SNiP II-58-75
СНиП II-58-75
|
|
Thermal power stations
Электростанции тепловые
Status: The document is not up to date. The current version of SP 90.13330.2012 is valid. Thermal power plants
Norms and rules should be observed when designing new and reconstructed thermal power plants (TPP): state district power plants (TPP) and combined heat and power plants (TPP) with units of 25 thousand kW and more
Нормы и правила должны соблюдаться при проектировании новых и реконструируемых тепловых электростанций (ТЭС): государственных районных электростанций (ГРЭС) и теплоэлектроцентралей (ТЭЦ) с агрегатами мощностью 25 тыс. кВт и более
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstroy of the USSR (State Committee of the Council of Ministers of the USSR for Construction),
11/25/1975
SKU: RUSS18454
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
3. Normative documents on urban planning, buildings and constructions »
k.31 Residential, public and industrial buildings and structures »
Technical Supervision »
Section I. Technological, construction, energy supervision and environmental protection regarding limitation of negative anthropogenic impact »
IV. Regulatory legal acts and regulations »
5. Safety of electrical and thermal installations and networks »
5.3. Safety of heat installations and networks »
Technical Supervision »
Section I. Technological, construction, energy supervision and environmental protection regarding limitation of negative anthropogenic impact »
IV. Regulatory legal acts and regulations »
4. Security of capital construction objects »
4.1. Federal State Construction Supervision »
PromExpert »
SECTION IV. INDUSTRIAL SAFETY »
II Industrial safety requirements for operation of a hazardous production facility »
3 Energy security »
3.3 Requirements for order of work on thermal power plants and heat networks »
ISO classifier »
27 ENERGY AND HEATING TECHNOLOGY »
27.100 Power stations in general »
As a Replacement Of:
SN 372-67: Guidelines for the construction of thermal power plants
SNiP II-I.8-62: Thermal power plants. Design Standards
The Document References:
GOST 10706-76: Electrically welded steel line-weld tubes. Technical requirements
GOST 14202-69: Pipe-lines of industrial plants. Identification coloring, safety signs and marking screens
GOST 19282-73: Low-alloyed plate strip universal steel. Specifications
GOST 8696-74: General-purpose electrically welded spiral seam steel pipes. Specifications
The Document is Referenced By:
GOST R 54860-2011: Heat supply of buildings. General guidelines of methods for calculation of energy requirements and efficiencies for heat supply systems
Manual for SNiP 2.07.01-89: Power supply of settlements
Manual for SNiP 2.07.01-89: Heat and gas supply of settlements
Manual for SNiP 2.07.01-89: Water and Sewerage Manual for Urban and Rural Settlements
Manual for SNiP 2.07.01-89: A guide for the design of urban (local) telephone networks and wired broadcast networks of urban and rural settlements. Dispatching engineering equipment systems
MDS 31-13.2007: Design guidelines for the safety and comfort of industrial buildings
Order 1112: On Amending Order No. 687 of the Federal Agency for Technical Regulation and Metrology of April 2, 2020
P 06-82/VNIIG: Recommendations for the design and hydraulic calculations of pumping units and water paths of technical water supply systems of TPP and NPP of high power
POT R O 29-001-93: Labor protection regulations for printing companies
POT R O-001-2002: Rules on labor protection for printing organizations
POT R O-29-002-94: Occupational Safety Rules for Publishers
POT R O-29-003-95: Occupational Safety Rules for Bookstores
RD 12-VEP: Methods of conducting technical audits of existing centralized heat supply systems (RC audit of the Center)
RD 153-34.1-03.352-99: Explosion Safety Requirements for Fuel Supply and for Facilities for the Manufacturing and Combustion of Powder Fuel
RD 210.006-90: Rules for the technological design of nuclear power plants (with VVER reactors)
RD 34.03.201-97: Safety Code for the Operation of the Thermo mechanical Equipment of Electric Power Stations and Heat Networks.
RD 34.03.355-90: Explosion Safety Guidelines for the Design and Operation of Gas Turbines
RD 34.09.210: Procedural Guidelines for Standardization of Heat Consumption for Heating and Ventilating of Process Buildings of Thermal Power Stations
RD 34.21.363-95: Procedural Guidelines for Inspection of Production Buildings and Structures at Thermal Power Plants Under Rehabilitation
RD 34.21.528: Model Guidelines for Operation of Central Air Conditioning Systems and Steam-Water Ejector Refrigerators
RD 34.44.101-96: Model Guidelines for Storage of Coal, Oil Shales, and Milled Peat at Outdoor Storage Facilities of Electric Power Generating Stations
RD 34.44.102-97: Guidance on the design of farms for liquid fuel for gas turbine and combined cycle power plants of TPP RAO "UES of Russia", 08/25/97
RD 34.49.104-91: Recommendations for the design of automatic water extinguishing systems for oil power transformers
Resolution: Rules for the design and safe operation of steam and hot water boilers
RTM 34-9TEP-04-79: Rules for the design of heating and ventilation (dust removal and cleaning of rooms) of the fuel supply paths of thermal power plants
SO 34.03.355-2005: Methodological instructions for ensuring fire and explosion safety during operating power gas turbine electric power units.
SO 34.49.101-2003: Regulations on the design of fire protection of power enterprises
SO 34.49.505-2003: Regulations for fire retardant coating for building constructions of buildings and facilities of power engineering enterprises
VNTP 03-91: Departmental standards of technological design of sugar beet factories. Volume 2, Part 1. Appendices
VNTP 17-5875-80/MChM SSSR: Instructions and norms for technological design and technical and economic indicators of the energy sector of ferrous metallurgy enterprises. Separate enterprises of metallurgical production. Volume 27. Coke-chemical enterprises
VNTP 81: Engineering Design Standards for Thermal Power Plants (VSN 29-81)
Zh3-140: Design recommendations for remedial water treatment
Zh3-150: Recommendations for compiling questionnaires for ordering equipment and fittings for water treatment plants
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.