GOST 11268-76
ГОСТ 11268-76
|
|
Structural thin sheets of special purpose alloyed high quality steel
Сталь тонколистовая конструкционная легированная высококачественная специального назначения
Status: Effective - Supersedes. The limitation of the effectiveness period has been lifted: Protocol No. 4-93 of the IGU dated 10.21.93 (IUS 4-1994)
The standard applies to hot-rolled and cold-rolled sheet products from alloyed stainless steel, special-purpose, manufactured in sheets up to 3.9 mm thick and used in a heat-treated condition.
Стандарт распространяется на горячекатаный и холоднокатаный листовой прокат из легированной высококачественной стали, специального назначения, изготовляемый в листах толщиной до 3,9 мм и применяемый в термически обработанном состоянии.
Choose Language:
Format: Electronic (pdf/doc)
Approved: USSR State Committee for Standards,
12/24/1976
SKU: RUSS18472
The Product is Contained in the Following Classifiers:
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.12 Testing and control of products of metallurgical industry »
4.12.4 Iron and steel products »
ISO classifier »
77 METALLURGY »
77.140 Iron and steel products »
77.140.20 Stainless steels »
National standards »
77 METALLURGY »
77.140 Iron and steel products »
77.140.20 Stainless steels »
National Standards for KGS (State Standards Classification) »
Latest edition »
V Metals and metal products »
V3 Steel quality and high quality (quality stock) »
V33 Sheets and Stripes »
National Standards for OKSTU »
FINISHED ROLLED STEELS (INCLUDING BILL FOR EXPORT) »
Structural steel sheets, cold-rolled and pickled »
As a Replacement Of:
GOST 11268-65: Structural thin sheets of special purpose alloyed high quality steel. Technical requirements
The Document References:
GOST 10510-80: Metals. Erikson test method for sheets and strips extrusion
GOST 11701-84: Metals. Methods of tensile testing of thin sheets and strips
GOST 12344-88: Alloyed and high-alloyed steels. Methods of carbon determination
GOST 12345-2001: Alloyed and high-alloyed steels. Methods of sulphur determination
GOST 12345-88: Alloyed and high-alloyed steels. Methods of sulphur determination
GOST 12346-78: Alloyed and high-alloyed steels. Methods of silicon determination
GOST 12347-77: Alloyed and high-alloyed steels. Methods for determination of phosphorus
GOST 12348-78: Alloyed and high-alloyed steels. Methods of manganese determination
GOST 12349-83: Alloyed and high-alloyed steels. Methods for determination of tungsten
GOST 12350-78: Alloyed and high-alloyed steels. Methods of chromium determination
GOST 12351-81: Steels alloyed and highalloyed. Methods for the determination of vanadium
GOST 12352-81: Steels alloyed and highalloyed. Methods for the determination of nickel
GOST 12353-78: Alloyed and high-alloyed steels. Methods of cobalt determination
GOST 12354-81: Steels alloyed and highalloyed. Methods for the determination of molybdenum
GOST 12355-78: Alloyed and high-alloyed steels. Methods of copper determination
GOST 12356-81: Steels alloyed and highalloyed. Methods of the determination of titanium
GOST 12365-84: Steels alloyed and highalloyed. Methods for the determination of zirconium
GOST 14192-96: Cargo marking
GOST 1497-84: Metals. Methods of tension test
GOST 15846-79: Products for transportation to the areas of the far north and remote regions
GOST 162-90: Depth gauges. Specifications
GOST 166-89: Vernier callipers. Specifications
GOST 1763-68: Steel. Methods for determination of decarbonised layer depth
GOST 18895-81: Steel. Method of photoelectric spectral analysis
GOST 18895-97: Steel. Method of photoelectric spectral analysis
GOST 19903-74: Hot-rolled steel sheets. Dimensions
GOST 19904-90: Cold-rolled steel sheets. Dimensions
GOST 2216-84: Adjustable smooth snap gauges
GOST 24597-81: Unitized tared and piece goods cargoes. Main parameters and dimensions
GOST 26663-85: Transport packets. Formation by packaging means. General technical requirements
GOST 26877-91: Metal products
GOST 28473-90: Iron, steel, ferroalloys, metal chromium and metal manganese. General requirements for methods of analysis
GOST 3749-77: Checking 90° squares. Specifications
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 4543-71: Structural alloyed steel
GOST 5378-88: Vernier protractors. Specifications
GOST 5639-82: Steel and alloys. Methods for detection and determination of grain size
GOST 5640-68: Steel. Metallographic method for determination of microstructure of sheets and bands
GOST 6507-90: Micrometers. Specifications
GOST 7502-89: Measuring metal tapes. Specifications
GOST 7502-98: Measuring metal tapes. Specifications
GOST 7564-73: Steel. General rules of samples, blanks and test pieces for mechanical and technological tests
GOST 7564-97: Rolled products general rules of samples, rough specimens and test pieces selection for mechanical and technological testing
GOST 7565-81: Iron, steel and alloys. Sampling for determination of chemical composition
GOST 7566-81: Rolled stock and products for further treatment
GOST 7566-94: Metal products
GOST 8.001-80: State system of ensuring the unity of measurements. Rules for conducting the state tests of measuring means
GOST 8.326-89: State system for ensuring the uniformity of measurements. Metrological certification measuring instruments
PR 50.2.009-94: The testing and approval procedure for the measurement instrumentation
The Document is Referenced By:
GOST 11269-76: Universal rolled plates and wide strips made of special purpose structural high-grade Alloy steel
GOST 21729-76: Construction cold-shaped and heat-shaped carbon and alloy steel pipes. Specification.
GOST 27702-88: Steel and alloys. Unified grades
RD 22-16-2005*: Guiding regulatory material. Hoisting machines. Selection of materials for the manufacture, repair and reconstruction of welded steel structures
RST RSFSR 656-81: Apparatus for processing vegetables and fruits. Technical conditions
RTM 24-85: Information index of state, republican and industry standards, technical specifications for materials and products used in the design of furnaces and dryers
Customers Who Viewed This Item Also Viewed:
 |
State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure
Language: English |
Petroleum products. Method for measurement of viscosity by automatic capillar viscosimeter
Language: English |
Greases. Method for determination of ultimate strength and thermostrengthening
Language: English |
Electric heating devices for heating rolling stock railways. Safety requirements and test methods
Language: English |
Ice cream. General technical requirements
Language: English |
Pipe fittings. Ball valves made of brass. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.