63 MPa (to 630 kgf/sq sm). General specifications

GOST 15987-91: Wooden bodied planes

GOST 16016-2014: Clamp bolts for rail track fastenings. Specifications

GOST 16016-79: Bolts and screw-nuts for rail track crossing

GOST 16017-2014: Inserted bolts for rail track fastenings. Specifications

GOST 16017-79: Inserted bolts for rail track fastenings.

GOST 16018-2014: Nuts for clamp and inserted bolts of rail track fastenings. Technical specifications

GOST 16018-79: Nuts for clamp and inserted bolts of rail track fastenings

GOST 16349-85: Cyclic mixers for building materials

GOST 16371-2014: Furniture. General specifications.

GOST 16371-84: Furniture. General requirements

GOST 16371-93: Furniture

GOST 16556-2016: Ground connections for movable electric units. General specifications

GOST 16556-81: Grounding rods for mobile electrical equipment

GOST 16809-78: Start-control devices for gas-discharge lamps. General specifications

GOST 16840-78: Pinned wire. Design and dimensions

GOST 16854-2016: Armchairs for auditoriums. General technical conditions

GOST 16854-91: Auditorium arm-chairs. General specifications

GOST 16940-89: Sanitary stretchers. General technical requirements and test methods

GOST 17019-78: Fixing parts for pipelines and cables. Specifications

GOST 17151-81: Cooking utensils made

GOST 17199-88: Fitter’s screwdrivers

GOST 17438-72: Pliers

GOST 17440-93: Sniper nose pliers

GOST 1757-76: Hoes. Specification

GOST 1759.0-87: Bolts, screws, studs and nuts. Specifications.

GOST 18103-84: Installations for manufacturing reinforced concrete three-dimensional elements of sanitary engineering cabins and lift shafts. Specifications

GOST 18123-82: Washers

GOST 18126-94: Bolts and nuts with thread diameter over 48 mm. General specifications

GOST 18142.1-85: Semiconductor power rectifiers of 5 plus kw capacity

GOST 18491-90: Spectacle frames for corrective eye glasses

GOST 18725-83: Integrated circuits. General specifications

GOST 18856-81: Apparatuses for inhalation anesthesia and artificial pulmonary ventilation

GOST 18981-73: Pipe toggle wrenches

GOST 19098-87: Plotters for computers

GOST 19119-80: Taper axially splitted pins. Specifications

GOST 19126-2007: Medical metallic instruments. General specifications

GOST 19147-82: Skiing sticks. Specifications

GOST 19263-73: Mains busways up to 1200 V, dc. General technical conditions

GOST 19445-93: Mechanical pencils. Part 1. Classification, dimensions, performance requirements and testing

GOST 19569-89: Steam medical sterilizers

GOST 19597-94: Garden rakes

GOST 19598-95: Lawn-and-garden hoes, grub-axes and cultivators

GOST 19681-2016: Sanitary and technical water fittings. General specifications

GOST 19681-83: Water mixing and distribution accessories for sanitary and laboratory applications. General technical requirements

GOST 19681-94: Sanitary technical water mixing and distributing accessories. General specifications

GOST 19734-80: Input control devices for residential and public buildings

GOST 20493-2001: Voltage detectors. General specifications

GOST 20494-2001: Insulating operative rods and rods for movable grounding. General specifications

GOST 20494-90: Operative insulating rods and portable grounding rods

GOST 2056-77: Sectional bed for military men. Specifications

GOST 20783-81: Metal trays for wiring

GOST 20790-93: Medical instruments, apparatus and equipment. General specifications

GOST 21424-93: Flexible couplings with rubber-bushed studs. Parameters and dimensions

GOST 21469-82: Drawing tools and sets thereof. Specification

GOST 21479-87: Case for stitching of operation and repair documentation. Construction

GOST 21485-2016: Flushing tanks with accessories. General specifications

GOST 21485-94: Flushing tanks with accessories. General specifications

GOST 21519-2003: Windows of aluminium. Specifications

GOST 21519-84: Windows, balcony doors, shop-windows and stained glass panels of aluminum alloys

GOST 21744-83: Multilayer metal bellows. General specifications

GOST 22011-90: Passenger and goods lifts. Specifications

GOST 22011-95: Passenger and freight elevators

GOST 22233-2001: Aluminium alloy extruded sections for translucent envelopes. General specifications

GOST 22233-2018: Aluminium alloy extruded sections for translucent envelopes. Specifications

GOST 22340-89: Medical electrical water stills

GOST 22376-77: One-sided leaves fixed by screws and rivets. Design and dimensions

GOST 22649-83: Medical air sterilizers

GOST 22685-89: Moulds for making control specimens of concrete. Specifications

GOST 22749-77: Form-relieved milling cutters

GOST 22848-77: Metals. Method for testing the impact strength at temperature from -100 up to -269 °C

GOST 22999-88: Portable hand-driven sprayers

GOST 23106-78: Longitudinal screw cap couplings. Basic parameters. Design and dimensions

GOST 2310-77: Steel bench hammers

GOST 23117-91: Semiautomatic grips for tensioning of the steel in prestressed concrete structures. Specifications

GOST 23173-78: Garden barrows. General technical conditions

GOST 23173-96: Garden wheel barrows

GOST 23190-2018: Book-selling furniture. General specifications

GOST 23190-78: Bookselling furniture. General requirements

GOST 23200-78: Pleasure row boats and motor boats. General requirements when delivering for export

GOST 23289-2016: Waste water drain sanitary accessories. Specification

GOST 23289-94: Waste water drain sanitary accessories. Specifications

GOST 23304-78: Bolts, studs, nuts and washers for flanged connections for atomic power plants. Technical requirements. Acceptance. Test methods. Marking, packing, transportation and storage

GOST 23350-83: Electronic wrist and pocket watches

GOST 23350-98: Electronic hand and pocket watches. General specifications

GOST 23476-79: Tramway and trolleybus overhead trolley wire supporting devices. General specifications

GOST 23496-89: Medical endoscopes

GOST 2361-74: Limiters for cases flap covers. Specifications

GOST 23707-95: Small tools for tillage

GOST 23747-2015: Door blocks of aluminium profiles. Specifications

GOST 23747-88: Doors of aluminium alloys. Specifications

GOST 23751-86: Printed circuit boards. Basic parameters of structure

GOST 23752-79: Printed circuit boards. General specifications

GOST 23979-2018: Subs for casing and tubing. Specifications

GOST 24104-88: General purpose and reference laboratory balances

GOST 24145-80: Domestic containers for bread. General specifications

GOST 24246-80: Box clutches. Basic parameters. Design and dimensions

GOST 24246-96: Box clutches. Parameters, design and dimensions

GOST 24308-2018: Utensils of copper-nickel alloy, german silver and brass with chrome or nickel coating. General specifications

GOST 24308-80: Utensils of copper-nickel alloy, nickel silver and brass with chrome or nickel coating

GOST 24320-2018: Utensils and covers of copper-nickel and copper-nickel-zinc alloys with silver or gold coating. General specifications

GOST 24320-80: Tableware made of cupronickel and nickel silver coated with silver or gold

GOST 24376-91: Semiconductor inverters

GOST 24607-88: Semiconductor frequency converters

GOST 24624-81: Hydraulic presses for gluing of soles to the footwear

GOST 24699-2002: Windows of wood with glass and glassing units. Specifications

GOST 24752-81: Trolley bus bars of voltage up to 1 000 v

GOST 24788-81: Enameled steel kitchen utensils.

GOST 25010-81: Howks for plastering. Specifications

GOST 25097-2002: Windows from wood and aluminium. Specifications

GOST 25148-82: Stationary dental units

GOST 25377-2015: Needles for injections for repeated use. Specifications

GOST 25377-82: Syringe needles for repeated use

GOST 25727-83: Letter and digital hand stamps

GOST 25779-90: Toys. General safety requirements and control methods

GOST 25804.4-83: Atomic power station technological processes control system equipment. General design-constructional requirements

GOST 25878-85: Steel moulds for reinforced concrete members. Pallets. Construction and dimensions

GOST 2593-2009: Coupling air brake hoses for railway rolling stock. Specifications

GOST 2593-2014: Hose connections for railway rolling stock. Specifications.

GOST 25982-83: Stomatologic tips for a microdrive

GOST 26140-84: Medical x-ray units

GOST 26141-84: Amplifiers of x-ray images for medical roentgen apparatuses

GOST 26145-84: X-ray medical cassettes

GOST 26161-89: Operating tables

GOST 26221-84: Scattering suppressing linear rasters for medical roentgen apparatuses

GOST 26272-84: Electronic-mechanical wrist and pocket watches

GOST 26346-84: Lighting buses for the ac voltage up to 660 v

GOST 26455-97: Semifixed disk couplings. Parameters, design and dimensions

GOST 26584-85: Motorcycle helmets

GOST 26613-2016: Lathe tools with mechanically clamped changeable indexable inserts. Specifications

GOST 26613-85: Lathe tools with mechanic fastening of replaceable faceted plates

GOST 26665-91: Metal bodied planes. Technical specifications

GOST 26756-2016: Furniture for trade enterprises. General technical conditions

GOST 26756-85: Furniture for trade enterprises. General specifications

GOST 26862-86: Rins. General specifications

GOST 27072-86: Diagnostic acoustic generators of signals. Audiometers

GOST 27598-94: Running rollers road vibration self-moving

GOST 27632-88: Accelerators of charged particles of industrial application

GOST 27636-95: Stone extraction and processing equipment

GOST 27735-94: Domestic scales

GOST 27788-88: Retention knobs for tool shanks with 7/24 taper design

GOST 28066-89: Ssi liquid chamber meters

GOST 28161-89: Means of stapling documents. General technical requirements

GOST 28162-89: Means for putting protection covers on documents. General technical requirements

GOST 28167-89: Semiconductor alternating voltage converters. General specifications

GOST 28241-89: Hand wise. Specification.

GOST 28369-89: Non-destructive testing. Ultra-violet irradiators

GOST 28408-89: Manual hoists and trolleys. General specifications

GOST 28426-90: Thermo diffusion strengthening and protection of metal products. General requirements for technological process

GOST 28433-90: Retrievers

GOST 28434-90: Overhead travelling stacker cranes

GOST 28456-90: Expansive dowels for building. General specifications

GOST 28487-2018: Thread shouldered connections with tool-joint thread of drill string elements. General technical requirements

GOST 28581-90: Mechanical and electrical typewriters

GOST 28617-90: Metallic and non-metallic inorganic coatings of bicycles, motor cycles, scooters, motor bicycles. General requirements and methods of control

GOST 28638-90: Bristle brush articles for household use. General specifications

GOST 28703-90: Automatic and semi-automatic instruments for indirect measurement of arterial pressure

GOST 28785-90: Preparative ultracentrifuges and rotors

GOST 28912-91: Filters for stores and filters-separators. Technical specifications

GOST 28919-91: Flange connections of wellhead equipment. Types, basic parameters and dimensions

GOST 28932-91: Drafting machines

GOST 28933-91: Drawing devices

GOST 28948-91: Laboratory tables for operation with radioactive substance. Specifications

GOST 28950-91: Drawing instruments. General technical requirements and test methods

GOST 29025-91: Non-destructive testing. X-ray television flaw detectors with X-ray electronic optical transducers electric radiographic flaw detectors. General technical requirements

GOST 29093-91: Umbrellas. General specifications

GOST 29130-91: Protective decorative coating accessories for products of light industry. General requirements

GOST 29211-91: Fibre pens. General technical requirements and test methods

GOST 29282-92: Writing units designed for boll-point pens. Specifications

GOST 29329-92: Balance for static weightings

GOST 30124-94: Weight meters and weighing batchers of continuous action

GOST 30176-95: Portable gas-turbine compressor stations of general purpose. General technical requirements

GOST 30414-96: Weighbridges for weighing of vehicles in motion. General technical requirements

GOST 30467-97: Design devices and the accessories of rolling stock breaks equipment. General requirements of safety

GOST 3050-77: Hose joints for flexible hoses

GOST 30540-97: The equipment for manufacture of products from cellular autoclaved concrete. General specifications and control methods

GOST 30646-99: Central conditioners of general use. General specifications.

GOST 30777-2001: Turned, reclined and turned-reclined devices for windows and balcony doors. Specifications

GOST 30777-2012: Turned, reclined, turned-reclined and sliding devices for windows and balcony doors. Specifications

GOST 30851.1-2002: Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB'S). Part 1. General rules

GOST 30894-2003: Production well head equipment. General technical requirements

GOST 31.0101.01-89: Hand wheels, rotating levers, handles, and knobs

GOST 31.0151.01-90: Universal and special-purpose setters

GOST 31.0171.01-91: Devices for metal cutting machine tools. Parts and assembly units of general application. General technical requirements

GOST 31.1066.03-97: Central arbors for exact operations

GOST 31.111.42-83: Parts and subunits of modular work tools for metal-cutting machines

GOST 31.121.42-84: Elements and assemblies of universal built-up and re-adjustable equipment for metal-cutting machines

GOST 31.211.42-93: Elements and assembly units of detachable fixtures for assembly and welding

GOST 31173-2003: Steel doors. Specifications

GOST 31173-2016: Steel doors. Specifications

GOST 31281-2004: Locking-sealing devices for transport and general and special purposes containers. General technical requirements

GOST 31283-2004: Indicators seals. General technical requirements

GOST 31284-2004: Air heaters for industrial and agricultural enterprises. General specifications.

GOST 31374-2009: Connection brake pipe with electrocontact 369A. Specifications

GOST 31445-2012: Steel and cast iron tubes and pipes with protective coatings. Technical requirements

GOST 31523-2012: Food processing machinery. Dough mixers. Specifications

GOST 31548-2012: Self-propelled road rollers. General specifications

GOST 31552-2012: Plate compactor. General specifications

GOST 31553-2012: Skid-steer loaders. General specifications

GOST 31556-2012: Cold self-propelled planers for road building purpose. General specifications

GOST 31589-2012: Ophthalmic optics. Spectacle frames for corrective eyeglasses. General technical requirements and test methods

GOST 31812-2012: Civil aviation aircraft and helicopter ground support equipment. General technical requirements

GOST 31835-2012: Well sucker-rod pumps. General technical requirements

GOST 32488-2013: Exterior wall panels of claydite-concrete for residential and public buildings. Specificatiоns

GOST 32623-2014: Automatic tensioning devices of overhead contact line of railway. General specifications

GOST 3262-75: Water-supply and gas-supply steel pipes Technical conditions

GOST 33115-2014: Electric generating plants with diesel and gas internal combustion engines. General specification

GOST 33116-2014: Generating sets driven by gasoline internal combustion engines. General specifications

GOST 33164.1-2014: Mining equipment. Longwall powered roof shocks. Section of support. General specifications

GOST 33164.3-2014: Mining and tunneling equipment. Timbering, mechanized. Hydraulic control systems. Safety requirements and methods of testing

GOST 33187-2014: Disk springs for rail joints. Specifications

GOST 33553-2015: Automobile transport facilities. Tips of low voltage wires. Requirements and test methods

GOST 33665-2015: Road ambulances. Technical requirements and test methods

GOST 33667-2015: Automobile transport facilities. The tips of the wires to the terminals of the batteries and starters. Requirements and test methods

GOST 33672-2015: Automobile transport facilities. Antiskid studs. Requirements and test methods

GOST 33712-2015: Erecting cranes. Load capacity limiters. General requirements

GOST 33713-2015: Erecting cranes. Registers of the parameters of work. General requirements

GOST 33726-2016: Static non-tractive converters for railway rolling stock. General specifications

GOST 33797-2016: Cross beams of rigid portals for overhead contact line of railway transport. General specifications

GOST 33852-2016: Pipeline valves. Knife gate valves for trunk pipelines. General specifications

GOST 34013-2016: Seat passenger railcar rolling stock and passenger cars with locomotive traction. General specifications

GOST 34016-2016: Cranes. Load-lifting attachment. Safety requirements

GOST 34029-2016: Pipeline accessories. Check fittings for main oil pipelines and oil product pipelines. General specifications

GOST 34293-2017: Pipeline valves. Metal ball valves for petroleum, petrochemical and allied industries. General specifications

GOST 34438.2-2018: Drill pipes and other drill string elements in the oil and gas industry. Part 2. The main parameters and control of threaded resistant connections. General technical requirements

GOST 34473-2018: Pipe fittings. Cranes spherical steel all-welded for water thermal networks. General technical conditions

GOST 3940-2004: Automotive engineering electrical equipment. General specifications.

GOST 3940-84: Electrical equipment for vehicles and tractors. General technical requirements

GOST 397-79: Split pins

GOST 4025-95: Domestic meat mincers. Specifications

GOST 4153-93: Pruning shears

GOST 4154-93: Pruning shears

GOST 4156-93: Pruning saws

GOST 4751-73: Screw rings. Specifications

GOST 4860.1-83: Glands for for electric cables and wires

GOST 5147-80: Joint clutches. Basic parameters. Design and dimensions

GOST 5147-97: Joint couplings. Parameters, design and dimensions

GOST 538-2001: Locks and building hardware. General specifications

GOST 538-2014: Locks and building hardware. General specifications

GOST 538-88: Lock and building hardware

GOST 5547-93: Engineer's and lineman's pliers. Specifications

GOST 5688-2015: Tools with carbide tips. Specifications

GOST 5688-61: Tools with carbide tips. Specifications

GOST 5799-78: Flasks for paints and varnishes. Specifications

GOST 6047-90: General purpose floodlights

GOST 6402-70: Lock washers. Specifications

GOST 6815-79: Mains and distribution busways up to 1000 V a.c. General specifications

GOST 6915-89: Instruments for measuring blood pressure within the cardiovascular system

GOST 703-76: Wall pendulum mechanical cloсk. General specifications

GOST 7040-93: Fire safety belt

GOST 7075-80: Manual Traveling Underrunning Cranes Specifications

GOST 7183-93: Foam mixers. Specifications.

GOST 7193-74: Hand induction anemometer. Specifications

GOST 7211-86: Cold chisels

GOST 7212-74: Cape chisels

GOST 7214-72: Bench piercers

GOST 7236-93: Flat-nose pliers. Specifications

GOST 7275-75: Adjustable wrenches

GOST 7283-93: Round nose pliers. Specifications

GOST 7360-2015: Drill-stem subs. Technical specification

GOST 7400-81: 7400-81

GOST 7498-75: Fire hydraulic elevator. Specifications

GOST 7498-93: Hydro elevators for firefighting. Specifications.

GOST 7502-89: Measuring metal tapes. Specifications

GOST 7502-98: Measuring metal tapes. Specifications

GOST 7742-77: Headlamps of working lighting for tractors and agricultural machines. General specifications

GOST 7837-76: Hunting, sporting shot and buck-shot

GOST 7948-80: Steel construction plumbs-lines. Specifications

GOST 809-2014: Track wood screws. General technical specifications

GOST 809-71: Track wood screws. Specifications

GOST 8107-75: Valves for pneumatic tubes and tyres with constant pressure. General specifications

GOST 8594-80: Installation boxes for switches and plug sockets for flush wiring

GOST 8709-82: Light boards for industrial and public buildings

GOST 8854-75: Typewriters. Types, type styles, shift distances. Specifications

GOST 8878-93: Hexagonal socket cone-point set screws. Product grades A and B. Specifications

GOST 9.302-88: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Control methods

GOST 9.303-84: Unified system of corrosion and ageing protection. Metallic and non-metallic inorganic coatings. General requirements for selection

GOST 9.309-86: Unified system of corrosion and ageing protection. Galvanic coating. Designation of dispersing ability of electrolytes during the creation of coverings

GOST 9.313-89: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings on the plastics. General requirements and technological operations

GOST 9.401-2018: Unified system of corrosion and ageing protection. Paint coatings. General requirements and methods of accelerated tests on resistance to the influence of climatic factors

GOST 9.402-2004: Unified system of corrosion and ageing protection. Paint coatings. Metal surface preparation for painting

GOST 9.402-80: Metal surface preparation for painting

GOST 9029-72: Fire turntable combined monitor

GOST 9413-78: Lighting panels for dwelling-houses. General specifications

GOST 9416-83: Building levels. Technical requirements

GOST 9500-84: Portable standard dynamometers

GOST 9509-74: Scales and dosimeters. Knife-edges and bearings of steel. General requirements

GOST 9533-81: Trowels, tuck pointing tools. Specifications

GOST 9650-80: Pins. Specifications

GOST ED1 21482-87: Single - layer measuring metal bellows. Specifications

GOST IEC 60309-1-2016: Plugs, socket-outlets and couplers for industrial purposes. Part 1. General requirements

GOST IEC 60884-1-2013: Plugs and socket-outlets for household and similar purposes. Part 1. General requirements and methods of tests

GOST IEC 61210-2011: Connecting devices. Flat quick-connect terminations for electrical copper conductors. Safety requirements

GOST ISO 4042-2015: Fasteners. Electroplated coatings

GOST R 12.4.013-97: Occupational safety standards system. Goggles. General specifications

GOST R 12.4.184-95: Occupational safety standards system. Safety belts. General technical requirements and test methods

GOST R 12.4.186-97: Occupational safety standards system. Air breathing self-contained apparatus. General technical requirements and testing methods

GOST R 18.12.02-2017: Technology of the aviation fueling. Installation of the aviation fuel supply typical schemes.General technical requirements

GOST R 18.12.03-2018: Technology of the aviation fueling. Filtering equipment in Aviation Fuel Supply. General technical requirements

GOST R 50072-92: Multiple slip joint pliers. Specifications

GOST R 50336-92: Grooved pins-full-length taper grooved. Specifications

GOST R 50337-92: Grooved pins-full-length parallel grooved with pilot. Specifications

GOST R 50338-92: Grooved pins-full-length parallel grooved, with chamber. Specifications

GOST R 50398-92: Fire hydraulic elevator. Specifications

GOST R 50399-92: Air-foam nozzles. Specifications

GOST R 50400-92: Hose branching. Specifications

GOST R 50401-92: Suction gauzes. Specifications

GOST R 50403-92: Countersunk head screws. Product grades A and B. Specifications

GOST R 50404-92: Slotted pan head screws. Product grades A and B. Specifications

GOST R 50405-92: Slotted cheese head screws. Product grades A and B. Specifications

GOST R 50406-92: Raised countersunk head screws. Product grade A and B. Specifications

GOST R 50408-92: Foam mixers. Specifications

GOST R 50409-92: Medium expansions foam-making branch pipes. Specifications

GOST R 50444-92: Medical instruments, apparatus and equipment. General specifications

GOST R 50592-93: Hexagon nuts with flange. Product grade A. Specifications

GOST R 50941-2017: Booth for the defence. General technical requirements and methods of testing

GOST R 50941-96: Booth for the defence. General technical requirements and methods of testing

GOST R 50959-96: Samovars (hot water boilers), using hard fuel. Specifications

GOST R 50997-96: Mine's gyrocompass. General specification

GOST R 51016-97: Sets of carbon steel and aluminium alloys. General specifications

GOST R 51017-97: Fire engineering. Wheeled fire extinguishers. General technical requirements. Test methods

GOST R 51078-97: Walking frames. Technical requirements and test methods

GOST R 51080-97: Rollotors. Technical requirements and test methods

GOST R 51083-2015: Wheelchairs for disabled persons. General specifications

GOST R 51083-97: Wheelchairs for disabled persons. General specifications

GOST R 51085-97: Elbow crutches. Requirements and test methods

GOST R 51191-98: Units of lower-limb prostheses. General technical requirements

GOST R 51223-98: Equipment for bank protection. Sluices for transfer of values. General specifications

GOST R 51224-98: Equipment for bank protection. Doors and manholes. General specifications

GOST R 51260-2017: Rehabilitation aids trainers. General technical requirements

GOST R 51260-99: Rehabilitation simulators for disabled persons. General specifications

GOST R 51261-2017: Support stationary devices for disabled persons. Types and technical requirements

GOST R 51261-99: Support stationary devices for disabled persons. Types and technical requirements

GOST R 51269-99: TV receiving aerials for television and sound broadcasting stations in VHF and UHF frequency bands. General technical requirements

GOST R 51632-2000: Technical aids for disabled persons. General technical requirements and test methods

GOST R 51632-2014: Technical aids for disabled persons. General technical requirements and test methods

GOST R 51666-2000: Cold self-propelled planers for road building purpose. General specifications

GOST R 51764-2001: Rehabilitation transportation boarding devices for disabled persons. General technical requirements

GOST R 51844-2001: Fire equipment. Fire-fighting cabinets. General technical requirements. Test methods

GOST R 51844-2009: Fire equipment. Fire-fighting cabinets. General technical requirements. Test methods

GOST R 51846-2001: Solid-state lasers and solid-state laser heads for wide application devices. General specifications

GOST R 51853-2001: Portable earthling connections. General specification

GOST R 51896-2002: Well sucker-rod pumps. General technical requirements

GOST R 51913-2002: Locking-sealing devices for transport and general and special purposes containers. General technical requirements

GOST R 51918-2002: The equipment for care of coordinates through the vertical mine. General technical requirements and test methods

GOST R 51922-2002: Plate compactor. General specifications

GOST R 51932-2002: Ophthalmic optics. Spectacle frames for corrective eyeglasses. General technical requirements and test methods

GOST R 51970-2002: Ski-poles for walk and sport race skiing. Specifications

GOST R 52077-2003: Indicators seals. General technical requirements

GOST R 52148-2003: Skid-steer loaders. General specifications

GOST R 52156-2003: Self-propelled road rollers. General specifications

GOST R 52230-2004: Electrical equipment for vehicles and tractors. General specifications

GOST R 52283-2004: Fire-fighting centrifugal pumps. General technical requirements. Test methods

GOST R 52286-2004: Push-chairs for carrying disabled persons. Main parameters. Technical requirements

GOST R 52502-2012: Venetian metals blinds-rollets. Specifications

GOST R 52567-2006: Road ambulances. Technical requirements and test methods

GOST R 52590-2006: Superhard tipped end milling cutters for machining wood materials and plastics. Specifications and safety requirements

GOST R 52747-2007: Vehicles. Antiskid studs. General specifications

GOST R 52786-2007: Hinge and pliers tools. Safety requirements and methods of test

GOST R 52854-2007: Bolts with star-type head and small flange. Specifications

GOST R 52855-2007: Bolts with star-type head and large flange. Specifications

GOST R 52868-2007: Cable tray systems and cable ladder systems for cable management. General technical requirements and test methods

GOST R 52906-2008: Equipment of the aviation fuelling system. General technical requirements

GOST R 53267-2009: Fire equipment. Fire snap hook. General technical requirements. Test methods

GOST R 53268-2009: Fire equipment. Fire safety belt. General technical requirements. Test methods

GOST R 53276-2009: Fire equipment. Hanging ladders for rescue from height. General technical requirements. Test methods

GOST R 53286-2009: Fire engineering. Automatic dry chemical fire fighting system. Module. General technical requirements. Test methods

GOST R 53288-2009: Automatic water and foam extinguishers systems. Automatic fire water mist spray extinguishers systems. Modules. General technical requirements. Test methods

GOST R 53291-2009: Portable and movable devices of fire extinguishing with high-velosity submission of fire quenching matter. General technical requirements. Test methods

GOST R 53384-2009: Steel and cast iron tubes and pipes with protective coatings. Technical requirements

GOST R 53429-2009: Printed circuit boards. Basic parameters of structure

GOST R 53466-2009: Optics and optical equipment. Medical thermographs. General technical requirements. Methods of measuring the major parameters

GOST R 53471-2009: Synchronous three-phase generators of power above 100 kW. General specifications

GOST R 53478-2009: Food processing machinery. Dough mixers. Specifications

GOST R 53543-2009: Aircraft and helicopter ground support equipment. General technical requirements

GOST R 53559-2009: Vehicles. Forced ignitions engine fuel filters and filter elements. General technical requirements

GOST R 53819-2010: Vehicles. Fastenings wheels. Technical requirements and test methods

GOST R 53842-2010: Automobile engines. Spark plugs. Technical requirements and test methods

GOST R 53844-2010: Vehicles. Fine filters of oil for automobile, tractor and combine engines. Technical requirements and test methods

GOST R 53925-2010: Pliers and nippers. General technical requirements, methods of control, tests

GOST R 53935-2010: Screwdrivers for fitting and assembling for recessed screws and wood screws. General technical requirements, methods of control and tests

GOST R 54391-2011: Utensils and covers from silver for children. Specifications

GOST R 54488-2011: Adjustable wrenches. Specifications

GOST R 54786-2011: Fastening parts for detachable connections of nuclear power plants. Specifications.

GOST R 54834-2011: Equipment for bank protection. Mobile cash operation terminals. General technical requirements

GOST R 54967-2012: Food processing machinery and equipment. Сutters. Safety and hygiene requirements

GOST R 54970-2012: Food processing machinery. Centrifugal devices for drying vegetables and fruits. Safety and hygiene requirements

GOST R 55020-2012: Pipeline valves. Knife gate valves for trunk pipelines. General specifications

GOST R 55186-2012: Cross beams of rigid portals for overhead contact line of railway transport. General specifications

GOST R 55511-2013: Pipeline valves. Electric actuators. General specifications

GOST R 55622-2013: Complex security systems. Hydraulic gun carriage trunks with Remote control. General technical requirements

GOST R 55756-2013: Integrated system of general technical requirements. Electronic components. General technical requirements

GOST R 55779-2013: Cases of cumulative punches. Technical conditions

GOST R 55995-2014: Seat passenger railcar rolling stock and passenger cars with locomotive traction. General specifications

GOST R 55998-2014: Petroleum and natural gas industries. Offshore production installation. Evacuation ways and temporary safe refuges. General requirements

GOST R 56028-2014: Fire engineering. Automatic gas-powder fire extinguishing systems. General technical requirements. Test methods

GOST R 56057-2014: LED light-optical systems for railway signal alarm. General technical requirements and test methods

GOST R 56138-2014: Upper limb prostheses. Technical requirements

GOST R 56328-2014: Medical equipment. Mobile complexes for medical purpose. General specifications and test methods

GOST R 56330-2014: Medical equipment. Technical means of placement and transfer of patients in the prehospital. General specifications and test methods

GOST R 56349-2015: Drill pipes and other elements of drilling equipment for petroleum and natural gas industries. Part 2. Basic parameters and inspection of thread shouldered connection. General technical requirements

GOST R 56356-2015: Metal shelving for archives. Specification

GOST R 56422-2015: Metal cabinets for storage of clothing. Specifications

GOST R 56513-2015: Metal cabinets for archives. Specifications

GOST R 56589-2015: Claydite-concrete heating main chutes. Specifications

GOST R 56674-2018: Casting cookware of aluminum alloys with non-stick coating. General specifications

GOST R 57214-2016: Glazing products for railway rolling stock. General specification

GOST R 57266-2016: Safes for storing drugs, psychotropic substances and their precursors. Requirements, classification and test methods

GOST R 57378-2016: Earthing rod for railway overhead contact system. Specifications

GOST R 57384-2017: Secure storage device. Fire resistance safes and cabinets. Classification and methods of fire resistance tests

GOST R 57764-2017: Support canes and crutches axillary. Technical requirements and methods of control

GOST R 57766-2017: Chairs with medical equipment. Types, technical requirements and methods of control

GOST R 58154-2018: Materials for substructure of hinged ventilated facade systems. General technical requirements

GOST R 58174-2018: Basket trolleys. Specifications

GOST R 58249-2018: Machines for planting, harvesting, post-harvest processing of potatoes. Technical requirements

GOST R 58281-2018: Crutches cane support. Technical conditions

GOST R 9.316-2006: Unified system of corrosion and ageing protection. Thermodiffusion of zinc coatings. General requirements and control methods

GOST R 9.318-2013: Unified system of corrosion and ageing protection. Nanostructure non-metallic inorganic coatings formed by microarc oxidation on aluminium and its alloys. General requirements and methods of control

GOST R 9.518-2006: Unified system of corrosion and ageing protection. Temporary corrosion protection during assembling operations. General requirements

GOST R 9.905-2007: Unified system of corrosion and ageing protection. Corrosion test methods. General requirements

GOST R ISO 7049-93: Cross recessed pan head tapping screws. Specifications

GOST R ISO 7050-93: Cross recessed countersunk head tapping screws. Specifications

GOST R ISO 7051-93: Cross recessed raised countersunk head tapping screws. Specifications

GOST R ISO 8741-93: Pins grooved-half-length reverse taper grooved. Specifications

GOST R ISO 8742-93: Pins grooved-third-length centre grooved. Specifications

GOST R ISO 8743-93: Pins grooved-half-length centre grooved. Specifications

GOST R ISO 8745-93: Pins grooved-half-length taper grooved. Specifications

GOST R ISO 8746-93: Pins grooved with round head. Specifications

GOST R ISO 8747-93: Pins grooved with countersunk head. Specifications

MDS 13-20.2004: Comprehensive methods for the inspection and energy audit of reconstructed buildings. Design Guide

MI 450-84: Exemplary measures of coating thickness. Cooking method

NPB 156-96: Fire engineering. Wheeled fire extinguishers. General reguirements and test methods

NPB 192-2000: Fire engineering. Communnication and lighting truck. General technical requirements. Test methods

NPB 316-2003: Portable and movable devices of fire extinguishing with high-velocity submission of fire quenching matter. Requirements of fire safety. Test methods

NPB 67-98: Automatic dry chemical fire fighting systems. Module. General technical requirements and test methods

NPB 80-99: Automatic fire water mist spray extinguishing systems. modules. General technical requirements. Test methods

ODM 218.2.002-2008: Recommendations for the design and installation of polymer bridge bearing parts

ODM 218.2.066-2016: Guidelines for the use of anchor piles and micropiles as part of the engineering protection of roads

ODM 218.2.087-2017: Recommendations for the design and construction of culverts of spiral-wavy metal corrugated pipes

ODM 218.4.002-2009: Recommendations for protection against corrosion of structures used on the roads of the Russian Federation bridges, fences and road signs

OSN-APK 2.10.03.001-04: Designing the integrated protection of reinforced concrete structures of industrial agricultural buildings and structures from the effects of corrosive environments

OST 108.004.10-86: Quality control program of nuclear energetics products.

OST 108.030.124-85: Details and prefabricated units made of pearlitic steels for pipelines with environment pressure P>2.2 MPa (22 kg/cm2) in nuclear power plants. General Specifications.

OST 13-158-83: Wooden returnable and reusable furniture container. Technical specifications.

OST 13-39-80: Products of cultural and community purpose, for kitchen and household use of wood and wood materials. General specification

OST 24.070.01-86: Products of mining machinery. General technical requirements.

OST 24.090.39-83: Shell stacker cranes. General specifications.

OST 26-04-1222-75: Products of cryogenic engineering. General technical requirements and standards.

OST 26-07-2065-85: Quality control program for nuclear thermal power plant special fittings.

OST 26-07-262-77: Studs, bolts, screws, nuts for piping fittings. General technical requirements (restriction as per GOST 20700-75, GOST 1759-70, GOST 18126-72).

OST 26-2043-91: Bolts, studs, nuts and washers for flanged joints. Technical requirements

OST 36-13-90: Shields and consoles of automation systems for technological processes. General technical conditions

OST 45.183-2001: stationary Installations of Electrical power of electrical connection apparatus. General technical requirements.

OST 48-41-91: Engineering products of non-ferrous metallurgy. General Specifications.

OST 68-11-96: Drawing instruments and devices for mapping. General specifications.

OST 68-12-97: Devices for forced centring of geodetic instruments. Types, main parameters and specifications.

OST 68-16-02: Cartographic instruments. General specifications

OST 95 227-92: Non-standardized products of general machine-building applications. General technical requirements.

PNST 320-2018: Bearing structures of railway signaling devices. General technical requirements

R 50.1.001-94: Multilevel printed boards. Design and use

R 50-112-89: Recommendations. Hardening coatings used in the manufacture and restoration of textile equipment parts and machines for the processing of chemical fibers

R 50-127-92: Recommendations. The designs are the basic carriers of radio-electronic means. Restrictive list of types of coatings

RD 153-34.0-04.185-2003: Machines and equipment for construction, technical re-equipment and repair of energy facilities. Requirements for design, materials, manufacturing, acceptance and testing

RD 153-34.1-17.461-00: Methodological guidelines for penetrant testing of welded joints, weld pads and parent metal during manufacturing, installation, operation and repairing of power equipment.

RD 22-207-88: Lifting machines. General requirements and production standards

RD 34.35.618: Explosionproof Indicating Electrical Contact Pressure Gauges Type VE-16rb. Guide to Overhaul

RD 39-0148311-601-85: Regulations on the system of maintenance and repair of electrical installations in oil production and drilling

RD 39-0148311-601-88: Regulations on the system of maintenance and repair of electrical installations in oil production and drilling. Part 1. General Provisions. Electrical equipment and power lines

RD 50-541-85: Guidelines for the implementation of the standards of the Unified System for the Protection of Products and Materials Against Corrosion, Aging and Biodeterioration (ESHSC) in industries

RD 50-708-91: The leading document on standardization. Instruction. Printed-circuit plates. Requirements to designing.

RK 34-38-025-87: Guide to Overhaul of Indicating Pressure Gauges for Precise Measurements Type MTI

RST RSFSR 516-88: Eaves metal. Technical conditions

RST RSFSR 605-89: Folding knives. General technical conditions

RST RSFSR 644-80: Prosthetic and Orthopedic Products. General Technical Specifications

RST RSFSR 655-81: Ice screws fishing. General technical conditions

RST RSFSR 656-81: Apparatus for processing vegetables and fruits. Technical conditions

RST RSFSR 91-78: Percussion musical instruments. General technical requirements

RST RSFSR 92-83: Musical wind instruments. General technical conditions

ST RK 1823-2008: Brake (electro-pneumatic brake) for passenger cars of 1520 mm gage. Specification

ST RK 1835-2008: Passenger railway car magnetic-rail brake. Specification

ST TsKBA 008-2014: Pipe fittings. Calculation and evaluation of reliability and safety at the design stage

ST TsKBA 012-2005: Pipe fittings. Studs, bolts, nuts and washers for pipe fittings. Technical requirements

ST TsKBA 015-2005: Pipe fittings. The program of quality control of fittings of nuclear power plants

ST TsKBA 042-2008: Pipe fittings. Electrolytic, chemical, anodic and diffusion coatings

ST TsKBA 087-2010: Pipe fittings. Electric drives. General technical conditions

ST TsKBA 088-2010: Pipe fittings. The quality control program of valves used for hydrogen sulfide environments

ST TsKBA 090-2013: Pipe fittings. Pneumatic actuators and hydraulic actuators. General technical conditions

ST TsKBA 099-2011: Pipe fittings. Repairs. Organization of repair and general repair manual

STA 25.03.009-2004: Means of alarm, fire and alarm-fire systems. General technical requirements and test methods

STB 1049-97: Light industry products. Safety requirements and control methods

STB 1575-2005: Mechanized timberings for benches. Basic parameters. General specifications. Test methods

STB 1679-2006: Cultivators for inter-row tillage. General specifications

STB 51.3.01-96: Equipment and facilities for banking. Cars for collection of cash proceeds and transportation of valuable cargo. Classification and general technical requirements

STB 813-93: Scissors. General specifications

TsPI 6/32: Technological indications of the coloring of metal structures of railway bridges in operation

TU 14-4-1731-92: Dowel-nails with zinc coated washers. Technical conditions

TU 2296-009-01297858-2005: Shelter protective cuff sealing

TU 24-00.10.019-88: Two-line manual lubricating station. Technical conditions

TU 25-1819.0021-90: Mechanical stopwatches "Glory" SDSpr-1-2-000, SDSpr-4b-2-000, SOSpr-6a-1-000

TU 2531-002-53597015-01: Face seal (rubber cuff) to protect the annular space at the junctions of main pipelines under roads and railways

TU 2531-005-01297858-2000: Sealing cuffs for pipelines over roads and railways laid in a protective case (casing)

TU 2531-007-01297858-02: Rubber-sealing cuffs for pipelines over roads and railways, laid in a protective case (casing)

TU 36-1496-85: Cable prefabricated structures. Technical conditions

TU 3645-002-16989527-99: PKN-03 Cutter for manual oxygen cutting

TU 3645-033-05785477-98: Torch propane-oxygen for powder surfacing GN-5P

TU 3742-001-10995136-98: All-welded ball valves. Technical conditions

TU 5216-055-00110604-2007: Fences, road, holding for cars of barrier type, road and bridge groups, one-sided and two-sided

TU 5270-001-44991977-97: Aluminum Alloy Windows and Doors

TU 5271-001-48810984-00: Window structures made of aluminum alloys for fencing balconies and loggias

TU U 29.4-30482268.002-2001: Check valves, flame arresters and shut-off valves, as well as their combinations for gas-flame treatment of metals types KO, OB, OT

GOST 10602-94: Hexagon head bolts with thread diameter over 48 mm. Product grade B. Specifications

GOST 11614-2019: Semi-automatic flush taps. Technical specifications

GOST 28465-2019: Devices for cleaning windshields of the driver’s cab of traction rolling stock. General specifications

GOST 34595-2019: Mining engineering. Pneumatic impulse cartridges. General technical requirements. Test methods

GOST 34610-2019: Pipe fittings. Electric drives. General specifications

GOST 34613-2019: Protective cabin. General technical requirements and test methods

GOST 34627-2019: Power semiconductor converters for diesel rolling stock. General parameters and general requirements

GOST R 51633-2019: Rehabilitation devices and appliances used by people with disabilities in residential premises. General technical requirements

GOST R 51764-2019: Rehabilitation lifting transport devices for disabled people. General technical requirements

GOST R 52283-2019: Fire fighting equipment. Centrifugal fire pumps. General technical requirements. Test methods

GOST R 52286-2019: Wheelchairs are transport rehabilitation. Main settings. Technical requirements

GOST R 53267-2019: Fire fighting equipment. Firefighter carbine. General technical requirements. Test methods

GOST R 58358.1-2019: Basic supporting structures of the first level of electronic equipment. General specifications

GOST R 58358.2-2019: Basic supporting structures of the second level of electronic equipment. General specifications

GOST R 58358.3-2019: Basic supporting structures of the third level of electronic equipment. General specifications

GOST R 58409-2019: Unpackaged complete distribution devices for voltage up to 35 kV for traction and transformer substations of the railway. General specifications

GOST R 58507-2019: Electric wheelchairs and scooter. General specifications

GOST R 58513-2019: Plumbing steel construction. Technical conditions

GOST R 58514-2019: Building levels. Technical conditions

GOST R 58515-2019: Trowel, shovels and cuts. Technical conditions

GOST R 58522-2019: Wheelchairs with a manual drive for disabled children. General technical requirements

GOST R 58616-2019: Pipe fittings. Regulating fittings for main oil pipelines and oil product pipelines. General specifications

GOST R 58618-2019: The main pipeline transport of oil and oil products. Tank equipment. Breathing and safety valves. General specifications

GOST R 58699-2019: Wood-aluminum window blocks. Technical conditions

GOST R 58702-2019: Guides Safety Requirements and Test Methods

GOST R 58708-2019: Gymnasiums for sports and multipurpose. Two-part dividing curtains. Technical requirements

GOST R 58714-2019: The main pipeline transport of oil and oil products. Pipelines from flexible flat sleeves. General specifications

GOST R 58728-2019: Dumbbells sports variable and constant weight. Technical specifications

GOST R 58774-2019: The external walls are frame-sheathed self-supporting and non-bearing with a frame made of cold-rolled steel galvanized profiles. General specifications

GOST R 58873-2020: Marine instrument glands for single electric cables input. Specifications

GOST R 58933-2020: Ring metal dowels for wooden structures. Specifications

GOST R 58934-2020: Plants for the manufacture of reinforced concrete volume blocks of sanitary cabins and elevator shafts. Specifications

GOST R 58936-2020: Optics and Photonics. Endoscopes and medical endotherapeutic devices. General technical requirements and test methods

GOST R IEC 62196-1-2013: Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles. Part 1. General requirements

Manual for MGSN 2.09-03: Corrosion protection of concrete and reinforced concrete structures of transport facilities

Manual for SNiP 2.03.11-85: Manual on the design of corrosion protection for stone, reinforced stone and asbestos-cement structures

Manual for SNiP 2.03.11-85: A manual for monitoring the state of building metal structures of buildings and structures in aggressive environments, conducting surveys and designing the restoration of corrosion protection of structures

Manual for SNiP 2.03.11-85: Designer's Guide to Corrosion Protection for Concrete and Reinforced Concrete Structures

NPB 101-2005*: Fire safety standards of the Republic of Belarus. The main fire trucks. General technical requirements. Test methods

NPB 163-97*: Fire fighting equipment. The main fire trucks. General technical requirements. Test methods

NPB 168-97*: Firefighter carbine. General technical requirements. Test methods

NPB 172-98*: Fire rescue belts. General technical requirements. Test methods

OST 37.001.163-97: Fingers. Technical specifications

PNST 369-2019: Mining engineering. Mining Explosion Systems. General technical requirements

ST RK 1489-2005: Fire fighting equipment. Fire extinguishing aerosol generators. General technical requirements. Test methods

Customers Who Viewed This Item Also Viewed:

Electromagnetic compatibility of technical equipment. Immunity of equipment for general lighting purposes to electromagnetic disturbance. Requirements and test methods
Language: English
Price: $218.25
Unified system for design documentation. Exploitative documents
Language: English
Price: $150.48
Еlectromagnetic compatibility of technical equipment. Harmonic current emissions (equipment input current <= 16 A per phase). Limits and test methods
Language: English
Price: $410.31
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
Language: English
Price: $714.89
Еlectromagnetic compatibility of technical equipment. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems. Equipment with rated current <= 16 A and not subject to conditional connection. Limits and test methods
Language: English
Price: $359.87
Pipeline valves. General safety requirements
Language: English
Price: $213.84
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
Conformity assessment system for the use of nuclear energy. Personnel in the non-destructive and destructive testing of metal. Requirements and qualification procedure Дата введения в действие 15.03.2018
Language: English
Price: $207.90
State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
Language: English
Price: $121.77
Unified system of corrosion and ageing protection. Paint coatings. Groups of operation conditions
Language: English
Price: $158.40
Atom stations. Equipment, instruments, means of monitoring and control systems. General technical requirements
Language: English
Price: $1,146.54
System of design documents for construction. Basic requirements for design and working documentation
Language: English
Price: $867.18
Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
Language: English
Price: $212.85
Non-destructive Testing. Welded Joints. Ultrasonic Methods
Language: English
Price: $140.58
Compilation and execution of safety data sheet of chemical products
Language: English
Price: $175.23
Cable products for nuclear power plants. Technical requirements of the operating organization
Language: English
Price: $449.11
Rolling stock of railways. Springs cylindrical screw. Certification requirements
Language: English
Price: $175.65
Loads and actions
Language: English
Price: $495.00
Technical Regulations of the Eurasian Economic Union "On Restriction of the Use of Hazardous Substances in Electrical and Radioelectronic Products"
Language: English
Price: $83.16
Degrees of protection provided by enclosures (IP Code)
Language: English
Price: $195.03

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!