GOST 12893-83
ГОСТ 12893-83
|
|
Single-seated, double-seated and cage control valves.
Клапаны регулирующие односедельные, двухнедельные и клеточные
Status: Not effective - Superseded
The standard applies to regulating single-double-seat and cellular valves for general industrial purposes (except for valves for nuclear power plants) automatic process control systems, manufactured with pneumatic diaphragms and electric actuators, as well as remotely controlled actuators.
Стандарт распространяется на регулирующие одно-двухседельные и клеточные клапаны общепромышленного назначения (кроме клапанов для атомных энергетических установок) систем автоматического регулирования технологических процессов, изготавливаемые с пневматическими мембранами и электрическими исполнительными механизмами, а также с дистанционным управлением исполнительными механизмами.
Choose Language:
Format: Electronic (pdf/doc)
Approved: USSR State Committee for Standards,
4/6/1983
SKU: RUSS18479
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
23 Hydraulic and pneumatic systems and components for general use. »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.13 Testing and control of products of engineering industry »
4.13.1 Machinery, equipment and components for general engineering applications »
4.13.1.1 Components and assembly units for general engineering applications »
ISO classifier »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.060 Pipe fittings »
23.060.40 Control valves »
National standards »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.060 Pipeline valves »
23.060.40 Control valves »
National Standards for KGS (State Standards Classification) »
Latest edition »
G Machines, equipment and tools »
G1 General parts and units of machines »
G18 Fittings and pipeline connections »
The Document is Replaced With:
GOST 12893-2005: Single-seated, double-seated and cage control valves. General specifications
As a Replacement Of:
GOST 12893-67: The valves regulating two-seat valves with a pneumatic diaphragm actuator flanged to PN 16, 40 and 64 kgf / cm2. Technical requirements
GOST 16559-71: Control valves for double-seat cast iron with an electric actuator for Pd 16 kgf / cm2
The Document References:
GOST 10198-91: Wooden boxes for weights of mass over 200 up to 20000 kg. General specifications
GOST 10549-80: Screw thread runout. Washout threads, total thread runouts, undercuts and chamfers
GOST 12.2.063-81: Occupational safety standards system. Industrial pipeline valves. General safety requirements
GOST 12815-80: Flanges for valves, fittings and pipelines for Pnom from 0,1 to 20 MPa (from 1 to 200 kgf/sq sm). Types. Connecting dimensions and dimensions of sealing surfaces
GOST 12816-80: Flanges for valves, fittings and pipelines for Pnom from 0,1 to 20 MPa (from 1 to 200 kgf/sq sm). General technical requirements
GOST 13373-67: Actuating pneumatic diaphragm-spring straight motion mechanisms SSI. Types. Basic parameters and dimensions
GOST 14192-96: Cargo marking
GOST 14691-69: Control devices for automatic regulation systems. Terms
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 16093-2004: Basic norms of interchangeability. Metric screw thread. Tolerances. Clearance fits
GOST 16093-81: Basic norms of interchangebility. Metric screw thread. Tolerances. Clearance fits
GOST 162-90: Depth gauges. Specifications
GOST 16587-71: Safety valves, control valves and pressure regulators. Face-to-face lengths
GOST 166-89: Vernier callipers. Specifications
GOST 23866-87: Single-seated, double-seated and cellular
GOST 24054-80: Engineering and instrument production items. Leak detection methods. General requirements
GOST 2405-88: Pressure gauges, vacuum gauges, pressure-vacuum gauges, pressure meters, draft gauges and draft-pressure gauges
GOST 24643-81: Basic norms of interchangeability. Tolerances of form and position of surfaces. Numerical values
GOST 24705-2004: Вasic norms of interchangeability. Metric screw thread. Basic dimensions
GOST 24856-81: Industrial pipeline fittings. Terms and definitions
GOST 25670-83: Basic norms of interchangeability. Limit deviations of dimensions without tolerance indication
GOST 29329-92: Balance for static weightings
GOST 2991-85: Wooden uncollapsible cases for weights up to 500 kg. General specifications
GOST 356-80: Valves and details for piping. Pressures conditional, test and operational. Lines.
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 4666-75: Valves. Marking and distinctive painting
GOST 577-68: Clock-type dial indicators graduated in unit divisions of 0,01 mm. Specifications
GOST 6527-68: Female ends with pipe cylindrical thread. Dimensions
GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements
GOST 9150-2002: Basic norms of interchangeability. Metric screw threads. Profile
The Document is Referenced By:
GOST 12893-2005: Single-seated, double-seated and cage control valves. General specifications
GOST 23866-87: Single-seated, double-seated and cellular
GOST 5761-2005: Valves for nominal pressure at most PN 250. General specifications
GOST 9697-87: Stop valves. Main parameters
GOST 9698-86: Gate valves. Main parameters
GOST R 55018-2012: Pipeline valves for objects of energetics. General specifications
OST 26-07-794-73: General purpose cryogenic pipeline fittings. General specifications.
RD 112 RSFSR-023-89: Guidelines. GSE. Capacity technological pipelines. Measurement Technique
RD 12-331-99: Ordinance on Industrial Safety Conformity Assessment at Gas Supply Facilities
RD 24.207.13-90: Pipe fittings. Methods of experimental determination of the coefficients of resistance and throughput
RD 26.260.010-2002: The leading document on standardization. The list of standard documentation on standardization on the cells and devices working under pressure.
RD 26.260.010-97: List of Regulatory Documents on Standardization for Pressure Vessels and Apparatus
RD 39-0148306-413-88: Method for calculating fugitive emissions from gas processing plants
RD RTM 26-07-33-99: Pipe fittings. Methods of experimental determination of cavitation characteristics
ST TsKBA 006-2003: Pipe fittings. Cryogenic fittings. General technical conditions
ST TsKBA 036-2007: Pipe fittings. Tables of figures and legend. Directory
|
Customers Who Viewed This Item Also Viewed:
 |
Jet fuels
Language: English |
Chill moulds. Ventilation channels. Dimensions
Language: English |
Laminated glued wood. Methods for determination of ultimate and modulus of elasticity in static bending
Language: English |
Microbiology of food and animal feeding stuffs. Methods for detection and enumeration of sulphite-reducing bacteria growing under anaerobic conditions
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
